I am using EXCEL 2007. When I refresh the individual pivot tables, I don't get any error. But when I click on Refresh all Pivot, I get a Reference if not valid error. The source for my pivot is referencing to another workbook. Why is there this error and how can I resolve it?
View 4 RepliesExcel 2007
No empty rows
No empty cells
No calculations in cells
Field names look fine - no punctuation no merged cells
If I select one column - any single column I can generate a pivot table but not with multiple columns
I've been trying to create pivot table in excel 2010. Unfortunately I've been getting this message "Data source reference is not valid"?
View 2 Replies View RelatedI have encountered some difficulty in modifying a macro I wrote into what I need. I created a macro that searches a column (Column C) for a cell value of, "stop", and then it copies everything above that cell and pastes it onto another sheet. In the sample data set that I was using, "stop" first occurred in cell C541, so the macro copies C1:C540 and pastes it onto another sheet. The problem is that the macro created an absolute reference to C540. What I desire is for the macro to use the 'Find' function to locate the first occurrence of, "stop", offset one cell above that cell, and then reference the active cell (which was positioned by these last two steps) in the range that should be copied. Basically, I'm hoping to have cells C1 through the active cell copied and then pasted onto another sheet.
Code below.
Sub FAIL()
'
' FAIL Macro
'
'
Sheets("Reformatted").Select
Columns("C:C").Select
Selection.Find(What:="stop", After:=ActiveCell, LookIn:=xlValues, LookAt _
[Code] .......
On a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
I used the vba recorder to get the code and didn't change one thing, and now I am getting an error when i click on the command button to execute the code.
error
Run time error 1004
The sort reference is not valid. Make sure that it's within the data you want to sort, and the first Sort By Box isn't the same or blank.
Row 1 = column headings
row 2 is the first set of data, *****, however, most of the data in the column is blank. There are only 2 options, (Yes) or blank, and I am trying to sort the sheet so all the (Yes) appear at the top
when i did the macro recorder, it seemed to work.
I am having problems in Excel 2007 using hyperlink formula to jump to a different worksheet in the same workbook.
Filename: Model Variables.xlsx
Worksheet to seek: Org Structure
Cell to seek: A1
Formula tried: =HYPERLINK("[Model Variables.xlsx]Org Structure!B4", "My Cell on different sheet")
Error: Reference is not valid
I am trying to create a pivot table on a new sheet names as 4x4
I am getting following error:
Error : 1004
Reference Not Valid
I am not sure where is the problem. I have generated this code by using macro recorder and just changed the source and destination of the pivot generation code.
Here is my situation:
I created one worksheet called: Assumptions. In this worksheet I have 6 different columns representing 6 different cases.
I have completed the first case in a different worksheet called: WL. I would like to copy this case/worksheet WL and be able to change all the reference cells used in case#1: WL to case#2: FA. So all the cells used in my Assumptions worksheet were in the B columns for case 1: WL, for case 2: FA they will all be in the C column, same row, different column.
Any quick way to do the changes?
My case #1 worksheet as over 10 000 formulas, I really don't want to change each and every formula.
I was thinking there was a way to highlight ALL the reference cells used in my Assumption worksheet, so I would have had to drag from B to C cells, only 50 cells. But I can't find it.
I am running EXCEL 2007 on XP. What is the EXCEL cell formula to put in a cell (for example"E5") that will reference the "last" occurrence of a specific text string in column A (For example Chard ) but will show its corresponding column B content (for example its PH number 3.45) regardless of the number of data entries that will be inputted in the future for both column A and B.
A B C D E
1WINEPH
2Chard3.24
3Merlot3.36
4Cab 3.44
5Merlot3.38 xxx
6Chard3.26
7Chard3.45
8Cab 3.41
9 Merlot3.33
10
I am migrating a bookkeepping spreadsheet from Quattro v12 (c2001) to Excel 2007 and have hit a stone wall over relative 3-D references.
In this workbook each sheet holds data for one month, and this includes some lagging-12-month calculations -- that is, summing a range on a single cell for the preceding 12 sheets (including this one).
