Show The Accumulated Amount Found In Another Worksheet Within The Same Workbook Where The Value Added Will Be Accumulated Only When The Criteria Is Met
I have one worksheet in, which I have to show the accumulated amount found in another worksheet within the same workbook where the value added will be accumulated only when the criteria is met. I have enclosed herewith a sample of what I am trying to do since it is long to explain in writing. As the chinese proverb says: "better see once than hearing/reading 1000 of words.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Hide/Show UserForms Based On Workbook And Worksheet
I'm just beginning to work with userforms and have created a couple of forms for workbook navigation. The Menu form is set to appear only on the menu worksheet and the Navbar form is set to show on several database sheets. Both forms are set th hide when the workbook is deactivated. Private Sub Workbook_Deactivate() Menufrm.Hide Navbar.Hide End Sub The problem is that when I return to the workbook the forms do not unhide. Using the workbook_activate event causes both forms to show simultaneously. I also have the worksheet_activate event set to show the applicable form. Private Sub Worksheet_Activate() Application. ScreenUpdating = False ActiveWindow.DisplayGridlines = False Navbar.Show Navbar.Left = Range("B3").Left Navbar.Top = Range("B3").Top Application.ScreenUpdating = True End Sub Upon returning to this workbook, I only want the appropriate form to show relative to the worksheet that is active. That is, if I was on sheet2 when I switched to another workbook, sheet2 would be active when I return to the workbook and should show the Navbar form. The menu form should show on sheet1, and the navbar form on sheets 2-5. How do I get the correct form to show when I re-activate the workbook?
View Replies!
View Related
Countif Formula: Added The Correct Amount In The Correct Cells
I'm trying to create a formula that will added the correct amount in the correct cells, I have create a dunny sheet in trying to achieve this. If Cell B8:B11 = ABS or Dum that any points won should be added to Cell L8:L11 right now its adding it into K8:K11. If Cell B8:B11 = is Blank any player points should be added to cells K8:K11. I'm using this formula throughout cells K8:K28 =IF(J8>J25,1,IF(AND(J8<>0,J8=J25),0.5,0)) Any thing in red is incorrect anything in blue is what I'm trying to achieve.
View Replies!
View Related
Show Month Of Date Added In Cell
In one cell the user has to fill in a date, example 20.3.2008 and then in another cell he/she has to choose a month from a list (january-december). I need a macro that checks that the month stated in the date cell is the same as the month selected in the other list cell.
View Replies!
View Related
Show Blank If Condition Met
I would appreciate it a lot if someone could explain to me how I hide the value in the cell which a result is stored in when one of the two cells in the calculation is empty. For exaple: C1 should be blank if A1 or B1 is empty in this formula: =A1+B1
View Replies!
View Related
Show Message If Completion Date Not Met
I have a spreadsheet where I have input all of my technicians service calls and installations. In Column C Row 5 and up to the max I assume because I'm not sure how many rows I would use in a year, I have an estimated completion date. In Column D and the same Rows as above I will input the Actual Completion date. What I want is if the current date is past the estimated completion date (Column C) and there is no date entered in the Actual Completion date (Column D) I would like a MsgBox to pop up saying "Please enter a new completion date on row _" "_" would be which ever row the estimated completion date has expired without an actual completion date being entered.
View Replies!
View Related
Show MsgBox If Cell Format Met
I am trying to pop open a messagebox if a cells interior color index = 3 in a named range. Private Sub Workbook_Open() If Sheet1.Range(" Schedules").Interior.ColorIndex = 3 Then MsgBox "One or more Trainee requires more than TWO HOURS PER WEEK to forefill his log book requirements" End If End Sub
View Replies!
View Related
Show Different Result If Match Is Found
I'm having problems with a formula. Here is what I would like to do: I have a named range named "J46DATA". If B5 returns "N/A" when matching to "J46DATA" and S5<>0 then return "DELETE" or IF B5 returns "N/A when matching to "J46DATA" and S5 = 0 then return " ALERT". anthing else can return false. I started of with =IF(AND(ISNA(MATCH(B5,J46DATA,0)) But it wouldn't let me put the S5<>0 after that lat parantheses.
