Copy Values From One Spreadsheet And Transfer To Another?
Aug 31, 2012
I am currently trying to run a macro that will take all of the values from one column in a workbook, copy and paste them in another sheet in the workbook. The data may vary in size and the macro must run until the preceding columns value (on the same row) is empty, which will signify that there are no more values to copy. Also this data may duplicate, which in this case I would only like to paste unique values.
View 1 Replies
ADVERTISEMENT
Jan 20, 2010
In a proceedure I'm trying to copy some ranges including: text,cellcolor and borders to a number of different places. What I've got from modifying the macro recorder was
View 2 Replies
View Related
Jun 20, 2014
I'm downloading a tone of financial data from a database and without fail there are always a few odd numbers over time that are either wrong or that I want to through out of my charts/analysis. But I don't want to change them directly in the sheet that I use the code to download straight from the database since I can just click update and the codes refresh the latest data into the format I need. Basically once I hit refresh and download the data into the coded worksheet template I want a macro that lets me pick a tab or multiple tabs and copy and past special value the data into a new worksheet where I can manipulate the data without screwing up the code.
View 3 Replies
View Related
Feb 15, 2009
From the attached spreadsheet I need to transfer all the rows where the issue status in column T is either ongoing or open. Now I know how to transfer them over if row 1,2,3 etc was going into row 1,2,3 etc into the new spreadsheet but as not all rows from this sheet is going over I need to now how to transfer data so in the new spreadsheet it just follows down rather than have spaces in it. i.e. if on this sheet I need to transfer data from rows 1, 5, 10, 15 on the new one they go into row 1,2,3,etc
View 7 Replies
View Related
Mar 11, 2014
I am setting up a few spreadsheets for a restaurant I work at and I am stuck on an excel matter. I am trying to have an ordered number transfer to a new spreadsheet that will apply that ordered amount to a monetary value. So all my cooks would do is put the prep list on dropbox and it would take the ordered amount by the recipe cost to get an invoice for that day.
Example:
1st Sheet 2nd Sheet 3rd Sheet
Prep List: Recipe Costings: Daily Invoice:
Sausage - 2 x Batch Sausage - $229.03 $458.06
Pesto - 3 x Batch Pesto - $74.04 $222.12
View 3 Replies
View Related
Jan 16, 2012
I have a spreadsheet called DATA1 that has code in 3 cells B2, D2, F2.
I want a peace of code that will allow me to transfer this data when I click a macro button (Lets call the button "transfer") to another spreadsheet call SALES1.
to do this it has to open the cell and place the data in the same cells on sheet1 of sales
View 8 Replies
View Related
Jun 28, 2012
I am trying to transfer data from two different spreadsheets where their data has common column titles and then transfer it to a Master spreadsheet. These two spreadsheets will have different filenames most of the time. If the first spreadsheet has a new data, then it needs to be transferred to master spreadsheet and when the other shpreadsheet has a new data, it will be added to the mast template as well. The problem is those two spreadsheets always change their filenames. How can I have a macro that will rely on the columns instead where data resides and transfer it to master template?
What I am trying to achieve is like two buckets with water (two spreadsheets wth some common columns) and their water will be transferred to a big water drum (master spreadsheet). For now, what I'm doing is always copy and paste data to the master spreadsheet and it takes me forever to do it one by one.
I don't know if I can attach my spreadsheets here so I only put the link for pictures [URL] ........
This is what I have:
Sub UpdateFromTable1And2()
Dim sFileName(1 To 2) As String ' List of file names
Dim nFile As Long ' Index for file name list
Dim wb As Workbook ' Opened workbook
Dim ws As Worksheet ' Worksheets("Combined") in this workbook
[Code] ..........
View 9 Replies
View Related
Jul 25, 2014
I'm transferring data from a PDF to Excel (the PDF link will be at the bottom of this post). Specifically, I need to get addresses from this document, so, three lines of text into four different cells. I don't need to include the state, but I do need to separate city and zipcode; see below for example.
The PDF is set up as a table, but when copying full pages of it into Excel, everything goes to one column. To complicate things further, the pages do not all follow an identical pattern.
