Copy And Paste VBA (2003)
Mar 21, 2008
I've written some very simple code to copy from one sheet and paste into another:
Sheets("t").Select
Columns("A:E").Select
Selection.Copy
Sheets("Code by QC").Select
Range("A1").Select
*ActiveSheet.Paste
When i run it, it works but I get a
*run-time error '1004':
Paste method of Worksheet Class Failed
Why is it doing this even though it's pasting what i want it to paste? It's preventing the rest of the macro from running.
Could it be due to me copying data from a filtered set
View 9 Replies
ADVERTISEMENT
Jan 8, 2012
I'm trying to use a VBA Macro to copy and paste a row of cells from 14 worksheets into in another worksheet in a Colum. The worksheets are entitled Data 1, Data 2, Data 3 and so on until Data 14 and the worksheet that I want to paste the data to is entitled sheet 1. The row of data that I want to copy and paste is in the same place on each worksheet C4 - IR4. I can do this using the Macro recorder but there is a lot of code and ultimately I want this to be part of a much bigger Macro once I get better at figuring this stuff out.
I have read that this can be done by using a Do Until and then using a loop. By the way I am using Excel 2003 with XP.
View 6 Replies
View Related
Dec 19, 2011
I need to find the last instance of "IO" in column E and copy cells in columns B to E for the row below to another tab called "OP" cell O9.
I need the VBA code for Excel 2003.
View 1 Replies
View Related
Nov 24, 2012
Copy over data from different workbooks and using paste special values to paste it into a new workbook using a macro. Here is what I have and what I am looking for:
My file path is
C:Documents and SettingsMy DocumentsProjectCostsDecember12
In this folder I have workbooks called:
Function1
Function2
Function3
In each workbook I have 4 worksheets
Cashable12-13
NonCashable12-13
Total12-13
GrandTotal12-13
I also have a workbook called DecMonthlyTotal in the same folder with the same named worksheets.
I am looking for a macro to be placed in the DecMonthlyTotal that will pull the data from the Cashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name Cashable12-13, it will also pull the data from the NonCashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name NonCashable12-13
Both the Cashable12-13 and the NonCashable12-13 have Columns A - G The row that the macro should start the copying from is Row 3 for each of the workbooks; however I don't have an end row for the workbooks as this will vary.
I am using Excel version 2003.
View 1 Replies
View Related
Mar 29, 2009
I'm using 2003.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.
View 9 Replies
View Related
Aug 3, 2007
a macro that will take my excel sheet (using office 2003) and then pasted it in outlook.
Also I need cell A1 and cell B1 pasted in the subject line.
View 9 Replies
View Related
Nov 1, 2010
I made a planner for shared use.
Is there any way users can cut and paste while keeping the Conditional Formatting of the source cells intact? It is the same as copy-paste and then delete the source cell contents after copying.
Excel 2003
View 2 Replies
View Related
Jun 11, 2013
I have two spreadsheets in Excel 2003.
Spreadsheet 1 has 10 columns of data (A-J). I want to copy a variable number of rows from spreadsheet 1 to spreadsheet 2.
When I paste into spreadsheet 2, I'd like to automatically insert blank cells in three places, taking the total number of columns to 13. I'd like columns C, F and I to be blank, and the last column with data to be M.
I will perform this task regularly, and add the copied cells to the bottom of spreadsheet 2, so I'd only like to insert blank cells within the range that I'm copying, not the entire spreadsheet.
I will then populate the blank cells with a VLOOKUP function. Do I need another macro to automatically add the formula to the cells, or is there a way to include this in the cell-inserting macro?
View 1 Replies
View Related
Feb 23, 2008
I often need to use Paste Special . .. Values, using Excel 2003. So I recorded a Macro into "Personal.xls" and assigned a shortcut key combination "CTRL-Shift-V" so that it would always be available. I first select one or more cells and hit CTRL-C to copy to clipboard, click on another cell, then hit CTRL-Shift-V to run the following macro:
VB : Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
It often works . . . and it often fails. When it is working it seems to keep working over and over. When it is failing it keeps failing. So it is almost as if there are two "modes" of operation, which for lack of terms, for this post I will coin the terms "fail mode" and "fixed mode". Once I am in one of the two modes, it stays there for a while. When it is in the "fail mode", I always get the dreaded:
Run-time error 1004: "Pastespecial method of Range class failed".