View Replies!
View Related
Formula To Show A Date Range Based On The Amount Shown In Another Cell
Attached is a excel file that has a working formula for tracking cashier variances. I edited out names etc. I added a new cell called Track Back on the employee search sheet. What I want to do is only show variances for the amount of days back selected in the Track Back cell. For example if I select the last 30 days, only the last 30 days would show up below in the sheet. I am not sure if this is even possible based on the forumla that is already on the sheet. I couldn't figure out a way of doing it. But there are a lot of people on here much better with excel than me
View Replies!
View Related
Counting Until Criteria Met
I am looking for help on 2 aspects on my spreadsheet. My Spreadsheet looks as follows: My first query is - How can I create a formula which will show in cell G3 the amount of cells from a number value in f3 (inclusive) down until the next number value is reached (but not including it)? So for the first instance - it would be f3 down to f14 - which is 12 My second query is a little more complex... I am looking to display - for the same criteria above - all entries in column B in their own seperate cell. So for the first number - it would show 02B:D5 in cell H3, 15B:C5 in I3 and so on...
View Replies!
View Related
Freeze Value In Cell If Criteria Is Met
Just wondering if its possible to achieve the following please: If Y5=U5 then place text "High" in cell Y4 and If Y6=U5 then place text "Low" in cell Y4 BUT how can i make it so that once the above criteria is met, and the relevant text is placed in cell Y4, how can i make it so that it Keeps that Value in Y4 now (even if Y5, U5 or Y6 change afterwards)?
View Replies!
View Related
Formula To Sum If Criteria Is Met.
I have this range of data, but I am trying to summarize it and add it back to another worksheet in the same book. ******** ******************** ************************************************************************>Microsoft Excel - Enterprise_Demand_v0 4.xls___Running: 11.0 : OS = Windows XP File Edit View Insert Options Tools Data Window Help AboutA1=ABCD1PartHub CityINV21X023EAGLE_NASH_EG3Nashville14031X023EAGLE_AUSTIN_PN3Austin320041X023EAGLE_SPHOhio50051X024EAGLE_AUSTIN_PN3Austin218061X024EAGLE_NASH_EG3Nashville226071X024EAGLE_SPHOhio134086878TEAGLE_AUSTIN_PN3Austin1190096878TEAGLE_NASH_EG3Nashville900106878TEAGLE_SPHOhio5001178PEPEAGLE_AUSTIN_PN3Austin500Hub_Dmd [HtmlMaker light Ver1.11] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR. What I need to do is SUM the INV if the city is Nashville. I've tried Subtotal, sumif, etc.. I have never used any of these functions, so I would appreciate some help figuring out the formula to use. The formula will be a part of a larger macro.
View Replies!
View Related
Spread Values When Criteria Met
I have worksheet where I would like to apply a number value proportionately throughout a column bases on user-defined conditions (i.e. >=, <=, Between) from other colunmns. See example below and attached worksheet with further detail. Col A Col B Col G Col L Col M 01380Employee 15.0 5.5 (0.8) 00304Employee 24.0 - (0.8) 01901Employee 33.8 (1.0) (0.8) 01729Employee 43.0 - (0.8) 01482Employee 53.0 (1.1) (0.8) 00299Employee 62.5 - - 00069Employee 72.5 0.5 - 01783Employee 81.5 - - 02076Employee 91.0 - - 01934Employee 100.5 - - TOTAL 4.0 -4.0 In the above example, I would like to have the TOTAL value of Column L (4.0) be inversely spread throughout column M based on criteria selected by a user in a section of the spreadsheet. Criteria: Column G >= 3 AND all values in Column L = 0; Spread -4.0 (Inverse of cell L12 = 4) in column M for records that match criteria. I would like to have a command button apply the logic of the conditional criteria set for Columns G & L and spread proportionately ithe value from n Column M. I added examples of the different criteria and the layout in the file attached.
View Replies!
