I am adding rows of data to a worksheet based on criteria found in another worksheet. I've done this with two other worksheets in the same workbook without a problem.
In this case, I'm adding rows if the Utilization in the Master worksheet is >=150% and the logic I am using (which does not work) is:
I have a set of data (Data tab) that lists name, a high number, a low number, and the state that is associated with the name and range between the high and low number (see attachment). I am trying to figure out a formula that will return the state value based on a match of the name and the number between the high and low. I am trying to use Index/Match but i cant figure out the "between the high and low" portion.
tester.xlsx
I'm trying to create a formula in cell f13 of my attached spreadsheet "Sample 1" that will search the 2nd attached spreadsheet "Sample 2" and return the correct serial number based on both the matching PO # (located in cell E10 on Sample Sheet 1 and in Column 5 on Sample Sheet 2) and Product # (cell A13 on my Sample Sheet 1). My current formula is not returning the correct result and I'm not sure why.
View 4 Replies View RelatedWe know how INDEX/MATCH works, and it's very nice. I attached a COUNTIF to it to count how many times the index finds itself on another table; if it doesn't find itself, then it goes blank. However, this time I need to count how many times it finds a certain string condition in the other table.
sampleexcelhelp.xlsx
The columns that need to be filled are shaded in dark pink.
I have a WB with multiple sheets. I have a Feed sheet that automatically pulls data from the web. I have a Scores sheet that currently has all head to head matchups each week for an entire season. So I want to check the cells on the Feed! sheet to find a partial match and if partial match exists then copy cell that contents score from feed sheet to the score sheet next to the appropriate teams name. Currently I have to manually enter all scores each week for the rest of my WB to update.
I need to look at Cell A3 (on the Feed sheet) which has "New York Jets" then search for a partial/similar match on the score Sheet (which is NY JETS, in this case). NY JETS could be in column B (rangeB2:B257) OR column D (rangeD2:D257) BUT I need to search by row, not column, then once a match is found check the cell to the immediate right and only if the cell is blank copy data from the (!feed) sheet to that blank cell on the (!scores) sheet
This is what happens if working right =
look at cell A3 on the (!feed) sheet = "New York Jets" then search (!scores) sheet Column B and Column D by row for a partial match, finds "NY JETS" as match in cell D8, if cell E8 is blank then copies cell H3 from (!feed) sheet, and pastes to cell E8 on the (!scores) sheet, if cell is not blank continues search until 1st blank cell to the right of matching cell is found (as there will be mutiple matching cells with blank cells to the right but I am only interested in the 1st blank cell found, once found and data copied the process is done and then starts over with cell A4)
Look at cell A4 (!feed)= "New England Patriots" then search (!scores) sheet Column B and Column D by row, finds "NEW ENGLAND" as match in cell B8, if cell C8 is blank then copies cell H4 (!feed) sheet, and paste to cell C8 (!scores)
Once this is done it moves on to the next cell in the next row on the (!feed) sheet, A5, to find a partial match for the data in that cell. I need to continue the search for each cell A3 to A74, and if no match is found to move on to the next cell A6... (based on the way the data is pulled in from the web there are some blank cells as well as some cells that say Game Final, this data won't be on the scores sheets in column B or D).
I have a spreadsheet listing all my vehicles and their respective oil filter part number. Now, some vehicles share the same oil filter and I am trying to find a way to return the vehicle description when using the filter # as a value. In my example below, I am looking to fill the third column with the Vehicle that also shares the same oil filter number. i.e. in the Dodge row, toyota would appear in the third column and vice versa in the Toyota row.
Vehicle
Oil Filter #
Also used with
Dodge
51515
Honda
54565
Toyota
51515
I am not well versed in excel lingo which is probably why I have a hard time coming up with a method that works.
Trying to find if the number entered in the input box "num_cmp" is => Cells(i, 2) AND
View 4 Replies View RelatedI have a data set like this
Date ID
3/1/13 ID1
4/1/13 ID2
5/1/13 ID3
6/1/13 ID1
7/1/13 ID1
Now i want a VBA Procedure/function that gives the row no. of the row in which ID1 is appearing last. I can do this by a worksheet formula in worksheet or by looping in VBA but I need it in VBA without looping. The reason behind avoiding loop is data can be extended up to 50000 rows,so looping will take too much time to complete.
i want to match the cell phone numbers from the sheet working in the column C:C with the sheet GSM column A:A if it match the it has to print the data in GSM sheet column B:B in the working sheet
For (Eg) working sheet data as mentioned below
C
9841 9444 4424 4424 9841
GSM Data as mentioned below
A B 9762 Airtel 9762 Vodafone 9768 BPL 9768 Aircel 9782 Aircel 9783 Aircel 9095 Aircel 9715 BPL 9788 BPL 9788 BPL
if it match it as to update in working sheet as
C D 9841 Aircel 9444 Cell one 4424 Lan line 4424 Lan line 9841 Aircel
I have a whole list of numbers (e.g. 7, 23, 567) and I would like to be able to tell which range they fall within and return the category.
