Array To Return Values In Each Cell Of First Row
Oct 17, 2011
I seem to be incapable of creating an array to return all of the values in each of the cells in the first row so that I can populate a combo box. I managed to do it without a problem for copying the sheet names within a workbook but not for this and I want to bang my head against the wall!
Basically, I have the first row of my spreadsheet for which I don't know how many columns contain data so my range is variable.
I then need to take the value of each cell and add it to my combo box (Later I would also like to use this routine to create and append sheets in other workbooks).
View 5 Replies
ADVERTISEMENT
May 5, 2014
I am trying to return an array of values into 1 cell.
Basically, I have a gigantic list of item names, item numbers, and reuse codes.
I want to populate all the reuse codes by item number in a second sheet:
something like this:
Source sheet
Item item num Reuse code
Widget1 w001 298767
Widget2 w002 4894957
widget3 w003 28276
Widget1 w001 12345
Widget1 w001 678910
What I want this code/formula to do is consolidate the reuse codes based on the item number.
Aggregate Sheet
Item item num Reuse code
Widget1 w001 298767;12345;678910
Widget2 w002 4894957
widget3 w003 28276
I have this formula but it only gets the 1st Reuse code, I want it to get ALL reuse codes for that item.
{=INDEX('Reuse list '!$P$2:$P$24489,SMALL(IF('Reuse list '!$E$2:$E$24489='Status Sheet'!A11,ROW('Reuse list '!$E$2:$E$24489)-ROW('Reuse list '!$E$2)+1),1))}
View 2 Replies
View Related
Jul 2, 2014
I am building a marketing dashboard that shows the effectiveness of two campaigns based on where the campaign has been deployed (website, email, facebook, twitter, google+ etc.). In each campaign I have a checklist (using developer ribbon) with these different dimensions.
I want a formula that checks the checklist, identifies all the boxes that are unticked and returns them in a single cell. The cell would read:
To increase traffic to the Shampoo campaign (Campaign A), expose it to Google+ and Facebook as these channels generated 578 and 2009 visitors respectively for the Makeup campaign (Campaign B).
I already have it working for returning a single value with the following formula but need it to return multiple values.
=IFERROR("To increase traffic to the "&B4&" campaign, expose it to "&INDEX(L4:L10,MATCH(K5,M4:M10,FALSE))&" "&"as"&" "&"this channel generated "&VLOOKUP(INDEX(L4:L10,MATCH(K5,M4:M10,FALSE)),L26:N31,2,FALSE)&" visitors for the "&D4&" campaign","")
View 1 Replies
View Related
Jul 2, 2014
I am building a marketing dashboard that shows the effectiveness of two campaigns based on where the campaign has been deployed (website, email, facebook, twitter, google+ etc.). In each campaign I have a checklist (using developer ribbon) with these different dimensions.
I want a formula that checks the checklist, identifies all the boxes that are unticked and returns them in a single cell. The cell would read:
To increase traffic to the Shampoo campaign (Campaign A), expose it to Google+ and Facebook as these channels generated 578 and 2009 visitors respectively for the Makeup campaign (Campaign B).
I already have it working for returning a single value with the following formula but need it to return multiple values.
=IFERROR("To increase traffic to the "&B4&" campaign, expose it to "&INDEX(L4:L10,
MATCH(K5,M4:M10,FALSE))&" "&"as"&" "&"this channel generated "&VLOOKUP
(INDEX(L4:L10,MATCH(K5,M4:M10,FALSE)),L26:N31,2,FALSE)&" visitors for the "&D4&" campaign","")
View 1 Replies
View Related
Aug 19, 2009
I have a spreadsheet of information (product codes and values) and want to use VBA to find the top ten list of products by value. The list of products is variable in length so I can pass the data to a two-dimensioned array.
How do I ask VBA to return the top ten products by value - there can be duplicate values so I just want ten (if there are 4 #9s, I just want two of them, any two)?
