Array In SUMPRODUCT = NOTBLANK
Nov 14, 2008
I need to finish a final bit of tweaking in the following formula..
=SUMPRODUCT(--('[MRP Data File.xls]ZMM_CHECK_MRP_AREA'!$A$1:$A$10000=A9),--('[MRP Data File.xls]ZMM_CHECK_MRP_AREA'!$D$1:$D$10000="15BG"),--('[MRP Data File.xls]ZMM_CHECK_MRP_AREA'!$I$1:$I$10000""),'[MRP Data File.xls]ZMM_CHECK_MRP_AREA'!$R$1:$R$10000)
What I'm trying to achieve is to return the value of the cell in column R if column A=A9, D="15BG", this part is fine so far but I only want to return the value if column I = NOTBLANK
At the moment the value is returning whether it is blank or not...
For info: column I will only contain "CLC", "CLR" or totally blank
View 9 Replies
ADVERTISEMENT
Sep 9, 2009
There is a date field and three "attempt" fields.
If The first attempt was a fail and the second a pass this must count as a pass and not a fail. If the first attempt was a fail and second was a fail then this must count as a fail, same again for third column.
On the totals tab there should be a total against each date for the fails. As you can see iv tried doing by sumproduct but its not working, i understand why its not working but i just can't see how I can get it right.
View 6 Replies
View Related
Apr 3, 2009
formula to take data from a column entry to a row style? I've attached a sample spreadsheet.
View 9 Replies
View Related
May 6, 2009
I have a function that has a formula sumproduct and here it is:
Set RSheet = Worksheets("Rawdata")
Set RSheet = Worksheets("Rawdata")
RSheet_lastRow = RSheet.Cells(Rows.Count, "A").End(xlUp).Row
RSheet.Range("AJ2:AJ" & RSheet_lastRow).Formulaarray = "=SUMPRODUCT
((V2>=ProjectedStarts!$K$1:$K$45)*(V2<=ProjectedStarts!$L$1:$L$45),ProjectedStarts!$M$1:$M$45)"
The problem is that when the formula is sent to each cell V2 (bolded) does not change to V3, V4, V5.
View 3 Replies
View Related
Dec 16, 2009
I have the the following formula =SUMPRODUCT(--(dealer1=$B36),--(make=$A36),--(company<>nominated))
The first two statements work alone, however I have an array which contains a list of customers that I wish to exclude from the total. I've put those in an array and called it nominated, However I just get #N/A.
View 4 Replies
View Related
May 27, 2009
Using Excel 2003, I'm summarizing info in one sheet (Review) with data in another worksheet (Work Orders). The following SUMPRODUCT calc worked fine...
View 2 Replies
View Related
Nov 1, 2013
I need to sum several non-contiguous columns if certain other columns meet a certain criterion.
Details:
Need to sum columns Q,R,S,T,U,V,W,X,Y,Z,AC,AD,AI,AJ,AK,AL,AM,AN,AP,AQ,AR,AS,AT,AU,AV,AX,AY,AZ,BA,BC,BD,BE,BF,BH,BI,BK,BL,BM,BN,BQ,BR
in sheet "(1) 65539004 SAP"
IF
column D in sheet "(1) 65539004 SAP" = A2 in sheet "(4) Brand Breakout" AND column L in "(1) 65539004 SAP" = $B$1 in "(4) Brand Breakout"
The formula will be placed in C2 in "(4) Brand Breakout" and copied to other cells just FYI,
View 9 Replies
View Related
Sep 9, 2008
I think I need an array formula or possible a sumproduct formula, to make this work
=SUMIF($BU$36:$BU$66,"X",T$36:T$66)
Column BU is a column that gets an X auto added to it each day, the date field runs down my spreadsheet from row 36 to 66. I use the X as month to date signifier so each day before todays date has an X in column BU. The formula above will then take whatever is in column T and adds up only the figures enter against the date before todays date.
This method works for most of my fields but column T is an average so I can't just add up the averages.
Column T is Average Handle Time, to work out the AHT for the month I presume I need some sort of array formula that also looks at the number of multiples the AHT by calls handled each day then divide the total minutes month to date by the total calls handled. How do I fit in an array formula that only works for the days when column BU has an X in it.
The calls handled field is column P
I've tried this but it doesn't work as a formula (the sumproduct part works outside of the sum if part).
