Can we add the value of the cell with the value of another cell? Fo example In Cell A1 have a value of 5 and In cell C1 i have a value of 10
Can I write a formula in Cell A1 Keep the value of the A1 and Add with the value of C1 10 to get a result of value 15 in cell A1.
i have a question about adding a number to a cell. This is the problem. Each day we track contacts we made in a spread sheet. how could i, lets say type 2 in a cell that already reads 42 and once a tab away from the cell it would change to 44 (add in the background 42+2=44).
View 5 Replies View RelatedCan you cut out part of a number and replace it in another cell. For example
A1 come in as ###+### and it will not always be a three digts all the time but I would like to keep the number in front of the "+" in A1 and the number behind the "+" into A2 cell.
Can you do this my a SEARCH("+",A1)LEFT("+)
I am trying to create a macro where it finds a a certain word in a column for example C. What i want it to do is find anything that says FWD_EUR and then replace that cell (e.g C2) with CASH_EUR_FWD and after it has done that it replaces the adjacent cell (e.g. D2) with EUR_FWD. I then want this to do the same with FWD_USD to CASH_USD_FWD and adjacent cell to USD_FWD.
View 2 Replies View RelatedI have over 16000 cells with different information in them, each cell is unique. There are parts of these cells that have similar information.
I am looking to search part of the cell, and replace the whole cell with my new description, so I can run pivot tables on it.
In column N I would like a formula to add 3 columns,e.g. C and D and F. The problem is I want the symbol ~ replaced by 1.0 for calculation purposes.I need a solution in 1 column,if possible. I have made a few efforts,but just not getting there. See attached section of sheet.
View 2 Replies View Relatedhow I could search for any number great then (x) and replace it a letter
For example I have an excel table with a series of weights.
lbs
6001
4560
6789
2000
5656
8879
1243
I like to replace any number greater or equal to 6001 lbs with the letters SS.
Example:
lbs
SS
4560
SS
2000
5656
SS
1243
Then I'd like do the same thing again but this time replace any number less
then or equal to 6000 lbs with the letters SS-LL .
Example
lbs
SS
SS-LL
SS
SS-LL
SS-LL
SS
SS-LL
I have a column of references I wish to standardize. Contained within a general text description there is also an order-specific reference number, which is not relevant for my purposes. I wish to find all of these numbers and replace them with nothing (i.e. retain the rest of the description).
The reference numbers are always in the format "P#####/##". Unfortunately these references are in the middle of the text field, not at the start or end, so I can't use a LEFT or RIGHT formula to delete them.
Once these reference numbers have been deleted I will then be able to filter for unique records only. When I do this at the moment the filtering has no effect due to these specific reference numbers.
This problem has come up fairly frequently lately, and I'm not sure how to fix it, or if this is by design...but in Excel 2003 I can't seem to do a "Find and Replace" based on the value of a cell. I can do a find, based on cell value, but the moment I change to the replace tab, the "values" and "comments" are missing from the "look in" dropdown.
I've only noticed this when I'm trying to replace on a filtered list, so I'm not sure if that is part of the issue.
Perhaps an alternative way of arriving at the same goal. Basically I have a worksheet with a number of filtered columns. They are filtered just right, using custom filtering, and so I do not want to undo the filters. In some columns I have formulas that are returning #VALUE! errors. I'd like to replace all of these cells with NA.
I recently became owner of a spreadsheet with some issues, and I am trying to make it useful. Each row has a URL of a blog post, and I want to extract the date from it (which is present in each URL) while getting rid of the rest of the URL. I was able to get rid of everything up to the year (which comes first), but then the URL continues, for example, 2013/05/16/the-rest-of-the-url/ and I would like to just have 2013/05/16 remain.
I am trying to use find and replace with the find box reading 2013/??/??/*/ and replacing it with 2013/??/?? which effectively erases everything else in the url, but leaves ?? instead of the numbers. Is there any way to have it so that it keeps whatever was in the original box?
[Code] .....
Trying to repeat a 550 or so character statement with a find/replace however I am getting type mismatch errors. When I use a smaller message in the "replace" it works.
I need it to post a message exactly as long as what I have in there. How do I get it to work?
Need assistance with the code for catching errors when using the find / replace function in excel? In particular, I am trying to write code to break to an error message when the value or string searched for isn't found in the find / replace. At the minute I have just copied the standard code using a macro and all this does is return a message box saying X entries replaced.
