Find All Ranges In Worksheet And Copy Actual Cell Range To A List?
Mar 14, 2013
I have 10 worksheets. I would like to create a macro to find all the "2" values on worksheet 1, and have the actual range that the cell is, compiled into a list -example: I would like the list to be similar to this= (A1,B15 ,C8)
I even tried to record it but it doesnt show me the actual range that the data is found in.
I looking for a macro to look in a list in worksheet "Map_Ref", and take the Range Name of column "A" and copy that range in the corresponding Tab and range as specified in Columns "C" and "D" (i,e. take range name "BB Staff Counts_Tenured" from cell "A2" and copy that range in worksheet "Sheet2" (as specified in cell C2), range "A2" (as specified in cell D2). And so on.
List of worksheet "Map_Ref":
Column AColumn BColumn CColumn DTable/Range Title/Name: Range in Tab "CMD_1"Copy to Tab:To Range:BB_Staff_Counts_TenuredA126..Q156Sheet2A2Branch_Counts_BBmarketsA35.. C47Sheet2A59Branch_Counts_Chase_SBRM_RegA30..E33
i have this file with macro. But it doesnt works how i want. I need all data exctly in forms as are. So it can not will be changed. I hope it will be works, if i define my macro other.
I find actual day in column C where are dates. But now it find only if is there value like now(). In this file it found cell D24, but i need, that it will find cell C24. I need search only actual day in column C.
Hopefully someone can help me and understand what I am trying to do. I'm almost finished my project and stuck on one last part! If I have missed a similiar example on the forum could someone point me to it
I have a list of Lines (a,b...) which start at point i and end at point j. Line i j Point x y a 1 2 1 6 10 b 2 3 2 7 4 3 2 3
I have have a seperate list of the points. Each i point and j point have x and y coordinates. I want to find the i point value in my list of points and copy the following two columns (the x and y values) to Sheet2. On sheet2 I want to paste the i values in row 1 and the j values in row 2, skip two lines and move onto Line b.
VB: Private Sub Worksheet_change(ByVal Target As Range) Dim KeyCells As Range Set KeyCells = Range("K:K") If Not Application.Intersect(KeyCells, Range(Target.Address)) Is Nothing Then If ActiveCell.Value = ActiveCell.Offset(0, -6).Value Then ActiveCell.Offset(0, 1).Value = ((ActiveCell.Offset(0, -4).Value) * (ActiveCell.Offset(0, -5).Value) End If End Sub
Now I would like to add another code: When I will change value in actual cell (sheet1) then copy value from cell A1 (sheet1) to the first free cell in column A (sheet2). I still have problem with error that I am out of range if I tried to copy it to sheet2.
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Someone created a macro for me that creates and names worksheets based off of a list on my first worksheet "Summary". I would love to be able to then have the list of titles on Summary sheet be in cell A1 on each of the worksheets that I had created.
Here is the macro for creating all of the worksheets w/ names -
I have a workbook that has 31 sheets representing the days in a month. Each sheet is identical to each other. The naming convention for each sheet is as follows...(1,2,3,...31). The very last sheet is named "Summary". On this sheet I have in column A the dates from the beginning of the month dragged down to the last day of the month in this format xx/xx/xx. To the right I have it equal to a particular cell (M33) corresponding to the date. So for 04/01/2012, the value in the cell to the right is (='1'!M33). Instead of repeating the process of "=" the click the next tab and get M33 on that tab....is there a faster way of doing this where I can enter a formula and drag it down pulling all the "M33" from each sheet?
I have small problem to solve and I can't find out how: I have to find cells in a range (L4:L20) with value PM and copy range with two next cells to cell F4 (not a cell with "PM") If in range("L4:L20") cells = PM then copy range with next 2 cells to ("F4"). See attached worksheet.
(I am using Excel version 14.0.7106 and MS Office Professional 2010.)