=SUMIF($BU$36:$BU$66,"X",SUMPRODUCT($P$36:$P$42,$T$36:$T$42))
View 9 Replies
View Related
Jul 29, 2009
I've created a spreadsheet with SUMPRODUCT formulae, which is working fine for now.
However, these formulae include arrays with ranges of, for example, $G$2:$G$600. What we need to do is, instead, reference the while column as far down as it goes, forever as the range of the array. This applies to multiple occurrences.
Every formula I have found for this may work on of itself, but does not work with the SUMPRODUCT formulae I have used.
For reference, an example:
=SUMPRODUCT(--('BG NEW DB'!$D$2:$D$600=$B$2),--('BG NEW DB'!$G$2:$G$600=C$2),--('BG NEW DB'!$H$2:$H$600=$A$2),--('BG NEW DB'!$AD$2:$AD$600="Y"))
View 10 Replies
View Related
Jul 16, 2007
I want to use Sumproduct function to sum up the values that belong only to Product "PXT" and "PCT". I enter it as array but my formulae doesnt work. can someone give me a hand. Here is my formulae: =SUMPRODUCT((C2:C10="PXT")*(C2:C10="PCT"))*(A2:A10)
ABCD
1ValueQtyProduct
2299.944PXT
3186.53PXT
4711.071PCA
5561.862PCT
6608.961PXT
7520.026PCT
8427.682PCA
9397.341PCA
10387.664PCT
View 2 Replies
View Related
Jun 16, 2009
To calculate the result for a month is easy, but I can't figure how to get a single cell formula to calculate for the year. The sample attached explains it better.
View 4 Replies
View Related
Jul 2, 2009
My problem is :
1.In G Column I put logic for Fail and Obtained Marks.
G2=IF(COUNTIF(B2:F2,">=60")=5,SUM(B2:F2),"Fail")
2. Now in H column I want use this formula which I obtained from this forum
H2=SUMPRODUCT((G$2:G$7>G2)/COUNTIF(G$2:G$7,G$2:G$7&""))+1
To get the position of Students.
But the text value "fail" in the G2:G7 getting Position No. 1 and i've noticed the reason by using evaluate formula as well.
3. I got solution by changing "Fail" with 0 by creating column I and then column H put this formula ........
View 14 Replies
View Related
Aug 25, 2008
I'm using a formula (with the SUMPRODUCT function) within which I need to match the month & year from an array with 3 "true" possibilities...
Meaning that if data (month & year) from the array matches any of the 3 months & year of a specific quarter (for example July 08, August 08, September 08), the result of that section should be "True".
The data to be matched (any of the 3 months of each quarter) is drawn from a table header (showing every month of the year) by using this "monthly" formula:
TEXT(H7;"mm.yyyy") where H7 holds "01.07.2008" (but displays "Jul. 08") and returns "07.2008".
I'm trying to extend it to something like:
TEXT({H$7;I$7;J$7};"mm.yyyy") to match either July 2008 (H7), August 2008 (I7) or September 2008 (J7) for the 3rd quarter of 2008 but when I hit Enter, I get an error and H$7 is highlighted ("ctrl + shift + enter" doesn't help).
Here's an excerpt of the formula that works well for other queries on my worksheet:
=SUMPRODUCT(--(TEXT('Current update analysis'!$O$2:OFFSET('Current update analysis'!$O$2;(COUNTA('Current update analysis'!$B:$B)+20);"mm.yyyy")=TEXT({H$7;I$7;J$7};"mm.yyyy")); --('Current update analysis'!$k$2:OFFSET('Current update analysis'!$k$2;(COUNTA('Current update analysis'!$B:$B)+20)="ok"))
how I could/should structure the formula for it to work?
View 10 Replies
View Related
Jul 6, 2009
I want to get students positions in a class like 1st, 2nd, 3rd, etc. There can be two 1st position and 2 2nd positions at a time .
1.In G Column I put logic for Fail and Obtained Marks.
G2=IF(COUNTIF(B2:F2,">=60")=5,SUM(B2:F2),"Fail")
2. Then i made array formula in column H to get the position
={SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G2))/COUNTIF(G$2:G$7,G$2:G$7&""))+1}
Some improvement to write fail & position
={IF(COUNTIF(B3:F3,">=60")5,"Fail",SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G3))/COUNTIF(G$2:G$7,G$2:G$7&""))+1)}
And more work to get total marks & position and Fail at the same time......