View 9 Replies
View Related
Dec 27, 2013
I am remodeling my home and have put together a budget template. I have uploaded the file to make things easy to understand. Basically I want to return the values from column F and G on sheet "ledger" to the corresponding account name to column H in sheet "budget". For example, rows 14, 21, and 22 in the "budget" sheet currently correspond to the "fuel" account. I would like those values in column G (or F) to be added and calculated in cell H58 in the "budget" sheet.
View 5 Replies
View Related
Jan 18, 2010
In the attached sheet, I want to look up values from table (A1:G5) and then for each occurrence of a particular number, return the value in the same row in column H, and sum when there are multiple values (see green shaded area for desired output. For example, the number 8 occurs in E3, E4, and G5. I want to return the sum of the corresponding values in column H (1,5, and 2). I've spent hours trying to work this one out, I'm sure this is probably an array formula, but I can't manage to make it work.
View 3 Replies
View Related
May 9, 2014
I'm having a difficult time returning COUNTIF values for a positive match between 2 columns THAT meet a certain condition. Basically I want to iterate through column A sheet 1 (ONLY for values where column B is paid) and return a count for every instance there is a match of value A sheet 1 in column A sheet 2. In other words, I'm looking to find the number of ids marked as paid from Column A sheet 1 that exist in Column A sheet 2. I don't wish to return the actual ids, just the total count.
I've tried the following but I know there's an error in iterating through Column A the way I have it:
=COUNTIFS(Sheet1!$ColA:$ColA,Sheet2!$ColA:$ColA,Sheet1!$ColB:$ColB,"paid")
Sheet1:
ColA
ColB
123
paid
[Code] .....
Sheet2:
ColA
ColB
23
NY
[Code] .....
View 7 Replies
View Related
May 30, 2006
I know something very similar was posted before, but unfortunately, it wasn't what I was looking for. I have a Worksheet tracking several associates and the department they have done work in. (Our associates are contractors for other departments). I need to have a final worksheet that allows me to pull up a name, and display every dept they worked with in the past week.
View 9 Replies
View Related
Dec 19, 2013
I can manage an array formula that returns a value based on a criteria. Simple. But I want to add in an additional couple of criteria. Now I'm stuck....
My sheet looks at a manually entered postcode, finds out what region this is in, and returns a list of postcode I have defined as being in that region. (So the postcode WF1 3JY would return a region of Yorkshire, and list postcodes of WF, BD, L, etc)
I also have a list of engineers, with a column for their home postcode.I want to be able to list all the engineers from my list whose home postcode matches any of the values on the already created list from the postcode and region entered. So far I have this, which finds me all the engineers for just one postcode area.
View 4 Replies
View Related
Feb 28, 2012
I have four named ranges (Segment, Keyword, Impressions and Dropdown) and I would like to create a formula-based ranking of keywords by impressions and clicks. Using the following array formula, I am able to return the correct values for impressions or clicks:
{=LARGE(IF(Segment=DropDown,Impressions),$H7)} where $H7 is the number ranking 1, 2, 3 etc.
My question is what array formula could be used to find which row in the array returned that number and then pulls the data from the same row in the other named ranges?
Essentially find row of {=LARGE(IF(Segment=DropDown,Impressions),$H7)} but return Keyword and Clicks on that row.
Other Notes: I cannot use pivot tables and some values might be the same which would make Vlookups not accurate for duplicate values.
Link to an example document to clarify this. [URL] .......
View 9 Replies
View Related
Jun 25, 2014
I have a formula which I took from another post to return a particular value in a specified cell as follows;
=INDEX(A1:E9,M3+MIN(IF(A1:E9=K3,ROW(A1:E9)-3)),N3+MIN(IF(A1:E9=K3,COLUMN(A1:E9)-1)))
However I don't understand what the -3 and -1 does and I believe it is these entries that are causing the error.
See attached file : TEST.xlsx
View 13 Replies
View Related
Mar 6, 2014
i wish to have a result of the below.
there are random dates in a column say D6:D17 in the format of (10/02/2014), there could only be one date in this column array or there could be several, like:
1/02/2014
12/04/2014
17/06/2014
5/12/2014
i also have an aray below this in cells D19:D30 With the "A" column showing the months Jan to Dec.
i wish to look the array of D6:D17 and populate the below cells corresponding with the months only, see example below. the reason for this is i wish to then turn the cell green with conditional formatting if there is a date in that month fro the original array.