Since this problem is very intermittent, I believe this is why there are so many posts in the Internet about this, and so many people are replying back "it works fine for me". I have seen many solutions offered but none work so far for just a simple shortcut key to do a PasteSpecial :Values. Some solutions "work" . . . such as adding the PasteSpecial button to the Toolbar, or pressing ALT-E-S-V <Enter> - but both of these bring up the Paste Special dialog box which I want to avoid.
I spent days trying the many solutions offered but so far all I have found is a trick to convert Excel from "fail mode" to "fixed mode". The trick is to add a line to the macro to first do a "Paste Special: Format:
VB:
Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
Then select and copy any cell/s, click on another cell, and run the macro just ONCE - it will paste the formatted value successfully and you are now in the "fixed mode". Now you can remove the PasteSpecial:Format line that you just added, to get back to the original macro with just the "Paste Special: Values" line:
VB : Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
Now Excel is in the "fixed mode" and the original macro will once again start working properly. BUT only for a while !! Then some time later, usually within a day or a couple hours . . . Excel goes back into that "mode" where once again the macro fails repeatedly. I have been unable to isolate what causes the mode to return to failure.
Any simple way to either change the code so that it ALWAYS is successful, why this often is not successful ? I believe that the fact that adding in the Paste Special : Format code and running it just once to fix the problem, also could be a clue as to what causes this problem to "sometimes" occur.
View 9 Replies
View Related
Feb 3, 2012
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
View 1 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Jun 20, 2013
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
View 9 Replies
View Related
Sep 6, 2012
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies
View Related
Oct 1, 2012
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
View 2 Replies
View Related
Nov 25, 2012
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
View 2 Replies
View Related
Feb 4, 2014
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
View 7 Replies
View Related
Jul 3, 2012
how to write a macro to copy a set of multiple columns (non-consecutive) from a specified row, onto a new sheet. Ie, it is always the same columns, while the row changes with the imported data.
Specifically, these are the columns I want to select, Range("B:B,D:D,F:F,H:H,J:J,L:L,N:N,P:P").Select
Moreover, I want to specify which row to copy from, in a cell (ie, "11"). So that when I run it, values from B11,D11,F11...P11, will be copied.
View 4 Replies
View Related
Jun 4, 2008
I have question does excel 2003 can automatically to copy from another workbook ! if it can, I shall kick of many time in daily job,
I need daily report the caps, source date get from below path by a date to drawing down.
Can it fix the Range with the location path copy and paste.
location at "C:Documents and SettingsFFFFMy DocumentsSummaryMay 01
View 9 Replies
View Related
Jan 22, 2007
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
View 9 Replies
View Related
Jul 10, 2006
I want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information.
I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information.
i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281.
It falls over on the very last line of code I can see A5281 selected but it won't paste....
View 9 Replies
View Related
Oct 10, 2007
When I copy from Excel 2003 (values & formulas) and paste special into Excel 2007 i get the option screen to select unicode text,sylk etc instead of the other screen with the option of values,formulas,formats etc.How can I select the option for value,formulas?
Sorry cannot attach a screen shot as it is above the allowed limit.
View 9 Replies
View Related
Mar 20, 2014
I have a master list of Players on one sheet B2:B72 and in E2:E72 is a column called Playing and in it is "y" or "n". I need to make a list of the Players that are Playing on another sheet without blank rows (I can do it but it leaves blank rows for the Players that have a "n" from column B. I am using 2003
Here is the formula I am using now: =IF(Players!$E3="y",Players!$B3, " ") but I get blank rows for the player that are not playing.
View 3 Replies
View Related
Mar 30, 2014
I'm trying to copy parts of a worksheet from excel 2003 to word 2003. I've found code that does this alright but I need to be able to re-size the the pasted data to fit the word document. Is there a way to set the properties of the word document like change it to landscape and move the margins etc? Even a simple "reduce the table size to fit the word document". I've included the code i've got already. This code will open up a word document and copy your cells into it but without any useful options. So its ok for a small group of cells.
