i have three sheets in this workbook. i want to filter the the pupils with less than 20 marks in total at the end and copy it to the page named filter, from which i will go to the sheet1 which gives a remedial plan for ONLY those pupils who come in the filter page. this is all good but the problem is that when i update the Cont page, it wont update in the filter page.
View 6 Replies
How to solve table with filter which needs to be copy to other tab.
Example: One tab has table with filter. Issue is with another tab which needs to be copy but issue is that another tab will further investigate with additional columns. Can be solved this issue as first tab will filter and change all rows order and another tab should read content with added columns.
now i have filtered data in a table, i want to use the results by printing off a table showing just these and the appropriate rows from other tables on worksheets. these all have a specific ID which is how they are traceable to each other. like a related field in an access database. two tables/worksheets are like so:
table1:
Reg No | Rank | Name | Initials | Troop | etc
table 2:
Reg No | JCLM1 | JCLM2 | SCLM1 | SCLM2 | etc
If i were to filter the second table by JCLM1 = YES then i want to create a printable list of all those but also to include the related records from table 1. is this possible?
I have a pivot table that I need to copy only certain regions from the Report Filter on a frequent basis. For example, in the Report Filter, I have 18 total regions, but I only need to submit a pivot table for only 6 regions on a weekly basis. Currently, I'm filtering the 6 regions individually from the "data dump" and making 6 pivot tables as separate workbooks...and then emailing them out. I need to make the underlying detail available for each location that is getting their "report". I have the code for emailing a single worksheet from a workbook so, at least, I have that little tidbit taken care of.
View 2 Replies View RelatedI'm trying to find a way to return a value (score) based on the results in a table. I've been trying to use index and matches but am starting to think this will not be the answer for this one.
In the example attached, I have a section called report. For each project, there are criterias which need to be scored based on the values in the lookup table.
For example, project 1 has a result of 200 for criteria 1. On the lookup table 200 in criteria 1 would receive a score of 2. This result is then populated in column L as the score of this criteria.
So, I have a table of scores from players for a category I have. It looks like this:
Place-------------Name-------------Country-------------Score
1st---------------Jim----------------USA--------------------376
2nd--------------Michael-----------Germany-------------364
2nd--------------Tim---------------USA-----------------364
4th---------------John--------------Norway-------------355
if one of the guys, for example, John were to improve his score to a 369, I'd change the score in Excel, then use the sort feature to put him above Michael and Tim. Only problem is, it would say his place is still 4th place, and it doesn't change to 2nd place.
I want it so the "Place" column automatically changes to the correct rank based on the score the person has. So if I changed John's 355 score to 369 and hit sort by A-Z, Excel would automatically change the "Place" he's in appropriately so it would look like this:
Place-------------Name-------------Country-------------Score
1st---------------Jim----------------USA--------------------376
2nd--------------John--------------Norway--------------369
3rd---------------Michael-----------Germany-------------364
3rd--------------Tim----------------USA-----------------364
I have a list of S/N with Pass/Fail result next to it. A specific S/N can appear several times in the list:
SN...Result
-------------
111...FAIL
111...FAIL
111...FAIL
111...PASS
222...PASS
333...FAIL
333...FAIL
When creating a pivot table of SN vs. Result (count) I get:
****|FAIL...PASS
-------------------
111..|...3.....1
222..|..........1
333..|...2
I want to get the FAIL count of SN in which PASS > 0 (First two rows)
BUT I can not figure out how I can filter based on the values of the pivot table itself (rather than the values of the original list). When I try to use 'Result' field as report filter, I can not get it as a Column label (and vice-versa). In this case I get:
I get:
****|PASS
------------
111 | ...1
222 | ...1
Desired:
.......|..FAIL..PASS
-------------------
111 |...3...1
222 |........1
Desired (alternative):
......|..FAIL
-------------
111 |...3
222 |...0
I want to create a table that updates automatically with the name & highest score top.
I.E. currently I have :-
Dates starting in A4,
names B2 : K2,
scores B4 : K4,
Not too fussed about having the date in the results table but i'd like something like :-
Scott 4 points,
Geoff 7 points
Tony 2 points,
I would like a table to automatically sort a table (preferably on sheet 2) so it looks like :-
Geoff 7
Scott 4
Tony 2
Is this possible ?, I only have 6 rows of data so far so it can be re-arranged if needs be and data will be added each week.
