consolidating data from 3 worksheets which contain same data fields but each representing 1 brand. I like to have a summary/mastersheet to contain data from all 3 worksheets and then when the data in each worksheet is added or updated, the summary worksheet should reflect the changes (adding new data to the last row).
Project Submissions.xlsx
I have a graph that is showing the date on "Y" axis and a value on "X" axis, when I add a new date and value to my data the graph does not update, it just shows the data when I first created the graph.
How do I get the graph to display the new data I entered ?
I created a line graph by clicking on the "A" in column "A" (Thats where my date is) then clicking on the "B" in column "B" (Thats where my values are) and clicking the create graph button then clicked finished.
I think this needs a For Each loop, but I am stuck on how to get it accompished. In the folder I will have about 26 workbooks with all different titles, but the beggining is always the same for the workbook and the worksheet (Bldg). There will be only one ws per wb and the wb I am using to collect all of the worksheets is Final.xls. The code attached works fine, but the only way right now I know how to capture the next wb/ws is with a call.
Sub CopyAllWrksht() ....
I need a macro that would consolidate all data in multiple worksheets of multiple workbooks in one Master file.
All the workbooks will be in one particular folder. The macro should search for data in all the workbooks and consolidate it in one master excel workbook.
I am currently using both excel 2007 and excel 2010. This macro would really reduce manual work as currently consolidating data from 45 to 50 sheets takes an ample amount of time...
I am trying to consolidate a specific range on 8 similar worksheets into a master list through the use of a macro, and the workbook has a total of 26 worksheets. Details:
The worksheets to be consolidated are named: AR, CM, JR, Trader1, Trader2, Trader3, Trader4, and Trader5. The range to be consolidated are: A6:F26, of each of the above worksheets. Currently, A6:D21 are linked through an array from the worksheet "Index". This is because there are often changes to the names listed under "Trader/Backup Trader", or there may be additions/deletions of a row.
Right now, I have set up a sheet called "Traders List", using arrays to link the data on the 8 different sheets. The only problem is, if there were a change in the "Index" worksheet, I would have to manually drag out each array, for these 8 different worksheets in the "Traders List" sheet. Is there a way a macro can be written such that it is automatically linked to each range (A6:F26) on those 8 worksheets? Is it possible to only show rows that are non-zero?
l need to consolidate up to 3 columns of data from a varied number of worksheets within the same workbook. The sheets are (format/layout) structured in the same way. The columns need to get added next to each other in the consolidation sheet.
View 9 Replies View Relatedhow to make all cells displaying an item from the list source update with new information added to list source.
Example:
Cell "A1" on worksheet 2 displays the 3rd slot of information from list source on worsheet 5. I want cell "A1" on worksheet 2 to update when the list source information in the 3rd slot on worksheet 5 is changed.
Notes:
The list is set up by naming the columns on Worksheet 5 and is set as a validation list on the other worksheets. So on Worksheet 2 column "A" has the validation
VB:
AutoLinked keywords will cause extra spaces before keywords. Extra spacing is NOT transferred when copy/pasting, but IS if the keyword uses "quotes".
List=(Coulumn A 's name on worksheet 5)
I have a workbook with 6 worksheets inside; One of the sheets is a master list; it's simply the other 5 sheets compiled into 1 big one. I need to set it up so that any new data entered into the 5 separate department sheets is automatically entered onto the master sheet, in the first blank row.
The columns are the same across all the sheets. Hopefully this will be easier for the pros here than it's been for me, I've been banging my head against the wall on this one. I'll be checking this thread religiously, so if you need any more information just let me know...
I have a master page with A1 containing the names of staff members and then 5 columns indicating preference1 .... preference5. Each preference column will have one 4 digit site code i.e. 8156 entered. I will have 64 worksheets matching all potential 4 digit site codes that could be entered in the preferences columns.
SAMPLE - one staff member entering 5 site codes (A1 to A6)
Billy Bloggs - 8124 - 8456 - 8456 - 8123 - 8882
What I am looking for is a way to autocopy the persons name to the appropriate worksheet and into the correct preference column as I enter the 4 digit code against the staff members name on the master sheet.
I have attached a copy of the chart and data. My chart starts on the bottom. I had to take out a lot of data but beneath the data shown is much more data..
I want my chart to automatically update when new data is added. Here are the issues. I have several lines of headers and below that my data. Then below my data I have other data that I don't want displayed in the chart (its not shown here because of size limitation of attachmnet).
The new row will be added each time right below the header, right above the
most recent data given. So a row will be added above row 8!
