Adding Specific Values In Different Columns Using One Formula?
Mar 28, 2014How would I go about finding the "Number of Shirts Ordered" values in the top right?
View 1 Replies
ADVERTISEMENT
Adding An Auto Filter On Specific Columns Of A Worksheet..?
Dec 14, 2007How do I go about using adding an auto filter on specific columns of a worksheet..?
I.e. I want to auto filter column "D", "G" and "I" but none of the columns in-between ("E", "F" and "H")
Currently I can only create the filter for one column or a group of columns that are next to each other)
Looking Up A Sum Of Data In Several Columns For Specific Values Of Another Column
Jan 28, 2010=(SUMIF($J:$J, "Player1",$K:$K)+SUMIF($L:$L,"Player1",$M:$M)+SUMIF($N:$N,"Player1",$O:$O))-SUM($I:$I)
This looks up if Player 1 was in the top 3 scoring zones and adds up the players total score.
I have another column in this table of data labelled 'Number of Players'. I was wondering how to lookup the total score for this player in the games he played under 6 players for example and the games he played in where there were other six players.
I've tried using that formula ^^ with variations of IF and SUMIF formulas to try and figure it out, but I keep getting formula errors or it just returns with the total score, and not just with the total score under 6 players.
I am also trying to create a graph of date on the x axis against score to date on the y axis - everytime I try, the x axis is always numbers instead of the date?
Identify Which Rows Have Blank Values In Specific Columns?
Feb 19, 2013I have a spreadsheet with columns and columns of data. What I'd like to do is identify which rows have blank/no data in all specified columns (H, K, O, S, U, W, and Y).
To clarify, I need to identify each row where all of these columns are blank (as opposed to each row where at least 1 column is blank).
Identify Values Specific To Defined Groups Of Columns?
Sep 2, 2013I have these kind of matrices (below) and I'd like to identify unique values specific to different groups of columns:
[Code] .........
For instance, in the example above, if we decide that A, B, C are "Group 1" and D, E, F are "Group 2", and that the values in rows 1, 2, 3 are independent (i.e., "x" in "1" is not comparable to "x" in "2", etc):
- In condition (row) 1: "x" is a specific value only found in Group 1
- In condition 1: "y" is a specific value only found in Group 2
- In condition 2: "x" is a value found in majority in Group 1
- In condition 3: no specific value can be associated to Group 1 or 2.
What I would like to get is a measure of whether:
(1) there are values over-represented in one of the groups, or 100% specific to one group.
(2) what are these values
(3) if multiple values are a bit tricky, then: what is the value which is the most over-represented in one group compared to the other (the maximum being 100% in one group and 0% in the other)
Creating Formula - Adding Values (best 7 Of 10) With 4 Mandatory Fields
Jun 22, 2014i need to create a formula to calculate rankings for a race series. there are 10 events in the series, only the best 7 individual results count. and there are 4 events which are mandatory and must be included in the rankings. sample attached.
View 3 Replies View RelatedCounting Formula (compare Values In 2 Separate Columns To See How Many Times The Same Value Appears In Both Columns)
Oct 13, 2008I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
ID 1ID 2
12342122
45671112
89101718
11122678
13144544
15162324
17189987
19201215
21221928
1976
2576
2345
4678
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
Difficulty Adding Minimum And Maximum Values To Existing Formula?
Mar 12, 2014I'm currently using the following formula to return values rounded down to the nearest 2.5: =FLOOR(X8*1.25,2.5)
This works fine but I would like to put in place a system where if the "X8" value is 1 the formula produces a 2.5, and if the "X8" value is 10 or greater the formula produces a 10.
Array Formula - Finds Date Then Start Adding Values Until Specified Sum Reached
Jul 23, 2014I have an Excel workbook with two sheets "DataSheet" and "Actual Peaks", "DataSheet" contains a column with dates and a column with values. "Actual Peaks" has a bunch of dates listed in a column. For each date in 'Actual Peaks', another column goes back to the "DataSheet" finds the date, then starts adding values until a specified sum is reached, once the sum is reached, it returns the date at which the sum was reached. However, I have found that sometimes it is off by a day or two.
