We are having a sporadic issue throughout our company where when users attempt to open an ASP generated spreadsheet in Internet Explorer and then hit CTRL+A to copy all contents and attempt to paste into a regular Excel-launched spreadsheet (i.e. launching Excel independent of IE), the last two columns are not being copied. Further, when attempting to just copy the two columns, themselves, only the first is copied, and when attempting to copy one cell each in the two columns (that are in the same row), only the first cell is copied. Additionally, when examining the clipboard in this instance, only the first cell is being copied to the clipboard, so for some reason attempting to copy it out of the Excel spreadsheet that opens in IE is when the issue occurs (vs. having the issue occur when you are trying to copy into the new Excel spreadsheet from the clipboard).
the if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox. the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0) If Not IsError(res) Then
I get this monthly report that has 5 tabs in it. The last tab, ALL_FAILURES_1mon, is a list of part and serial numbers that have failed that month. From that tab I copy the information into a master workbook that houses all the failures broken up by part number, each part number is a separate tab. I am wondering if there is a way to search in the "Monthly_Report" document for all rows containing the part number, 07X-000-ZZZ" and copy the entire row into the master fails list. I have attached a couple examples with sensitive information blocked out.
What I need is for when the macro is run, it will search "Monthly_Report.xlsx" ALL_FAILURES_1mon tab, for "07X-000-ZZZ" and copy all rows containing the part number and paste them in the next blank row of "Master_Fails_List" in appropriate tab.
*NOTE*I have attached both examples however my "Monthly_Report" document was too large so I had to upload it as a .xlsb but the original is .xlsx
I have noticed that the basic problem I have is a common one on this forum with different varibles for different people. I have attached a dummy copy of the spreadsheet that I am using.
I need to copy cell information for one spreadsheet to one of 2 other spreadsheets depending on a dropbox condition. The master spreadsheet is the Issues spreadsheet, and depending on whether the user chooses Transferred Complaints or Transferred Offences (in Column K) I need to transfer certain cells to the Complaints or Offences spreadsheets.
The information I need to transfer from Issues is: .....
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
I need to bring in a row from another excel sheet then run a calcuation and save that value in a cell then pull the next row from the other excel sheet and run the calc again and so forth till there is no value in the row of the excel sheet I am pulling from. I would like this to happen if you click a button.
I’m creating a spreadsheet to control corrective actions. Each corrective action will have a date that it needs to be completed by. When the completion date plus one day is passed, I need the cell that the completion date is in, to turn a specific colour and a warning mail to be sent via outlook When a further six days have passed I need the cell to turn a different colour again and another email is sent
Ive generated the following code to call an Outlook subroutine if the correct conditions are met. The subroutine runs ok but I can get the sheet code to run.
Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Range("A1"), Target) Is Nothing Then If IsDate(Target.Value) And Now() = Target.Value + 1 Then Target.Interior.ColorIndex = 3 Call Mail_with_outlook ElseIf IsDate(Target.Value) And Now() = Target.Value + 6 Then Target.Interior.ColorIndex = 5 Call Mail_with_outlook
I have two spreadsheets, call them Sheet 1 and Sheet 2. Each sheet has 3 relevant columns of information I need to compare, we will just say they are in columns A (A list of items),B and C (both are the data that needs to be compared).
What I need to do is find a way to match the number from column A on sheet 2 to its location on sheet 1 and copy the information from the 2 other cells associated with it into columns D and E on sheet 1 in the row where that item appears.
For example: Item #5(found in column A) is located in row 7 on sheet 1 and row 3 on sheet 2. I would need to copy from sheet 2 B3 and C3 to sheet 1 into D7 and E7.
Manually searching and copy and paste would be very time consuming since each sheet contains 8000-10000 rows.
What I’m trying to do is create a Workbook that works within a folder that pulls data from other Workbooks within the same folder.
Example: Workbook name “RATES.XLS” would be the name of the main Workbook with all the information. I would like to be able to pull certain cells from the other Workbooks as they arrive in the folder over to the Rates Workbook. Every day, two new Workbooks show up in the same folder with a name like “1Name9_MMDDYYYY” and “2Name1_MMDDYYYY”. So the only thing different everyday is the date added to the name of the file and ofcourse the information is different, but formated the same and in the same cells.
Once I get the information from the other sheets linked, I will need to figure out a way to capture the date on the same line and move the data down the sheet within the Rates.xls workbook.
