I'd like to check if a user supplied string is single cell reference. My problem is that the below code comes back as vallid if I enter a range like B2:B4.
Sub test2()
Dim UserAdd As String
UserAdd = InputBox("Enter your address")
'check if valid:
If ValidAddress(UserAdd) Then
MsgBox ("it's valid!")
Else
MsgBox ("it ain't valid!")
End If
End Sub
When I use the following code, the spell check still checks the entire sheet. How do I have the spell checker on check a specific cell/range of cells?
Sub spellchecker()
Range("B7").CheckSpelling
End Sub
I have problem with function, I have array with random numbers in cell G1 and columns with X in some of the cells, now I want to check the cells with numbers from cell G1 in column F to see is there X or not if yes count if not do nothing. In attached example result should be 3.
View 7 Replies View RelatedHow a single-cell formula to check that 2 transpose arrays are equal.
For example, A1:A5 are {1,2,3,4,5}
AND
B3:B8 are {1,2,3,4,5}
Is there an array formula in C3 for example, that will check (i.e. say TRUE) if corresponding ranges are true i.e. check in this cell that A1=B3, A2=B4,...A5=B8.
I'd like to reference Column A to a single cell in a different sheet.
=StoresServiced!A2
Returns the value of A2 in the sheet called StoresServiced to another sheet.
What I want to do is, the values from A2 to A102 to show in one cell, separated by commas. So if theres value in A2 (8009) and A3 (8010), I want the active cell (ex. M43) to look like this -> 8009,8010 -- so on and so fort
I am trying to write a simple code for some project management/scheduling spreadsheet in my office. We have projects with multiple people working at one time.
I store all names in an array and compare those values to the cells containing the various names. It works when only one person is named, i.e. only [CR], but with multiple people, it doesn't read the data, i.e. [CR, NS, MR], that is separated by commas.
Is there a command to recognize the first two characters and compare them to something, then characters, 5&6, and 9&10, so forth....?
I tried to use the with characters command that help says will take the "3rd character space and make the font bold" but it doesn't recognize my inequality.
My question is about checking to see if a cell contains a particular word.
I know that the following checks to see if a cell's value IS a particular word:
I have a string of text in cell A2. In cell B2 of my spreadsheet is a formula that calculates a number based on the text string in cell A2.
I want to write a VBA loop that removes a single character from the cell A2 string, then calculate the new value in cell B2. I want this loop to continue until the value in B2 falls below a set value (in this case 60).
My code so far
Sub trim_text()
Dim mytext As String
Dim myanswer As Integer
mytext = Range("A2")
myanswer = Range("B2")
Do While myanswer > 60
mytext = (Right(mytext, Len(mytext) - 1))
Loop
End Sub
This obviously does not work. In my excel table I have a formula in cell B2 to calculate "myanswer" will this work, or does that code have to be placed into the VBA code?
I have a google earth KML file that I have converted to text, and through a bunch of manipulation have been able to pull a series of GPS coordinate strings into a single cell string. Unfortunately, the string data is beyond what excel 2007 can handle for a single cell. so my thought is to have excel pull each coordinate string into a separate cell with which i can then run a macro to develop a new KML dynamically. (changing multiple attributes based on a query to a database)
Each string of coords actually maps out a single region (path) on the KML, truth be told it is telecom rate center data, and each rate center will have numerous other variables applied to it depending on my company's voice network capability for a given rate center. Currently my only desire is to depict differently any rate centers that I'm able to deliver VOIP services to by showing them in a different color...but these change very often so it will support to be able to auto generate the map from time to time.
the raw data from the KML looks like this:
Code:
CLINTONVL
RATE_CNTRCLINTONVL
STATEPA]]>
ff000000
1
0
1
[Code] ..........
After doing my data import, i extracted via various manipulations, the rate center name (a common lookup value that stays constant across multiple databases), and the string of coordinates. this is where i run into trouble. i need to pull each coord into a separate cell assuming i won't run out of cells in the x coordinates to gather this data OR find a way to grab the data via another lookup to another document...not desireable.
I want my output to look like:
Code:
RC_NAMECOORDSLATAVoip?
ALIQUIPPA
80.334114,40.520974,0-80.327493,40.520023,0-80.323915,40.51957,0-80.31997800000001,
40.519933,0-80.316958,40.521221,0-80.314431,40.521445,0-80.314262,40.521332,0-80.31398,
40.521194,0-80.31315600000001,40.520832,0-80.313057,40.520794,0-80.312805,40.520641,
[Code] ........
First off, my import was jacked up by missing some comma's...this i can fix easily with the string importation and manipulation HOWEVER...i still run into the issue of string length OFTEN.
