How Can I Make The Cumlative Total Stay And Be Updated With Each New Entry
Aug 18, 2009
I have two columns D and E, the header takes up rows 1-4 so the first available row is row 5. The D column is going to have numbers added daily, the E column will show the cumlative total. How can I make the cumlative total stay and be updated with each new entry in column D?
C D E
Name daily cumlative
dave 20 20 Row #5
Jim 30 30
Tim 11 11
Sara 6 6
Say these are the entries for day one, I need to be able to make new entries in the same D column on the next day and have it update the running total in E?? I cant figure the darn thing out.
I have a list or log that is updated by a number of people on a sharepoint file. The list consists essentially of 2 columns - lets call them Location and Date.
The Locations are populated from a pulldown list but can be repeated a number of times throughout the list. I have the list set up using Table Formatting so the range updates dynamically
I have text boxes for additional information. Is it possible to make text boxes to stay in place so that if I or someone else deletes a column the text boxes would not shrink and move to the left?
I have approx 500 workbooks which contain custoemr details and I need to extract certain info (postcode, name, contact, phone number etc) and place it all on 1 spreadsheet. I was originally going to source data from unopen workbooks, but have realized I only need to do this task once, and I can maintain it from then on...
I have created a spreadsheet (attached) which uses INDIRECT formulas to retrieve the data. When I type in the file name in column A, Columns B to K fill themselves in. What I want to know is:
Once I open say, 10 Workbooks, TYPE the name in manually and all the other cells have filled themselves, I want to somehow KEEP the data there, rather than it return a #REF error when I close the workbooks to open the next batch.
Also, if you look at my workbook, to the far right is a range of data which I use in my INDIRECT formulas. Once I have filled all the cells with the relevant data, I want to be able to Filter my spreadsheet by Date Ascending. BUT I cant seem to do it because it includes my INDIRECT range in the filter and mess's up the formulas then I have tried Locking & protecting workbook, with Autofilter & select cells etc TICKED for users to use, but it still tells me to unlock workbook when I try to filter.
I have a spreadsheet on sheet 1 with a list of customers and their information. So on column A I have the customer number (i.e. k968, e37, p528,...), on column B i have the customer's name, on column C the street's name, on Column D the house number, on column E the zip code and finally the city on column F.
Right now there are around 600 customers in this list.
I have made a userform with a combobox in which I want to select an existing customer (pulled from the spreadsheet). On the same userform I have textboxes (customer number, name, street, number, zip, city). When I select a customer in the combobox, I want this customer's info to show up in the textboxes. I want to be able to change the info and hit Next to store the changes in the spreadsheet. When I do not select a customer from the combobox, I want to add new info in the textboxes and hit Next to store this info as a new customer. The userform also has a delete button. Then I select a customer in the combobox, this customer (and it's info) should be deleted from the spreadsheet when i hit Delete. So the spreadsheet is variable in length.
getting data externally from web and also keeping the previous data prior to the refresh.
My external table/data has 10 rows reporting values per day (10 days data table).
I can link the table to my sheet, however what I can not do is to create an offlinek, year to date table in the sheet which captures the rolling 10 days (everytime it is refreshed) without losing the prior days.
Above table changes on a daily basis, only reporting the last ten days.
How can I capture this data on a rolling basis, i.e. in a year to date format, so that everytime I refresh, the internal table gets updated with the new data.
I would like to be able to enter a number in a single column, and then Excel adds this number to a total column each time it is updated.
This is for entering via a PDA, so I need a simple entry method, ie to enter a figure, and then keep a running total every time a new figure is entered. This would only use the one column and overwrite the number each time, rather than adding up individual columns.
The attachment shows the items listed in column A, column C3 - C10 would be where I would like the number of items entered, and as I go round, I would just update the last figure. I would like the figures from C3 - C10 to be added to the Total column D3 - D10 for each item.
How do I setup one "master cell" to be used as the permanent entry point for dollar values of all entries performed as needed....and have that value be automatically added to the cell of the month reflecting the day the data was entered?
I am looking to keep track of purchases on a monthly basis. (e.g. I have 35 receipts for today...I just want to grab one at a time, enter the total for each receipt in one cell and have it add the value to which ever month's value based on the day I enter it.
