This is what I am writing
Sub Macro5()
....
End Sub
It is not doing what I want it to which is to find data in a certain spot on 1 sheet and copy to my database sheet and repeat until it finds the first blank cell. I have gotten much help on this to help me understand the functionallity but I don't understand vba enough to build the macro myself.
I have is a list of data with headers
mold # casting date manufacturer condition
and have about 150 entries for each column.
What i want to do is to store data to the next available row in that list by entering "w x y z" in columns A1 B1 C1 D1.
Then when i have new data ww xx yy zz, i again want to enter it in columns A1 B1 C1 D1 and automatically have it stored beneath my last entry at the bottom of the original list.
I have a spreadsheet with a summary tab, a tab named AAA and a tab named ZZZ. The data tabs are found between tabs AAA and ZZZ
On the summary tab, there are rows that pull total info from the tabs between AAA and ZZZ.
The problem is, if I add a new tab between AAA and ZZZ, I have to remember to add a new row on the Summary tab for this new tab.
how I can flag it if a new tab is added, but no corresponding new row on the summary tab? I'm not sure whether I want it to flag it, add it automatically or what..............?
I am having a table like this
col1
col2
col3
Col4
[Code].....
I need to test each cell for text and to copy that text into another place (lets say sheet 2). Size of table is variable and here is what i come up up till now
VB:
Sub MoveText()
Dim WBook As Workbook
Dim WSheet As Worksheet
[Code].....
I am needing a custom format for the following. I need a cell entry to be 1 letter, three numbers, a dash, 5 numbers, a dash, two numbers, a dash, and then two number. Example: A109-54785-13-00. The first letter will almost always be an "A."
To further complicate the matter, the entry is copied from an email and pasted without the dashes. In the above example, the number in the email would read, "A109547851300." I copy it from the email and paste it in the proper cell in the worksheet. I would like the custom format to automatically enter the dashes at the appropriate spot.
If it was all numbers, this would be easy. I created a custom format for the numbers, but when the A is included, Excel no longer treats it as a number and the custom format did not work.
Is this possible in Excel (without VBA).
I could use the custom number format I created and then later go back and add the "A" at the beginning, but that is as much work as manually adding the dashes.
i need to have 6 or so cells copied and pasted into another sheet. (when a button is pressed) However before the data is pasted it checks if there is anything in the cell(s) that are being pasted into, if there is something then move down a line and paste. Here is the code i have already:
Sub Order2Invoice()
Sheets("OrderDatabase").Select
Range("B65536").End(xlUp).Offset(1, 0).Select
With ActiveCell
.Value = Orderform!G5.Value
.Offset(0, 1) = Orderform!E10.Value
.Offset(0, 2) = Orderform!E11.Value
.Offset(0, 3) = Orderform!E12.Value
.Offset(0, 4) = Orderform!E13.Value
.Offset(0, 5) = Orderform!E15.Value
.Offset(0, 8) = Orderform!E15.Value
End With
Sheets("Invoice").Select
End Sub
I am looking for a Macro that would randomly select 20 items from my inventory list for performing spot checks. Column F of Active Coil Log tab is where the data would need to pull from, however I would like all data in the row to go along with it. I've explored the RAND functions, but they don't seem to be the right fit .
View 2 Replies View RelatedI want find the data in some rows that same with one or more cell and automatically fill the data. And for more details, I have attached the examp file (Examp.xls).Antoni
View 3 Replies View RelatedI have an excel workbook with 2 worksheets. One worksheet shows the MASTER LIST of COMPLETE Customer Names (e.g. ABB Supplies Incorporated). The other worksheet has information on customers but the customer names typed in are incomplete (e.g. ABC Supplies). I need a macro that would look do a comparison of the customer names in the 2nd worksheet to the Master List worksheet and pull the data (complete name, address, etc.) for those that would match (partial match since company name is 2nd worksheet is usually incomplete).
View 2 Replies View RelatedI want the script to find if the value entered in the form is matching the values in column 'A' in the database and if it matches then it needs to select the cell as active cell - to populate the form details. And if there is no matching value found, the script needs to select the last empty cell of the column 'A' to populate the data entered in the form.
