Inserting Cell Values Into A Textbox
Feb 16, 2007
how to insert the value of a single cell into a text box... is it possible to insert a range of cells into a text box, and keep the same formatting, spacing, control boxes etc?
Reason behind this:
I have some information in a range of cells, let's say A10:D20 and I want to have a nice fill colour for that range... my thoughts were to copy this data into a text box, and use the fill properties to make it look pretty. but I've found that I can't do that..
My next attempt was to set the transparency of the text box to 100%, put some fill in it with a nice orange colour, and place the text box over the cells I wanted to look pretty... When I did this, it worked ok for the cells in the lighter portion of the colour, but when the colour became darker it would block the cell data underneath it...
View 3 Replies
ADVERTISEMENT
Mar 20, 2014
I have the names of companies in one column, and the amount they owe in cells in the column beside them. I then have a second list of companies that is a subset of the first. Is there a formula that would place the amount they owe in teh corresponding cell adjacent to the compny in the second list? I've attached a sample workbook, Full Company List in column A, amount owing in B, trimmed down list in D and ideally I'd like the corresponding values in E.
View 3 Replies
View Related
Jul 24, 2008
I'd like help writing a single formula that assigns either a numerical 1 or 0 to a cell based on values from two other cells.
By way of background, I'm working with three columns. Cells in column F contains values from 1 to 4. Cells in column G contain values from 5 to 11. Cells in column H are currently blank.
I need a single formula that will insert either a numerical 1 or a 0 into column H according to the following conditions.If F3 = 1 and G3 = 5 or 6 or 7 then let H3=1 otherwise let H3=0
If F3 = 2 and G3 = 7 or 8 or 9 then let H3=1 otherwise let H3=0
If F3 = 3 and G3 = 9 or 10 or 11 then let H3=1 otherwise let H3=0
If F3 = 4 and G3 = 9 or 10 or 11 then let H3=1 otherwise let H3=0
View 11 Replies
View Related
Aug 7, 2009
I have a userform that contains a textbox. How can I insert a "hard return" in the text portion to include a blank line between paragraphs?
View 2 Replies
View Related
Dec 28, 2011
I am trying to build a simple tool using an userform. I have my results as a range of cells A1:A10 in an excel sheet. The result will be like:
1-1
2-4
5-8
8-8
9-14
14-14
15-16
17-19
20-21
22-23
But I want the result to be displayed in one textbox in userform.Is there any way?
View 4 Replies
View Related
Sep 13, 2006
I know that I can enter =$A$1 in a text box. But is there any way to concatenate more data with it. I would like to hase something like.
="Bill " & $A$1 & " Gates"
but Excel will not allow.
View 5 Replies
View Related
Dec 28, 2013
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
View 1 Replies
View Related
Jun 5, 2014
I have set of user-form contains with Combox & 2 textbox and to generate report one cmd button
I have 3 different sheet contains report of daily activities ( Dispatch,Closed,Cancel)
If Dispatchcalls Select In Combobox1 ,Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from dispatchcalls Then Save Data Into Excel File As "Dispatchcalls".
If Closedcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Closedcalls Save Data Into Excel File As "Closedcalls".
If Cancelcalls Select In Combobox1 Then Filter Start And End Date In Two Textboxes Then Click Cmd" Export Data To Excel"Extract Data from Cancelcalls Save Data Into Excel File As "Cancelcalls".
"C:UsersmaniDesktopNew folderLenvo_ReportsONSITE CasesVlokupuf" This is path i stored existing 3 file dispath,closed,cancel
View 3 Replies
View Related
Nov 22, 2012
I have a userform containing 3 textboxes, to calculate derivatives.
User enters two integers in textbox1 and textbox2; and to textbox 3, I need to transfer these values but with a little issue.
For example, user entered 3 to textbox1 and 5 to textbox2. In textbox 3, it needs to show 3x^5.
For example, user entered 7 to textbox1 and 2 to textbox2. In textbox 3, it needs to show 7x^2.
So "x" and "^" are our defaults in textbox3.I tried to transfer the numbers that the user enters to cells A1 and A2, -I don't know if this works- but I don't know how to call them to change the text in the textbox.
View 2 Replies
View Related
Mar 17, 2009
I need to replace the values in the braces with the values in Column A. Is there an easy way to do this or am I stuck with doing each one manually? There are 92 lines in Column A.....
View 9 Replies
View Related
May 7, 2009
I'm Working on a sign-in sheet for the employees at my office...
I'm looking for a way to insert the current time as a value without having to copy and paste special (values).
View 9 Replies
View Related
May 14, 2007
I'm running in to some problems on creating a Userform. I will try to explain it as best as possible. Right now I have a userform set up with 2 ComboBoxes. Here is my current code. It's not near complete.