I've posted this query before, not on this forum, but I don't think the replies I've had so far are going to do what I want. Initially I was looking for a formula, but the suggested pile of nested IFs won't work for the number of conditions. I saw a previous post on here for a VBA macro to search for a text value in a cell against the cell contents of a range and it seemed to do at least the first part of what I wanted. I attempted to manipulate it a little to test its applicability for my own nefarious purposes but for the life of me I can't get it working.
This is complicated by the fact that the actual data is commercially confidential, so I can't show you the actual file, but I can fake what I want with two simpler ones. I've attached them to this post. What I want is a fair bit more complex than the other post I found - I want to be able to compare a partial text string from a given cell in a range ('Check Value' in the attached TestBook2 ) against the strings in a range of cells ('Value 1' in TestBook1), and return the corresponding value from 'Test Value' to the corresponding adjacent cell to the tested 'Check Value', with an order of precedence, for example...
Testbook2 contains an entry in C5 of 'a, e, h, z, x, y'. Testbook1 shows that the return for a, b, c, or d is 'moo', for e, f, or g is 'steve' and for g through q is 'fred', all others being no returned value. Moo>steve>fred, so I want the corresponding 'moo, steve. fred or <blank>' cell to contain 'moo'. Conversely, C6 contains 't, u, z' and therefore shouldn't have a value in 'moo, steve, fred or <blank>'. C12 contains 'f, z, s, y, u' and C15 'i, x, z, s', and therefore should display 'steve' and 'fred' respectively.
I'm trying to switch my vlookups to something more dynamic. I keep adding columns to the data sheet (sheet1 for these purposes) and so I have to go back and update all of the other sheets that use the vlookup. (I'll just give an example as sheet2 for these purposes)
So what I have currently:
=VLOOKUP(A5,Data_All,4,FALSE)
Basically the 'A' column in sheet2 has an integer value, and so the vlookup takes that integer and looks up on sheet1 which row corresponds to that integer and then returns that string value.
What I want:
='AO_Cat_' & 'A5'
Basically I have named every cell in sheet1 and the particular value that I want to pull is named "AO_Cat_%name" with the last part being the integer value. I don't know if that make sense or not. For example, on sheet2, A5 might be '16' and so the value that I want to pull is "AO_Cat_16"
If I were to do this from the VBA side of things, then it'd be a simple range("AO_Cat_" & id_number) where id_number was the lookup value. However, I'd prefer to have this directly as a worksheet formula for simplicity purposes.
I need to have a link to data in another file. The file will be in the same directory, however, the name of the file I need to link increments daily. I have a string being generated already with the name of the file I want to link to. I can easily add a cell reference to that string, but how do I use that string value in a link? Or - how do I use quick'n'easy VBA to snatch the required cell's data?
e.g.
Required data is in the file "production 060723.xls", in sheet "Daily Production", in cell "E2". Current file has a string being generated in a cell:
"\server1production dataproduction060723.xls"
The following day, the required data will be in a file called "production 060724.xls", same sheet, same cell. The current file's string data will also update to reflect the needed file. I know that similar questions have been asked here - but none that I saw in my search seemed quite what I need. Even if someone can direct me to the right thread, that would be great.
i have a device that produce its data as following:
NTFLog_D2013-02-12_T104016.csv
I need to divide the single column to 7 column as separated by semicolon ";"
I have something like the following:
If Worksheets("RawData"). Cells(1, nColumn).Value = Worksheets("RawData").Cells(12, 16).Value Then
..do code (I know the cell location of interest at this point)
End If
Then I End up needing To Do something Like the following
ActiveChart.SeriesCollection(1).XValues = _
Worksheets("RawData").Range("L1:N1")
“L1:N1” above is a sample. Given the code above it I have the cell location in question but it is in the format such as .Cells(12,16). That doesn’t do me much good when range wants something like “L1”. I don’t know how to convert that (12,16) to a L16 for example.
I have a sheet in which some of the cells have two strings separated by a linefeed. I have come up with a cumbersome formula which will let me check if either of the two strings is a member of a list stored on another sheet. However, it fails if there is only one string in the cell, presumably as there is no linefeed for the formula to find. How can I modify the formula to cope with this situation?
There are also on occasions, three strings in the cell, but I can't seem to access the middle string with the formula. Simplified spreadsheet attached to show the problem. This must be formula-based, as we have a no VBA policy. If you think there is better way of doing this, please let me know.
Is there any way to check a worksheet/workbook to ensure that all formulas contain absolute references?
View 9 Replies View RelatedI have a sheet that I need to combine data from three cells into one and then get rid of original data.
Data to be combined:
A1=650
B1=1234567
C1=1998
D1=Desired Output
Desired Output:
A1=
B1=
C1=
D1=650-1234567-1XXX
Is there a way to specify the filename for an external workbook that can be referenced throughout the spreadsheet? In my case it would be better if I could change the single reference instead of having to change it throughout the entire spreadsheet everytime I needed to use data from a different file.