Right now, I'm just manually copying and pasting each cell, but I trust the Excel gods (or demons) that there must be a more efficient way to do this.
This is the link to the PDF document: [URL]...
To give an example of what I'm doing, the first row of my spreadsheet reads as follows: Kroger Limited Partnership I d/b/a Kroger, 1617 Delaware Ave, Mccomb, 39648 (commas represent cell separation).
View 2 Replies
View Related
Mar 12, 2008
Im trying to use the transferspreadsheet method to load some data in an access table, but using my current code, it gives me an error, saying that the file is already opened by another user, or that i need permission to view it.
that it is open, is true, since I'm loading from that spreadsheet.
this is the code I have now:
Sub LoadSheet()
Dim accappl As Access.Application
Dim strpathdb As String
Dim strpathxls As String
Dim myrange As Range
Set myrange = Range("a32").CurrentRegion
'path van de database
strpathdb = "X:credepSTRAT_PLANStratPlan.mdb"
'path van de upload file
strpathxls = ActiveWorkbook.FullName
Set accappl = New Access.Application
accappl.OpenCurrentDatabase strpathdb
DoCmd.TransferSpreadsheet acImport, 3, "Tbl_Growth_Metric", strpathxls, False, "myrange"
View 9 Replies
View Related
Aug 5, 2009
I'm trying to transfer information I have held in a table format into a database format.
I'm using array variables to hold the table data and now I'm trying to use this data held within the array to produce a database.
For example:
A 1 2
B 2 3
C 3 4
into
A1
A2
B2
B3
C3
C4
My code would look like this:
View 9 Replies
View Related
Feb 20, 2014
I'm trying to copy the cells from a sheet and transfer only the values to other sheet.
I did it via code and it worked fine, except for the dates. In the new sheet the months and days are swapped.
The original date is composed via the concatenate function, since it gets inputs (day, month and year) from the user in different cells. It's in the format D/M/YYYY (examples: 4/2/2014, 10/12/2013). I believe the excel interprets it as Text, even if I formated the cells to Date.
I think it may have something to do with the default format in different countries. Here in Brazil we use DD/MM/YYYY, but my Excel is in english and in US the format is MM/DD/YYYY, am I right?
View 2 Replies
View Related
Mar 13, 2013
I want a Macro that I would like to assign it to Control Button on Spreadsheet 1. When the user clicks on this Button only "Selected data" i.e. Cells A3, B4, C5, E5 will be transferred to Spreadsheet 2. The data transferred into Spreadsheet 2 should be inserted in the first available row and hence not override other data. Also, I have a question, both files will be sitting on the same shared network path however,for the update to happen to we need to have both files opened at the same time? If yes can we design something to update Spreadsheet 2 without having it opened?
View 2 Replies
View Related
Mar 18, 2014
I would like to set up a maintenance register where I would have:
worksheet 1 - a page where staff can choose a location and choose a maintenance issue and hit submit
worksheet 2 - after they have hit submit the detail will appear in designated cells in worksheet 2 (a ledger of maintenance issues). so each submit should send the info to a new line in worksheet 2.
I have a basic knowledge of Excel and have used formulas and functions before but not VBA/Macros. Any step by step through setting up the submit button and macro correctly?
I've tried to do Worksheet("Register").Range("A2").Value = Worksheet("Request").Range("A1") after installing a push button but all I get is errors.
View 5 Replies
View Related
Nov 25, 2008
I have a spreadsheet that I have variable data in and I want to transfer specific parts of the workbook into a Word doc.
Not a problem with the Excel part, I can select each and every cell that I want, copy them and then...
Recording a macro hasn't done the trick as the code I have only copies and doesn't paste. I know I can edit the code to open Word but the problem is that when in Word, the data needs to go to very specific places, some of it goes in the header, most goes in the main body, I can't see how this could be done as there are no cell refs as in Excel!
is it possible to paste to say halfway in a sentence, in a macro?
View 9 Replies
View Related
Jan 13, 2010
I have noticed that the basic problem I have is a common one on this forum with different varibles for different people. I have attached a dummy copy of the spreadsheet that I am using.