Date10/02/2014
Date10/04/2014
Date10/06/2014
Date10/08/2014
Date10/12/2014
[Code]....
View 6 Replies
View Related
Jan 26, 2010
I need to figure out how to match three values on the "source info.xls" file attached to the "PFG FILE.xls" that is also attached. In column A in the "Source info.xls" file the formula will need to match the yellow column, then the green column, then the red column. keep in mind that the attached files are just a small subset of data. The "PFG File.XLS" is actually 150K rows long.
View 5 Replies
View Related
Oct 23, 2009
I have a table with multiple columns in which I want to find a value, then return the value that shows up to the right of it.
For instance:
I want to look for a unique value that exists in a cell somewhere in columns B-F, then I want to return the value of the cell in the next column.
So if I have value XYZ, and it's found in row 12 of Column B, I want to return the value in row 12 of column C.
Any way to do this with an index and match or some other formula?
View 9 Replies
View Related
Jan 10, 2014
Assume you have a rectangular range. Say A1:M18. There are values in some random cells (any number of cells) within the range. The rest of cells are blank. In cell M19 (ie cell below the bottom right corner of the range), I need a excel function that returns the nearest (ie physical location) non blank cell value. I have searched the internet for weeks. The closest formula is the following (see below) but it is flawed as it returns zero if there are values in rows below the row of the nearest cell with non blank...and also zero if there is value in a column greater than the column of the nearest cell with non blank.
Closest formula so far:
INDEX(A1:M18,LARGE(IF(ISBLANK(A1:M18),"",ROW(A1:M18)),1)-ROW(A1:M18)+1,LARGE(IF(ISBLANK(A1:M18),"",COLUMN(A1:M18)),1)-COLUMN(A1:M18)+1).
And the function should be relative not absolute as the range can be extended..but the location of the formula remain same relative to the array size. (ie. always at below the right bottom cell).
NOTE: Ignore the special case where two non blank cells are the nearest. That will not happen.
View 5 Replies
View Related
Mar 27, 2008
Is it possible to add cell values to an array i.e. Array(cells(1,1).value,Cells(2,1).value)
View 9 Replies
View Related
Sep 18, 2009
i'm trying to do my homework which requires me to pass values from an array in excel worksheet to VBA and print it in a msg box
i've tried
dim arr as variant
arr = range("A1:A6").value
msgbox arr
but it didn't work.
that's the first step of the homework the second is i have 2 list of array
year:1999 - 2002
profit:10,20,30,40
i have to find the max profit and get the year when it occurs
View 9 Replies
View Related
Aug 26, 2008
I need to convert a cell that has a list of values A1 = 1,2,3. To a range expression {1;2;3}. I want to do this with a formula and not VBA. Example: Cell D1 has the formula = SUMPRODUCT(COUNTIF(C30:C31,A30:A32),B30:B32). I want to put the list range from column C into one cell.
ABCD
110140
2203
3305
450
560
View 4 Replies
View Related
Aug 23, 2006
I want to get each distinct values from a range (say, c1:c20) and put them into an array for further processing.
View 3 Replies
View Related
Oct 17, 2007
I am trying to compare the values in an array with the values in a range of cells. It worked fine until I moved the code into a sub. The specific problem that I am having is that is pulling cell values from "shippablegoodspriorday" and it is supposed to be pulling the cell values from "shippablegoods".
module1
Call compareSheets(priorShippable, Sheets("notfound"), Sheets("variance"), Sheets("shippablegoods"), [A:A], 11)
module2
Sub compareSheets(goods() As Variant, WS As Worksheet, WS2 As Worksheet, WS3 As Worksheet, col As Range, offset As Integer)
With WS3.............
View 2 Replies
View Related
Feb 11, 2008
I'm trying to use an array to carry out string function on a range of excel cells.