View 2 Replies View RelatedI'd like to write a formula that check if a string (contained in another cell - say A1) includes at least one occurrence of one of a set of 5 sub strings. If the substring is included then it should return which one.
For istance, say that the cell A1 = " The colour is BLACK" then I'd like a formula in cell B1 that check if any of the following strings is included in A1 (RED, GREEN, BLUE, BLACK, ORANGE) and that tells me which one.
How to do this with a one cell formula ?
how I check the last 4 letters of a String to make sure they say '.xls', '.csv', etc, etc, for varification purposes.
View 4 Replies View RelatedIs there way in Excel VBA to check if a string contains a number, and then return TRUE or FALSE. Numbers can been anywhere in the string. See example below.
View 6 Replies View RelatedI'm working on a project where I need to prevent the user from entering non-digit string inputs. I've tried the using IsNumeric(MyString). but that doesn't prevent , + - signs to be entered. I also had to conditionally enable the input of a string with leading zeros like "01" so what I've ended up with is a rather messy looking' sub that handles this (don't know if forum rules allows me to show it here?). The problem is that I'm not a 100% sure that my sub fit to handle all eventualities so therefore my question is whether there is an easier, fool proof way to check my strings?
View 6 Replies View RelatedI am trying to write a function that will give me the amount of time a certain number shows up in the same digit place in a large set of numbers.
For example:
111112221233313
111212222233323
111312223233333
111412224233343
111512225233353
111612226233363
111712227233373
111812228233383
111912229233393
given the number set how many times does the number 5 show up in the 4th digit. I know its 3 but for the data size I need to run it on, it is impossible to count.
What function would count how many times a certain number shows up in the same spot?
There is a method to use ROW(1:10) within an array formula to strip a string into individual elements e.g.
HELLO > {"H","E","L","L","O"}
I cannot find it anywhere, thought it was something like =MID(A1,ROW(1:10),1) but not yielding results.
I want to check if cells C1, D1 and E1 contain the same name. For example if the cells all contain the 'Joe Bloggs' (or whatever the name variable happens to be) then cell F1 should say "Yes", else "No".
View 1 Replies View RelatedI have a test to see if a text string is in an array that mostly works, but sometimes fails and I don't understand why.
The routine calls a Function IsInArray which returns a True/False value depending on whether the search term is in the array.
Code:
Sub TestFilterArray()
MyArray = Array("a", "b", "c")
If IsInArray("a", MyArray) = False Then
[Code]....
In this case the first item in my array is "a - b" (note that this is a text string ), but for some reason because my test value is "a" the routine things it must be in the array.
Thus I am thinking that the ampersand and dash symbols are somehow confusing my routine.
How can I change my routine so that it correctly identifies which text strings are in my array?
I have some code where I need to check if the first five char are numbers and not letters.
I have in a column for example
12345-someone is here
23456-someone else is here
someone is here too
I need to get all of the ones that have 5 digits and not pull in the other into a new list.
I have tried Left(CPHierAll. Cells(CPHierAllRow, 1),5) which will get me the fist 5 char. and then i need to check to make sure that they are all numbers and not char.
if Left(CPHierAll.Cells(CPHierAllRow, 1),5) = "#####" then
But this does not bring anything in.
I also tried if CPHierAll.Cells(CPHierAllRow, 1),5) = "#####" then
I have 3 column that i am checking for different thinks the first two work just find and seperate out on the check but the last one with the numbers is being a pain.
I recieve a spreadsheet each month with the following column of data:
9 Paddington House
PO Box 73
Whiteleys of Bayswater
9-10 Grove Road
134/138 Drymen Road
44-46 The High Street
1 Midland Road
48 Donegall Place
As you can see, it consists of addresses, each line is a separate address. I need it to be converted so that the data is split into the following 5 fields:
Street number from
street number letter from
street number to
street number letter to
street
If there is no street number , then it should just enter the data into the street field. If there is a range such as 44-46, it should enter the 2 numbers into the from and to fields. Sometimes this is in the format 44/46. Also, sometimes there are letters, eg 44a-44b, in which case each section (ie 44, a, 44, b) needs to be in a spearate field.
The problem - I'm trying to find a formula that will find text between 2 characters with unlimited instances in a single string and combine the found text to a single string. The character enclosing the text i'm after will likely be a % symbol. This formula would then be replicated down 5000-10000 rows.
eg. 1 - This is %an% example %sentence% to show what I %am% looking for
eg. 2 - This %is another% example of what I %need%
eg. 1 answer - ansentenceam
eg. 2 answer - is anotherneed
Ideally this would not use a macro as it will be applied to an ever expanding data set but I realize that may not be possible.
anyone know how to refer to text in a string? vba
View 9 Replies View Related
