I have data in several (50+) columns. I want to be able to sort all my data by the column I select with one click. So, I basically want a button over each column that sorts the data by that column. It would be ideal to have the same "Sort" macro that is attached to all the buttons. The macro should somehow know that the column the button is in, is the column to sort by.
View 9 RepliesI would like to have a button or a link on my spreadsheet that when it is clicked will sort my table with a pre-defined sort.
View 3 Replies View RelatedI am trying to create two macros. The first macro will add a button, and the second macro will delete the button. I am noticing that when I add the button in the first macro, Excel is automatically naming the button (i.e. Button 26), and then when I try to delete the button with the second macro, this button name is not recognized. How can I name or set the button as a variable so that I can successfully run these two macros?
View 6 Replies View RelatedI'm trying to add a sort button to a list where I choose which column to sort. Attached is an example. Can this be done without VBA? If not, is the VBA easily editable??
View 2 Replies View RelatedI have never recorded a macro before and what I want, I think, is pretty simple but I can't figure it out. I want a sort button that sorts all information ascending by column B. See attached spreadsheet.
View 8 Replies View RelatedI have a code with perfectly sorts Excel rows when you click a button:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Range("C1:S70").Select
Selection.Sort Key1:=ActiveCell, Order1:=xlAscending
End Sub
but if i like to sort the columns by Row 1 how i can do it?
I guess I have a simple question, i want a command button in excel which does the following:
first time pressing button: Cell A1 + 1
second time pressing button: Cell A1 + 2
3rd time pressing button: Cell A1+3
etc.
I have a table with headings for each column.
How can I make the columns headers buttons/clickable, so that it sorts the rows on the column that was clicked upon?
I have a sheet name "all" Sheet 15. What I want to do via VBA is sort range B4:I803 sort by Column G (ascending) then by Column H (ascending).
Have this sort activated by a command button or once the WB is saved then activate the sort prior to saving. The former is the preferred but if it's not to much trouble with coding then the former and latter solution would be great.
I have a row of sub-headings at row 12 that require Sort Filters. My problem is that I need the filters on selected columns only. It seems that with the standard filter button I get all or nothing.
View 8 Replies View RelatedI just stuck on the basics. I want to add a new sheet through a macro and a button in the same. I am unable to make it dynamic. it is giving me an error:
I have a form that allows users to browse for a file so the location can be stored in a cell. When they select a file the form then creates another area so people can browse for another file. (Similar to an attach a file on an email)
The problem I have is that when I create the next button I don't know how to add a _click event to it.
I have a monthly log that I need to keep to track expenses and customers visited. The log is segmented into 12 parts corresponding with each month.
I need to be able to add multiple lines via an input box while maintaining the formulas and formatting of the 2 rows directly above the forms command button (because both lines are filled with a different color) but not the contents?
There will be 12 command buttons in all and the new rows should be added at the bottom (directly above where the button is)
I found this and it works to some extent.
Sub FromFormsCommandBar2()
Dim Btn As Button
with ActiveSheet
Set Btn = .Buttons(application.caller)
btn.topleftcell.entirerow.insert
end with
End Sub
I have built a Form which displays data from a spreadsheet. The user opens the form by clicking on a command button from the spreadsheet. The Form initially opens with the data from Row 4 of the spreadsheet (because this is the first row of the spreadsheet which contains the data for the form). The user can then sequentially access other rows in the spreadsheet by clicking on buttons in the Form which advance the extraction by one row.
I would like to add a command button to each row of the spreadsheet that would open up the Form and set the values in the Form to the same row which the command sits on.
I have spreadsheet with some very basic formulas that work out sale prices based on people entering buy prices. (It works out the % margin). There are certain areas where the user enters the data - and does not touch any other part of the sheet.
What I am trying to do is add a button which will remove the data from these cells. Almost - a start again button or refresh button. This way it will remove previously entered data - without removing formulas from the cells where the calculation happens. So basically there are cells that a user will enter data - and it is these cells I would like to be able to clear with a button or similar without affecting other cells.
I have added a button to asign a macro to but for the life of me cant see how to "activate" the button. I am trying to click the button to make the macro run but it keeps selecting the button like it wont come out of design view.
View 4 Replies View RelatedRunning excel 2003 and have a number of sheets where i want buttons along the headings to sort a selection of rows.
For Eaxample one sheet i have data in range A6:AD135. i would like to assign a macro to various buttons on row 5 to sort by that column ie button in column b sorts all data in the range by column B.
I need code to attach to a button!
In cell A1 I enter number of teams.
In Cell A2 I enter number of games to play.
Is there a way for me to click a button and...
In columns A and B it will give me a list of teams to play each other
based on the criteria above.
In Column A will be home team and B is Visitor.
Example I enter 9 teams with 12 games to play, hit the button and it will list the games in columns A and B.
I've made a file with 4 active sheets.
Form - to submit the data of items incl 2 buttons to add the data in 2 sheets and 1 email button wich is active and working.
I would like when the data is been added in the form cells that when by example when i push the button for new assets these data in correct order be placed in the new asset sheet horizontal and in the right column. Not with a pivot table i need to keep the layout of the top line in new asset sheet as it is by procedure.
Same for the asset disposal button and sheet.
My excel version is 2007 and i am on WIN7 64bit
I have a workbook with VBA which was working fine earlier. Lately i have been getting
"Runtime error 1004" Select method of button class failed.
I am adding buttons dynamically in a loop in a sheet and what surprise me is , i go to debug mode when error pops up and it points to below line
MySheet.Buttons.Add(ActiveCell.Left - 5, 25, 20).Select
but my code is running in a loop and i can see that atleast 20 buttons were added and it fails to select when it try to add this iteration. It is completely confusing me.
