I have question does excel 2003 can automatically to copy from another workbook ! if it can, I shall kick of many time in daily job,
I need daily report the caps, source date get from below path by a date to drawing down.
Can it fix the Range with the location path copy and paste.
location at "C:Documents and SettingsFFFFMy DocumentsSummaryMay 01
Copy over data from different workbooks and using paste special values to paste it into a new workbook using a macro. Here is what I have and what I am looking for:
My file path is
C:Documents and SettingsMy DocumentsProjectCostsDecember12
In this folder I have workbooks called:
Function1
Function2
Function3
In each workbook I have 4 worksheets
Cashable12-13
NonCashable12-13
Total12-13
GrandTotal12-13
I also have a workbook called DecMonthlyTotal in the same folder with the same named worksheets.
I am looking for a macro to be placed in the DecMonthlyTotal that will pull the data from the Cashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name Cashable12-13, it will also pull the data from the NonCashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name NonCashable12-13
Both the Cashable12-13 and the NonCashable12-13 have Columns A - G The row that the macro should start the copying from is Row 3 for each of the workbooks; however I don't have an end row for the workbooks as this will vary.
I am using Excel version 2003.
i have a macro that opens 10 other workbooks and copies cells onto a "master" workbook. Until recently, everything worked fine. Suddendly, while it opens the 9 books and copies as it is expected, but when it opens the 10th wb, the macro breaks at a very simple copy/paste.
The weirdest thing is that after it breaks, I cannot select any cells neither in the opened wb nor in the master wb. This continues even after I press the "reset" button in the vba. So, I am only able to select objects (text boxes etc) in my wb and not any cells.
Also, the "arrow" icon on the design toolbar is not active. And I've tried pressing and de-pressing the F8 key, but I still cannot select any cells.
I have option explicit in the beginning of my macro. And i'm using excel 2003.
Public preValue As Variant 'Declares a variable to be used in both macros
'This is the first line for a macro that runs when a cell is changed.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub 'Limits the change to 1 cell only
If Intersect(Target, Range("$A$1:$M$42")) Is Nothing Then Exit Sub
Target.ClearComments 'Clears any existing comment
Target.AddComment.Text Text:="Previous Value was " & preValue & Chr(10) & "Revised " & Format( Date, "mm-dd-yyyy") & Chr(10) & "By " & Environ("UserName") 'Adds a new comment with the text. CHR(10) is a return.
End Sub
'This code sets the variable preValue when a cell is selected
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub 'Limits code to 1 cell
If Intersect(Target, Range("$A$1:$M$42")) Is Nothing Then Exit Sub
preValue = Target.Value 'Set the variable preValue to the selected cell's value
End Sub
How do I take the changes made from the first work book and insert them in a cell on the second work book. Where in the code above do I Put this command.
I have a column full of numbers e.g. 1,2,3,4,5,6,7 etc..
i need to run a program that automatically goes down the selected column and places a hyperlink based the number in EACH cell. e.g. if the cell number is 4, then the link should be
http://www.somsite.com/4
each cell has a unique number
basically i need a macro that can do the following:
for all cells selected in column
get first cells
get info from cell
insert hyperlink+info;
increment cell
end
I'm designing a workbook to track psychiatric patient data. The workbook has identical worksheets for each month of the year (Jan, Feb, Mar, etc.), plus an Admin sheet for overhead. I need to devise a formula that will automatically detect 30-day readmissions (i.e., patients being admitted to the hospital within 30 days of a prior admission) and return a "Y" for a readmit and an "N" for a discharge or first-time admission. I have tried several variations on SUMPRODUCT with multiple conditions spanning multiple sheets (using INDIRECT and a monthly worksheet index -- A1:A12 -- on the Admin worksheet), but the results always turn out...wonky. (Sometimes a correct value is returned, and sometimes not. I can't figure out what is causing this inconsistency.) The relevant ranges from the monthly worksheets are:
B3:B52 : Date of evaluation
H3:H52 : Unique patient ID number
Y3:Y52 : Patient disposition (i.e., admitted or discharged)
AC3:AC52 : Readmission status (i.e., yes or no)
The formula should only return a "Y" value if a) the patient was previously admitted within 30 days of the evaluation date, and b) the patient was also admitted on the evaluation date.
I am using Excel 2003, so SUMIFS is not available.
I got a workbook with one active sheet. There are 6 colums and 55 rows. I want to creat a macro or formula to automatically print each individual row on a single sheet of paper. i will only need the line with a specific value printed i.e only print value more then 5
View 9 Replies View RelatedUsing Excel 2003.