See the attached workbook for a much clearer example : Excel_forum help 7-23-14 DD validation.xlsx‎
Excel 2007 :: Copy And Paste Formula To Specific Columns
Aug 27, 2012I need to copy a specific column range K18:M180 to only columns that have an "X" on a specific row. Below is my small example.
In this example it would be in columns OPQ and WXY
Excel 2007IJKLMNOPQRSTUVWXY
121314xxxxxx1516$Units$/Units$Units$/Units$Units$/Units$Units$/Units
1718aaa180.0 0.00 19bbb0.0 0.00 20ccc1.6 0.11 14.74 21
ddd9.0 0.53 16.93 22eee7.3 0.45 16.22 232425Sheet1
Formula To Copy To Values To Specific Rows
Nov 15, 2009Column A lists an account code on the summary line of each invoice. I'd like to copy this account code upwards for each individual line of the invoice so that I can summarise each type of charge by account code in a pivot table.
I'm a bit stumped as to how to do it. If possible I don't want to have to modify the data itself in any way so that I can paste new data in the each day without altering it.
I've started on the right with a CountA function for each row, which I was intending as a means to identifying the blanks rows and discount them, but it also showed up that each line requiring an account code to be copied returns a 4 and each invoice summary line returns a 9. I'm just not sure how to reflect this in a function.
Search And Extract Cell Data After And Before Specific Values With Formula
May 20, 2014I need a formula to extract data after "<li>Color: " & before"</li>"
A
B
1
ORIGINAL
RESULTS
2
blah blah blah<li>Color: White</li>some informations
White
3
blah blah blah<li>Color: Red</li>some informations
Red
4
blah blah blah<li>Color: Black</li>some informations
Black
5
blah blah blah<li>Color: Red</li>some informations
Red
I have already use this formula but I get the "#VALUE!" error even if the cell contains the "<li>Color: </li>" data.
[Code] ....
Sometimes, some cells does not contain the "<li>Color: </li>" data, I don't want the "#VALUE!" error, I just want a blank cell there.
This is an example with the real values I want to extract Example.xlsx
This is the formula that works
[Code] ......
Loop Through Sheets And Convert Specific Formula Cells To Values Based On Criteria?
Jan 9, 2011I looking for a macro that will go through multiple sheets & change specific cells to values if the column header is = to value set in specific cell.
for example
I would like the macro to look at row 3 in each tab (page 1, page 2, page 3) and if the value you is equal to X (parameter input on different sheet) then change the formula to a value in row 6 & row 12 of that column.
I'm attaching an simple example that i looking for this on. The green cells are the one i would like to change to a value.
Book1.xlsx
Adding Values In Cells (stops Adding After Row 14)
Oct 1, 2009I am trying to add numbers from cells if it IsNumeric and for some reason in column K the macro doesnt recognize numbers after row 14?
The range column is "E4:E"
Search criteria is the letter "R" in column "E" Then using OffSet, I go thru other columns and process data. Most of the macro works except for column K after row 14?
Adding Values Between Two Dates And Dates Are Also Derived By Formula?
Dec 9, 2013I have attached an excel sheet for your reference. I have particular debit values that are to be added between the dates. And Dates are also derived by formula based of payment term.
The ones I need to modify is Highlighted in Yellow. The values to be added is in "Customer Statement" and in H Column
These dates also have formula by which there are derived
-------------------------Current Ageing-------------------------
Date Range
Bucket
Amount
Percent
Start Date
End Date[code].....
I am USing =SUMIFS('Customer Statement'!$A:$A,'Customer Statement'!$H:$H,"=" & E11) but does not work.
Formula For Determining If Two Date Columns Fall Within Specific Date Range
Apr 21, 2006Let's say I have thousands of employees, but I need to determine who worked for me during a particular date range, and all I have to go on is their start date in one column and their end date in another column.