View Related
Summing Numbers When Certain Criteria Are Met
I would need to get this next thing working: H I J K L M N O P Type No. No.Points Points/RN Points/KR Points/KV Points/ER R/V Total 5 KV 12 4 2 3 4 6 0 8 6 RN 90 18 3 4 5 8 0 26 7 KV 12 4 4 4 5 6 10 13 8 ER 9 KV 10 KR ...and so on, with the following logic If Type = KV, then P$ = sum(J$,M$,O$), but if it is something else, like RN, then it needs to sum J$,K$,O$ I've tried using the following: =IF(ISNUMBER(SEARCH("KV";H2));SUM(J2+M2+O2);0;IF(ISNUMBER(SEARCH("ER";H2));SUM(J2+N2+O2)); but only the two first ifs work, which is kind of logical, since the second if is the "value if false" statement. Is there any way to get this to work?
View Replies!
View Related
Shade Cell If Criteria Is Met
I have a work sheet that has a date in a cell B7 and the system Date is Cell AB4. What I wish for the sheet to do is shade the cell depending on the following criteria: If the date in Cell B7 is 2years and 10 months Before the System date to shade it Green, If the Date is Between 2 years 10 month and 3 Years before the System date shade yellow and if it is 3years and over shade Red. For example if the date in B7 is 11-12-08 and the system date is 13-01-09 then the cell will be shaded Green.
View Replies!
View Related
Highlight The Cells When Criteria Met
=IF(AND($P2="Yes",COUNTIF($L:$L,L2)>1,$Y2="Market Specific"),TRUE,FALSE) But it is not doing exactly what I want it to, and I am struggling to work out what I need to change to get it to do so. I want the formula to do is look at a three Columns of data, and to highlight Cells in Column Y when the following criteria are met: The Row is active (determined by the "Yes" part), that the Row is "Market Specific" and that there is more than one Row where these Criteria are met (this is where I thought COUNTIF would work, but it's not).
View Replies!
View Related
Sum Of Columns When Criteria Is Met
1) If B1:2008 is "EA" (and so on for about 7 other classes) then count how many days are entered in G8:2008 so a cell on a seperate distribution sheet tells me how many sickness days in total have been taken by EA's (and then the same for the other classes).
View Replies!
View Related
Count Cells Until Criteria Is Met?
What I need to know how to do, is automatically count, in column 'd', the number of days its been since the number in column 'c' (same row) has shown up in column 'b'. Attatched is an example of column 'd' already filled in with the correct answer, however, I want it to be calculated automatically.
View Replies!
View Related
Delete Whole Row, If Criteria Is Met
I've got a menu in which the user has a checkbox with 3 choices. Choice 1 = Red Choice 2 = Blue Choice 3 = Green My macro looks at what the user selected and then goes through a column on the spreadsheet - for example say the user only checked Green. In this case, a variable would be set to 001 (if they checked blue and green the variable would be 011...). The then macro goes through coulmn x and whenever there is a "Green" in column x, it selects the row, deletes it, and evaluates column x's next row. My problem is, that I'm not deleting all of the rows with Green in column x. I've set breaks throughtout the code and the variables are all set correctly, I've checked for spaces before/after "Green" in the rows not being deleted, and nothing seems to work. Here's my code: Case Is = "001" Do Until IsEmpty(ActiveCell.Value) If ActiveCell.Value = "Green" Then ActiveCell.EntireRow.Delete End If ActiveCell. Range("A1").offset(1, 0).Select Loop
View Replies!
View Related
Return Value When Criteria Met From Another Cell
I have the name of an employee in cell B5 that I choose from a list. In cell L18 I have the result of the quality monitoring for this employee for a certain task. Now I have a seperate spreadsheet where I need to come up with individual performance scores. What I need to do is return value in L8 if B5=the agent I'm looking for. This also means that I would need to be able to do this on multiple cells in the same sheet. I've tried: =IF('[Workbook.xls]Sheet1'!$B$5=Name Employee,'[Workbook.xls]Sheet1'!$L$8,0) But I get a #name error and being pretty new to this I have no clue what to do next.
View Replies!