={IF(COUNTIF(B2:F2,">=60")5,"Fail",SUM(B2:F2)&"-"&SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G2))/COUNTIF(G$2:G$7,G$2:G$7&""))+1)}
Now I wounder that is there a way to do all calculations in column H without using column G
By replacing (if there is any method) G2, G3, G4 etc. with Sum(B2:F2); Sum(B3:F3);Sum(B4:F4) etc. in below formula
={SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G2))/COUNTIF(G$2:G$7,G$2:G$7&""))+1}.....................
View 9 Replies
View Related
Dec 27, 2013
I only want to include the Month of January in a sumproduct function on another page using a name manager array.
I was thinking of using
=SUMPRODUCT(INDEX(DATA,0,17),--((MONTH(INDEX(DATA,0,5)=1)*INDEX(DATA,0,17))
Where the dates are in the 6th column and include blank cells at the bottom and in the first row it says Date.
View 14 Replies
View Related
Jan 24, 2010
I need to check each of 13,000 job titles to see if they include the string "VP".
For the time being, I want to find the most efficient way to check an individual title, before building an array or SUMPRODUCT function that will check all the titles in swoop.
So... I have tried:
=ISNUMBER(SEARCH(A1,B1))
..but it returns TRUE if A1 and B1 are both blank -- which they can be in my spreadsheet.
And I have tried:
=SIGN(SEARCH(A1,B1))
but it returns #N/A if A1 cannot be found within B1.
If I can, I want to avoid introducing an IF statement because, looking ahead, I am already concerned that this analysis will be complicated enough without multiple paths.
So.. what's the most efficient way to return a TRUE/FALSE, or 1/0, result depending on whether A1 is in B1?
EXTRA-CREDIT!
An extension of the above problem... arrays and SUMPRODUCTs welcome:
What's the most efficient way to return a TRUE/FALSE, or 1/0, result depending on whether (A1 or A2 or A3... or A99) is in B1?
View 13 Replies
View Related
Dec 19, 2007
could provide me a loop function in VBA for these calcultions.
Cell A1*E1 + B1*F1 + C1*G1
Cell A2*E1 + B2*F1 + C2*G1
......till
CellA100*E1 + B100*F1 + C100 * G1
These are the calculations for E1-G1.
The process must be repeated till E50-G50
So the second step is:
Cell A1*E2 + B1*F2 + C1*G2
Cell A2*E2 + B2*F2 + C2*G2
......till
CellA100*E2 + B100*F2 + C100 * G2
View 12 Replies
View Related
Oct 3, 2013
I'm trying to pull thesum of huge number of columns in this case the range of pulling the data is B2:E7 based on two criteria (B8 and B9) The result is on B11
Sheet1
*
A
B
C
[Code].....
View 5 Replies
View Related
Dec 13, 2006
All I am doing is counting text values in a table.
The table has 3 main columns(which are relevant to this thread anyway).
Shift - Area - Status
The example I have attached shows examples of DCOUNTA, SUMPRODUCT and a Pivot Table.
I have read many threads stating that the best one to use is Pivot Table followed by DCOUNTA followed by SUMPRODUCT.
The most effective for me seems to be SUMPRODUCT (although this does slow excel down dramatically when you use a lot of these formulas). As do Array Formulas
The Pivot Table does not update on its own, therefore constantly needs to be refreshed. (I could use code to do this)
The DCOUNTA seems to be the least effective at doing what I want (unless I am doing something wrong)
In the attached example can the DCOUNTA be used more efficiently as I don't like the fact that I am duplicating rows to apply the criteria for a different shift. e.g
Area 1 - Late Shift - Banned
Area 1 - Early Shift - Banned
I want my table to be as follows (as the SUMPRODUCT shows)
AREA - Early Shift - Late Shift - Night Shift - Area Total
Area 1
Area 2
Area 3
Area 4
Area 5
Shift Total
View 4 Replies
View Related
Oct 23, 2009
I am trying to sum up the total number of hours consumed on a particular activity within a specified period.
=SUMPRODUCT(($C38:$C176>=$B7)*($C38:$C176<=$C7)*($B38:$B176=$D5))
Unfortunately, the formula above gives me the total number of activity and NOT the total number of hours within a specified period. I attached the file I'm working on as reference.
