Adding A Baseline In Graph
May 31, 2007how do you add a baseline in a line graph? the excel book i have says nothing on doing that.
View 7 Replies
ADVERTISEMENT
Calculate A Baseline Formula
Oct 1, 2006I am trying to calculate a baseline average sales formula skipping weeks were there was a promotion. The maximum weeks = 8. In my table, promotions are indicated by equal values in the promotion column (C) and weekly sales column (A). If there was no promotion a 0 is in column (C).
Beginning the formula in cell B10, If A10<>C10, average A10:A2
If a11 = c11, average A10:A3 ( move up a cell in Col A and average that cell with the preceeding 7 numbers).
=AVERAGE(IF(A10<>C10,A3:A10,A2:A9))
However, if another value in A equals the corresponding C values within the averaging range (i.e. A8=C8), I want to skip "A8" in the average calculation and include the next cell outside the range (A2 or A1). In other words, I want to average a maximum of 8 preceeding entries in Col A that meet the criteria A<>C.
Adding Line To Bar Graph?
Jan 20, 2014I am trying to recreate the screen grab that I have copied and pasted in (purple bar chart). I am to create the bar chart, but I am unsure how to create the dotted line which is the national average.
View 3 Replies View RelatedAdding Incremental Data To Column Graph?
Jun 18, 2014Anyway, I have a column graph that shows company totals on the left, in three columns, and sub-group totals to the right. These columns represent Revenue Targets (Blue), and current projections (Red) as of the current time. Ignore the green column. I would like to add incremental amounts to the Red column weekly, as the projections change. So I want to show an increment on top of the red column.
So if LG picks up 100 of additional revenue, I want to show the increment of 100 on top of the 2000 that is there, using a different pattern or cross-hatch.
Select Series (lines) In Line Graph By Adding Userform With Checkboxes On A Chart
Apr 15, 2014I want to add a user-form on a chart, which will have check-boxes that will allow me to select series(lines) that I want see and compare in a chart. Currently my line chart has 24 series (Lines) which makes the chart very difficult to view and looks very busy. How do I add list of check-boxes that will allow me to select one or multiple lines that I want to see at a time?
View 2 Replies View RelatedMake A Scatter Graph That Will Graph The Attached?
Mar 21, 2014I would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.
View 7 Replies View RelatedMake A Graph That Will Graph Against Time
Jun 11, 2006How can i make a graph that will graph against time? lets say i have a bank balance like this:
1/2/2000 $500
1/3/2000 $600
3/12/2000 $400
there may be more than one entry on any one given day, or there may not be an entry for 2 weeks. How can i graph the running balance in a way that it will show the timeline just as a calendar year(or however long i selected) and the points are plotting according to their date, not just equally spaced out.
Line Graph: (line Graph To Display An Amount Over Time)
Dec 30, 2008I want to use a line graph to display an amount over time - that's the easy part. On the other hand, I would like to have to group the lines based on a value.
A short example:
Imagine you own 3 different stores and you're selling oranges. So your table looks like this:
http://img179.imageshack.us/my.php?image=orangeshm4.jpg
Now I'd like to have one graph (3 different graphs won't work as the rows increase -I need to select the whole column as data source):
Date on the x axis,
Oranges sold on the y axis,
and one line per store (e.g. a green one for store A, a red one for B and a blue one of C, doesn't matter).
Adding Time: Adding Individual Cells Works, But SUM Doesn't
Mar 28, 2008I have a column of times: e.g. 10:03:00 and I would like to add them all up.
=A1+A2 works fine.
=sum(A1:A10) does not.
Adding Dim'd Variables: Ignoring Strings & Adding Number
Jan 13, 2007I've got a problem involving several Dim'd Variables needing to be added up, they're all Dim'd as Variants though as they can be either strings or numbers at any time.
I need a formula (VBA) to add them up (to add their actual numeric values - not just a "1" if they contain a number) and ignore them all together if they contain string values.
Adding Data With Userform: Check For Duplicate Before Adding
Feb 14, 2007I have a userform that I'm using to add data to a worksheet, with the following
Private Sub CommandButton1_Click()
Dim OutSH As Worksheet
Set OutSH = Sheets("Sheet1")
OutSH.Cells(nextrow2, 1).Value = Surname.Value
OutSH.cells(nextrow2,2).value = ID.value
OutSH.cells(nextrow2,3).value = Date.value
......