Unexpectedly, this formula:
=ISUM('201206:201305'!M6)
gives absolute references, even though I put in no dollar signs after the sheet names. This means it gives the wrong answer when copied to the next sheet to start a new month.
I can find no reference at all to converting the above formula from absolute to relative reference.
I'm having a problem with named ranges in a chart. I'm using Excel 2007 in Windows XP.
I have a line graph with twenty different series all using dynamic ranges. I created each series individually, typing the name and then the dynamic range I had previously defined. As far as I am aware, Excel demands when writing the reference that you specify which sheet/workbook this named range is from, so, given the scopes of my ranges are all 'workbook', I added the name of the workbook to the references.
e.g.
Series name:
Series1
Series values:
='workbook name'!range1
This seems to work fine, but when I save and then re-open the file, the dynamic ranges no longer work. If I go to Select Data and look at the reference for a series, it has been changed thus:
Series values:
=[0]!range1
I am having trouble making any formula references between 2 different workbooks.
For example, I being typing out my VLOOKUP function on 1 sheet, as soon as I get the table argument, I switch over to the other workbook in which the table is, and I no longer have the VLOOPKUP function active.
I am having this problem for any formula in which I am trying to reference this workbook.
I have ensured they are both saved as Excel workbook documents. I am using Excel 2007
I am trying to do some basic VBA in my spreadheet, I just want to create an auto-open statement that inputs then next sequential number in column A1 every time the s/s is opened i.e.1,2,3,4 .....
I am using excel 2007 and my knowledge is very limited. I used a code:
Sub AUTO_OPEN
Range("A1") = Format(Range("A65536"), "YYYYMMDD") & Right(Range("A1"), 3) + 1
End Sub
(the first time you open the file you would need to add the first entry '20021122001)
But this does not work and I get a compile error when run thru debugger.
I have a set of sales data and need to create a run rate which is simply = Total Sales/Selling Day
Selling day changes most days.
I put the calculation into my pivot data but it's summing up, (instead on 12 I get 720) so I changed this to Average so I get the right figure in the Pivot but when I then use this field, it doesn't use the Average amount, it uses the summed figure.
So what I need is Total Sales/X
X = Cell Reference
I have the need to email the current worksheet in Excel 2007, which I have been able to do with the following ...
Sub SendTab()
'Declare and initialize your variables, and turn off screen updating.
Dim wks As Worksheet
Application.ScreenUpdating = False
Set wks = ActiveSheet
[Code] .......
Is there a way I can also get it to also rename the sheet from the default "Book1" to the information in a referenced cell.
I'm working on a decision matrix to evaluate different alternative production methods. Before that criteria have to be choosen and weighted against each other. The user would fill out the yellow/ blue cells with (0=less important; 1=equally; 2=more). Then values are added up and put into some kind of ranking.
The example was done by hand, which costs a lot of concentration. I would now like to extend the matrix - do you know how to fill out the grey cells more efficiently?
(Excel 2007, Win7)
I've 1000's of website URLs which I need to open one at a time, and check if the page contains message such as 'Product not found' or 'Oops...' or 'Page not found' or 'Error'
Is this possible using Excel / VBA ?
[URL]
If C5 refers to the value in cell C100, C6 refers to the value in C110 ten rows below. C7 refers to C120, ten rows below that and so on. Is there a formula that you use within excel (not a macro) that allows me to copy the C7 formula to C8 so that C8 will reference C130?
I have tried using INDIRECT and OFFSET formulas but cannot do it without an absolute reference to a fixed cell, which defeats the purpose, since I can go into C8 and manually change it to =C130, C9 to =C140 etc.
Currently using Excel 2007 at work and Mac Pro at home. Thought about R1C1 reference, but don't even know how to change to that style on my Mac.
Excel macro to retrieve some valid data from one sheet to another which has some values.
Description;- I have made an excel sheet for daily stock details which contains data like stock in, out, daily production for various products. I have made a menu which contains button of stock in, out and production, and one sheet for current stock where I enter In and out. I wand a macro when I click the button from the main menu it gives me all the production details taking from one sheet and past it in different sheet in the same workbook but it should not give the details of those products which does not have and production.