MinMaxCategory
1275Group A
276375Group B
376600Group C
601825Group D
8261,075Group E
Therefore 7 and 23 would be Group A, and 567 would be Group C. I can do as a long nested IF, but I'm sure there must be a better way.
I need a formula that will calucalte the monthly total based on the following conditions:
Col A = Yearly Cost
Col B = The number of the month when the costs are starting (1=Jan etc)
Col C = The duration or the number of months for which the costs are to spread
Col D is Year 2013 with the months across columns D-O. Row 1 above those columns shows the month's corresponding number.
Right now I have =IF($B3<=D$1,$A3/$C3,0) however if my start month is 1 and my duration is 5, I need the costs to stop after May. I've attached a sample file. Calculate based on start month and duration.xlsx
Is there a function that allows you to read column A for an ID (these may or may not include letters/numbers/"?", are non-sequential and are of variable lengths) and, if it is the first time that it has seen an ID column B will read "sample_1_arm_1", if its the second time it has seen an id it will read "sample_2_arm_1", etc? An example of what I am trying to do on a much larger scale:
id
event_name
C83-858
sample_1_arm_1
[Code].....
How to create a spreadsheet with what I think will be a very simple formula?
If date in B2 - date in A2 is 1 or less days, put a 1 in cell C2.
If date in B2 - date in A2 is 7 or less days but more than 1, put a 2 in cell C2.
If date in B2 - date in A2 is 30 or less days but more than 7, put a 3 in cell C2.
If date in B2 - date in A2 is 90 or less days but more than 30, put a 4 in cell C2.
If date in B2 - date in A2 is 91 days or more, put a 5 in cell C2.
OR
Another, maybe simpler, way of saying it is:
If date in B2 - date in A2 is 1 or less days, put a 1 in cell C2.
If date in B2 - date in A2 is 2-7 days, put a 2 in cell C2.
If date in B2 - date in A2 is 8-30 days, put a 3 in cell C2.
If date in B2 - date in A2 is 31-90 days, put a 4 in cell C2.
If date in B2 - date in A2 is 91 days or more, put a 5 in cell C2.
I have the following formula that returns a number, however it returns the first number it comes to when the criteria is met,
View 2 Replies View Relatedin one column I am looking up the value Yes to return the row number.
=MATCH("Yes",C:C,0) in this case it returns a 2
I want to use this row number in a sum...
i.e. =sum(b2:b&x) where x is the row number from the formula above, but it just errors out.
Need a formula in M2 that will count the number of digits that match in each row. The digits in H:L compared to the master list in A:A119766. The count will be from 0-5 for each row. The digits must be in same column....
View 9 Replies View RelatedI have to do a vlookup in 12 sheets (named ranges)
I use the formula '=vlookup(a1;choose(1;range1;range2; etc);2;0)
In this case I have to change the 'choose index_num' every time to match.
Is it possible to do the lookup without changing the 'choose index_num'?
I'm trying to do something similar to the Vlookup function (or Index/Match method) but with two or more parameters to match instead of just one. I want to returnn the Row where two columns match the input parameters. Using Vlookup is a problem because it only returns the first one.
Is the standard method to us Vlookup for one parameter, then check the second and if it doesn't match reduce the search field, find the next and check the second again etc? That would work but it would be much simpler if there's a 2 parameter function.
I am looking to do the following:
Say I enter the following values into a spreadsheet:
5
7
4
24
32
Is there a way to enter the value "36" and have Excel find the two values of 32 and 4 which add up to 36 for me? I will obviously be dealing with much larger spreadsheets and would like to somehow save time by not having to hunt down possible combinations of the total value I'm searching for.
Cell P14 = 4.7
My array is H42:N72, in H42:H72 I have numbers 15,14,13....0,-1,-2,-3, etc...
In N42:N72 there is a corresponding $ amount that I would like to return based on finding the value which is greater than 4.7 (so, looking to match the $$ amount to the number 5 in column H42:H72)
I've tried using INDEX MATCH but can't figure this out.