I have a hyperlink from cell M2 in a worksheet to cell B2 in another worksheet. I typed the cell reference on the target worksheet as B2. this works fine. The problem is that when I copy/paste the hyperlink down the column, the reference cell stays at B2. I need the reference cell to change when copied down to B3, B4, etc.
How to amend existing code in a workbook that is used by many different users. I am working in Excel 2003. The existing code copies data from certain cells in the active worksheet (which is password protected) into a new worksheet and saves that new worksheet to a temp folder, sends it to a particular email address using outlook and closes it, returning the user to the first workbook. You will see that it also unhides then rehides columns of the first worksheet during this process so that the user never has to see them. Problem here is that none of the users are using outlook anymore and I would prefer that this new spreadsheet that is created just be saved to the users desktop. I have found bits and pieces of what I needed on the web, but I can't seem to put it all together (I usually end up being sent to the debugger just short of having the newly created spreadsheet saved to desktop). Here is the existing code:
Private Sub CommandButton1_Click()
Range("A2:G2").Select
Selection.ClearContents[code]....
Essentially what I need to do is circumvent the whole email bit and save the spreadsheet that is created to the users desktop instead of a temp folder.
I've added some code the adds a button to a worksheet
Public Sub AddSheetPrintButton()
Dim btn As Button
Dim t As Range
Set t = ActiveSheet.Range(Cells(1, 6), Cells(1, 7)) ' button position
Set btn = ActiveSheet.Buttons.Add(t.Left, t.Top, t.Width, t.Height)
With btn
.OnAction = "sheetPrint"
.Caption = "Print Sheet"
.Name = "Print"
.Font.ColorIndex = 10
End With
End Sub
This works fine until the workbook is shared!
I have a workbook that has multiple functions. One of these function is that when the user select a key word from a drop down validation list, a VB code transfer all information from that row from Column A to column W to the next available row on another tab.
VB:
If Not Intersect(Target, Range("X:X")) Is Nothing And Target.Cells.Count = 1 Then
Application.EnableEvents = False
If LCase(Trim(Target.Value)) = "yes" Then
[Code] ....
Is there a possibility to transfer this information into another workbook. Instead of transferring the info to a tab name "Archives" to transfer in another workbook. This workbook will only have one tab called "Archives".
This will minimize the information within my Initial workbook in project.
The path in the new workbook where the information should be transfer should be in:
"C:Documents and Settings"username"My DocumentsMy Data Sources" to an excel workbook that will be named Archives.
I know that the "Archives" workbook need to open then close after the information has been inserted...
The other day I inserted a row in a shared workbook and then saved it. On my screen, the inserted row was visible and was the correct row height of 12.75. My goal was to insert the row so another user sitting next to me could enter information in the new row.
After I saved the workbook, and after the user sitting next to me saved her workbook, the row I inserted should have appeared exactly the same on her screen, but it did not. Instead, the inserted row showed up as a hidden row on her screen. It was there, but the row height was collapsed to the point of invisibility.
I repeated my attempt to insert a row which the other user could edit several times, but each time I got the same result. I could not make the row show up on her screen with a row height of 12.75.
Shared workbook in Microsoft Excel 2003?
I have a group of Excel (2003) template files, each with a different name. When these files are opened they ask for certain information and save themselves as a unique name. Within these files are VBA routines and functions and, because these files basically do the same things, they have the same name. These routines exist in their own unique modules each with a different name. Unfortunately, in these files there are differences in the number of columns of information these routines act on so once they have been saved I need them to only act on their own columns only.
My problem is, when I have more than 1 of these files open in the same instance of Excel, I try to run a file using a control letter combination Ctrl-e and it sometimes runs the version of the macro in the wrong file. This leads to all kinds of strange thing happening. What I can do to force the correct macro to work in all instances?
I've written some very simple code to copy from one sheet and paste into another:
Sheets("t").Select
Columns("A:E").Select
Selection.Copy
Sheets("Code by QC").Select
Range("A1").Select
*ActiveSheet.Paste
When i run it, it works but I get a
*run-time error '1004':
Paste method of Worksheet Class Failed
Why is it doing this even though it's pasting what i want it to paste? It's preventing the rest of the macro from running.
Could it be due to me copying data from a filtered set
I'm new to this forum and to VBA
First-off, I'm using Excel 2003 SP3.