I need to copy cell information for one spreadsheet to one of 2 other spreadsheets depending on a dropbox condition. The master spreadsheet is the Issues spreadsheet, and depending on whether the user chooses Transferred Complaints or Transferred Offences (in Column K) I need to transfer certain cells to the Complaints or Offences spreadsheets.
The information I need to transfer from Issues is: .....
View 13 Replies
View Related
Jan 24, 2009
If i have a basic formula that reads a6=(a2*a3*a4)/a5
i need a5 to be entered as one value but be equal to another. Such as 12=6530 and 10=10380 ...
View 10 Replies
View Related
Jun 24, 2013
I am trying to transfer a set of values from a column on sheet1 into cells on sheet2. Sheet2 contains labels I made up so the cells I want the values transferred to are not in column format. Is there a way to write a formula so that it will transfer the values indirectly? By indirectly I mean that I want sheet1 a1 to go to sheet2 a1 then I want sheet1 a2 to go to sheet2 a32.
View 5 Replies
View Related
Dec 16, 2008
I have some values in Range F2, F26 ,F48 and so on.
I need to transfer these values using a macro to
C8776
C8777
C8778 and so on.
Since there are a lot values , I would like to have a macro for this operation;
View 5 Replies
View Related
Jul 3, 2014
I have a Userform1 that is launched on a Before_DoubleClick Event. This UserForm1 has a CommandButton1 on it. When CommandButton1 is clicked I would like for it to transfer information into "MySheet" based on the current Cell address. I have the below code but it is not working correctly(The red parts are where I am having difficulty). Here is the Worksheet Before:
Worksheet Click Event is Initialized Assume Active Cell is A2:
Excel 2012
A
B
C
1
BatchDate
BatchNumber
Initials
[Code] ....
MySheetThe data above this instance will be contiguous for Example:
Excel 2012
A
B
C
1
BatchDate
BatchNumber
ID Number
[Code] ......
MySheet
Sheet to Paste Data After Procedure:
Excel 2012
A
B
C
1
BatchDate
BatchNumber
ID Number
[Code] ..
MySheet
Code:
Private Sub CommandButton1_Click()
Dim LastRow As Long
Dim BatchDate As Range
Dim BatchNumber As Range
BatchDate = Range(Selection.Address).Value
[Code] ......
View 4 Replies
View Related
Mar 12, 2009
why the last line below errors when the line before doesn't?
Error 1004 Method ' Range' of object '_Worksheet' failed
Sub tester
Dim wbThis As Workbook
Dim wsSrce As Worksheet
Dim wsDest As Worksheet
Dim lastSrceRow As Double
Dim lastDestRow As Double
Set wbThis = ActiveWorkbook
Set wsDest = Workbooks(wbThis.Name).Sheets("Detination")
Set wsTmpl = Workbooks(wbThis.Name).Sheets("Source")
I've been through countless threads, specified xlapp.... etc.
View 4 Replies
View Related
Dec 19, 2007
I have two workbooks with the same sheet names.
One workbook is called "Main" and the other is called "Subset".
Column D in each sheet is mostly identical between the two workbooks and contains the LOOKUP references.
I would need a macro (called from the "Main" workbook) which allows the user to browse for the "Subset" workbook.
Once selected, the macro should cycle through all sheets of the "Subset" workbook and for column D values LOOK them UP in "Main" workbook and transfer the adjacent values from column C of the "Subset" workbook to column C of the "Main" workbook.
Appropriate error handlers need to be in place for:
- Selecting the appropriate workbook (i.e. one which contains identical sheet names)
- The "Main" workbook is likely to contain additional sheets which should be ignored by the macro
- Column D LOOKUP entries which are not found in the "Main" workbooki should be ignored (and vice-versa)
View 9 Replies
View Related
May 23, 2014
I have Information found on Sheet 1. I need the program to take the value found in Column B and try to find matches found on Sheet 2 in Column B. Here's the thing it is only going to take the first 3 characters found in the Cell on Sheet 1. But in sheet 2 it will need to pull all information that matches those 3 characters. I included a sheet on what the finished product should look like for two of the sheets. If the program finds a match it will transfer the original and the copied match to a sheet Named "Name". The correct format can be found on "Finished Sheet Name". If no matches are found it will place the original information from Sheet 1 onto a sheet called "New".