View Related
Color Interior If Criteria Is Met
I have some code that recently I found I had a new criteria that I originally did not have when I worked my original database. THis code works perfectly as is BUT if in column "D" if this is blank I would like to do nothing/ make no changes in that row. Sub ChangeColorsotherdesigXXX() Dim c As Range For Each c In Range("D2", Range("D65536").End(xlUp)) With Range("a" & c.Row & ":s" & c.Row) If Not CStr(c.Value) Like "612#" And Not CStr(c.Value) Like "712#" Then .Interior.ColorIndex = 36 .Font.ColorIndex = 1 End If End With Next End Sub
View Replies!
View Related
Delete Cells Content If Criteria Not Met
I have a long list that has all the services from our stores. I´m using the formula below to count how many services does each store have that are over 20 days old. =SUMPRODUCT((G!$A$2:$A$6000=$B4)*(NOT(G!$I$2:$I$6000="Valmis/Odottaa nouto"))*(NOT(G!$I$2:$I$6000="Valmis, toimitettu"))*(NOT(G!$I$2:$I$6000="Finished/WaitingDeli"))*(Päivämääärät!$C$1-G!$C$2:$C$6000>Päivämääärät!$I$3)) Now i´m wondering is it possible to make a macro that would delete all the cells in the range that do not match the criteria of my formula? With one exception in sheet G cell A2--> has the number of the store. There are over 40 stores so each store has a number 10, 20, 30, etc... This is the part of the formula that determines witch store it is counting (G!$A$2:$A$6000=$B4) B4=10 in this case and B5 would be 20 and so on... By modifying that one part i can count old services for all of our stores. Now I want the macro to delete all services from the list that are not over 20 days old and belong to the store 10 (B4). If it would delete everything that dont match that formulas criteria i could not get a list of old services for our other stores. What i´m trying to accomplish is get a list of the services that are over 20 days old. I´m now picking them from the list by hand and that takes a really long time. Because of the number of the stores and the size of the range.
View Replies!
View Related
Copy Row When Column Criteria Met
i have is a sheet with abotu 1000 rows of data and 21 columns. I want to scan column E for 13 different criteria types. If the criteria is met, then I would like to copy the same row of data. here's the catch, I dont want the entire row of data, I only want about 10 of the rows. I want these to be pasted onto other sheets in the workbook. Another problem I have run into is, IN column E, there are some spaces in soem of the rows. This has led to problems I have found in other solutions i have tried. I am familar with VB some, if i can just get pointed in the right direction I think we can get this figured out.
View Replies!
View Related
Multiple Criteria Met In A Sumproduct Formula.
I have 2 columns of data being populated by vlookups Column H is both numbers and text. Column I is Text and blanks. I need to be able to find only numeric values in column H greater than 0 and compare those occurrences with the corresponding cells in column I and if column I has a text entry (not a blank space) than to count that and at the end give me a total number of times these 2 criteria are met. As an example. If column H has a text entry then don't count it. If column H has a number less than zero then don't count it. If column H has a number greater than zero but column I is blank then don't count it. If column H has a number greater than 0 and column I has a text entry then count it. I've tried using many variations of a sumproduct formula and none of them work. This formula counts all instances where column I has a text entry without checking column H for a number greater than 0. =SUMPRODUCT(--(H2:H110>0),--(I2:I110<>" ")) Or it's possible that the formula is counting the text entries in column H as a number greater than 0 but I'v tried excluding text using this.. =SUMPRODUCT(--(H2:H110>0&<>"*"),--(I2:I110<>" ")) but this causes an error in the formula somehow that I can't figure out. I even tried this =SUMPRODUCT(--(H2:H110>0&"*"),--(I2:I110<>" ")) and I get a formula that counts only the times text appears in column H and column I together which is not what I want either. I'm self-taught on Excel so I know there's a lot I'm not understanding about creating formulas like this but I need to have this working by Friday and I just want it to work.
View Replies!