1) Form has 10 different fields that needs to be filled by the user.
2) Field 1 - is a text box for 'Request #' to be entered by the user.
3) After filling in all the fields - once clicked on OK, the form should search for the the 'request #' entered on the form in the database (Form and the database are in the same workbook).
4) If the 'Reqeust #' in the Column 'A' matches the the 'Request #' entered in the form, then the matching cell should be selected (Activecell -Were the data can be overwritten, with the new entry)
5)If there is no matching 'Request #' found in the database, the script should loop to select the next available blank cell in column 'A'. So that the form data can be entered.
I am trying to create a formula, but my knowledge of excel formulas is very new! I am trying do create an excel formula which calculates the difference in video view data which I enter, comparing today to yesterday to see the growth.
My column A is dates. My column B is video data.
Is there a way Excel can work out the TODAY date's data and minus YESTERDAY date's data to find the growth?
My thinking is that this would look something like the following, but I'm not sure how it would be written in Excel's formua:
Where Column A is = TODAY (), conduct sum where TODAY () minus data from yesterday (TODAY () -1).
-Find TODAY ()
- FInd TODAY'S associated data
- Find YESTERDAY or TODAY -1
- FInd YESTERDAY'S associated data
- Minus Yesterday from Today to find the difference.
The 1st set is in a column. Nice & tidy all twelve characters in length & alpanumeric
zx0123123123
zz0123123124
zy0123123129
The second set is a mess, taken from a lotus notes inbox from the subject line off an email, eg. there Blah blah zz0123123124 etc etc. What I want to do is do a reconcilliation between the two with a lookup, but have no idea which route to go down to get round the messy data. I have been using =IF(ISNA(MATCH(A1,'[spreadsheet to lookup to.xls]sheet1'!$A:$A,0))," No match"," Match")
but here the data is clean. I have searched teh forum ;o) DaveH & found something about > Instr() but this can't be used in formulas..
I have a table with 500 entries which is some physical properties for some chemicals. What I am needing to do is get something to find out what chemical formula the user has typed in another cell on a separate sheet, then VBA finds the component on this table and picks out information from columns within that row. Some of that data will then be used to do a calculation. The user can select up to 20 components, so VBA needs to be able to do it for 1 or anything in between 20 components. The data which I need to use for further processing is within columns D to J.
View 1 Replies View RelatedI need to indicate in a dedicated cell any number I place in the column below it by just scrolling up and down. Example: A1 for the readout cell, A3:A25+ for numbers. The same for as many columns as I need. They are used for a graph and only changing by hand will give me the results I need. Otherwise, I must change each of the readout cells one number at a time to solve. Basically, its find the cursor; an Excel slide pot. IF statements would be difficult in the readout cell as the data could be extremely long, 200 or more.They will not be constant length.
View 11 Replies View RelatedMy great VBA template has been broken.
The formula below worked great until i agreed to user request for formulas in the last x rows at the botton of the table
Lastrow1 = wsInpt.Range("E" & Rows.Count).End(xlUp).Row
How I amend this line to count rows with actual data in them?
I have a spreadsheet which is fed from an IT system and the length of the header rows seems to vary... i therefore need to start the VBA routine from the first row with data in column A.
way to find the last row or column to contain data in a spreadsheet when you don't know what the row or column will be?
I have spreadsheets with differing numbers of rows and columns being looked at, and I want to return the maximum column/row address that I need to parse to cover all the data.
##UPDATED## Hello
understanding the IF forumlas to calculate rows with whole numbers in them for the last columns
CBOOK1.xlsxBOOK1.xlsx
I constantly use the following to determine the last row in a worksheet for loop control purposes.
[Code] ......
In my current problem i have a worksheet that has been formatted such that the code above returns a value of ,say 150 where as the actual data stops at say row 34.