My entire below code is in a loop
maWrk.Cells(xIt1, yIt2).Select
mySheet.Buttons.Add(ActiveCell.Left - 5, 25, 20).Select
Selection.OnAction = "callMe"
[Code].....
I also notice that when it fails, on select method .. the button was actually added to the sheet with caption/name as "Button 65536" but then fails to select it. What makes the select to fail after adding the button? Could there be anything special with Button 65536?
Is there any better way to code the adding button and setting action and name for excel 2007?
note before entering the loop i am deleting all the shapes with myShape.Delete which name matches "btRun"
I have a macro which I use to do all sorts of routine things on a spreadsheet for my employees. (you guys helped me with that too. thanks)
I would like to add a command button to this sheet to run series of code and I want to add this to the final step of a macro.
Question, is there a series of code, which would
1. create the command button on the active sheet, and
2. add the required code to the command button, and
3. embed that button and code onto the active sheet all at once.
?
I need to do this regularly so it is a currently manual process I am trying to replace.
Ex. of code I want placed:
Rows("1:1").Select
Selection.Font.Bold = True
This is not the exact code which I will use, but it will help me to understand what I would have to do to make it work.
I have a user form with combo boxes. The user selects items from the combo box and when they click the command button the selection is written to the spreadsheet. Each time the button is clicked it adds an item to the sheet making a list of items. I am trying to assign a number to each item when the command button is clicked so I have numbered list. Here is my code so far:
Private Sub cmdbtnAdd_Click()
Dim RowCount As String
'Writes user inputs to Active Worksheet when Add Item Button is clicked.
RowCount = Worksheets("Sheet1").Range
("A1").CurrentRegion.Rows.Count
With Worksheets("Sheet1").Range("A1")
.Offset(RowCount, 0).Value = ' This is where I have been trying to code in the numbering
.Offset(RowCount, 1).Value = Me.Combobox1
.Offset(RowCount, 2).Value = Me.ComboBox2
End With
End Sub
I am working on a simple employee list with names, phone numbers, employee ID numbers, etc. I have created a VBA form to make new entries or change existing entries. The form has 'next', 'previous', and 'close' command buttons that work well, but I would like to have my data sort by employee name after any of the buttons are clicked.
My data is in worksheet "Employees" with employee names in column A beginning on row 2. Here is what I have entered for the 'Next' command button:
CASH BK
CASHIERS
DATE
CASH
TOTAL
DIFF
SALES
GBP
AR
GBP
AR
GBP
[code]....
above is the sheet template we use on a monthly basis. I would to like to use a command button which will run a macro creating a new sheet with the sheet name each month. The idea is to have a text box and a command button,enter the month in the text box and click the button. A sheet for the month to create at end.
I'm adding a command button at run time using excels help code;
Worksheets(newWorksheetName). OLEObjects.Add ClassType:="Forms.CommandButton.1", Link:=False, DisplayAsIcon:=False, Left:=325, Top:=24, Width:=50, Height:=20
I want to change the buttons properties including its caption etc.. I've tried using'
Worksheet(newWorksheetName).OLEObjects("CommandButton1").Caption = "Do"
But i get a run time error. Also, the add method doesn't specify what the button is called, any clues?
I already have a Macro button built that hides values in column A. The next step I am trying to perform is a custom sort on column B in this order "Backordered", "Sourced", Shipped", and "Received". Here is my code that I have so far but where to begin adding in code to make this button sort.
Sub Inbound()
ActiveSheet.Cells.EntireColumn.Hidden = False
ActiveSheet.Cells.EntireRow.Hidden = False
Application.ScreenUpdating = False
[Code] ........
Excel 2007/Windows 7
I'm verrry new to editing VBA code and I've been trying to figure out how to send a column of data ("Min Data" AB3:AB21 from "Sheet1") to a worksheet ("F4" - Min) and sending another column of data ("Max Data" AC3:AC21 from "Sheet1") to a different worksheet ("F4" - Max) by using only the one button ("Record Data" from "Sheet1"
I've been trying to figure out ways to edit the VBA in "Module 1" to make this work
Can anyone help me out here? If what i'm asking for isn't clear enough, just let me know and i'll try to explain in more detail.
I have a userform for inputting information to a spreadsheet using the code below. It works fine however if the user does not select a radio button to select a score its saving the rest without it. How can I ensure the user selects a score,,,, ob10, ob8, ob6, ob4, ob2, obna.
[Code] ......
I would like to make a userform where additional textboxes (and labels) can be added to the form by clicking a command button. Is this possible to do?
For example, a userform which has:
Contractor 1: (TextBox)
and underneath this have a command button which when clicked will add another text box e.g.
Contractor 2: (TextBox)
I'm new to vba so haven't got a clue how to go about making this userform or even if it is possible.
Instead of having the goals and objectives already in the form I would like to have buttons that would allow my clinicians to add as many goals and objectives as they'd like to the attached treatment plan. I'd like them to be able to click a delete button as well when they review the plan and need to delete a goal that's been met. When my team clicks into the second worksheet they would see rows 10-16 (below). They would then type a STG 1 and an Obj A. They then would click the Add Obj button and add as many objectives that they needed. Then when they clicked the add goal button a blank copy of rows 10-16 (including the Add Obj button) would pasted one row down and would update to read STG 2. Neither of these buttons would appear when the document printed.
Here is a screen scrape of what I'd like the attached form to look like before goals and objectives are added.
add goal.jpg
The original form is saved in an .xltm format but I saved it in an .xlsm format so I could upload it here.
HCT ITP (2-25-14) Abbr.xlsm
I found a thread on this forum that came close to answering my question but my attempts to pull out the coding that I needed was unsuccessful. Here's a link to the thread: [URL] ........