View Related
Sum With Multiple When Two Ranges Or Criteria Are Met
What I'm looking for is that it ADDS the values, when 2 or more ranges and criteria are met. I don't think it's possible through the SUMIF because it allows "range,criteria,sum_range." But I know there's another way around, if so, please demostrate in a basic formula. Like.. I have something on A:A (name) and B:B (points), and the formula must meet the 2 ranges & criterias (name & points) to add the values in C:C (money).
View Replies!
View Related
Compare And Display Data With Met Criteria.
I have a Workbook that contains 2 sheets. One of them has a list of customer codes in one column, product codes in the next and product description in the last. The second sheet has a list of customers with their respective codes next to the names. I have a buton that when pressed asks to select a customer code from the second spreadsheet. After the selection is made a new sheet is created and that code is displayed there. This is as far as i got. What i would like to do next is loop through the 1st sheet looking for the customer code that has been selected and in the newly created sheet display the product code and description that is next to that particulare customer in the first sheet. I'm sorry if my description is a bit fuzzy im just very tired. I will atach the spreadsheed with the vba code tha i have so far. Thnak you in advance to anyone that would be willing to help.
View Replies!
View Related
Paste Rows Into New Sheet When Criteria Met
I have an example spreadsheet attached which contains 5 sheets. The 1st sheet ("raw data")contains the master data and the other sheets (which are blank at the minute) are the destination sheets. I'm after a macro that will iterate throught the "raw data" sheet and when it finds the first cell in column B that starts with 'POPRS' it copies and pastes this and the remainder of the row (through to 'H') into the new sheet 'POPRS' and continue to do this for all instances where column B cells start with 'POPRS'. Likewise with the rest of the Grades in this 'Raw Data' sheet.ie Instances of PORAW,PORTP,POPRS etc. Column 'A' must be pasted also
View Replies!
View Related
Between Formula: Give A Whole Number When A Certain Criteria Is Met
I am trying to do something for a baseball game I am creating. What I am looking for is a formula for one cell that will basically give me a whole number when a certain criteria is met. I am also looking for this cell's formula to get part of it's formula from another cell in the document. So let's use cell A1 has 1.50 in it. I want this other cells formula to be able to give me a 9 if A1 is 0.00-1.50, a 8 if A1 is 1.51-2.79, 7 if A1 is 2.80-4.30, a 6 if A1 is 4.31-5.49 and 5 if A1 is 5.50-500.00.
View Replies!
View Related
Sum Only If Multiple Criteria Is 1st Met
Have tried SumIf but still not good enough. The formula I'm looking at is to sum up 2 or more column if the below criteria matched: 1) Cell A1 = Cell A2 and / or Cell A3 2) Cell B1 = Cell B2 and / or Cell B3 3) Cell C1 = Cell C2 and / or C3 Which formula should I use?
View Replies!
View Related
Automated - Add Comment If Criteria Met
I have attached a work book that has 3 sheets. Basicly I have 2 columns of records on sheet 3 that may or may not match Sheet1 has one set of those records. If on sheet3 the records in each row to not match I want a Comment added to that row on sheet one with the opposite value. I have make Comments to walk you thru want I would like on the workbook and have made and example comment of row3
View Replies!
View Related
Loop To Delete Row When Criteria Is Met
I am using this to delete rows from my excel sheet. I basicaly start my script by placing xxx in cell B2000. I want to optimize my code and maybe some how tell excel do until last cell. I am playing with: "Do Until lLastRow = Range("B" & Rows.Count).End(xlUp).Row" But not shure how to procede with this. Range("B1").Select Do Until ActiveCell = "xxx" If ActiveCell = "Ticket" Then ActiveCell.EntireRow.Delete Else ActiveCell.Offset(1, 0).Select End If Loop
View Replies!
View Related
Move Data Row When Criteria Met
I have a spreadsheet with when column K is Yes I need to move the data on that appropiate row to the corresponding worksheet in the same workbook. I have the button working but it moves the data in the row if No is in column K which is what I don't want. It also moves - removes the variables but I guess that is another question for another day.
View Replies!