I have a macro in which I have named a range of numbers in a spreadsheet, used the "find" function to find a particular number in that range, and now would like to copy some information into a cell in the same row as the found number. However, when I try to move over to the cell that I'm copying to, it only goes to the 1st row in the range that I have defined.
Here's the portion of code I think you need to see. Everything works...it finds a match...but then I don't know what to do from there to get the information to the correct row:
'Grab the 1st project number Range("C8").Select Do Until ActiveCell.Value = "" If ActiveCell.Value "" Then prjnum = ActiveCell.Value Selection.Offset(0, 8).Select
we have two workbooks which do change daily. one with 'data' sheet containing 40,000+ rows of data in coloumn 'B' another with 'cust' sheet with 10,000+ rows of data in coloumn 'C' as a part of daily work we have to compare last part of the each cell in Cust sheet with data sheet
1. last 6 digits are compared and the results copied to 'cust' sheet from 'D' column and so on adjacent to the corresponding data. 2. last 5 digits are compared and the results copied to 'cust' sheet from end of the aforesaid result (1) 3. last 4 digits are compared and the results copied to 'cust' sheet from end of the aforesaid result (2) 4. any duplicate within the row to be deleted from left to right
as the data are enormous the work can be completed only 10 - 15 % manually.
Ok What I want to do is copy the info in Cells A1:N55 into cells A63 onwards, now this I have completed so far with the following code, but what I also want to do is copy any changes that are made in cells A1:N55 from when this copy function is run into cells A63:N118. Does anyone know of any way I could go about doing this?
Dim wSheet As Worksheet, strWS As String
For Each wSheet In ActiveWorkbook.Sheets strWS = Left(wSheet.Name, 2) Select Case strWS Case Is = "AJ", "CJ", "PJ" .......................
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
I am looking for a formula function or a vba code where:
- In workbook1 find the first cell that is empty between range A7 - A10, - In workbook2, in Range G10- G13: find the word "Day1". - If the word "Day1" exists in cells G10 or G11 or G12 or G13, copy the particular cell or cells where "Day1" exists to the first found empty cell or cells in range A7-A10 in workbook1.
Lets suppose cells A8, A9, A10(workbook1) are empty cells, that means A8 is the first empty cell. And G10,G11,G12, G13 (workbook2) have the word "Day1" Then, Copy cell G10 into cell A8 Copy cell G11 into cell A9 Copy cell G12 into cell A10
Here's what I'm trying to do (improperly apparently!!):
Book1, ''Master'' is the sheet, I'm copying info into, and Company info are the sheets im getting info from each of my .xls files in a folder, ie cell C2. Just in case, to be clear, I have all my vba projects opened from each .xls book, and need to copy, from each .xls book, in Company info, cell C2 into Master column A:
Sub collate_cell_data() Dim dest As Range, wbNew As Workbook, wb
I have an worksheet that I import a csv into, each day a new csv is added to the bottom of the previous csv data. I have some code that extracts the date and month # from the cell and places them in helper columns. The code find the last used cell in the helper column and the imported data column to find the first and last row of the new day.
This part works fine. However, I assigned a variable name to the first and last variables and would like to uses these row number to define a range in order to use the range for a vlookup or find operation. This is where I get stuck. I want to use column x and row (variable from first bit of code) to column y and row (variable from first bit of code). Then use a vlookup/find whatever works to find the text I need and get the data. Tips on looping the code would be welcome as well.
I have searched for answers to the problem, on the board and web, but have not found a solution that works for me. (at least that I could get to work!!)
Below is the code as I have it
Public Sub Enter_Date()
Dim DateA As Date Dim DateB As Date Dim Cnt As Integer Dim End_of, Beg_of As Integer Dim Count As Integer Dim NumtoFill As Integer
I am working on a spreadsheet for my farm. I have two sets of data I am working with. A very basic example is below:
What I am trying to do is find the actual median stud fee (i.e. if you had another column with $5000 listed 22 times, $6500 listed 34 times, etc. then you could find the median from there). Seems like an easy thing, but I'm not sure if an array formula is what I need to use or something simpler. I don't have a lot of data right now (only a page) but will have much more soon.
