I have the the following formula =SUMPRODUCT(--(dealer1=$B36),--(make=$A36),--(company<>nominated))
The first two statements work alone, however I have an array which contains a list of customers that I wish to exclude from the total. I've put those in an array and called it nominated, However I just get #N/A.
I'm working on a spreadsheet to rank stores based on how they perform in certain metrics. These metrics are weighted, and occasionally a metric for a store will get waived. I'm having trouble figuring out how to handle this without making a custom formula for each occurrence.
View 7 Replies View RelatedThere is a date field and three "attempt" fields.
If The first attempt was a fail and the second a pass this must count as a pass and not a fail. If the first attempt was a fail and second was a fail then this must count as a fail, same again for third column.
On the totals tab there should be a total against each date for the fails. As you can see iv tried doing by sumproduct but its not working, i understand why its not working but i just can't see how I can get it right.
formula to take data from a column entry to a row style? I've attached a sample spreadsheet.
View 9 Replies View RelatedI have a function that has a formula sumproduct and here it is:
Set RSheet = Worksheets("Rawdata")
Set RSheet = Worksheets("Rawdata")
RSheet_lastRow = RSheet.Cells(Rows.Count, "A").End(xlUp).Row
RSheet.Range("AJ2:AJ" & RSheet_lastRow).Formulaarray = "=SUMPRODUCT
((V2>=ProjectedStarts!$K$1:$K$45)*(V2<=ProjectedStarts!$L$1:$L$45),ProjectedStarts!$M$1:$M$45)"
The problem is that when the formula is sent to each cell V2 (bolded) does not change to V3, V4, V5.
I need to finish a final bit of tweaking in the following formula..
=SUMPRODUCT(--('[MRP Data File.xls]ZMM_CHECK_MRP_AREA'!$A$1:$A$10000=A9),--('[MRP Data File.xls]ZMM_CHECK_MRP_AREA'!$D$1:$D$10000="15BG"),--('[MRP Data File.xls]ZMM_CHECK_MRP_AREA'!$I$1:$I$10000""),'[MRP Data File.xls]ZMM_CHECK_MRP_AREA'!$R$1:$R$10000)
What I'm trying to achieve is to return the value of the cell in column R if column A=A9, D="15BG", this part is fine so far but I only want to return the value if column I = NOTBLANK
At the moment the value is returning whether it is blank or not...
For info: column I will only contain "CLC", "CLR" or totally blank
Using Excel 2003, I'm summarizing info in one sheet (Review) with data in another worksheet (Work Orders). The following SUMPRODUCT calc worked fine...
View 2 Replies View RelatedI need to sum several non-contiguous columns if certain other columns meet a certain criterion.
Details:
Need to sum columns Q,R,S,T,U,V,W,X,Y,Z,AC,AD,AI,AJ,AK,AL,AM,AN,AP,AQ,AR,AS,AT,AU,AV,AX,AY,AZ,BA,BC,BD,BE,BF,BH,BI,BK,BL,BM,BN,BQ,BR
in sheet "(1) 65539004 SAP"
IF
column D in sheet "(1) 65539004 SAP" = A2 in sheet "(4) Brand Breakout" AND column L in "(1) 65539004 SAP" = $B$1 in "(4) Brand Breakout"
The formula will be placed in C2 in "(4) Brand Breakout" and copied to other cells just FYI,
I think I need an array formula or possible a sumproduct formula, to make this work
=SUMIF($BU$36:$BU$66,"X",T$36:T$66)
Column BU is a column that gets an X auto added to it each day, the date field runs down my spreadsheet from row 36 to 66. I use the X as month to date signifier so each day before todays date has an X in column BU. The formula above will then take whatever is in column T and adds up only the figures enter against the date before todays date.
This method works for most of my fields but column T is an average so I can't just add up the averages.
Column T is Average Handle Time, to work out the AHT for the month I presume I need some sort of array formula that also looks at the number of multiples the AHT by calls handled each day then divide the total minutes month to date by the total calls handled. How do I fit in an array formula that only works for the days when column BU has an X in it.
The calls handled field is column P
I've tried this but it doesn't work as a formula (the sumproduct part works outside of the sum if part).
=SUMIF($BU$36:$BU$66,"X",SUMPRODUCT($P$36:$P$42,$T$36:$T$42))
I've created a spreadsheet with SUMPRODUCT formulae, which is working fine for now.
However, these formulae include arrays with ranges of, for example, $G$2:$G$600. What we need to do is, instead, reference the while column as far down as it goes, forever as the range of the array. This applies to multiple occurrences.
Every formula I have found for this may work on of itself, but does not work with the SUMPRODUCT formulae I have used.