Test2.xlsm
View 5 Replies
View Related
Jan 9, 2007
I am using a calendar control 11 in a user form. I would like to create a combobox on a user form that when you click the drop down button it opens the calender then the user can select a date which is then returned to the combobox. I beleive the way to do this is to trap the dropbuttonclick event. Tho it dosent seem to work.
Private Sub ComboBox2_DropButtonClick()
Calender.Show
ComboBox2.Value = Calender.Calendar1.Value
End Sub
View 5 Replies
View Related
Aug 22, 2007
I have a report where, month in month out, i have to append columns on the right, to give a Year to date figure. Now there are many rows with different numbers but one of the columns is call [NOTES]. This is where the user can provide commentry on the weekly figures.
Now whats getting annoying is i have to copy this commentry and then create a comments box then paste the text in there and finally, hide the comment.
So what i want to be able to do is be able to Copy the cell, then, have a right click menu button saying "Paste As Comment", so it paste the selected cells contents into a comment and hides it.
View 9 Replies
View Related
Jan 13, 2010
6 worksheets ("Monday" ,"Tuesday" etc)
1 Worksheet (call it Main)
In the Main sheet let's say there are 3 column headings - Date, Inv No, Amount
I want to copy from the Main sheet to the appropriate day e.g if the dates in the main are13/01/10 and 14/01/10 then all the info pertaining to 13/01/10 should go to the Wednesday worksheet.
View 12 Replies
View Related
Oct 9, 2012
I have a large data ... my problem is that I want the data is segregated automatically without manual filtering. in my data there are approximately 1000 individual name data, i need information about one person automatically segregated in one worksheet
A
B
C
D
[Code]....
for example; in the table we can see the red colour font in column D, that is the name person, what i want is data for one person automatically transfer to another sheet..example : Annamalai data to Sheet2, Koh Che Kuan to Sheet 3, Rashidah to Sheet 4..etc
View 3 Replies
View Related
Mar 27, 2013
I wanted to separate my cell values with comma into a column
Item
DepIDs
No
IDA
1
2000
1
2000
[Code]...
the output will be below table,
Item
IDA
DepIDs
1
2000
2000
[Code]...
View 2 Replies
View Related
May 22, 2007
I have a main workbook that is meant to summarize data from other workbooks
In Row 6 from column H on I have workbook names in each cell
Column G in all workbooks (including the main one) contains our branch #'s for our offices
For each workbook listed in row 6 , I need to open that workbook (I have that setup with the code below---notice there is an AX.xls that is appended to the file names listed in row 6 in order for the names to match what is in the windows directory)
In the newly opened workbook, I need to, for each value in column G, copy the value from adjacent cell in column H (the dollar value) then search column G of the main workbook for a matching branch and paste the value to the appropriate row under the workbook name column (remember workbook names are in row 6)
The trouble is, for each branch in column G in the newly opened workbook that cannot be found in the main workbook, I need to paste the new branch # at the bottom row of/in column G and the $ value (H column value from the newly opened workbook) to the corresponding row under the workbook name column
Sub OpenWBs()
Dim Rng As Range
Dim WB As Workbook
Dim MyPath As String
Dim lastCol As Integer
Dim newRange As Range
lastCol = Cells(6, Columns.Count).End(xlToLeft).Column
Set newRange = Range(Cells(6, 1), Cells(6, lastCol))
MyPath = "F:AccountingAPAdvertising AccountsLA TimesAgentExtractorCompletedLIST"
For Each Rng In newRange '
View 9 Replies
View Related
Jun 26, 2009
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
View 3 Replies
View Related
Sep 16, 2006
I need to bring in a row from another excel sheet then run a calcuation and save that value in a cell then pull the next row from the other excel sheet and run the calc again and so forth till there is no value in the row of the excel sheet I am pulling from. I would like this to happen if you click a button.
View 2 Replies
View Related