I am trying to copy data from one spreadsheet to another but am having trouble with the VBA code. I am new to doing this so have looked online and tried to find the code to do it. I have come up with the code below but it keeps failing at the While section.
Sub Starters_Click()
Dim Counter As Long Dim LSearchRow As Integer Dim LCopyToRow As Integer Dim Source As Workbook Dim Dest As Workbook Dim OriginalWorkBook As Workbook Set OriginalWorkBook = ThisWorkbook Const MyDir As String = "C:Documents and SettingsAdministratorDesktop"
On Error GoTo Err_Execute
Application.ScreenUpdating = False
For Counter = 1 To 100
Set Source = Workbooks.Open(MyDir & "HRTest" & Counter & ".xls")..............
I just want to know how do you copy details from a userform (Im doing patient details such as Name, address etc) in the spreadsheet. I have got an OK button I think a VBA code needs to be used that will tell the from to copy the details in an empty row. My user form currently overwrites the original row and is annoying!
I'm trying to sort some data that is generated from a PDF. When I copy the PDF into Excel all of the data is placed into one cell. Is there a function or formula I can use in VBA or within the spreadsheet to accomplish this?
For example, the cell may contain "Employee John Employee Steve Employee Dave Employee Jed Employee Mark" in cell A1. I want the function to list John, Steve, Dave, Jed and Mark in separate cells. So I need to get rid of the space bar hits, the word employee and to separate the names to different cells.
A1 currently is "Employee John Employee Steve Employee Dave Employee Jed Employee Mark"
I wish to create a new sheet/workbook which promts the user to enter a start number and an end number. I want to then display 20% of randomly picked numbers between the start and end figures.
For example, the user enters 1 as a start and 20 as an end figure. 20% of this is 4, hence I want the system to randomly return 4 numbers between 1 and 20.
I have the following code that will look through an individual worksheet, if the value in column D is equal to 5 and the value in cells E6:L1000 is "a" then it should generate an email. The problem I am having is that it generates 8 emails, one for each column. What did I do wrong in the code? It should only generate one email for the cell which has the "a"
Sub Test() Dim OutApp As Outlook.Application Dim OutMail As Outlook.MailItem Dim cell As Range Dim wsWH As Worksheet Dim lngMax As Long Dim intFiveDays As Integer Application. ScreenUpdating = False Set OutApp = CreateObject("Outlook.Application") On Error Goto cleanup Set wsWH = Worksheets("WH") lngMax = wsWH.Range("A65536").End(xlUp).Row For intFiveDays = 6 To lngMax...................
I am have some code that takes values from a range (sourceAll) defined on my worksheet as:
Set sourceAll = Workbooks(pathnm).Worksheets(m).Range("A1", "S34")
I'd now like to be able for the range to be generated dynamicaly, but my problem is that the far right column (S) does not always have a value for every entry. Is there a way of using a column that does have a value for every entry, say column B, but then extending the range accross to S? If possible I'd like to avaoid having to move one of the columns with values for every entry. Auto Merged Post;I was looking at some of the suggested threads and found some code that I worked into my own
Set countRow = Workbooks(pathnm).Worksheets(m).Range("B1250").End(xlUp) Set sourceAll = Workbooks(pathnm).Worksheets(m).Range("A1", countRow) sourceAll = sourceAll.Resize(sourceAll.Rows.Count, sourceAll.Columns.Count + 17)
now this seems to work mostly, but it has deleted everything that was in column B.
I am currently trying to run a macro that will take all of the values from one column in a workbook, copy and paste them in another sheet in the workbook. The data may vary in size and the macro must run until the preceding columns value (on the same row) is empty, which will signify that there are no more values to copy. Also this data may duplicate, which in this case I would only like to paste unique values.
I'm downloading a tone of financial data from a database and without fail there are always a few odd numbers over time that are either wrong or that I want to through out of my charts/analysis. But I don't want to change them directly in the sheet that I use the code to download straight from the database since I can just click update and the codes refresh the latest data into the format I need. Basically once I hit refresh and download the data into the coded worksheet template I want a macro that lets me pick a tab or multiple tabs and copy and past special value the data into a new worksheet where I can manipulate the data without screwing up the code.
Worksheet (Daily Sales) - daily input, copy to the worksheet (Weekly Sales), Monday through Saturday. The ranges copied are not consecutive. I am using If...then...else.