Here is the code I am using
Dim arrXl As Variant
arrXl = ws.Range("F1:F" & ws.Range("D1").End(xlDown).Row)
For i = LBound(arrXl) To UBound(arrXl)
MsgBox (LBound(arrXl))
'If 1st char is different from 3rd char then remove all of string after 1st char
If Left(arrXl(i), 1) <> Mid(arrXl(i), 3, 1) Then
arrXl(i) = Left(arrXl(i), 1)
End If
'If 1st char is different from 7th char then delete string after 5th char
If Left(arrXl(i), 1) <> Mid(arrXl(i), 7, 1) Then
arrXl(i) = Left(arrXl(i), 5)
End If
The lbound function returns the value of 1 as the lower bound, I do not have "Option base 1" set so I was expecting the lbound value to be 0. The first 2 cells in the F column are blank so this may have something to do with it, I am unsure if cells in excel can be null if they can be null one cell may be null and the other may be a zero length string but I am unsure about this.
The ubound function returns a value of 487.
The code breaks when I try to access an element in the array so it breaks on the line:
If Left(arrXl(i), 1) <> Mid(arrXl(i), 3, 1) Then
and returns the "Subscript out of range" error message.
View 5 Replies
View Related
Oct 2, 2008
I have a class module with several private variables, including one that is an array of a user-defined type. I am trying to set the values of a single element of this array with "Property Let ..." from a string array:
View 4 Replies
View Related
Jan 7, 2009
If I have, in one cell (call it D1):
EH,DR,HU
and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E
I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...
eg...
F,G,H
View 9 Replies
View Related
Nov 19, 2013
At work I have a spread sheet that I used to track material shortages by part number. So in column A of the spread sheet there is a list of part numbers that have shortages, column E contains a list of all sales orders that are affected by the shortage separated by a comma. I am trying to setup a query sheet where I input a sales order and get back a list of parts that are short for that sales order(basically reversing the original list to be by sales order instead of part number). The number of values in column E varies, sometimes a cell will have 1 value, sometimes 20+ and anywhere in between.
Example Sheet:
A
B
C
D
E
123
012
234
789, 567
465
789
890
012
I'm already got a INDEX/MATCH that would show both shortages for sales order 012. But I can not figure out how to get the shortages for 789 or 567.
View 1 Replies
View Related
Apr 5, 2007
In cell A2 I want to enter a day of the week and have other cells use that as a reference to return data to its cell. E.,g
View 9 Replies
View Related
Jun 11, 2014
Let's say i got something like this
A B C D Result
200 250 Apple 600 Melon
251 450 Orange 225 Apple
451 700 Melon 325 Orange
751 900 Grape 457 Melon
So based on my example above, I have those data from column A to column D Now, how do I check if the value from column D belong to which category from column C based on the column A and B?
225 -> 200~250 -> Apple
325 -> 251~450 -> Orange
etc.
The result will appear on "Result" Column
View 4 Replies
View Related
Jan 30, 2008
I am attempting to have a user enter a First Name into the first Input Box and a Last Name into the second Input Box.
Within the code, I would like both answers to be returned to cell A1.
For example: A1 would read as Doe, James or James Doe (any variation is fine, as long as its one value in A1).
Sub Name()
y = InputBox("Enter First Name", "Information")
If y = "" Then
MsgBox "You must enter", 16, "Message"
Else
x = InputBox("Enter Last Name", "Information")
If x = "" Then
MsgBox "You must enter", 16, "Message"
Else
Range("A1") = y & & x
End If
End If
End Sub
View 9 Replies
View Related
Aug 4, 2008
I'm quite new in VBA and it can become a painful process to complete a working code. What I'm working on is a small process which looks up in individual cells within a range (ccy), for a particular value (EUR or USD) and if it finds that value, another cell in the same row with the value found is entered a certain text. What I wrote is:
Dim ccy As Range
Dim zone As Range
Dim i As Integer ...
View 7 Replies
View Related
Aug 6, 2009
I need to multiply an array of logical results ( returned as {1,0,0,0,1,0 et.}) with a text array (a reference column) and return the text in the reference column in case the value in the logical array is 1.
View 3 Replies
View Related