I need to ensure that duplicate entries are not made for the same person on the same date. The ID is unique to each person.
IF statement that can check for a duplicate and then come up with a dialouge box with some custom text, and then exiting the sub?
Adding Values In Cells (stops Adding After Row 14)
Oct 1, 2009I am trying to add numbers from cells if it IsNumeric and for some reason in column K the macro doesnt recognize numbers after row 14?
The range column is "E4:E"
Search criteria is the letter "R" in column "E" Then using OffSet, I go thru other columns and process data. Most of the macro works except for column K after row 14?
Adding Measurements Together And Adding Letters After Totals
Dec 18, 2011I am needing so I did it as a picture. (Please assume "Day 1" is A1)
View 7 Replies View RelatedX-Y Graph
Nov 11, 2009I have a X-Y graph with 602 data points. My x scale is a counter from 1 to 602 and the Y is a decreasing set of numbers. When I hover my mouse over the points on the graph (I zoomed the graph) My first 3 points are all labeled as Point "1". At the end of my graph, my last 3 points are labeled 599,601,602, it skips 600.
I am using Excel 2007. Has anybody seen this before?
Getting Decimals To Appear On Graph?
Jul 17, 2014I am creating a graph with a wide range of values (0.06 - 300). The smaller values are barely visible on my column graph. I have tried all of the tricks I know. Any way to get the smaller values to show up instead of just hovering towards the bottom of the graph?
View 9 Replies View RelatedSet Up Graph With Dates
Dec 27, 2013I need to set up a graph (smooth line chart possibly) with an (x axis) that are not regular intervals. I've attached an example.
the amounts would be (y axis) and the corresponding dates (x axis).
That would be great to start with. Then I have one of these sheets for each month, can there be a continuous graph made using each month or does it need to be individual graphs.
Davyccexamp1.xls
How To Get Quadrant Graph
Jul 22, 2014I want to plot a quadrant graph as in the attachment, but I can't find them. how to plot them.
View 2 Replies View RelatedPut The Annotation On The Graph
Feb 27, 2007I need to create a graph using the data in the following format:
Item X Y
A: 10 100
B: 20 200
C: 30 300
D: 40 400
E: 50 500
etc.
I need to annotate points with A,B,C etc in the scatter plot so that the same can be quickly identified in the graph.
Scattered Graph ..
Feb 16, 2009I have three colums of data.
First represet company , second colum represent data1 ( x- axis) and third represet data2 ( y-axis).
I want to plot x-y graph with the company name
Eg.
McDon | 10 | 20
In the above case i want to show a round circle or dot which will be 10 right on x axis and 20 up on y axis and near the dot i want to show McDon as company name.
See that attachement... Graph is coming well.. but i am not able to add the company name to the dots.. or pot of x and y intersection
Grouping In A Graph
Jun 16, 2009I would like to create a graph where the numbers are grouped in such a way as all numbers between 0 and -1 are shown in one column, all numbers between -1.1 and -2 are shown in the next column, all numbers between -2.1 and 3 are shown in another column etc
The numbers are shown below
11/03/09
-2.5
-3.8
-3.9
-4
-4.1
-4.5
-4.6
-4.9
-5.2
-5.4
-5.4
-5.5.......
Graph Plotting...?
Jul 12, 2009I use spectrometer in my reesearch. The datas are in (a, b) format in single cell. Is it possible to seperate a and b seperately? like a in seperate cell and b in seperate cell?
View 4 Replies View RelatedOne Graph Three Variable
Feb 4, 2010I want to carry out a survey in Sept, Oct and Nov. I will asking 1000 random people in each survey what is their personal favourite--- iPhone, Nexus or Blackberry. Counts of each phone type is then divided into male and female.
Now we have three variables: gender, phone type and month. Is there any way I can present 3 variables on X, Y & Z axes and the value at their intersection as bubble size (or colour gradient)? Theoretically it's possible but I can't find a way to do it in excel. Or anyone knows any software that can get the job done?
