I'd like to reference Column A to a single cell in a different sheet.
=StoresServiced!A2
Returns the value of A2 in the sheet called StoresServiced to another sheet.
What I want to do is, the values from A2 to A102 to show in one cell, separated by commas. So if theres value in A2 (8009) and A3 (8010), I want the active cell (ex. M43) to look like this -> 8009,8010 -- so on and so fort
I'd like to check if a user supplied string is single cell reference. My problem is that the below code comes back as vallid if I enter a range like B2:B4.
Sub test2()
Dim UserAdd As String
UserAdd = InputBox("Enter your address")
'check if valid:
If ValidAddress(UserAdd) Then
MsgBox ("it's valid!")
Else
MsgBox ("it ain't valid!")
End If
End Sub
I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...
View 9 Replies View RelatedLet's say I've ended up with the number 8 in Cell D4 for example. Is there a formula that can return the letter "G" (The 8th Column) so I can use it in future cell references ? If so, let's say we store that in Cell B5. How do I now refer to a cell in a chosen Row of that same Column by reference to Cell B5 ? For example if I want to refer to Cell G33 can you refer to this Cell in some form like Cell(Contents of Cell B5;33) ??? Don't want to use R1C1 type references if possible.
View 9 Replies View RelatedI have a column of numbers that I need to reformat. I created a macro to copy/paste special/transpose to get the data into separate columns. I then used & to get them into one cell. I can only have five sets of # in each cell. The macro works but it replaces the previous set of accounts. Is this the best way to reformat these numbers? If so, how do I correct the macro so that it doesn't replace the data i already reformatted?
I have attached a sample spreadsheet.
I have a worksheet that I use to store several static lists which populate various combo boxes in my application. However, I'd also like to use this worksheet to store a single column of data which can shrink or grow dynamically.
I have no problem with finding the last cell and adding data to that cell, but I'm having trouble with how to go about deleting the value of a single cell.
So as an example, If I've populated Cells A1:A10, and I want to delete the value that's in A6, how do I go about moving cells A7:A10 up one to fill in any empty spaces?
I have a column of data that will vary in length and I'm trying to write a macro to combine it all into one cell. Basically I need to do the equivalent of entering "=A1&A2&A3..." for the entire column. I started by creating an array string variable and have the data in grp() but now I'm stuck trying to figure out some sort of loop to keep adding onto the same cell or something
View 6 Replies View RelatedI am trying to do is put an asterisk at the beginning and the end of the Information in a cell for the entire column. Is there a way to make a macro that, once I highlight a column, it will put an asterisk at the beginning and end of the information in each cell in that column until a blank cell is reached where the macro will then stop? This will save me a lot of work. It will work for me if a particular column has to be defined in the macro, but would be better if it is one I can just highlight.
This would also work fine for me if I just had to highlight the cells that I want to use as well. Sorry if this seems to be a stupid question, but I am a very novice excel user
Question is this, "can a single cell in a column be divided into two parts?"
View 14 Replies View RelatedHow can I identify the last cell of a single column range . . . i.e. the last cell address of range C1..C15 is C15. The range will have a name of "reg".
View 9 Replies View RelatedI'm trying to separate a cell containing:
TSB w/6.5% NaCl - NS 29002TSB w/6.5% NaCl - NS 29003TSB w/6.5% NaCl - NS 29004
into a 2x3 table, in another sheet, like this:
TSB w/ 6.5% NaCl NS 29002
TSB w/ 6.5% NaCl NS 29003
TSB w/ 6.5% NaCl NS 29004
TSB..... in left column and NS...... in right column. This example includes 3 items as shown above but the single cell could contain more or less than 3 items
I want to add a Punctation mark (comma), like this: ,
and also want to add punctation mark (colon), like this: :
In this moment I have below macro:
Public Sub CombineCells
Dim Combined As String
Combined = ""
For Each Cell In Selection
Combined = Combined & Cell.Value & ":"
Next Cell
Selection.Cells(1, 4).Value = Combined
End Sub
the effect shoud be like this:
before:
--A
1-C
2-D
3-E
4-F
Etc.
after transposed:
--D
1-C:D,E:F Etc.