View 3 Replies View RelatedI have values in row A and I have values in row C. I want to create a loop to look up xxx and replace it with the values consecutively in row C. Look at example for a better Idea. I found a way to find and replace, but I not sure how to use it with qoutes. I was thinking maybe I dont even need row A and just supply a list and excel could have the chunk of data in the code itself.
View 2 Replies View RelatedI am working with a spreadsheet that has our user data; User(First) Name, User(Last) name, Computer Name, MAC address, Phone Number, Seating Position and Network Port Number.
I have let this get horribly out of sync, moved computers around, and moved them while the MAC address column was hidden, As a result, I have a bunch of users listed as being at the wrong computer. I have a second spreadsheet I generated that gives me the logged in user for about 2/3 of my computers, with the computer name(Just 2 columns, 'A' and 'B'. I would like to have Excel match the computer name and then overwrite the user name. For example, if the first computer in my correct user list is DELL-99945ty2, and the user name is "Jimbo Jones", I would like it to search the first Excel doc(The one with all of the user data), and replace the user name with "Jimbo Jones". Is this simple and straightforward?
In my main spreadsheet, the user name is in column B and the computer name is in column G, So I want to use the values from Column B in my second document to find its match in Column G of the first spreadsheet, and then replace the data in Column B with Column A in the first spreadsheet.
multiple search match and replace content in a different column so for example
new workbook (look up table)
sku
search1
search2
[Code]....
so something like where you compare two tables and find and replace based on another cell that matches in my sku.. more details would be if the table column aren't exactly matching but the column header and the row header would match and fill or replace in the correct/corresponding cell is there a macro or vba to do this job in excel?
In a sheet (4) I have a pivot refreshed by a VBA macro code. Since I have defined a Chart on this pivot, I need to copy this pivot in a new sheet to avoid to reduce rows using a filter of the Chart. I copy this pivot using this VBA code
Sheet4.Select
Sheet4.Copy After:=Sheet2
I have e new sheet with a number Sheet(n) not equal to maximum sheet number +1
For a new run of the VBA macro I need to delete this sheet
Sheets(n).Select where (n) is not = maximum sheet number +1
ActiveWindow.SelectedSheets.Delete
Then I need to avoid the message box where I need to confirm to delete the sheet because the sheet is not empty.
Is there a solution to copy a pivot in a new sheet replacing the previous pivot and vithout changing the number of the sheet?
I need to find the "x" in range C2:C44 and replace it with a value (variable) specified in cell I2
The catch is that I then need to be ablt to change that character when I2 changes.
Coloum C
*VER
*T’x’STATUS
*ON
*OFF
*T’x’BANDS
EG
I2 - Variable = B
*T’x’STATUS will become *T’B’STATUS
I2 - Variable = A
*T’x’STATUS will become *T’A’STATUS
But " *OFF " should not change.
I can change *T’x’STATUS to *T’B’STATUS but then I can change *T’B’STATUS to *T’A’STATUS
Please see attached example file as it shows it better than I can explain it.
I have a file consisting of two columns, called, "bom ref" and "material"
I need to show the data as indicated in the file, headed required format required.
In effect where I have a 0, that is the material I need to show for every row with a bom ref. of 1,2 or 3, down as far as the next 0 but not including the 0, when I reach the next 0, the material is a new letter, and that letter needs to repeat down as far as the next 0, but not including the 0 and so on.
SAMPLE FILE "error_finder.xlsx (36.5 KB)" attached...
The VP of our company needs me to create a spreadsheet.
For this s/s I need the following:
Imagine 2 sheets in Excel...
sheet1
sheet2
sheet2 has sequential numbers in column1 starting in row2 with the number 1 until wherever..., so cell A2 has number 1, cell A3 has number 2, etc...
Manually, a user has to fill in certain text next to a number.
This for example would look something like this:
_|A| B
-|-|-----------------------------------|
1| | Error-description
-|-|-----------------------------------|
2|1| Whatever the 1st error would be...|
-|-|-----------------------------------|
3|2| Whatever the 2nd error would be...|
-|-|-----------------------------------|
4|3| Whatever the 3rd error would be...|
-|-|-----------------------------------|
5|4|
-|-|-----------------------------------|
6|5|
-|-|-----------------------------------|
and so on...
All this would be on sheet2
In a cell on sheet1 I now need the number from column A displayed, that has the latest entry in column B.
In the example above this would have to be the number 3 in cell A4, because right next to it (in cell B4) is the last entry "Whatever the third error would be..."