If I "watch" the value in Col A I see A34 = "1513(a)" which is valid data and A35 = ""
I can easily cycle through the worksheet and calculate the last used row myself but I am always looking for ways to let "VBA do the heavy lifting" when I can
I want to be able to find all data of same value under divcode (column A ) in worksheet1 and have it put into like columns in worksheet2. I would even settle for it selecting all the cells so i can copy and paste if i have to go that route.
Example below: find all data under divcode (column A ) that is equal to mpo and put.........
I need to place the cursor into the first row of a filtered list, column A.
For example, I have a list from row 6 through row 4500, columns A through AB
I've written the macro to set the autofilter on and apply my selection criteria.
At this point, in this example, the first row of filtered data (below the header row) is in row 3083. I need to move the cursor to cell A3083 and then type in a formula.
I have a while loop to color my rows down to row 2000 but all the time color way more than needed. I like to change the while loop or replace with better code statement that will see last row of (A:A) that has data and stop there, then to keep color code rows to 2000.
View 4 Replies View RelatedI want to find some code that will search down a column until it finds one of a number of different words. when it finds one of the words it stops and deletes the row on which the word is contained. after deleting the data in the row, it continues searching down the column until it finds another of the words.
for example......see work sheet attached,
I want some code that will search down column B until it finds Sally or Robyn. As soon as it finds either of these names it stops and deletes all the data in that row and then continues searching down column B to find Sally or Robyn again........
Is using a loop the best way to go with this?
MOD: thread moved to parent Programming forum (VBA)
Open the workbook called get_status.xls then run the user form. Enter 123456 into the textbox then click the Get Status button. I want to get info about the item from the workbook called object_status.xls which is on a network drive (known location) and is not open. Do I have to open this workbook to look for data in it?
So I have to find the matching text string, then get the value of the adjacent cell. If the text string is found in cell B5, then return the value from C5. Always look in the B column for the matching string. After the info is found, close object_status.xls and write the value to the label in the user form (lblResults) in the get_status.xls workbook. If 123456 does not exist in the object_status.xls workbook, then return "Unknown" to the user form.
I need a formula that will allow me to search a column (B1:B19989) that
contains text with the data from a column (A1:A32417) that contains a list of
part numbers and display a result(True/False) into another column (C). Column
B's text has the part numbers mixed in with the text. I need to know which
numbers from column A are found within the text of column B.
This is what I have tried in C1: =VLOOKUP(A1,CATALOG,2)
All I get is #N/A - I know that the value in A1 exists in CATALOG
CATALOG=The name of array B1:B19989
Example: Milburn Corp- -Invalid date range
Desired outcome: Milburn Corp
Lets say Milburn is in cell A1. I used the following formula which did not work. I kept getting a Value error message
=a1,find("- -",a1,1)-1)
I have a sheet with 12 months in it, each in a column. As month's go on, I put the cumulative sales figures (YTD sales) in the given month. What I'm trying to figure out is how in the 13th column (i.e. the one after december), can I have it show the value of the most recent cumulative sales (i.e. if we are in May, there will be sales data for jan, feb, mar, and april and I want column 13 to show the value of April since it will be the month that last has data.
View 4 Replies View RelatedBasically I need a formula that work as below. It's over two sheets and is probably very easy to most of you I just cant get my head round this one!!
If B1 (sheet 1) = "TEXT1" ,FIND the content I1 (sheet 1) within a1:a3000 (sheet 2). If I1 is found in that range i need to know the text in the cell next to the found text.
E.g.: the text of I1 (sheet 1) was found in cell a234 (sheet 2) so it gives me the text in b234.
i have is that at current i have a load of data (6000 cells worth)
What i need to do is to go through the data and highlight anywhere where it may have the word "in/outsourcing" (The data is based in cell AA which is just a description of text)
Other than doing Ctrl F through each cell is there a faster way in which excel can search through the cells and even highlighting the cell where the word occurs.
I thought if the word "sourc" is searched this would then pick up both
FIND a unique number in column B from a variable number in cell A1 (1000-9999). I do not want to use Vlookup and prefer to avoid a prompt for operator entry
View 9 Replies View Related