In cell A1 I have a number. I want a formula that looks at that number and then looks at row C on sheet2 where there are rows and rows of numbers. I want the formula to return the nearest match to the number in cell A1.
View 6 Replies View RelatedI have a spreadsheet with 60k lines. One of the columns contains barcodes as per the example below, with a suffix of -XXX-XXX where the XXX are numbers. I want to highlight all the cells where the -XX-XX are the same number (as in the example below -303-303) how I can do this with a formula as I've around 30 spreadsheets each with 60,000 lines I need to sort through?
2500071189898-303-302
2500071189898-303-303
2500071189898-303-304
2500071189898-303-305
I am trying to use a Mid function to help me in my vba problem.
In my first table I have a list of account numbers. E.g. 'ZZ500543'
In my second table I have a list of account descriptions. E.g. 'Denis Morgan ZZ500543 leak from bath'
I need to match the account number in Table1 with the correct account description in Table2. I thought a Mid function would be the best option to pick out the account number in Table2? Is this right? How would I go about using it?
I needed to know how to find the closest match to a reference number
regardless of whether its larger or smaller. I did a search and found a post
back in March that said to use the following:
=SUMPRODUCT(((ABS(list-target))=MIN(ABS(list-target)))*list)
I applied it to my application and it works, I just have no idea why. Can
anyone explain this formula to me or tell me where I can find a good
resource.
I recently showed my supervisor (again) how to double click on a pivot table to generate a worksheet that shows the records that were used to calculate the pivot table information. He's finally impressed and now wants me to perform the following miracle:
Workbook 1 contains multiple pivot tables showing completed project costs. The tables are broken down by various topics such as designer, worktype, project number, and amount of overrun or underrun. I update this report each month with completed projects.
Workbook 2 is a new report recently developed which contains contract modifications for ongoing and completed projects. It is updated weekly but may be updated monthly in the future.
He would like to click on a project number in Workbook 1 and have it generate a report with Data from Workbook 2 showing all the contract modifications that were written for the project. I told him this would probably work better in Access but he gave me "that look" because he does not want to use Access. This will be shared with other members of management who also do not want to use Access.
I have a number that I'd like to see ranked within a separate range. Ie if the number is 25 and I want to see how it would be ranked if it were in a range of:
3
43
12
19
22
7
88
(The answer would be 3 - 3rd highest). The RANK formula requires an exact match...
Sheet 1
23456
23479
23409
23512
Sheet 2
23455
23456
23457
23478
23479
23480
23408
23409
23410
23511
23512
23513
In Sheet 1 there's a Column B with data I'd like to pull using a VLOOK-UP formula. However, I need it too look-up not only the exact number match in Sheet 2, but also the cell directly above it and the cell directly below it. In the sample above if I placed the VLOOK-UP formula in Sheet 2 (at for instance the numbers 23455, 23456, 23457), I'd need it to pull data from Sheet 1, Column B (for the 23456).
I have a spreadsheet, with a Match Formula, that appears not to work. It looks at cell F1, and scans through cell C2:C14, and want it to return the relevant row in Column B (My work network will not allow me to upload the file). Cell F1 is the name of the sheets within the workbook (one for every month). However my data currently only has Apr - Jun, but when I choose month May, the formula feturns Month June.
View 3 Replies View RelatedI am trying to acccess a cell value from a seperate worksheet. The cell reference needs to be generated by a seperate formula. In this example
=DSInfo!C28 // provides the correct result i.e the contents of cell C28 on worsheet DSInfo =MATCH(A4,DSInfo!C1:C35,0) //provides the correct row number - in this case 28
However on trying to combine the two =DSInfo!C&MATCH(A4,DSInfo!C1:C35,0) // provides only a formula error. I'm guessing this is a simple syntax error on my part but after hours of trying various ways I'm still having no luck.
I have Sheet with 40 employees who each proposes their work schedule, so I have to give each Employee access to the same sheet and want highlight and unlock only those cells that specific employee can use.
Each employee has to login from a drop-down (sourced from Sheet.Employee Master), so their unique Employee Number is in "A13" of Sheet.LOGIN
Can I identify the ROW number and then use that ROW number in a macro to highlight and unlock specific Range of Cells in Sheet.PROPOSED SCHEDULE?
---where "Sheet.LOGIN("A13") = (the value in the cell Col A:"row" of Sheet.PROPOSED SCHEDULE)
I have attached a scaled down version of the Workbook.
Following code is scaled down-- this is for Employee 02 who appears on ROW 16 of the sheet. (macro is same for each employee, just uses a different row)