Private Sub CommandButton1_Click()
Set ufStart = Worksheets("Data"). Range("AP4")
Set valNames = Worksheets("MasterData").Range("AA6")
Set valMonths = Worksheets("MasterData").Range("H3")
Set SelMonth = ComboBox2.ListIndex
Set SelName = ComboBox1.ListIndex
If TextBox1.Value > 0 Then
ufStart.Offset(SelName, SelMonth).Value = TextBox1
Else: End If
End Sub
The way it's supposed to go, is if TextBox1.Value is greater then 0... then go to UfStart and Offset by Row, which is ComboBox1 Selection Index Value and by Column, which is ComboBox2 Selection Index Value. I can't get the sub to get past Set SelMonth = ComboBox2.ListIndex.
View 6 Replies
View Related
Feb 24, 2014
Month Pay Tax Socia sec.tax
Jan 10000 2000 2999
Feb 15000 3499 3333
March 3455 222 333
I have an excel document with sheets representing employees and within the sheets it shows wages taxes nd social security tax for each month.
I want to create word documents for each month which inserts all the values for that particular month, aswell as the name of the employee into th word document. How to do this?
View 1 Replies
View Related
Mar 30, 2007
I have a problem with a certain tool that i've been trying to develop.
I have two sheets in my workbook. In the first one i choose a value from a list (in cell A2). After the value in the list is chosen, certain integers for that value appear in the right columns. (with blanks between them)
Next, I will press a button called "calculate" which works like this: If A2 can be found in Sheet 2 Column "Value" then the macro overwrites the integers found at the right of the A2 from those found in Sheet1.
If Sheet1(A2) is not found in the Column "value" then a new line is inserted at the end of the table like this.
A 1 3 6
Pls help me with this, I have a very close deadline and I don't think I can pull this off by myself in such little time.
View 9 Replies
View Related
Apr 12, 2007
We have a scenario like this:
1. Data (Let's say 5 fruit names are entered) will be entered in sheet1 (row wise)
2. Data (Let's say 5 flowers names are entered) will be entered in sheet2 (row wise)
2. Entered data in sheet1 and sheet2 should get automatically populated in sheet3 under respective headers (header 1 - fruits and header 2 - flowers)
Rules : 1. We will have Headers with one default empty row
2. With addition of every row in sheet1 or sheet2, a row should automatically inserted in sheet3 under respective headers and populate data.
View 6 Replies
View Related
Aug 23, 2009
I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”.
I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.
View 9 Replies
View Related
Nov 1, 2013
I'm Trying to change the value of a row when a determine condition happens, and I was thinking of doing it after the insert was made, but maybe it's easier before the insert (?) The thing is i've tried both, and i'm doing it wrong because it's not working
Code:
With ThisWorkbook.Worksheets("Site Configuration List")
.Range("A").EntireRow.Offset(1, 0).Insert
' Tried this .Range("A").EntireRow.Interior.Color = 49407
[Code].....
Obviously not at the same time, but no of those work. The call to the sub where the code above is implemented, is inside a loop, however, with each one of the things I've tried, when it gets to the line the program just stops. No error or anything.
View 7 Replies
View Related
Oct 13, 2006
I am working on formatting a spreadsheet report where the values will change in column A. Here is what I would like to do via a Macro. Compare the cells in column A (e.g., compare A2 to A3, compare A3 to A4, and so on). If the values between the two cells in column A are different, insert three blank rows and set the active cell to the next cell following the blank lines. Example:
if cell A5 is different from A6, insert three blank rows below row 5 and new active cell is now A9 and the comparison would start again. I have been trying to code the macro for this but with no success. Here is the macro I have been working on.
Sub Macro1()
Const NumRow As Integer = 3
Dim StartCell As Range
Dim RowNR, NewCnt As Long
Dim RowCount As Long
Dim Count As Long
Dim intRow As Integer
Dim bFmtComplete As Boolean
RowCount = Application.WorksheetFunction.CountA _
(Range("A1", Range("A" & Rows.Count).End(xlUp)))
bFmtComplete = False
RowNR = 2
Range("A1:J1").Select
' Rows("1:1").Select
Selection.Copy................
View 4 Replies
View Related
May 18, 2006
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
View 2 Replies
View Related
Jun 4, 2014
I have a text box and a command button, if i pass some specific values it will give me a message but when the given value is entered it states " run time error, mismatch ". My code is below
Should I change the text properties?
[Code] .....
View 3 Replies
View Related
May 22, 2014
I have textbox1 through textbox8 and all have a number value controlled by their respective spinbutton. The total of those txtbox's adds up into textbox 9, but I currently have a command button to sum the value. would I would like is textbox 9 to update as I'm updating txtbox 1-8 automatically. let me know if possible
View 1 Replies
View Related
Oct 25, 2009
The Code will not add the found values into the userform textboxe's.