I have a pivot table I am try to update. The table references another tab where my data sheet exists. If I add data to the datasheet how can I get my pivot table to recognize the additional information.
View 3 Replies View RelatedI have attached a sample workbook to show my layout.
I need to link multiple sheets (but not all, just certain ones) to one "master sheet". More specifically I need to link only certain colums from each certain sheet. The sub sheets have detailed information, but I only want basic information on the master sheet like FirstName, LastName, Ext, Buyer#, etc Not every column from the certain sheets is needed.
I need a way to update this master sheet when I update the sub sheets manually. So if I add a employee record to a sub sheet, the master sheet is updated. These updates aren't often, so running a macro to rebuild the master sheet after I manually delete it wouldn't be out of the question, whatever is convienent.
In the attached worksheet, I believe there is a sheet called Items. I don't need any information from that sheet at all to be on the master sheet so it can't be in the array when the master sheet it built from the sub sheets.
How to get updated data from connected 3 XL workbooks.(files)
1= ODBC connection ( This brings data from a Basis Query) it will updated 1 or max 2 times a day.
2= Manuel input ( It will update after inserting new data, many times a day) Password protected
3= This One is my master file which brings data in 2 different sheets from above mentioned files. Password protected
My problem is started when i want to see latest updates from file 1 & 2 in my Master file then i have to re-open my Master file, Is it any option which fulfill my requirement that i will keep my main file update just by clicking <save> & I will not re-open file at all times ?
I can't have a shared file. & my all these 3 files are in the same folder.
simple Formula used to bring results are =[Book1]Sheet1!$A1
I have a workbook with 7 different worksheets (site_worksheets) containing data about various sites. I need to copy all this data into a single worksheet (worksheet_a). I want worksheet_a to update itself when another row of data is added to any of the site_worksheets.
View 12 Replies View RelatedI am trying to take a workbook with 10 worksheets and have the contents copied and pasted into a new worksheet without any extra blank rows onto a new spreadsheet. Does anyone know how to achieve this? The purpose is to copy the information off each of the 10 worksheets and be able to use the consolidated information for pivot tables.
Important Facts:
- Each worksheet starts with data in cell A7 and ends at BL7
- The number of rows on each worksheet is inconsistent (e.g. one sheet ends at row 12 another at row 101)
- The columns have uniform titles and data below
I have a worksheet that was created by converting a pdf file of 40 pages or so. The conversion process created 40 separate worksheets in one workbook. I would like to consolidate all the data on to 1 large worksheet.
View 9 Replies View Relatedhow to consolidate all data from all worksheets into a single worksheet(master sheet)?
Untitled.png
In the attachment, data for worksheet 1 will be added to the masterlist and worksheet 2 will follow.
I have a column line chart to which I add data monthly and then have to manually update the "source data" to reflect the added data on chart. This is a rolling graph, which mean that I have to remove data for one month(from last year) and then include the new month's data. Is there any way on automating this process...like a macro or something, so once I add the data excel automatically removes one month of old data and make changes to include fresh data. Eg Currently chart is based on data from A2:F2 and I add new data to cell G2. I need something which automatically update the source data to cell B2:G2.
View 4 Replies View RelatedI am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
View 1 Replies View RelatedI have a workbook composed of many worksheets with varying names. Of the 40 or so worksheets, 25 of them contain data that I need to copy and consolidate into a master summary sheet within the same workbook. All of the sheets I need to grab data from have a worksheet name that ends in “(Data)”. All worksheets contain data that starts on the same row (row 8) but the number of rows of data will change daily. When I copy the data range on the individual sheets I do not want to copy the header row. I’ve tried various uses of the offset command with no luck to resize the selected range. I’ve also tried giving each range a named Dynamic Range and referring to this name in VBA code but that didn’t get me very far either. So the flow looks something like this:
1. Find all sheets with name ending in “(Data)” (i.e. “Project X (Data)”)
2.For each sheet found, find the data range and omit the first row of data.
3.Copy selected range.
4.Go to sheet “Master” and find the last row of data. Move down one row to the first empty row and paste copied range.
5.Go to next sheet and repeat.
I'm trying to consolidate data from many worksheet to a master worksheet. So far, thanks to the help of some experts, i've got this code. But i need to tweak it further to suit my requirements.
Sub CopyDataToConsol()
Dim Sht1 As Worksheet
Dim Sht2 As Worksheet
Dim SrcRg As Range
How can i tweak the above code to:
1) copy the lastest updated row to the Master sheet, instead of copying the whole set of data over and over again..