If:
A1 contains beginning date of employment
B1 contains ending date of employment
C1 contains specified beginning date (criteria)
D1 contains specified ending date (criteria)
Adding Data From Specific Names
Dec 17, 2008I have a sheet that has the same employee names several times in different orders in the same column with data to the right of it. Example
Name.......Pieces...hrs
.....A........B........C
(1)John...1000......12
(2).........2000......20
(3)Jay.....2000......31
(4).........2500.....20
(5)John...2000.....50
(6).........5000.....60
(7)Bill......1200.....40
(8)..........3000.....60
I need the peices and hours total for each name on another sheet. So I would have John on my sheet and would need to to grab and add the info from B2 & B6 into one cell (since it is the same person). I can always drag the info over for hours once I find a way to do this for the pieces I would think. The problem is that I don't want to add in B1 & B2 for John because those numbers are not a part of the total.
So is there a way or formula for one cell to look at the entire sheet and everytime it sees the name john to add the information one column over and one cell down and then give a total?
I may be able to do some formatting and have all the info I need directly to the right. So I would have (A1) John, (B1) Data, (C1) Data. The issue would be a cell finding the name, taking the information directly to the right of it and adding it as many times as the name is found on the sheet.
Adding Specific Prefix To A Column
May 25, 2012I need to add a specific prefix (in this case DR- ) to a whole column. The problem is I have some cell that already have the prefix while others don't. I also have some cell with value N/A and I don't want them to get the prefix either
PHP Code:
___C___
DR-1220Â
1222
 1233H
DR-1220Â
1222
 1233H
[Code] ......
What I need them to be is :
___C___
DR-1220
DR-1222
DR-1233H
DR-1220Â
DR-1222
DR-1233H
[Code] ....
The text need to be search able (no formula ).
Adding Cells Over Specific Range?
Sep 19, 2013I'm looking to easily drag the sum of certain cells in a different column BUT keeping a specific range, it's hard to explain so i'll show an example...
A1
A2
A3
A4
A5
A6
A7
A8
B1=SUM(A1:A4)
B2=SUM(A4:A7)
B3=SUM(A8:A11)
And so on...
Is there any way I can do this by dragging down the cell formula from B1 and it remembering the range of 4, so I don't have to manually select each range...?
Adding From Specific Named Cells
Jan 21, 2009I have 2 columns named "ASC" and "AE" which have total calculations of stores inventory data. To the right of the "ASC" and "AE" columns are store columns with (C1="store#"), (C2="state"), (C3="name"), and (C4:C14="inventory count") totals.
If at anytime a stores "name"="AE", I want the "inventory count" for that store to calculate within the the "AE" column.
Anytime a stores "name"="anything except AE", I want the "inventory count" for that store to calculate within the the "ASC" column.
A1:A3= "ASC"
A4 through A14= Inventory Total
B1:B3= "AE"
B4 through B14= Inventory Total
C1= Store#
C2= State
C3= Name
C4 through C14= Inventory count
D1= Store#
D2= State...
Adding Years To A Specific Year And Then Rounding It Up
Apr 3, 2009There are two columns in an excel sheet, one is date of birth and other is date of reteirment
looks somewhat like this:
D_O_B D_O_R
5-Mar-53 31-Mar-11
30-Jun-57 30-Jun-15
20-Jun-51 30-Jun-09
2-Feb-55 28-Feb-13
2-Jul-51
13-Oct-55
1-Sep-51
7-Jul-54
14-Mar-53
3-Aug-50 3 0-Sep-13
Some of the dates in D_O_R are missing. I need to fill in up all the dates in D_O_R column.
D_O_R is = 58years+D_O_B(NOTE the dates should come as last date of the month)
Adding A Column With Variables For Specific Entries?
Jan 31, 2013I have a table which looks like this:
Name 1 IDNumber Name 2 Name 3 Column 5
Tom20148 John Malmo
Tom20148 Will Malmo
Bob20206 Will Malmo
Tom20206 Will Paris
Bob20206 Rob Rotterdam
Bob20207 John Rotterdam
Ray20207 John Paris
Tom20208 John Malmo
Ray20208 Rob London
Ray20209 Rob Paris
Bob20209 Will Malmo
Is it possible to have excel go through this list and assign each row a number in column 5 based on the names and the IDNumber? Basically, I would want each entry that is identical in name 1, 2 and 3 to be assigned numbers 1, 2, 3, 4, 5 etc based on their IDNumber. So Tom/John/Malmo with the IDNumber 20148 would get the number 1 in column 5, while the next match (Tom/John/Malmo/20208) would get the number 2 in column 5. For each different match of Name 1,2 and 3, I would want the count in column 5 to start at 1. So Bob/Will/Malmo/ 20206 would get number 1, Bob/Will/Malmo/20209 number 2 etc.