View 14 Replies
View Related
Jul 26, 2013
Is there a macro that will copy the values in a textbox (TextBox1) to the clipboard so they can be pasted into an access database?
View 1 Replies
View Related
Nov 25, 2007
What is the best way to check to be sure that a text box contains numeric values prior to performing calculations?
I have a form that has many textboxes which a user enters values into to perform calculations. I want to make sure that each necessary field contains a numeric value prior to performing the calcuations.
This is what I have so far but for some reason it keeps giving me the message box:
If WorksheetFunction.IsNumber(Me.specGrav_txt) = True And _
WorksheetFunction.IsNumber(Me.pAngle_box) = True And _
WorksheetFunction.IsNumber(Me.pLength_box) = True And _
WorksheetFunction.IsNumber(Me.pSize_box) = True And _
WorksheetFunction.IsNumber(Me.pQty_box) = True And _
pModTrap_btn.Value = True Then
PrimMTcalc
Else
If WorksheetFunction.IsNumber(Me.specGrav_txt) = True And _
WorksheetFunction.IsNumber(Me.pAngle_box) = True And _
WorksheetFunction.IsNumber(Me.pLength_box) = True And _
WorksheetFunction.IsNumber(Me.pSize_box) = True And _
WorksheetFunction.IsNumber(Me.pQty_box) = True And _
pFullRnd_btn.Value = True Then
PrimFRcalc
Else
MsgBox "There is missing data." & vbNewLine & _
"Please check to make sure that all runer data has been entered" & vbNewLine & _
"and the Specific Gravity field contains a numeric value."
End If
End If
View 9 Replies
View Related
Mar 5, 2009
who can restrict the input values to numeric values only? I have 2 textboxes where the user enters employee id and numeric choice value of 1,2 and 3...I need help in making the textboxes restricted to numeric values input only. How Preventing the users from entering alpha and symbols values.
View 6 Replies
View Related
May 7, 2012
I have 3 sets of textboxes. The user inputs information and all the nformation for each are consolidated to one textbox(delaycomments.value)
2 of them are controlled by a calendar input. THe user chooses a date and the date is shown in a textbox. Then they enter notes in the the each comment (delay1, delay2, delay3)
The current code below works, however the spaces I used in between still show even if the values are empty.
So, the "-" that is used to separate the dates still shows even if there aren't any dates. And the ": " still shows as well.
If there is only information in delay1, this is what shows in the consolidated box(delaycomments.value)
5/7/2012-5/7/2012: test. -: -:
Is there a way to convert these to an if then statement to make sure the text only appears if there are values in the cells?
Code:
Private Sub Delay1Comment_Change()
Me.DelayComments.Value = (Me.Reason1Start.Value & "-" & Reason1End.Value & ": " & Me.Delay1Comment.Value & " " & Me.Reason2Start.Value & "-" & Reason2End.Value & ": " & Me.Delay2Comment & " " & Me.Reason3Start.Value & "-" & Reason3End.Value & ": " & Me.Delay3Comment & " " & Me.Reason4Start.Value & "-" & Reason4End.Value & ": " & End Sub
View 2 Replies
View Related
Jul 19, 2006
The following code works fine but I need some assistance on how to add values from a textbox per say. How would I go about adding the value of textbox1 to the code below. .HTMLBody = "<HTML><BODY>Job# –<br>Client Acronym –<br>CSR –<br>Kit(s) –<br><br>Comments –<br><br></BODY>" & Signature
View 8 Replies
View Related
Jan 1, 2007
i am trying to enter the EndX coordinates (The third number: 500) by entering a number in a forms textbox
ActiveSheet.Shapes.AddLine(0, 100, 500, 100).Select
how can i break the code up to enter the coordinates via textbox's
View 6 Replies
View Related
Mar 7, 2007
I have a userform created with 27 textboxes that corrispond to columns A through AA. What I am trying to do is when the form is loaded, I want to have all the textboxes populate with the information accross row 2. Using a scroll bar, I want the user to be able to scroll through the entries so that when the user scrolls down, all textboxes change to the information in row 3, 4, 5 etc.
Ultimatley, this is a data entry form, allowing the user to lookup and edit entries on the page. I can figure out how to do everything I need, witht he exception of the scrollbar.
View 6 Replies
View Related
Jun 22, 2007
having a different calculations performed within a Textbox on a Userform depending on the selection made in a Combo Box. This was answered here.
Perform Calculation In Textbox On Userform
I have another question regarding this problem, however the thread is closed so I have posted a new thread.
The original question was answered and the solution works very well,however I now need to be able to use the selection from two (2) comboboxes to initiate the various calculations in a similar vain.
have a look at the original thread to get an idea of what I am looking for here.
I have tried many configurations of various code, all of which works to an extent buts which falls over in certain circumstances.
View 6 Replies
View Related