The setup: A software application I regularly use produces csv data files (in this case approx 300 files). These I have converted to xls format using a separate macro. The files are in one folder and named as follows eg
G1 18800.xls
G1 18802.xls
G2 18975.xls
G3 19881.xls
G3 19990.xls
G5 19990.xls
etc
The files contain the following data:
DATE TIME VALUE STEPS EXCL ACCEL
01-Oct-03 08:00 0 0 FALSE 0
01-Oct-03 08:01 0 0 FALSE 0
01-Oct-03 08:02 0 0 FALSE 0
01-Oct-03 08:03 0 0 FALSE 0
01-Oct-03 08:04 757 20 FALSE 0.18
01-Oct-03 08:05 1714 32 FALSE 0.44
01-Oct-03 08:06 1524 32 FALSE 0.39
01-Oct-03 08:07 1665 45 FALSE 0.47
01-Oct-03 08:08 1644 42 FALSE 0.46
01-Oct-03 08:09 263 8 FALSE 0.06
etc
I then created a macro using code I sourced from the internet, and included some addtional commands (filename, copy/paste). See below. This macro opens the all the xls data files in the folder and copies the relevant data to an analysis workbook [Analysis sheet, Results sheet, Master sheet] ie the data is copied from the data file and pasted into the Analysis worksheet. Then the results are copied from the Results sheet to the Master sheet. So far so everything works.
My problem is this: I'm stumped at how to delete rows from the xls data files before running the analysis workbook and macro. In other words, after converting the csv files to xls format I need to clean the xls data files.
I have a separate xls file with criteria data in two columns:
FileName Date
G1 18800 06-Oct-03
G1 18801 02-Oct-03
G1 18801 03-Oct-03
G1 18801 05-Oct-03
G2 18795 14-Oct-03
G2 18795 15-Oct-03
G2 18795 16-Oct-03
G2 18795 17-Oct-03
etc
The rows in a particular data file, with dates that are not present in the Criteria workbook must be deleted. This to be done for every data file in the folder. Also, I need to exclude rows for specific time periods eg 12H00AM - 04H00AM from all the files irrespective of date.
the code needed [should a separate macro be run or can code be placed within the present macro?]. I've tried looking for something similar on the internet, but my requirements seem too customized to be able to adapt the code that I found. And of course this is waaaay above my present skill level!
Option Explicit
Sub CopyPaste()
'This code opens up data files (xls) in a specified folder and copies data A1:G17281 to an Analysis workbook (Analysis sheet).
'The data from the Results sheet is then copied to the Master sheet.
Dim wkbDest As Workbook
Dim wksDest As Worksheet
Dim wkbSource As Workbook
Dim wksSource As Worksheet
Dim MyPath As String
Dim MyFile As String
[Code]...
how to write a macro to copy a set of multiple columns (non-consecutive) from a specified row, onto a new sheet. Ie, it is always the same columns, while the row changes with the imported data.
Specifically, these are the columns I want to select, Range("B:B,D:D,F:F,H:H,J:J,L:L,N:N,P:P").Select
Moreover, I want to specify which row to copy from, in a cell (ie, "11"). So that when I run it, values from B11,D11,F11...P11, will be copied.
I have attached a workbook (excel 2003), I have few userforms in it.
I tried to copy data from all the tabs in the workbook to "Master" tab but getting an error.
You have to login to file details are as below:
I'm trying to use a VBA Macro to copy and paste a row of cells from 14 worksheets into in another worksheet in a Colum. The worksheets are entitled Data 1, Data 2, Data 3 and so on until Data 14 and the worksheet that I want to paste the data to is entitled sheet 1. The row of data that I want to copy and paste is in the same place on each worksheet C4 - IR4. I can do this using the Macro recorder but there is a lot of code and ultimately I want this to be part of a much bigger Macro once I get better at figuring this stuff out.
I have read that this can be done by using a Do Until and then using a loop. By the way I am using Excel 2003 with XP.
I have a master list of Players on one sheet B2:B72 and in E2:E72 is a column called Playing and in it is "y" or "n". I need to make a list of the Players that are Playing on another sheet without blank rows (I can do it but it leaves blank rows for the Players that have a "n" from column B. I am using 2003
Here is the formula I am using now: =IF(Players!$E3="y",Players!$B3, " ") but I get blank rows for the player that are not playing.
