I'm doing a data/filter/advanced filter/show all/unique records to get rid of any duplicate rows. I tried creating a macro and but the macro recorder doesn't know that I want to do NOT a regular paste, but a paste from the most recent entry from the Office Clipboard. Is there a formula and/or macro that will allow me to do this?
View 4 RepliesI created a macro that will do a subtotal and copy the value then undo the subtotal and delete all the values(i dont need the actual raw data, just need the subtotal). i noticed when i do a copy, i have to paste from the office clipboard. is there a macro i can use to paste from the first item on the list?
View 1 Replies View RelatedIf the user clicks the button to do the paste special macro twice - the second time they get an error (I am assuming that the clipboard has been wiped clean and they need to go back and copy the data again). The specific error message is: "Run-time error '1004': PasteSpecial method of Range class failed".
What I would like to do is add code to the pastespecial macro that looks to see if there is something to paste - if not, I want to give my own message and not the default one.
Is there a way to make Advance Filter show the most recent (highest row)unique entry instead of the first entry (lowest row)?
For instance if a spread sheet has
1 1
1 2
1 3
2 1
2 2
2 3
3 1
3 2
3 3
I want to keep the "1 3", "2 3", and "3 3" entry, not "1 1", "2 1", and "3 1".
a macro that will take my excel sheet (using office 2003) and then pasted it in outlook.
Also I need cell A1 and cell B1 pasted in the subject line.
I need a snipit of code that will paste the clipboard when the OK button on a message box (vbOkOnly) is pushed. I have in the past was able to make it stop if "Cancel" was selected, but one button seems to be harder for me.
View 2 Replies View RelatedI am using the following code in a template I have created for my department. I am copying a formula from the 7th row of the specified columns and want to copy and paste the row down to the "last row" which I have specified from an input box. I am trying to do this without using the clipboard, because some files are 50,000 lines or more and I want to speed this process up.
In the code where I have say Sheet4.Range("A8:I140000") I would like to use last row somehow like Sheet4.Range("A8:Lastrow")
Goal: I have data that was copied to my clipboard from the webpage source in a Chrome browser. I would like to get that data over to my excel worksheet and insert it starting at "A1".
Issue: All of the pasted data is ending up in ONLY cell "A1" when using VBA.
When I just click in cell "A1" and CTRL-V, the data gets spread across a lot of cells, which is what I am after.
Code:
'------------------------------------------
'Start The Process
'------------------------------------------
' Assigning clipboard data to string variable strClip
Dim MyData As DataObject
Dim strClip As String
Set MyData = New DataObject
MyData.GetFromClipboard
[Code] .....
I got a copy of Office 2007 and I am having some trouble running an Excel macro. It gives a 405 Error message. This macro runs fine on my Office 2003. Is there any extra setting that I need to do in the Excel 2007?
View 9 Replies View RelatedI'm trying to run a macro on my machine (Windows 2000 and Office 2003) and I keep getting an error on one method. Now I tried to run the same macro on a different machine (Windows XP and Office 2003) and it didn't error out.
Public strControlTitle As String
Public strControlTime As String
Public strControlUnit As String
Public intControlItem As Integer
Public intLastNameOnly As Integer
Public intDataType As Integer
Sub Main()
Dim strControlItem, strPageName, strValue, sigma, z95, z99 As String
Dim r, c, count, cmax, rmax, rt, ct, low, high, a, b As Integer
Dim lesscol As Integer
With ControlChartForm
.ComboBox1.AddItem ("Average Turn Around Time All Patients")....................
I have a VBA macro for automatically create a word report using data in Access and Excel. The macro is hosted within a Excel document but are using both Word-, Excel and Access objects/dataTtemplates for the creation.
The errors appears what it seems randomly. The macro iterates the same code a few times even in Office 365 but then it crashes. The most common error messages are:
Error 1:
Run-time error '-2147417851 (80010105)':
Automation error : The server threw an exception.
Error 2:
Run-time error '462':
The remote server machine does not exist or is unavailable
Error 3:
This action cannot be completed because the application () is busy. Choose Switch To to activate and correct the problem.
(no options are working, this hang the application)
If I debug usually the error originates from the code where I ether close the workbook template I'm using:
excelWorkbook.Close False
... or when I paste a chart from Excel to the Word report:
wordDocument.ActiveWindow.Selection.PasteSpecial
Even more strange are that sometimes if I continue to run the macro its all working again. This ONLY happens when the client office installation is O365. Office 2013 works just fine. I thought O365 and Office 2013 was fairly equal?
I used a form with textboxes for data input for one of my vb macros. Currently I have the private sub from the form transfer those entries to a remote cell on the spreadsheet, (like in column "HZ"), so that the macro that will actually utilize them can retrieve them. Is there a way to pass that data directly from what is entered in the form in the textboxes to the macro that will actually use them?
View 4 Replies View RelatedI'm trying to implement a very simple macro to paste a set of cells - already copied to the clipboard from a CSV file - into a worksheet.
Basically, all I need it to do is to allow the user to open that other CSV file, hit CTRL+A and CTRL+C, then go to the relevant sheet in my workbook and run the macro, which should simply paste the copied data into that sheet (starting at cell A30).
Here's what I have so far - I keep getting an error when the macro reaches the ActiveSheet.Paste command.
VB:
Sub UpdateData()
'
' UpdateData Macro
'
Dim strSheetName As String
[Code]....
I am trying to do is create an invoice log of payments received. For each payment there is a cell value of how many products the customer has which is updated on each payment entry. What I want to do is have a macro that runs when all other data is entered to update this value.
So I have a main customer sheet where it holds the product amount in the same workbook, let's call this cell $A$1 holding a value of 47. I go to enter a payment record on the invoice sheet, once this is complete the macro will run and look to $A$1 on the first sheet and update $B1 on my invoice sheet. On the next entry it will update $B2, then $B3 and so on.