For reference, an example:
=SUMPRODUCT(--('BG NEW DB'!$D$2:$D$600=$B$2),--('BG NEW DB'!$G$2:$G$600=C$2),--('BG NEW DB'!$H$2:$H$600=$A$2),--('BG NEW DB'!$AD$2:$AD$600="Y"))
I want to use Sumproduct function to sum up the values that belong only to Product "PXT" and "PCT". I enter it as array but my formulae doesnt work. can someone give me a hand. Here is my formulae: =SUMPRODUCT((C2:C10="PXT")*(C2:C10="PCT"))*(A2:A10)
ABCD
1ValueQtyProduct
2299.944PXT
3186.53PXT
4711.071PCA
5561.862PCT
6608.961PXT
7520.026PCT
8427.682PCA
9397.341PCA
10387.664PCT
To calculate the result for a month is easy, but I can't figure how to get a single cell formula to calculate for the year. The sample attached explains it better.
View 4 Replies View RelatedMy problem is :
1.In G Column I put logic for Fail and Obtained Marks.
G2=IF(COUNTIF(B2:F2,">=60")=5,SUM(B2:F2),"Fail")
2. Now in H column I want use this formula which I obtained from this forum
H2=SUMPRODUCT((G$2:G$7>G2)/COUNTIF(G$2:G$7,G$2:G$7&""))+1
To get the position of Students.
But the text value "fail" in the G2:G7 getting Position No. 1 and i've noticed the reason by using evaluate formula as well.
3. I got solution by changing "Fail" with 0 by creating column I and then column H put this formula ........
I'm using a formula (with the SUMPRODUCT function) within which I need to match the month & year from an array with 3 "true" possibilities...
Meaning that if data (month & year) from the array matches any of the 3 months & year of a specific quarter (for example July 08, August 08, September 08), the result of that section should be "True".
The data to be matched (any of the 3 months of each quarter) is drawn from a table header (showing every month of the year) by using this "monthly" formula:
TEXT(H7;"mm.yyyy") where H7 holds "01.07.2008" (but displays "Jul. 08") and returns "07.2008".
I'm trying to extend it to something like:
TEXT({H$7;I$7;J$7};"mm.yyyy") to match either July 2008 (H7), August 2008 (I7) or September 2008 (J7) for the 3rd quarter of 2008 but when I hit Enter, I get an error and H$7 is highlighted ("ctrl + shift + enter" doesn't help).
Here's an excerpt of the formula that works well for other queries on my worksheet:
=SUMPRODUCT(--(TEXT('Current update analysis'!$O$2:OFFSET('Current update analysis'!$O$2;(COUNTA('Current update analysis'!$B:$B)+20);"mm.yyyy")=TEXT({H$7;I$7;J$7};"mm.yyyy")); --('Current update analysis'!$k$2:OFFSET('Current update analysis'!$k$2;(COUNTA('Current update analysis'!$B:$B)+20)="ok"))
how I could/should structure the formula for it to work?
I want to get students positions in a class like 1st, 2nd, 3rd, etc. There can be two 1st position and 2 2nd positions at a time .
1.In G Column I put logic for Fail and Obtained Marks.
G2=IF(COUNTIF(B2:F2,">=60")=5,SUM(B2:F2),"Fail")
2. Then i made array formula in column H to get the position
={SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G2))/COUNTIF(G$2:G$7,G$2:G$7&""))+1}
Some improvement to write fail & position
={IF(COUNTIF(B3:F3,">=60")5,"Fail",SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G3))/COUNTIF(G$2:G$7,G$2:G$7&""))+1)}
And more work to get total marks & position and Fail at the same time......
={IF(COUNTIF(B2:F2,">=60")5,"Fail",SUM(B2:F2)&"-"&SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G2))/COUNTIF(G$2:G$7,G$2:G$7&""))+1)}
Now I wounder that is there a way to do all calculations in column H without using column G
By replacing (if there is any method) G2, G3, G4 etc. with Sum(B2:F2); Sum(B3:F3);Sum(B4:F4) etc. in below formula
={SUMPRODUCT((IF(ISNUMBER($G$2:$G$7),$G$2:$G$7,0)>N(G2))/COUNTIF(G$2:G$7,G$2:G$7&""))+1}.....................
I only want to include the Month of January in a sumproduct function on another page using a name manager array.
I was thinking of using
=SUMPRODUCT(INDEX(DATA,0,17),--((MONTH(INDEX(DATA,0,5)=1)*INDEX(DATA,0,17))
Where the dates are in the 6th column and include blank cells at the bottom and in the first row it says Date.
I need to check each of 13,000 job titles to see if they include the string "VP".
For the time being, I want to find the most efficient way to check an individual title, before building an array or SUMPRODUCT function that will check all the titles in swoop.
So... I have tried:
=ISNUMBER(SEARCH(A1,B1))
..but it returns TRUE if A1 and B1 are both blank -- which they can be in my spreadsheet.
And I have tried:
=SIGN(SEARCH(A1,B1))
but it returns #N/A if A1 cannot be found within B1.
If I can, I want to avoid introducing an IF statement because, looking ahead, I am already concerned that this analysis will be complicated enough without multiple paths.
So.. what's the most efficient way to return a TRUE/FALSE, or 1/0, result depending on whether A1 is in B1?