Addition: There are several sheets, each sheet stands for one error listed on sheet1 in column A
sheet1 for example would look like this:
_|____A____|_B_|_C_|_D_|
-|---------|---|---|---|
1|_________|833|933|934|
-|---------|---|---|---|
2| error 1 |___|___|___|
-|---------|---|---|---|
3| error 2 |___|___|___|
-|---------|---|---|---|
4| error 3 |___|___| 3 |
-|---------|---|---|---|
In this example, because "whatever error" (cell B2 to B4 on sheet2) was found on press 934 was the 3rd error (cell A4), the number 3 (cell A4) would have to be populated on sheet1 in cell D4.
I have a table that i would like to update. All my macro needs to do is search the entire first column of a table for a match to cell A1, there will only be 1 match, once the match is found row b's values need to replace the row thats entry in its first column matched cell A1.
View 9 Replies View RelatedI am looking for the macro which can replace cell value with his first row. e.g. Column D contains the cell value "X" and i want to replace that value with D1. The same i am looking for all field.
View 5 Replies View Relatedi want to replace things with reference of cell for example:-
Find value in B2
replace with value in C2
in whole sheet
I have the following data in sheet 1. In Sheet 2, column A contains a list of data.
What I need to do is to compare data in Column C (sheet 1) to Column A (sheet 2).
If it matches, then Cell value in A will change to be the same value as B.
For example, range C1 of sheet 1 matches that of Range A2 in Sheet 2, then range A1 of Sheet 1 becomes the value of B1.
How can I use VBA to achieve this? Do note the data in Sheet 1 and sheet 2 changes all the time. It can be more or less.
Sheet 1
A
B
C
D
11
12
TH
[Code]..
Sheet 2
A
B
GG
TH
AA
HE
My desired results:
A
B
C
D
12
12
TH
[Code]...
I have a file that I import into excel and append to the end of the last free position, However my totals are slightly out when compared to the main system.
I have found the reason why, they randomly slips in a Credit or credits.
So I have the scenario column P has a txt field and the majority of the time it has SI (Invoice) however when they issue a credit the txt becomes SC.
The annoying bit is that Column L has a value but it is not a negative number i.e. 75 where it should be -75
I can do an iF then and find the SC or SC's and I can place some text in Column L but I would like to be able to take the value in L and make it a negative number.
I found the below code and have tried adapting it without success.
Code:
Sub Colorize_Word()
Dim Found As Range, FirstFound As String
Dim FindWhat As String, MyColor As Long, Counter As Integer
MyColor = 3
FindWhat = LCase(InputBox("Find what word?", "Color word"))
[Code] ..........
This code finds any string in a cell of your choice and colors it red. I would really like to replace the string with my own string of text. I couldn't use the simple find and replace function as this replaces the WHOLE cell content not just one word.
I believe the line of code that needs editing most is this one
Do
Found.Characters(Counter, Len(FindWhat)).Font.ColorIndex = MyColor
Counter = InStr(Counter + 1, LCase(Found), FindWhat)
But I cannot figure out how to use the replace function with this.
I have an empty cell that a user can enter in a value if they choose. What I would like to do is override their value with a formula based on the selection from a data validation list. The part with is how to override the cell contents.
View 6 Replies View RelatedI need a formula in i.e F3 ... that will check cell G3 to see if there is any values in this cell... If yes... I need the values in G3 to be replaced with "1year" if false .. then "".
View 9 Replies View RelatedI want to search column K for the word "test" and for each match, replace it with what ever cell value is in the same row but from column T ?
View 9 Replies View RelatedI'm wanting to use Excel's built in replace function to replace ANY date with "Call:"
I'm not going to go into details about why, but I cannot use a code, as I only want to change them at specific times.
The dates are currently formatted as 12/09/2009. So I need to change the 12/09/2009 and any other date there may be to "call:" without having to go through every possible date.
I have some data in Column L starting from L5,
some data in Column C starting from C5
and some data Column D starting from D5.
What I need is to replace the cell values in column K with adjacent cell values in column J if the adjacent cells in column L,C and D fulfills the criteria of GBP, GBp and cell values starting with GB(for column D) respectively. I need to do this via VBA.
Initially column C
Column D
Column J
Column k
Column L
GB123
GB
1
2
GBP
[Code] ....
Desired results column C
Column D
Column J
Column K
Column L
GB123
GB
1
1
GBP
[Code] .....