I have a data entry spreadsheet that contains 120 data entry panels each of 10 rows. Each panel is separated by 3 rows (1 of which is hidden). When entering data to the panel the user is required to enter a date in column F of the data entry panel. The number of used rows in each data entry panel can vary from 1 to 10.
The entry of a date in the first Column F cell in each entry panel stamps today's date in Col F in the first row below each data panel (the hidden row) and that date is then linked to a separate summary sheet to show the date of data entry. The code I'm using for the date stamping routine is below, and although it works it is painfully slow and I'm sure very inefficient. I've had to break the code into the three sections as shown below because there seems to be a limit to the number of individual cells I can reference in each of the range statements. (Is there a limit or is the length of the range statement causing some other problem?)
I'm using Excel 2010 and I'm having troubles displaying hiding my column B if none of the cells of column A contains either "(Quasi Echec)" or "(Quasi Russite)" at least once.
PHP Code: [URL] ......
Below are my 3 attempts.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim c As Range
If Target.Column 1 Then Exit Sub
Application.EnableEvents = False
On Error Resume Next
[Code] ..........
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Sub GetUniquesInColA()
Dim rng As Range
Dim c
If Target.Column 1 Then Exit Sub
On Error Resume Next
[Code] .........
Code:
Option ExplicitPrivate Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim x As Long
Dim LastRow As Long
LastRow = Range("A65536").End(xlUp).Row
[Code] ...........
I am trying to read a value in cell A1 and make say cell B1 read the same. The data in cell A1 is a real time percentage value that gets updated every lets say 10 secs. Every time the data is updated the new value goes into the next cell A2, A3, A4..... and so on. Every time it gets updated (i.e into A1,A2,A3,A4.....and so on), I want to read the new value each time in B1.
View 9 Replies View RelatedHow to copy an entire column having numbers and words on every single cell into another column but only copying numbers, not words.
View 9 Replies View RelatedIs there a way to specify the filename for an external workbook that can be referenced throughout the spreadsheet? In my case it would be better if I could change the single reference instead of having to change it throughout the entire spreadsheet everytime I needed to use data from a different file.
View 2 Replies View RelatedNew task for work today, which involves creating a spreadsheet for all existing members of an organization. I went to the organization's website and copied all of the names & info, then pasted into a blank spreadsheet. All of the entries were separated into their own rows, but all of the information is only in one column. Take a look at my sample:
(NOTE: does not contain actual names or info) Book1.xlsx
This sample only contains 5 entries, but my actual list contains about 200; if it had just been the 5, I would have been fine with manually separating the information, but for 200 entries I need something much faster. You'll notice in the sample that the company, person, address, phone number, email, and website (when there) are not separated by anything. I know that using Text-to-Columns, I would technically be able to achieve what I need using the Delimited option, but I can't imagine this working without separators. I thought perhaps there might be a way to separate them based off font changes or something? Or maybe some way that I can insert a semi-colon or some kind of separator between the necessary data?
While the font is Arial for the majority of the entries, in terms of font changes: company font size is 12 and color is navy blue; the person's name is size 18, bolded, and dark grey; the address & phone number are size 9 and the color is light gray; and finally, the email & website are also size 9, but navy blue in color. However, you'll notice that two of the five entries are formatted differently. This is because formerly, the entire cell & its text were a hyperlink to the email. I went ahead and removed these hyperlinks, simply using a "Remove Hyperlink" macro walk through I found on the web, but now these cells are uniformly set to Calibri and size 11, my default font setting.
Is there any method to speed up a for each loop to count text in a cell with multiple criterias in a single column. This is on example:
Code:
For each rr in r
If rr = "a" And rr.Font.Strikethrough = False Or rr = "B" _
And rr.Font.Strikethrough = False Then
a = a + 1
end if
next
I need a macro that will examine column A starting at A2 and working its way down copying the data in the first cell (A2) and then delete that row. If the next cells are empty (usually the next 5 cells) it should paste this copied value in each of the empty cells until it comes to the next cell with data in it. At this point it should copy this next value and delete the subsequent row and copy this value in each of the empty cells directly following (again, usually 5) until it finds the next cell that has data in it. At this point, again the whole process begins again repeating it self until it comes to the end where no more data is.