I am using the close.workbook command in VBA to close a workbook I opened to copy data from. I am getting a message that says "You have a large amount of data on the clipboard. Do you want it available?" What command do I use in VBA say no to this message?
View 5 Replies View RelatedI have 4-5 worksheets (sheet1,sheet2,etc) on a workbook. All of the rows except for the ones that are filled in are currently HIDDEN.
I have one worksheet called "Add record" which has a VBA code that adds a record to any of these sheets.
When it does this I want it to recognise when pasting the new record into any fo the sheets.. IF the row is hidden, the sheet needs to reveal that row.
I'm desperate trying to get this to work!!
Here is the code I have so far! This is a command button macro used in the "Add Record Sheet" I have FOUR different versions of this code. Each one adds the data to a specific sheet.
[Code] .....
I have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
ive got my highly expensive office enterprise 2007 disk
what is the best way of installing this so i can still use 97 and 2007. any tips?
i wont bother with outlook but i'd like to try the rest ,mind you onenote,infopath and groove are a complete mystery!
how to change language of MS office.English language is not showing in options.Do I need to purchase language pack?I am using english language other than office.
View 1 Replies View RelatedI'm having a bit of an issue with OWC in 2007. I know they have been deprecated but I was under the impression, form many places including MS themself, that you could install them. I downloaded this file
http://www.microsoft.com/downloads/d...DisplayLang=en
and then the SP1 2007 file here
http://www.microsoft.com/downloads/d...displaylang=en
All seems to go well and there seems to be a appropriate .dll in c:Program FilesCommon FilesMicrosoft SharedWeb Components111033 by the name of OWCI11.DLL. However when I attempt to add a reference to that file in a VBA project in Excel (it's one that has an old broken reference to 2003 OWC) by browsing to that file it tells me
"Can't add a reference to the specified file"
What have I done wrong? Is what I am attempting, getting 2007 to use OWC, even possible? Note I did not write any of the code for this Excel Add-in so have very little idea about what OWC are for.
I have recently updated to Office 2007. I have about 50 forms with VBA in them (all excel) and I was careful to save them all back to 2003 office files. When one of my users opens the files and uses on of the internal userforms it errors out saying it is missing a reference.
View 9 Replies View RelatedI create a vb script file using SAS that will open excel and create pivot tables. It works in XP but not in office 97. I am not a vb expert. Here is the code.
Set XL = CreateObject("Excel.Application")
XL.Visible=True
XL.Workbooks.OpenText "D:JDTEMPXLWORKBOOK.TXT", 437, 1, 1, -4142, _
False, False, False, False, False, True, "|", _
array( _
array(1, 2), _
array(2, 2), _
array(3, 1), _
array(4, 1), _
array(5, 2), _
array(6, 2), _
array(7, 2), _
array(8, 2), _
array(9, 2) _ ............................
My organisation has ten small offices within a ten mile radius.
Most of the items to order are office supplies, along with order forms, catalogues, brochures and pro-formas.
Each office does not order the same items.
I would like to make a ‘generic’ supplies order in excel.
Column A = ‘in house’ code
Column B = Description
Columns C to G are size, colour, pack size etc.
Column H = quantity held
Column I = quantity required to hold
Column J = amount to re-order.
I would like Excel to calculate
Amount to bring stock to hold - “=I4-h4” (in J4)
If Current Stock is more than Stock to Hold then ‘0’ is in J4, “=IF(H4<I4, I14-H14,0)” (in J4) I think.
If H4 is left blank then J4 to show “0” or ‘Blank’. (experiments have given J4 a figure of 25)
I have tried putting two formulas together, but Excel tells me I have ‘too many arguments’.
I have a macro that does lots of cutting and pasting, and to make sure it can run without interference from my normal work, I did add the line Application.Interactive = False. But seems while I am cutting and pasting in other windows while the macro runs, sometimes it crashes on the paste part. Is the macro and the Windows Operating system sharing the clipboard?
FYI, Windows XP professional, Excel2000.
I have a workbook which tracks the current status of jobs and then records the changes on a separate worksheet in the workbook. Right now it is a time consuming process to enter the changes in the status log worksheet and then go enter them again in the change history worksheet.
I am wondering if there is a code that will allow the worksheet to automatically fill in an entry when something comes due. In my attached sample workbook on the 'status log' the Job number 372 in the CA # column is set up to be due today. We see in the 'what is due' column that corrective action is due.
I would like excel to automatically make an entry in the change history worksheet whenever a job becomes due. The change history worksheet has a highlighted row showing how the output would look ideally.
I know nothing about code or vba
Sample Workbook.xlsm
I have call data for a client and I want to know what calls came in after hours. I cant seem to get the formulas to work correctly.
It seems to run the weekday/weekend check correctly but the time is not working properly.
=IF(WEEKDAY(A2,2)>5,"Party",IF(AND(B2<=9,B2>=17),"Party","no Party"))
P.S. While writing this, I realized that it should be (<=9 OR >=17) or (>=9 AND <=17) but neither of those worked either.
party_noparty.xlsx
Im looking to make a formula that states if b3 =10 then a. if b3=12 then b, if b3= 14, then c, if b3=16 then d. A, B, C, D are referring to links to another sheet.
View 8 Replies View RelatedIn certain spreadsheets I have noticed a significant deterioration in save times. There may/may not have any formulas or macros on them and most are very small files 20-50kb. I notice that Excel puts a temporary file on the desktop while saving the original. The temp file goes away once the original is saved. While saving, I get the time icon which goes to beachball and it can take up to a minute to save the file. This happens on 2-3 Macs on network. Using 10.5
View 4 Replies View Related