I've written a Fantasy Football programme, which is 100% working, however I would like to have the highscoe table update automatically, rather than using the data/sort command. E-mail me and I'll sent it to you with what I'm trying to do.
View 2 Replies View RelatedI have two Tables, Table1 and Table2, in a single Excel spreadsheet. Table1 is our master log, and Table2 contains only Provider Names, Contact Names, Phone Numbers, and Email Addresses. I need to compare column K from Table1 with column AT from Table2. Whenever Excel finds a perfect match, I need Excel to copy AW:AY to AB:AD. For each value in column AT, there will be several identical matches in column K.
I have tried to implement vlookup() and index(match()), but cannot figure either one of them.
Table1 is almost 1500 rows long, while Table2 is not quite 80.
I want to see if i can make a formula that works out how a player got a score based on a scoring system. See the attached file for more details. I want this to show that the player scored or didn't score, played a full match or was a substitute, was booked or wasn't booked and was sent off or wasn't sent off.
View 5 Replies View RelatedOn a sheet called, "Details", I have a pivot table that has three fields in the column area, Calendar type, Description, and Dates. I want to filter the pivot table based on a label filter in the Dates column. The filter should be between two dates (in D4 and D5) that are entered on another sheet and passed to the Details sheet through formulas in cells D4 and D5.
I have attached the following code to a button on a different sheet.
The code successfully filters for the employee name (which is a report filter in the pivot table) which is in a named cell.
I am having trouble with passing the start and end dates to my pivot table filter. I do not get any errors, the filter is simply blank.
Private Sub CommandButton3_Click()
Sheets("Details").Select
Dim pt As PivotTable
Dim Employee As String
Dim SDate As String
Dim EDate As String
[Code]...
how can i make a worksheet/formula that automatically look for the equivalent score in a given transmutation table.
example: i have an exam of 10 items, what will be my formula to so that it will automatically look for the equivalent score under the transmutation table of 10 items
i have attached a book with a column of data in it.
This column can change from month to month, i.e. it can contain more or less data.
I need to filter the column "Prog Provider" for "SIN" and copy all of the data to a new sheet.
This is a tiny sample as this usually contains over 25000 lines and I need to grab everything in col G related to SIN.
I attempted to record a macro, but as different data was put in it missed parts out!
I've a table of historical members status list. with this table, I could track each member status history, since the beginning they become a member.
Here is the short of table
Name
Member Status
Date
Adel
New Member
1-Jan-14
[Code] ....
I expect to use Pivot table to show how many people which are still "New Member" and/or "Junior Member" up to now. From the table above, there should be: only one person who still as New Member. because it is only Smith, and only two people with Junior Member. they are Adel and Jhon.
I've search around and found the following useful link, viewing only the last date in a pivot table for each user
also A quick way to return the latest date in a subset in Excel
How to know the last status of each user (each member in my case).
I have columns on Sheet 1 with a filters and I want a way to make a list on Sheet 2 of each item (with out repeating) that is in the corresponding column on sheet 1.
This will be programmed in a userform to create the list when the form is loaded.
The end result being this: CopyFilterList.png
This is an example and there could be up to 50 or more options.
I tried to use an array to calculate the mean score for a column: if a cell has a value 'A', then it is assigned a value 1, if 'B', then 2, if 'C', then 3.
But this resulted an error.
File attached here. Example.xls
I am able to autofilter the table with a criteria on Column C, but I can't figure out how to mirror the visible cells on column C, on column B. Is that possible to do?
Example
Col A
Col B
Col C
SN0001
1/31/2013
1/15/2013
[Code]...
I want to filter column C to show only February and March dates, and overwrite the corresponding rows in Col B with the same dates in Col C.
This is a simplified version of what I am trying to do. In reality The column B information overwritten periodically, then further updated with information collected from several different sources.
I'm trying to find the last column of my table that will change from week to week and copy the contents of that cell and the one beneath it and paste them into the two cells to the right of them.