Version: Excel 2007 WinXP
I'm basically looking for something almost like an inverse function to INDIRECT. This function would first look at a cell's formula as a text string, parse out the first valid cell reference in A1 format, and return that cell as a text string.
Detail: I have a spreadsheet with cells that point to other values. I would like to get only the row number from the first cell reference in the formula residing in a given cell. For example:
Suppose A1 has the formula =AL267. and A2 has the formula =SUM(AL94:AL235)
I would like a formula in B1 that returns the text string, "AL267" so that I would know this is the first reference.
Ideally it could be dragged down to B2 such that it returns the text string "AL94" (and not "AL235") because AL94 is the first cell reference in A2's
Currently I am copying the formulas after hitting ctl+` and pasting that text into a text editor, followed by text operations to manipulate the results into the desired values. Any solution that didn't involve going out to notepad.
I have these cells:
http://img194.imageshack.us/img194/427/excelj.jpg
The two center cells are the average of the top, bottom, left, and right cells. Of course the two center cells will therefore reference each other.
I enabled iteration in Excel options but it will not calculate the answer. I am getting a #value error. I checked the cells, the equation is right and they are all numbers.
What am i doing wrong?
See the work book. I had to rewrite everything manually to get it to work (But I have a HUUUGE matrix and rewriting everything will take forever) Please look at the work book and tell me why one group of cells is returning answers and hte other is returning a #value error.
Never got this message before with the old excel so i dont know how to resolve. I get this. "Invalid Reference. File conversion can not contain formulas that reference cells beyond a worksheet size of 256 columns(columns IW or higher) or 65536 rows." Im doing a VLookup and when i input the table array it is always invalid when i know it is valid. The spreadsheet im referencing does not have any formulas beyond that range either. Another guy i work with is now getting the same error with the new excel.
View 9 Replies View RelatedI have created a macro in excel 2010 which enable the file to save (extract) data into separate location and name. The vba code for macro is as follows: Question: How can I save this workbook with reference to the value containing in cell B2? (it is named temporary now - as defined in the code)
Sub aaa()
'
' aaa Macro
'
[Code].....
I need to write a code to create visio flow diagram with excel inputs(Excel 2007). Attached is the requirement.
Requirement_Specification.docx
I created an add-in for Excel 2003 by following your site's instructions, substituting my own subroutine's name for "MyGreatMacro" (for the purposes on testing all it does is spit out a MsgBox). I then put the resulting xla file on a network drive and went through the standard process for installing an Addin :
Tools -> Addins -> Browse for the file and hit ok, check it off, etc
This works perfectly fine when i try to install on my own machine, but when I try on other user's machines I get an error message stating that the xla file is not a valid Addin. Excel's error message in this case is about as unhelpful as they come.
I have list of various web site and i want to keep only valid site . How it is possible ?
View 1 Replies View RelatedI try to add a named range and it says name not valid!! I'm putting in jan13. Why would this not be valid. There are no other named ranges in the workbook
View 4 Replies View RelatedI have a macro that creates a new sheet and names it based off a cell value (date, MM-DD-YY), and copies a 'Template' sheet to it, values only. Every so often, two sheets need to be made with the same date. I need the right direction in creating an addition to the below code that will add an A, B, or C at the end of the sheet name if the name is already taken?
View 13 Replies View Relatedi have a customer (im a computer tech, but excel is not my specialty) that has a weird problem with her most important file. She meant well, but tried to back up a 2.6 MB file to a floppy disk, and after it told her the disk was full, she was unable to open the file again in excel. (File Format Is Not Valid) It will, however, open in word, with the data there. Its in an unusable format, as there were 12 different worksheets (one for every month), all on the one page of MS Word. Better than nothing, but still will take weeks to reenter properly. I searched for a repair utility and had one that seemed to work, but only put a "0" in column A row 8. A far cry from what we are looking for. Ive also run a disk recovery program in the hopes of finding an older version of the file, but came up empty.
View 9 Replies View Related