I do a lot of work in excel to do with accounts and this often needs checking against sage. When the invoices/petty cash sheets are put into sage the total amount is put in, but in my spreadsheets I need to split the reciepts. So I was wondering if there was a formula/VBA code, that if I only knew the total of the invoice would find which cells added up to this total?
It doesn't encompass the full spectrum of what I am hoping to have on this timesheet.
For some reason - when I select "REB (0730-1600)", it comes up to 9 hours and not 8.5 hours.
And I cannot have a =SUM column. My goal was to select a shift (Cell 5), it automatically input the hours worked (Cell 7), and then somewhere formulate a total for the week.
I am working on a spreadsheet to track hours worked. It is an 8 hr day. I want there to be a running total, but when less than 8 hrs are worked and the total goes below 8 hrs per day (as in when you have no "banked time" it will not display negative or owned time. Also, it doesn't seem to want to skip over the weekends for me.
I receive a large file every month with 30K+ rows of data that need to be manipulated manually before I can send it off. Within the data are "chunks" of data that are anywhere from 1 to 90 rows each. Each chunk needs to total 100 or less, and while they do for the most part, some end up over 100 due to rounding (usually 100.02 or so). The rows above and below each chunk are blank, and I currently have a calc to add each chunk, and flag it if it's over 100. Then, I have to go through each of the flagged chunks and manually decrease one of the lines to make the total 100.
Is there any way to automate any or all of this procedure?
I have attached a sample file with two chunks of data. The actual files contains 14 more columns to the left that aren't shown.
I have a list of numbers and want to see if the sum of any of them exactly makes up a specific larger number. Any quick way to do in excel? Eg do any of the below together make the exact total of the number at the bottom.
I have Excel 2008 for Mac (vers 12.0). On a basic spreadsheet, the first column is for date which I have formatted so I can type in 15/8/9 and it appears as 15-Aug-09.
However, each time I open Excel after having Quit it, I have to reformat the cells in this column again as they revert to converting my date input with something like 39,123.
My other columns are formatted to currency and are always okay.
1. I have a userform I created that has a text box that pulls it's data from one of the spreadsheets tab. The userform also has 5 buttons I shall call Tab1, Tab2, Tab3, Done, Cancel. 2. The first thing a user will do is make a selection from the text box. 3. The User will then select one of the "Tab" buttons.
Below is my code. What happens is that no matter what button I click (Tab1, Tab2, Tab3) it ends up on Tab3 because it is the last transfersheet line of the done_click() sub routine. How do I get it to stay on the Tab I select?
+++++ Private Sub cancel_Click() Unload UserForm End Sub +++++
Private Sub done_Click() Dim transferworksheet As Worksheet Set transferworksheet = Worksheets("Tab1") transferworksheet.Cells(5, 7).Value = Me.ListBox1.Value
I have a spreadsheet that tracks employee stats. Most of these stats are amounts of TIME. These times are being pasted from another source and the problem I'm having is that as soon as excel sees "1:02:03" it puts it in TIME format. The problem I have with that is later on I need it in text format because a lot of the other times are in text already. (the program the info is coming from will use ":59:59" and not have a 0, so I have compensated for that later) So how can I paste 1:01:01 and not have it saved as TIME? I cant CONVERT it to text, I need it to be text from the start.
In Spreadsheet A Cell H8 is entered as Item Description.
In Spreadsheet B Cell H8 is also entered as Item Description, but if the Item Description in Spreadsheet A has been changed, I need Spreadsheet B to reflect that change, if not it should stay as Item Description.
Every time I copy and paste cells in a specific workbook it changes the reference style to R1C1. Setting it back in the options, saving the document, closing Excel then reopening brings it back as A1 referencing but copy and paste will again return it to R1C1.
I've checked for VB code and there's nothing there either.
While using Excel 2003, I am aware of "freeze plane" and "split worksheet". The freeze plane comes in handy if I want to the first few rows to remain stationary and displayed while I can scroll down to the rows below. Similarly, the split worksheet comes in useful if I want to have the first few columns remain in place while I can maneuver to the right to see the other columns.
*** THE QUESTION IS: how can I get cells A1 to F20 to remain displayed and unmoved even if I choose to move the active cell around anywhere between G1 to K9999
