How do I select the next empty cell in a range?
Say I have myrange=Range("B32:B37"), then I want to put values into the next empty cell in that range.
I want to check if I have a value in B32, and if I have, I want excel to go to B33 and print a string there and the same for 34.
i need a code that will find the first empty cell in column "H" then select go down a row and select upto column "R" so in example range ("H2:R3") would get selected.
I am lost this is all i have so far and it doesn't work
Code:
Worksheets(newname).Range("H" & Rows.Count.End(xlUp).Offset(1) & ":" & "R" & Rows.Count.End(xlUp).Offset(2)).Select
I require code to identify the last row in column 'A' that contains data, and then to select every row up to that one, and each column up to 'H'. My data begins on row 3, and the rows with data varies from row 7 through 120. The columns with data is constant so there is no need to test in that direction.
View 2 Replies View RelatedI need to select all yellow tabs (color code 6) in a workbook with over 70 tabs and hide all empty rows within A1:I36 on each of these yellow tabs. the position of the tabs needs to be unchanged (sorting by tab color not allowed). I got this code from another excel forum but somehow it only works when i select one yellow tab and run it and the code only works on the one yellow tab i selected. can fix this code so that it can loop through all tabs (yellow and non color) and do what i mentioned above for each yellow tab?
Sub HideMT()
Dim Ws As Worksheet
Dim wsColor As Long
[Code].....
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
I would like to select rows of a range (eg A7:D11) but only those rows where the cell in column C is not empty
View 5 Replies View RelatedHow do I code in VBA - I need to select the next empty cell down in a column - ie blank field so that I can transfer the next set of data
create a code such that it will select a cell which is not empty and display the content in that cell. For example , in the attached file below i would expect output to be cells(2,5) = 12 and cells(4,5) = 13
View 2 Replies View RelatedI am using this code to select the first empty cell in column A.
View 9 Replies View Relatedhow i can go about finding the next empty row (and select the first cell of that row (column A))? edit: It probably should be noted that there are cells in Columns A through P. There are rows where all and/or just one cell contains data per row. So i cannot use a " lookup" based on a single column.
View 2 Replies View RelatedI am trying to paste data into a sheet immediately following the last weeks data. I went to use an offset function like :
Range("A2").End(xlDown).Select
ActiveCell.Offset(1, 0).Select
However, each weeks data is "Grouped" and therefore the .end(xldown) only takes me to the bottom of the visible rows, and the offset function selects one of the hidden cells.
i need a method to find the end value in a row (right side) and select the empty cell to its right to paste data in.
problem is the row where this data is may change so using
limit = (row, col).end(XlRight).Col
I want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies View RelatedI have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
I am trying to write code to select a range in a worksheet where the last cell in the range is variable.
Sub DataTest()
Dim LastColumn As Integer
Dim LastRow As Long
Dim LastCell As range
[Code].....
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
Code:
Sub TestBlankCell()
Range("D5").Select
Do
[Code].....
In cell D1 of sheet 2, I want the cell reference to be displayed of the next available cell in column A of sheet1
for example if cells A1:A238 in sheet1 are populated the cell D1 of sheet2 will display A239
I was wondering whether someone knows a formula that would be equivalent to WEEKNUM (excel 2003) since I will not be able to install the Analysis Toolpack because of IT validation issues?
View 4 Replies View RelatedI am writing the following code to set the source data for a column chart. the source should be F13 until last cell, which is F862
VB:
ActiveChart.SetSourceData Source:=Sheets("Input TE country").Range("F13:" & ActiveSheet.Range("F13").End(xlDown).Address), PlotBy:=xlColumns
Now it selects F13 until the last cell, which is F65536.
I have a spreadsheet. In this sheet the data is added daily so one column is increased everyday. The rows may also be increased. What I am trying to do is to sum the data in each row for a range of first cell in the row to the last non empty cell in that row and this has to be done for all the rows. So I thought the for loop would be useful for such requirement and I tried to write the following code. But unable to write the sum formula in the last empty cell in a row and I get the value error. The code is as follows.....
Sub sum_on_LastEmptyCell()
'find the last empty row in column A
lrow = ThisWorkbook.Sheets("sheet1").Cells(Rows.Count, 1).End(xlUp).Row + 1
'find the last empty column in a row
[Code] ........
Though one of my friend told that it can be done with "with and end with block but I am not aware of with and end with block.
It would be better if you tell me that how can I put the sum formula in my code. How can I use variables which return the row number and the column number in the sum range within the For loop because I want to put If Else condition for the calculations within the For loop i.e. if certain condition is true then I want this calculation to take place otherwise do something else. Moreover it will be easier for me to understand. Because I can use different formula based on different cells as well. Is there any way to do this?
I am not sure of the VBA code to delete enitre row if a cell is empty only within a range, then Ascend according to that Row's Values and show the
Rank No's only on what Rows that remain.
The end result example is in Sheet2
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
I'm looking for a quick and easy way to insert a value in the first empty cell in a multi-column, multi-row range using VBA. I suppose I could loop through the range, but the table could grow to immense proportions and I don't want to slow everything down.
For example, the new value should be placed in cell C4. It doesn't matter whether the range is looped through the rows or columns, either will work just fine.
A
B
C
1
5
65
56
2
32
12
89
[code]...
I am looking for a formula function or a vba code where:
- In workbook1 find the first cell that is empty between range A7 -
A10,
- In workbook2, in Range G10- G13: find the word "Day1".
- If the word "Day1" exists in cells G10 or G11 or G12 or G13, copy
the particular cell or cells where "Day1" exists to the first found
empty cell or cells in range A7-A10 in workbook1.
Lets suppose cells A8, A9, A10(workbook1) are empty cells, that means
A8 is the first empty cell.
And G10,G11,G12, G13 (workbook2) have the word "Day1"
Then,
Copy cell G10 into cell A8
Copy cell G11 into cell A9
Copy cell G12 into cell A10
How do I select all the NON EMPTY CELLS in a column?
and
How do I select all the NON EMPTY CELLS in a range?
What would be some code to select the 1st empty row in a sheet. I need to select entire row. To be easy it could be first empty cell in A, but would like whole row selected.
View 3 Replies View RelatedThe code below is part of a larger script which I'm having difficulties in amending.
[Code]....
In it's current form, this row.
selects cell C7 and expands the range until the cell is blank.
I'd now like to amend this so that I can select the first cell in the range within an offset rather than C7
I can set the offset within the script as below, but I'm a little unsure how to select the first cell in the range.
I need a code to select the last cell which is having value in the range of A1:a200. if I use below, it is selecting cell beyond a200.
lr = Sheets(1).Range("A" & Rows.Count).End(xlUp).Row
how to select a cell in opposite (i.e right side of a range) while using a macro. My macro selects a certain range based on user input. The active cell is the left most upper cell. I need to move the active cell within the range to the right upper most cell. I tried the short cut key - tab, while recording a macro, but the macro just selcted a that certain cell.
View 4 Replies View RelatedI have files where empty textboxes have been copied over tens if not hundreds of times, thereby slowing down the scrolling speed immensely.
I would be interested if there was a macro to
a) select all empty text boxes
b) select and delete all empty text boxes