This is a followup to a post I had marked as solved, and it's really not. Below are two different Email routines I've tried, both based on macros by Ron DeBruin, neither of which fully satisfy my need.
One routine creates a copy of a spreadsheet and mails it. The problem with that is that my source spreadsheet has cells containing 255 characters or more, and Excel truncates the cells after 255 characters, so all of the data isn't going into the new spreadsheet.
The other creates a new spreadsheet, copies the data from my old spreadsheet, and pastes it into the new spreadsheet. Problem with that is the new spreadsheet doesn't have my footer or headers and isn't formatted to print correctly.
I need to either find a way to get past the 255 problem, or find a way to copy a properly set up spreadsheet and paste my data into it. My code is below: This one copies the spreadsheet and mails it
I have created with most of it being done by Austrada (who has done a great job) code to copy multiple spreadsheets into 1 spreadsheet. We have run into a error Run Time Error '9'. Subscript out of range.
Sub CopyData()
'----------------------------------INFORMATION---------------------------------------- 'You need to make sure you have activated the Scripting Runtime reference for the FSO to work '-------------------------------------------------------------------------------------- Dim fso As New Scripting.FileSystemObject
I have a list of names in column "A" worksheet1. I need to copy the name from "A1" sheet1 to "A10" on sheet2 Then print a range called "Document" from sheet2 Then get the next name "A2" sheet1 etc. down Until it reaches a " " in column "A" sheet1
I have a file here that already has macros in it. The file is basically a excel document generator. When you click create sku, the document will generate multiple documents based on the user inputs.
1) In the generated documents the original "generator" file creates, I need generated files to have column B and D formatted to TEXT, currently all the generated files are formatted to general. (This code is in module 1, line 84 col 34.)
2) The other problem is I need to append the value in Cell N1 in the "sku data entry" sheet to be appended to the generated file names. (this part of the code is is in module 1, line 150 col 28.)
I was unable to attach my file to this thread because it was to big. however I copied the module where I think the code is causing problems:
Sub procData() ' Starting point for read/extract process Cells(4, 6).Select ' Range = F4 (row 4, col 6) For x = 6 To 52 Step 2 ' col F to col AZ
Prior to Excel 2007, the functions provided by the Analysis Tool Pack (ATP) are provided by a separate add-in. You cannot call them using the methods shown above. First, you must load the Analysis Tool Pack - VBA add-in. Note that this is different from the Analysis Tool Pack item. Once this add-in is loaded, go to VBA, open your project, and choose References from the Tools menu. In that dialog, choose atpvbaen.xls in the list of references. Once you have that reference in place in your VBA code, you can call the functions in the ATP as if they were native VBA functions.
I have thousand rows of data in the following format:
Despatched Time Batch Date Time Amended Time
20/4/2013 3:45:00 1 20/4/2013 03:45
[Code] ..........
'Date' is generated by =IF(A2="", "", TRUNC(A2)) 'Time' is generated by =IF(A2="", "", IF(E2 = "", A2 - TRUNC(A2), TIME(LEFT(E2,LEN(E2)-2),RIGHT(E2,2),0)))
And sometimes I may want to change the Time, so I used another column 'Amended Time' to insert a 4-digit value to do so.
I want to arrange them into batches according to the hh:mm, so for the column 'Batch', I used the following formula: =IF(D2 = "", "", IF(EXACT(D2, D1),MAX(B$1:B1),MAX(B$1:B1)+1))
The problem is, when I changed the time by inserting 4 digits in 'Amended Time', the time value is actually different from those generated by TRUNC(), so even two cells have the same time '03:46', the time value is not exactly the same and so they are arranged into different batches (please refer to the following table).
I have written the VBA code to color any figure above 15, but it display rows above 15 as red including other rows.
Below is the VBA code
Code: Sub FillCells()Dim lRow As Long, lColumn As Long 'Using Cells property to refer to range 'Loop through rows For lRow = 1 To 10 'Loop through columns For lColumn = 1 To 5
[code].....
Which shows the output as Workbook1.jpg But my query is how to get only rows above 15 with red color
how to use the random number generator to generate unique numbers (1-55) based on the odd percentages in the attached chart.
for example in the chart, chances 1 through 10 are more likely to be generate first rather then the last chance number 55 based on the draft pick odds....