Graph Next To Items
Nov 29, 2012See attached sample file. Any way to get column graphs next to each item (horizontally), each column being the revenue for that item.
Attached File : Sample.xlsx
Dimensions Of A Graph.
Nov 25, 2008My macro prduces some text ang a graph on the screen and I can print the result.
Ok so far. But when I run this macro in a different screen resolution, the layout of the page is disturbed: the graph is on the wrong place and the dimensions of the graph are different.
Of course I can drag and resize the graph and include this proces also in the macro but I think this is not the right way. My question is: are in VBA commands which can fix the graph to a location on the sheet/screen and adjust the graph to the requested heighth and width?
Show A Tab With A Graph
Aug 31, 2009I know that to show a tab in VBA you can write worksheet("NameOfTheTab").select
However, it does not work when the tab is just graph.
How To Create N1.85 Graph
Sep 28, 2004Trying to create an N1.85 graph in Excel that has irregular spaced tick marks on the X-axis. Found the following information but no luck with it. Need US measure for this semi-log (10 X N1.85) graph. Also called a semi-expo (Q1.85) graph.
The resulting graph appears to be a log graph in reverse with one scale; the column widths are smaller at the left and become larger as they progress to the right.
Info found:
A 1.85 graph can be constructed manually by establishing a series of 15 values (in the case of the example in D5.2.1) from a base measurement to the exponent of 1.85.
Step 1
Select a base measurement for the desired size of the graph. A base measurement of 1.0 mm will produce a graph to 15 which is approximately 150 mm wide; a base measurement of 1.5 mm will produce a graph approximately 300 mm wide. In the case of a 1 mm base measurement, the x-axis numbers will be the 1-15 series. In the case of a base of 1.5 mm, the numbers will be represented by the series: 1.5, 3.0, 4.5, 6.0 etc. for 15 values.
Step 2
Construct a series of columns to the 1.85 exponent values measured from the zero point. The rows representing the pressure values are linear.
NOTE - A good approximation of the above can be computer-generated by a spreadsheet programme by entering a column width established from the exponential figures by subtracting the preceding value in each case. The column dimensions are displayed in the number of standard characters able to be accommodated in the column width which is slightly inaccurate in linear dimension.
The figures below indicate the values for a graph based on 1.0 mm.
Linear scale Exponential value of linear values = Column width = linear values to 1.85 power exponential value - preceding value
1 1 1
2 3.61 2.61
3 7.63 4.03
4 13.00 5.36
5 19.64 6.64
[Code]....
Creating 3D Bar Graph
Feb 10, 2013I want to create a graph as showed below.
Actual graph will contain a larger/longer X-axis (40 instead of 6 readings), but no more than 2 rows af data (A and B), of which one has a seqenced number af data (row B).
Row B alo has got singular points of data superimposed over the cylinders.
I have got all the numbers ready, but I don't know whether or not it is even possible to create a graph like this.
The cylinders have values up to 45.000 (accumulated in row B), the points (black dots) go from 2 to 6.
If so, I'm having trouble selecting the correct template out of the excel's standard list of graphs.
Graph X And Y Not Working
Jun 5, 2013I have data refering to acceleration of a motorcycle. it uses a calculated value representing acceleration.. each value only relates to the one before and after it, and has no real world value example:
RPM 3000 = .1169 acceleration 4000 = .121 5000 = .131 6000 = .141
Now i want to compare my acceleration vs my real world speed based on each gear, below if first gear.
RPM 1497 = 15 kph 2994 = 30 kph 4491 = 45 kph 5988 = 60 kph
So the one axis is common but the values are not equal to one another and how to get the graph to show RPM vs speed and acceleration?
Bar Graph Not Starting At Zero?
Jun 5, 2014I'm working on a stacked bar graph based on the below info...
Min
Mid
Max
N1
$21.00
$30.00
$38.00
[code]....
I'm trying to adjust the starting point so that it does not start at 0.
For example...
N1 - $21.00 - $38.00
N2 - $26.00 - $45.00
N3 - $30.00 - $53.00
is there a way to do this?
Graph - Hide If 0
Feb 22, 2007Is there a way you have a graph auto-hide if the data its pulling in equals 0?
View 9 Replies View Related