View Related
Find Text, Go To Found Cell & Show Message If More Than 1 Occurrence
I have a file that the user selects and when they enter a value (in this case, a job title) into the input box, my macro looks for the value in that file. If the value is there, a msgbox pops up that lets the user know that the value was found and it then goes to that cell, displaying in the next msgbox the cell address of where the value was found. I already have the code down for this part of the macro. My problem is what happens if the file has the same value more than once. Ideally, I'd like to display a message box that returns the addresses of both cells with the same value and then prompts the user to select one of these values as the value they are looking for. I am not sure if a msgbox or a msgbox and then an input box are most appropriate for this situation. Once the user does this, the macro continues. The rest of my macro is built on the cell where this value is, so it is crucial that I make sure there is at least one value selected. Any help is much appreciated. I have included a sample worksheet of what this situation might look like. Here is the code I presently have for this part of my macro. Sub GetOpenFileName() strFind = InputBox("Please enter the job title you wish to search for:", "Search for job title in this file") If strFind = vbNullString Then Exit Sub With Sheets(strSheetsMainCompProfile) If WorksheetFunction. CountIf(Range(Cells(1, 1), Cells(100, 100)), "*" & strFind & "*") = 0 Then MsgBox strFind & " cannot be found on this sheet" Else
View Replies!
View Related
Get Index Of A Button Added To Worksheet
I have created a calendar to enter various locations. At present they are set up using VBA and are called from buttons on the calendar. What I want to do is add a button to the worksheet and then edit its text. I will call a subroutine to use the edited text as the name I want in the calendar. What I cannot figure out is how to return the index of the button have just added so i can alter the button text. I appreciate I could cycle through all the shapes on the sheet but as I do not know the number of the one I have just added I cannot work on the correct one. I suppose I could cycle through all of them and use a carrier to count how many there are then add one to get the latest but that seems very crude not mention time consuming as I allready have 504 text boxes on the claendar.
View Replies!
View Related
Edit Links When New Worksheet Added
[url] I was wondering if it is possible to update links from one worksheet to another that contains a running tally - even when another worksheet is added and needs to be linked to the running tally as well? I have attached a sample workbook. What I have is a summary sheet ( Sum Hrs CMS) that has SUMIF calculations for a series of rows in the Estimate Sheet. The problem that I have run into is - when you press the Add New Sheet button on the Estimate sheet, it copies hidden sheet and inserts it at the end of the workbook, however I then need the hours in the CMS portion to link to the summary sheet. What I was wondering is how do the links on the 'Sum Hrs CMS' sheet include this new sheet and the data that is entered on it?
View Replies!
View Related
Deleting Multi Rows If 1 Row Criteria Met
I have attached a sample of my data. What I am looking for is the best (most elegant solution) to my problem. I am trying to create a macro where I have 2 sheets. Sheet 1 will contain my data, sheet 2 will contain a single column of criteria to search through sheet 1. I would like for the macro when it finds that criteria, it will delete all rows of data that is tied to that ORDER_NUM Schedule EFGHI1ORDER_NUMAREADL_DATESHIP_CODEPART2113510395CANADA EMPACT20100108IN445N3113510395CANADA EMPACT20100108IHT9534113510395CANADA EMPACT20100108ID981C5115436953CANADA EMPACT20100110IPMDMN6115436953CANADA EMPACT20100110IN246F7116292017CANADA EMPACT20100111IY1G0M8116411203CANADA EMPACT20100111IT571R9119169642CANADA EMPACT20100113I9M62C10119169642CANADA EMPACT20100113IT272C For example, it my criteria was part N445N, I would like for it to delete all rows of data that is tied to that ORDER_NUM (113510395). Desired Output Schedule EFGHI1ORDER_NUMAREADL_DATESHIP_CODEPART2115436953CANADA EMPACT20100110IPMDMN3115436953CANADA EMPACT20100110IN246F4116292017CANADA EMPACT20100111IY1G0M5116411203CANADA EMPACT20100111IT571R6119169642CANADA EMPACT20100113I9M62C7119169642CANADA EMPACT20100113IT272C
View Replies!
View Related
|
TRACKER