EXTRA-CREDIT!
An extension of the above problem... arrays and SUMPRODUCTs welcome:
What's the most efficient way to return a TRUE/FALSE, or 1/0, result depending on whether (A1 or A2 or A3... or A99) is in B1?
could provide me a loop function in VBA for these calcultions.
Cell A1*E1 + B1*F1 + C1*G1
Cell A2*E1 + B2*F1 + C2*G1
......till
CellA100*E1 + B100*F1 + C100 * G1
These are the calculations for E1-G1.
The process must be repeated till E50-G50
So the second step is:
Cell A1*E2 + B1*F2 + C1*G2
Cell A2*E2 + B2*F2 + C2*G2
......till
CellA100*E2 + B100*F2 + C100 * G2
I'm trying to pull thesum of huge number of columns in this case the range of pulling the data is B2:E7 based on two criteria (B8 and B9) The result is on B11
Sheet1
*
A
B
C
[Code].....
All I am doing is counting text values in a table.
The table has 3 main columns(which are relevant to this thread anyway).
Shift - Area - Status
The example I have attached shows examples of DCOUNTA, SUMPRODUCT and a Pivot Table.
I have read many threads stating that the best one to use is Pivot Table followed by DCOUNTA followed by SUMPRODUCT.
The most effective for me seems to be SUMPRODUCT (although this does slow excel down dramatically when you use a lot of these formulas). As do Array Formulas
The Pivot Table does not update on its own, therefore constantly needs to be refreshed. (I could use code to do this)
The DCOUNTA seems to be the least effective at doing what I want (unless I am doing something wrong)
In the attached example can the DCOUNTA be used more efficiently as I don't like the fact that I am duplicating rows to apply the criteria for a different shift. e.g
Area 1 - Late Shift - Banned
Area 1 - Early Shift - Banned
I want my table to be as follows (as the SUMPRODUCT shows)
AREA - Early Shift - Late Shift - Night Shift - Area Total
Area 1
Area 2
Area 3
Area 4
Area 5
Shift Total
I am trying to sum up the total number of hours consumed on a particular activity within a specified period.
=SUMPRODUCT(($C38:$C176>=$B7)*($C38:$C176<=$C7)*($B38:$B176=$D5))
Unfortunately, the formula above gives me the total number of activity and NOT the total number of hours within a specified period. I attached the file I'm working on as reference.
I have a spreadsheet representing a month where I am trying to figure out different scenarios for employees. One scenario is that an employee could have to move to a temporary position. In that case, I need to calculate the salary payments to temporary employees in a particular work unit. I've tried several different approaches to this problem, but am still getting the error.
One method has been using this sumproduct formula:
I have a COUNTA function that I'm using. However, I want to exclude "N/A" from my count, what is the function that I need to use to do that.
Currently I have =COUNTA($C$10:$C$122). How do I modify this formula so it doesn't include "N/A" in my count.
I have three columns that i've called 'active period' and 'Date/time' and 'value'
The the value of the cells in the 'active period' column depend on the value and time.
I want to create a cell that; when i can enter a date, this date will be excluded from the 'active period' column
I have pivot table that is pulling data from a page that is using the vlookup formula. I would like the table to only include fields that have data in the count. However, the pivot table is registering cells that have "0" (i.e., there's no actual data in the cell it is pull from) as having data. How can I get the pivot table count to ignore these cells?
View 1 Replies View RelatedOn the attached spreadh sheet I have production costs that I wish to calculate. There are certain courses that are a constant each month and they are input via a data validation list, however there will be courses that are run that are not on this list.
on the cell with 'Other' I want to total the costs for the courses that exclude the normal monthly courses.
Ive managed to use the formula below to exclude certain text but I cannot do it for multiple keywords, or maybe there is a simpler formula.
=SUMPRODUCT(--(G4:G31>0),L4:L31,--ISNUMBER(FIND("Suicide",G4:G31)))
I can find the min value excluding zero in a range of contiguous cells, but how can I do it if the cells are A1, A3, A25, A67, etc?
View 9 Replies View RelatedI am trying to automatically add up data, excluding that last two data points in a row. And every month add the next data point based on the date of the spreadsheet (top left). see trail below... This sting is going in circles.
View 14 Replies View RelatedI've been asked by one of our Managers to generate a report on stock that hasn't been sold for x amount of time. Unfortunately with our accounting package the report I run also includes stock that we may have purchased recently but have not sold.
So what I did was generate a report for stock that hasn't sold in the last two years(NOTSOLD), and then a report for stock that has been purchased within the last six months(PURCHASED). I've put both of these reports into two worksheets.
What I'd like to do now is match up stock codes across the two worksheets and exclude the PURCHASED stock from the NOTSOLD stock.
My Excel knowledge is limited but to put it in beginners terms I'm basically looking to do a reverse VLOOKUP.
I am trying to sum data in a column based on the absence of a character in a related column.
That is to say I need to be able to exclude rows that contain an "m" (there may be multiple characters in the criteria cell)