I am carrying out some sensitivity testing on a model, and would like to greatly increase the speed of the process by being able to call in from a user defined cell a named range, which is then pasted to the right of the cell.
The attached file steps through the process I have in mind.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories:
Requirement: 10358 Title: Customer requirement 1 Text: This describes the requirements for a product for the customer[code].....
The text of the categories may begin in column A or B
What I need is a macro that will search each worksheet for a category, e.g., "Configuration:", copy the row where the keyword "Configuration" is found, and then have that row transposed and pasted to another WorkSheet (e.g., "Extracted Data") cell.
Data extracted from the next Worksheet would begin a new row in "Extracted Data"
Example: Requirement1 Title Text Verification Method-Level ... Requirement2 Title Text Verification Method-Level ... Requirement3 Title Text Verification Method-Level ...
The Requirement# is best extracted from the WorkSheet tab since some of the worksheets are missing this information. I can provide an example spreadsheet, however, I was not able to figure out how do that in this post.
I found a thread similar to this problem:
find and copy row
However, it only finds, copies and pastes for one keyword.
I have another challenging solve for a VBA macro. So here it goes, as I have become frustrated trying to make an array formula with no joy. On my sample worksheet provided below this is what I am trying to accomplish:
(Solution cells) B4:I4 looks to the (Combination cells) M5:R10 for a match If a match is present then cell J4 gives a "win" , If no match then cell J4 gives a " lose ".
Next if a win is present in cell J4, then cell K4 looks for when the draw number that matches occurred on from cells A4:A10, then subtracts the two(e.g. solutions cells from combination cells) to give the actual " # of draws to a win ". If no win is present in cell J4, then the default is zero for cell K4
The formula would be copied down thru cells J4:K12
Please refer to sample worksheet attached so that you can understand more clearly of just what I'm trying to do.
I am trying to Copy Cell from one sheet to another sheet starting on A7 and then going to V ? i have a formula that figures that out for me just need another formula or VBA to copy it to the new sheet. i will attach the a test of the file.
Is is possible to get a dropdown list to show the actual characters as they appear in windings or marlett as shown in the source? When I try I am just getting a load of u's with accents and dots above.
I have set up a simple form in excel, whereby people use drop down menus to select the appropriate information (as all data inputted needs to be entered in exactly the same way to allow sorting, counting etc) so I thought drop downs were best. The trouble is the data is carried through to my excel database (on another worksheet) were it is shown in numeric values dependant on how far down the drop down list the select item appears (ie "Fareham" is third on the list, so shows in the database as "3").
I'd very much like my database to be easier to read and actually show Fareham etc, rather than be populated with lots of numbers. I initially tried using IF function (ie =IF(C3=3,"Fareham") but unfortunately two of my drop down lists are too long for this (with 25 and 33 entries respectively).
I have created the following code by recording a macro. The ActiveCells (“A1.A5203”) were based upon the actual number of records at that time. I wish for this macro to be used in a template and the actual number of records will vary from time to time. What do I need to add to this code to allow the AutoFill function to operate and fill only the actual number of records that exist.
I have a base document that i can import another data document with a button (this is working).
I then have another WS ("search") in the base document with lots of identifiers which I want to use as my search range to look through the document that I just imported (column A).
I need a msg to ask the user what month they would like to find the $ value on (Ie, January) in the imported WS... this way it doesnt copy the entire line only cell in the selected month column.
Then I want to the user to be able to click a button that will check through the identifiers on the "search" WS and if the same identifier appears in the imported WS in column A, then for the $ value in the column selected to be copied to the search Range work sheet.
If the idenfifier is not matched then in place of the $ value copied can be the string "no in XXX WS" .
I have attached the document with dummy data in each work sheet with details more cleary what I have meantion above.