Here is an example of what I need done:
This sheet:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] ...
Should look like this:
Sheet1
*
A
B
C
D
1
Item Number
Type
Type 2
Feature
[Code] .....
I have a spreadsheet in excel with scheduling information, each group of data (job) is made up over 2 columns and 6 rows and is in a block (this is so it is easy to view and manouvre)
I have a link in another worksheet that extracts information from the cell if a criteria in the group is met!
At the end of each day I need to delete the columns (B and C, which make up that day) in the schedule.
When I do this all the references in the other worksheet are messed up, even though the next day is moved to columns B and C.
I would like the link to the other worksheet to automaticaly recognise the new values in column B and C as the reference.
I am not sure how this is possible without doing copy pate transpose or individually refereing each cell to source. I would like the heading to be presented as in sheet1 which is sourced from Source sheet but if anychanges are made to source it updates the Sheet1. I have attached an example to illustrate. (Headers are not fixed number)
View 3 Replies View RelatedI am trying to get information from 1 sheet to another. What i need to do is take the information from sheet 2 column H2:H26 and put it in sheet 1 cell I4. i already have the vlookup information in the other cells that i need but for what i need this for is different than a vlookup. basically i want to be able to type in a name (from sheet 2) in cell I4 (sheet1) and all the information that i need auto populates for me like i already have. I was able to do this with a drop down menu but that wont work as the information will change weekly,
View 11 Replies View RelatedI have 2 Sheets in Excel: Sheet 1 & Sheet 2
Sheet 1 has some basic data (numbers) in a column, say AB1, AB2, AB4, AB15 (specific cells)
Sheet 2 basically references the data in a nicer template, with the basic forumala: ="Sheet 1"!AB1, etc..
Now...Sheet 1 has a new column inserted and new data added weekly, so AC1, AC2, AC4. AC15
How do I ensure that Sheet 2 recognises the new Column Insert (incremental letter) and references it automatically?
I have a column of numbers, on which i would like to perform subtraction, in a way that the cell in the (i)th row will be subtracted from the one in the (i+x)th row, while x is a parameter that the user can change as he wishes.
My problem is how to refer to the cell address and still use this conditional reference...
If anyone has an idea how to realize this calculation (which should be peanuts in Matlab, but apparently more problematic in Excel),
I have a massive excel sheet with 300,000 rows and 100+ columns. When reading back through my formulas, it can get very confusing. Example: "=(AZ9*5 + 1)+BH9/2 +(AP9*0.75)" I then have to figure out what each column letter is representing. Instead of this, could I rename a column so I can reference the variable name? Example:
Instead of =CONCATENATE(A4, " ", B4)
have
=CONCATENATE(FirstName4, " ", LastName4)
I am using this formula
=IF($A5="Select","",MAX(INDIRECT(SUBSTITUTE($A5,"/","")&"m1440"&"!d:d")))
It looks for the sheet based on A5
It finds the max number from the sheet in Column D
This is what i would like to do please....
On this found sheet - Column A has dates in this format yyyy.mm.dd
I would like to enter a date in a cell (say for example AA5 on main sheet)
Can the formula above be adapted to:
Look for sheet based on A5
then
Look at date entered in AA5
then
use Vllookup to find row containing date in AA5 (making table range the ENTIRE SHEET found based on A5)
then
Return value from Column D
I have got this working so far:
=LOOKUP(D9,'Financial Snapshot'!$H$5:$I$95)
D9 = 1.01
D10 = 1.02 etc
[Code]....
I'm trying to reference a location on a spreadsheet in a macro by using the values in two cells (the idea is to then paste to this location):
D2 is 17 (the row)
B4 is 2 (the column)
therefore the location is B17 (R17C2), but can I get this to work...? The values in these cells can change depending on selections made which is why I want to use the cell references rather than the absolute!
How can I do the following....if for example I have the following vlookup;
Code:
=vlookup(A12, 'sheet 2 $A$2:$ID50$, 3, false
How can I change the column index i.e. the 3, to reference to a cell.
Code:
=vlookup(A12, 'sheet 2 $A$2:$ID50$, H1, false
The above example doesn't work but I'm sure something can be done using TEXT or VALUE