View 1 Replies
View Related
Apr 26, 2012
I'm trying to create a vba script that conditionally copies a row to another sheet in my workbook, then deletest that original row. In this demo version, the condition would be that a cell in column A is empty.
I've searched all over, and there seem to be so many different solutions for copying and pasting rows, but when I apply them to my script, I always get a "Type Mismatch" error at the point of copy/paste (Line17).
Code:
Sub CopyPasteDelete()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
'Start search in row 3
LSearchRow = 3
[Code] ......
Running Excel 2003 if that makes a difference
View 3 Replies
View Related
Oct 27, 2008
I have spread sheet with food items listed. there are subcategories [i.e. bread items] followed by a list of items. then another category, and so on. i have a vlookup formula in the "non category merged cells' "BAKERY" is merged to create headerlike divisions. is there a way to keep the headers and copy the vlookup formula "through" the headers and leave the headers the way they are? i'm not very optimistic but you guys rule!
Paper123456dfssdfsdf456145sdfsddfsdf56465sdfdssdfsdfBakery34566/2 LB sdfsdf566/2 LB sdfsdf4566/30 OZ dsf
View 9 Replies
View Related
Sep 25, 2009
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data()
Dim wb As Workbook, wbDest As Workbook
Dim ws As Worksheet, wsDest As Worksheet
Dim lngCalc As Long
Dim FoundCells As Range
Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF")
Set wbDest = Workbooks("FY09 PR Log Blank")
Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application
.ScreenUpdating = False
lngCalc = .Calculation
.Calculation = xlCalculationManual
End With
For Each ws In wb.Worksheets.............................
View 9 Replies
View Related
Nov 29, 2011
Creating a macro that updates and copies part of a worksheet in Excel 2003 and pastes it in MS Word. The sheet I have is a sheet that updates some prices etc and after it updates I usually select a square (part of the sheet), press CTRL+C to copy it and paste it as a picture (paste special ) in word. Is there a way to automate the process?
I am thinking a macro that updates the sheet, copies and pastes iit on word??
View 4 Replies
View Related
Jan 19, 2012
I can't seem to find a way to copy specific highlighted/selected cells in a filtered list column and paste them outside of Excel 2003. i.e. in Notepad.
It seems to copy all the data between what is selected.
My Filtered list shows rows 5, 28, 35, 40 and 56
If I selected A5, A28 and A40 and select copy
If I paste it into Notepad, it adds A5, A28, A35 and A40
However if I paste my selected copied cell into Excel it works perfect and only adds A5, A28 and A40.
View 2 Replies
View Related
Feb 5, 2012
I have three workbooks that contain various types of information. I have an Overtime workbook that lists employees and calculates the straight time and overtime worked for the day. This is the main log that information will be pulled from.
I need writing a macro that will copy over information to an Absent Log workbook and a Production Model workbook.
The Absent Log workbook:
This workbook contains worksheets from each month. I need excel to do a lookup of the name in the Overtime workbook and copy the information from the "OT" column but if that column is empty I need it to pull the information from the "Personal DT" column.
The Production Model workbook:
I need this workbook to automatically pull the total straight hours and overtime hours to the production model for the correct day. This will also pull from multiple sheets.
I am going to be writing this in Excel 2010 but it will be primarily used in Excel 2003.
I uploaded the workbooks to filefactory.
OT Workbook: [URL] ......
Absent "Log" workbook: [URL] .....
Production Model: [URL] .....
View 1 Replies
View Related
Nov 28, 2013
I've got 2 worksheets in the same workbook.
Sheet 1 contains huge amounts of data - thousands of rows and multiple columns
Sheet 2 - I want to extract the data from sheet 1 column A into sheet 2 column A but only the data from every 21st row.
I want to be able to copy the formula automatically down, otherwise it will take hours to do it manually. So far I can only get the cell reference to increment by 1 each time after copying.
So what I'm trying to achieve is :-
Sheet 2 A1 = Sheet 1 A1
Sheet 2 A2 = Sheet 1 A22
Sheet 2 A3 = Sheet 1 A43
View 3 Replies
View Related