2) automate it by using worksheet change?
I have a file that will have a maximum of about 25 tabs in it. They are all the same format - Column A have account codes, Column B have the account name and Column C through to Column AD have figures. Column B has a drop down menu, so not all tabs will have the same account code on the same row.
I thought that I would create another spreadsheet in the file and call it a master sheet with the same formats as all the other tabs but this master file will have all of the account codes available and will not have a drop down menu in column B. What I wanted to do was consolidate all of the 25 tabs in the master sheet.
Example Worksheets
TAB 1
Acc Code Desc Amount
1________a___10
2________b___10
TAB 2
Acc Code Desc Amount
1________a____10
2________b____10...........
how to consolidate multiple workbooks into the master workbook? I need to consolidate 12 workbooks into the master workbook every month. The subsidiaries will report me their figures monthly. Hereby attached one of the subsi, "B Co" reporting package, and the master copy "XYZ Holding Co" how it look like. Hence, may I know how to write a macro so that it will auto update monthly when the subsidiaries return me their reporting package, so that I can auto update in my master copy for tab BS and tab PL.
View 6 Replies View Relatedi have a worksheet that has information filled in columns A-N and rows 3-7262 (not including title and labels)
i need a macros that will separate this data into multiple worksheets based on the word in Column A; these words could be HDA, CCR/NHT, GRU/ATU (essentially dividing this data up by area name, there will be 14 worksheets)
i would also like to be able to update this master worksheet and have it be reflected in the multiple worksheets that are divided by their areas.
Worksheet 2 is the master file and contains various information. Worksheet 1 is the input sheet. If Column A sheet 1 matches Column A sheet 2, copy data from Column B sheet 2 and input into Column B sheet 1.
I have never really used VBA and so am completely stuck at this problem. I need to create a macro which auto-populates a master worksheet from the individual user sheets in a shared workbook. Sheet 1 is the master sheet "Team Stats". There will be an undetermined number of individual worksheets to accomodate new staff. Each worksheet will be identical, using columns A-I with row 1 having the headings:
Date, Name, Reference, Value, Price, Age, Purchased?, Destination, Add. Products (the last 3 columns will have a drop-down list which will be used to enter data into the cell). There will be a varying number of rows in each of the individual sheets. If possible I would like the macro to run every time data is entered into one of the individual worksheets. If this is not then it would be fien to update every time the workbook is opened.
I have a report(Input report) with multiple sheets with different worksheet names.
Now I have to select 2nd worksheet of input report and copy a certain range values and paste in the other workbook(output) . From the same sheet 3 diffrent values I will copy and paste in other work book.
Now, I have to come back to the input report and go to next sheet and copy the same range data and append to the out put report below the first sheet.
This I need to do for all worksheets for the input report worksheets (there are more than 100 worksheets)
[code here]
VB:
Sub testtest()
'
'
Dim ws As Worksheet
[Code].....
Each salesman has an enquiry log / hot prospect sheet that they are responsible for.
At present at the end of the month our receptionist has to consolidate this information manually onto a master sheet.
I would like to create an automatic master sheet that auto updates each time it is opened.
It has to read data from about 13 work books each with varting amounts of date. All works books are formatted identically (or they will be)
I have a workbook with multiple worksheets. Each worksheet is a set o data from a certain year. I want to create a macro that automatically copies the data from these worksheets into a master worksheet that can easily be used to make a pivot table.
View 3 Replies View RelatedI have tweaked this code in order to accomplish my requirement. I have in all 35 worksheets in a workbook. Out of 35 sheets, 31 worksheets are infact the 31 days of the month starting from 1st July to 31st July. What I want to do is copy and append all the rows in column A (starting from row 2) of all these 31 worksheets into one master worksheet. Basically, appending the rows in col A from all the worksheets together in master worksheet.
Sub append_master_sheet()
Dim wAppend As Worksheet, wSheet As Worksheet
Dim LastRow As Long
Set wAppend = Worksheets("Master")
For Each wSheet In Worksheets
If wSheet.Name wAppend.Name Then
LastRow = wAppend.Cells.Find(What:="*", After:=wAppend.Range("A2"), _
SearchOrder:=xlByRows, SearchDirection:=xlPrevious).Row
wSheet.UsedRange.Copy Destination:=wAppend.Cells(LastRow, 1)
End If
Next wSheet
End Sub
This code when run gives me a Debug error "Object variable or with block variable not set". I did a research for this error on Google and most of the answers are in reference to using ADO Recordsets. I am not even distinctly using a Recordset in this example.