I'm trying to copy parts of a worksheet from excel 2003 to word 2003. I've found code that does this alright but I need to be able to re-size the the pasted data to fit the word document. Is there a way to set the properties of the word document like change it to landscape and move the margins etc? Even a simple "reduce the table size to fit the word document". I've included the code i've got already. This code will open up a word document and copy your cells into it but without any useful options. So its ok for a small group of cells.
View 1 Replies View RelatedI'm trying to create a vba script that conditionally copies a row to another sheet in my workbook, then deletest that original row. In this demo version, the condition would be that a cell in column A is empty.
I've searched all over, and there seem to be so many different solutions for copying and pasting rows, but when I apply them to my script, I always get a "Type Mismatch" error at the point of copy/paste (Line17).
Code:
Sub CopyPasteDelete()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
'Start search in row 3
LSearchRow = 3
[Code] ......
Running Excel 2003 if that makes a difference
I have spread sheet with food items listed. there are subcategories [i.e. bread items] followed by a list of items. then another category, and so on. i have a vlookup formula in the "non category merged cells' "BAKERY" is merged to create headerlike divisions. is there a way to keep the headers and copy the vlookup formula "through" the headers and leave the headers the way they are? i'm not very optimistic but you guys rule!
Paper123456dfssdfsdf456145sdfsddfsdf56465sdfdssdfsdfBakery34566/2 LB sdfsdf566/2 LB sdfsdf4566/30 OZ dsf
Creating a macro that updates and copies part of a worksheet in Excel 2003 and pastes it in MS Word. The sheet I have is a sheet that updates some prices etc and after it updates I usually select a square (part of the sheet), press CTRL+C to copy it and paste it as a picture (paste special ) in word. Is there a way to automate the process?
I am thinking a macro that updates the sheet, copies and pastes iit on word??
I can't seem to find a way to copy specific highlighted/selected cells in a filtered list column and paste them outside of Excel 2003. i.e. in Notepad.
It seems to copy all the data between what is selected.
My Filtered list shows rows 5, 28, 35, 40 and 56
If I selected A5, A28 and A40 and select copy
If I paste it into Notepad, it adds A5, A28, A35 and A40
However if I paste my selected copied cell into Excel it works perfect and only adds A5, A28 and A40.
I have three workbooks that contain various types of information. I have an Overtime workbook that lists employees and calculates the straight time and overtime worked for the day. This is the main log that information will be pulled from.
I need writing a macro that will copy over information to an Absent Log workbook and a Production Model workbook.
The Absent Log workbook:
This workbook contains worksheets from each month. I need excel to do a lookup of the name in the Overtime workbook and copy the information from the "OT" column but if that column is empty I need it to pull the information from the "Personal DT" column.
The Production Model workbook:
I need this workbook to automatically pull the total straight hours and overtime hours to the production model for the correct day. This will also pull from multiple sheets.
I am going to be writing this in Excel 2010 but it will be primarily used in Excel 2003.
I uploaded the workbooks to filefactory.
OT Workbook: [URL] ......
Absent "Log" workbook: [URL] .....
Production Model: [URL] .....
I've got 2 worksheets in the same workbook.
Sheet 1 contains huge amounts of data - thousands of rows and multiple columns
Sheet 2 - I want to extract the data from sheet 1 column A into sheet 2 column A but only the data from every 21st row.
I want to be able to copy the formula automatically down, otherwise it will take hours to do it manually. So far I can only get the cell reference to increment by 1 each time after copying.
So what I'm trying to achieve is :-
Sheet 2 A1 = Sheet 1 A1
Sheet 2 A2 = Sheet 1 A22
Sheet 2 A3 = Sheet 1 A43
I need to find the last instance of "IO" in column E and copy cells in columns B to E for the row below to another tab called "OP" cell O9.
I need the VBA code for Excel 2003.
Using Excel Office 2003.
I have been using VBA to copy and move files to create backups for 7 or 8 years now, and it works great. However, recently I have been working on a way to use SD cards for the backups and the FileCopy command is much slower than using Windows Explorer.
I am looking for some alternate command lines that might do the job faster. I would like to know what Explorer is using.
Using Excel 2003 and cannot copy a worksheet and am getting this error:
File not found: CDocumentTempVB4B.tmp
Copy data from workbook, open existing workbook, select range and paste. But my copied data is lost.
Sub Select_Copy_Paste()
'
'
Windows("ElektroFunctiesDatabase.xlsm").Activate
Sheets("PowerSupply's").Select
Range("A2:I6").Select
Selection.Copy
[Code] .........
' Here i need to do something to paste data into r.address?