Adding Variable To Specific Sheetname In A Sumif Function
Feb 4, 2010Hi, looking for help desperately in fine tuning a formula. I have a formula at the moment (which works) for searching through a list on a separate file and totalling up all values which relate to it, see below:
=sumif([filename.xls]1’!$B:$B,D10,’[filename.xls]1’!$H:$H)
The tab ‘1’ in the formula relates to the first of the month so this month there are 28 different tabs with similar information.
With C10 containing the date in this instance, does anybody know a way of making ‘1’ a variable so that entering ‘04/02/10’ would change it automatically into a 4? (Unfortunately for me changing the 1 to =c10 didn’t work).
Adding New Columns And Moving Old Columns
Jul 19, 2013Using VBA... I have Column N (eFIUnitRebate) which I want to swap with Column M (FFUnitPcnt)
Now with Column M as eFIUnitRebate and N as FFUnitPcnt I want to create an extra column (adjUnitCost) where Column N is and push FFUnitPcnt to become column O, etc.
Here is how the whole process should work:
Swap M and N
Insert new Column in N
Insert new Column in P
Insert new Column in Q
Insert new column in R
There is more information on the sheet after these columns so for all column inserts it needs to push whatever was there over.
So the layout is as follows:
J
K
L
M
N
O
P
Q
R
Units
UnitCost
UnitRebate
[Code] .....
These columns are thousands long, so I would like the formulas for them to be applied to the whole column as well.
Timeline Adding Specific Time Frame In Each Additional Cell?
Jun 23, 2014Rather than manually typing the time in 5 min increments across a range of cells, i want to have a start time, then the next cell add 5 mins. EG: 09:00 next cell 09:05 and so on.
View 7 Replies View RelatedVBA Code For Adding A Specific Worksheet Condition Within Subfolder Consolidation Macro
Aug 22, 2013The issue is the I want to put the condition here in my the code that only copies the desired cells if the sheet is named specifically such as "Jan", if not named as this the worksheet should not be used. The current code I am using was posted on this site in 2009: VBA to copy specified cells from all the files in a folder
My modified code is:
Option Explicit
Public strSourceFldr As String
Public EachFile As Object
Public objFSO As Object
Public objFolder As Object
Public objFile As Object
Public strSheetName As String
[Code] .........
Search Only In Specific Columns (or Ignore Other Columns)?
Mar 25, 2014Find button in Spreadsheet. My problem is I wish to only search 2 of the columns on my sheet.
I have been trying to locate info on my own, see here: [URL]
But I cannot seem to find anything showing how to specify where to search.
Here is the code I am using
[Code] ......
Want to search columns G and J -OR- Search entire sheet but ignore Columns A and B ...
Macro Loop To Extract Specific Values And Min/Max Values From Column/Rows Range
Jun 3, 2009Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
Adding Columns
Dec 16, 2006I wish to have a column of values. It will be dates. There will be a value in each cell (hours worked by employee) I want to know only the total hours for the last 30 calendar days. I still need to see previous values, but I just want to total the last 30
View 9 Replies View RelatedAdding In Different Columns
Jul 14, 2009i have two columns
column1: status
column2: total time of status
infinite long
now what i need to do is count the total time a specific status has.
f.ex.
column1: status1, status2, , status1
column2: 0 days 4 hours, 1 day 0.5 hours, 5 days 3.5 hours
how can i make a formula that looks up
if (in column1= status 1)
time= column2
the result i need is:
status1 = 5 days 7.5 hours
status2= 1 day 0.5 hours
i thought about a countif over column1 but i dont know how to add the second column