View 2 Replies
View Related
Jul 16, 2009
I have a spreadsheet representing a month where I am trying to figure out different scenarios for employees. One scenario is that an employee could have to move to a temporary position. In that case, I need to calculate the salary payments to temporary employees in a particular work unit. I've tried several different approaches to this problem, but am still getting the error.
One method has been using this sumproduct formula:
View 2 Replies
View Related
Jul 30, 2012
in C a string is nothing more than an Array of characters ending with a null character.
in VBA this does not seem to be the case.I am trying to use the BlowFish code from David Midkiff for some encryption, however the code sometimes fails:
When encrypting a string a string of a specific length should be returned. however sometimes one of the characters of the encrypted string is a null character, and the returned encrypted string (with a embedded null character) is causing me problems. I want to check for the null character and if present redo the encryption. But how do I check for the presence of this null character in a unicode (double-byte) string?
Checking with Len(encrypted) gives the correct length (!) but trying to move each (unicode)character into an array fails when using the Mid() function past the null character in the string.
Now I can use
byteArray() = StrConv(unicodetext,vbFromUnicode)
to get the lower byte of each character into an array easily, but how do I do this for both bytes of the unicode characters?
Using an integer array does not work other than through
intArray(j) = CInt(AscW(Mid(Outp, j, 1)))
which fails on the nullstring in my encrypted text.
I have tried with variants but so far no luck. I thought if the string was entered into a variant then I could also address the variant as an array of bytes, but that does not seem to be accepted by VBA.
View 1 Replies
View Related
Sep 9, 2012
I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Code:
Sub populate()
Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer
Dim r, c, num As Integer
[Code]....
The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.
View 6 Replies
View Related
Dec 20, 2013
I need to export this to Xcelsius which doesn't support any macros/vba. Btw I can;'t use Row() in xcelsius too.
[Code].....
View 4 Replies
View Related
Oct 2, 2008
I have a class module with several private variables, including one that is an array of a user-defined type. I am trying to set the values of a single element of this array with "Property Let ..." from a string array:
View 4 Replies
View Related
Apr 7, 2009
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
View 6 Replies
View Related
May 2, 2013
I'm only starting to get to grips with arrays. I have what I consider to be a lot of data that I need to 'cut' into separate workbooks. I have written some code that does this by simply looping through each line, 250k+, checking against a variable and copying the row into a separate sheet. This took longer than it would have doing it manually. It was suggested to me that I use arrays to speed up the process. I have managed to store the test data into an array but am struggling to find a way to loop through and pull out an entire 'row' from the array based on a variable. I have looked for 2 days in various places to find some way to loop through the data held in the array, but to no avail.
That code will appear here from about 8am GMT tomorrow. I know that once I've cracked this I'm on the road to some very significant time saving and comprehensive report writing.
View 9 Replies
View Related
Aug 5, 2014
I want to pass an array to Offset in the "Height" parameter, without having to type the array.
{=MAX(SUBTOTAL(9,(OFFSET(A1,ROW(1:5),,{1,2,3,4,5}))))}
I can't seem to figure out how to build the {1,2,3,4,5}. I've tried another ROW(1:5) and have tried nesting that like N(ROW(1:5)) but nothing works.
How I can get the {1,2,3,4,5} without having to type it out (so that I can expand this to a larger list)??
View 8 Replies
View Related
Aug 26, 2009
I am trying to filter an array (the longer one) using the shorter array as the criteria. I am currently doing this using the following method
IF(LOOKUP(lookup cell, array)=lookupcell, lookupcell, "FALSE")
I then copy and paste 'values' and filter out the 'false' to get my final result.
This has worked in the past, but for some reason that I simply can't figure out, the formula isnt working! I've attached the example, and I've highlighted a number in blue (cell E522 and C103), (that should be being found in the 'LOOKUP' function) but is returning a "FALSE". I have looked over the code and simply can't figure out why Excel isn't returning the right value.
This is obviously happening for a quite a few of my numbers, as my filter result is returning an array that is about 1500 shorter than it should be. I have highlighted E522 as the 'example cell' to look at.
View 6 Replies
View Related
Jun 21, 2014
wondering is there a VBA equivalent of --() in excel that turns trues and falses to 1's and 0's?
View 14 Replies
View Related