Here's what I've tried:
Sheets("LY - TY Chart - Tot. Sell $").Select
Dim lastTableColLY As Long
Dim lastTableColTY As Long
Dim nextTableColLY As Long
Dim nextTableColTY As Long
lastTableColLY = Cells(109, Columns.Count).End(xlToLeft).Column
lastTableColTY = Cells(110, Columns.Count).End(xlToLeft).Column
Range.Cells(lastTableColLY, lastTableColTY).Select.Copy
Range.Cells(nextTableColLY).Select.Paste
I'm getting the following error:
Compile error: Argument not optional at the
Range.Cells(lastTableColLY, lastTableColTY).Select.Copy
I have made a pivot table and I dlike to identify with a macro the documents with net value over 1000. Then extract these values next to the respective sales documents in an are near the pivot table somewhere. The fields are called Document and Sum of Net value. Of course the pivot is very variable one time it has 3000 records and another 5000.
View 9 Replies View RelatedI have a list of items that I am preparing to upload to an access database. The list is quite lengthy and has required a lot of manual corrections to get it prepared for upload. It also has several columns that are not needed in the access database, but that I used to make sure that all of my data was ready. What I'd like to do is create a new table that will have the same structure as the table in my access database and upload the portion of data that I have ready now so that I can do some further development using actual data. In order to do this I need to extract the ID Numbers (column B values) of the records that are marked "True" in the "Ready" column (column G Values) and deposit them in the new table. I only want to copy over the ID Numbers as the additional fields will be populated with match / index lookups from a third table that I have on another worksheet.
View 2 Replies View RelatedFunction in table.
I have a table:
A B C D
|Parent code|Child code|QTY|Unit|
|aaaaa | 1111| 1| PC|
| | 2222| 1| PC|
| | 3333| 1| PC|
| | 4444| 1| PC|
|bbbbb | 1111| 1| PC|
| | 2222| 1| PC|
| | 3333| 1| PC|
|ccccc | 1111| 1| PC|
| | 2222| 1| PC|
I need any function to "A" column to automatically fill in parent code to each child code (row) of the table.
I have a excel worksheet with the following columns: First name, Last Name, Email address, domain of email, product type, date registered. The list consists of about 50,000 entries. I want to sort the list by the domain of email(which I am able to do already) Once this is done, I want to find all instances of where a domain appears at least 10 times on the list(such as webmessenger.com appears 40 times, so I want to get that data).
For those instances where the domain appears at least 10 times, I want to pull those rows out of the intial list and put them in a new list(the new list will be sorted by domain and will only have people who have a domain which appears at least 10 times). To make this a bit more clear, The initial list I have is a list of people who registered to use the software my employer makes. We are trying to locate companies which may have many people using our consumer version of the software. When there is a large amount of people in the same organization using our software, it would benefit them to upgrade to the enterprise version due to enhanced managment features. By running this filter, I can see which companies have at least 10 users registered to use our software. Of course I will remove any Gmail/yahoo mail/msn/hotmail... pretty much any public email domains and just leave the ones that are obviously corporate emails.
So far, I think it probably has to be done with a pivot table... I was able to get a table that tells me how many instances occur from each domain, but I cannot get it to display the actual data(it just says IE. company.com 200, yahoo 120, etc... I need it to show me the 200 rows of company.com emails and extract them to a new sheet so that I can then follow up with company.com and see if they are interested in the corporate version.)
I need to copy all the work sheets into one single work sheet (mastersheet). The source work sheets are having same column structure. The condition which i need to take care of is that after column 3 if at all there is any data till column 10 then in the destination mastersheet these should be copied in different rows with first two columns repeated. I need to do this using VBA macro.
View 9 Replies View RelatedI am trying to filter onto Date field in my pivot table with a start date and an end date with VBA (please find code below).
However, my code single makes all pivot items invisible.
Bascially, in cell B1, I have my start date i.e. 05/04/2013 and end date in cell C1. I would like to filter out only items within these dates.
VB:
Sub PTFilterTest()
Dim ptPvt As PivotTable
Dim ptFld As PivotField
Dim i As Long
Dim dtBegin As Date
Dim dtEnd As Date
[Code] .....
I'm trying to have a command button clear all filters on a pivot table (PivotTable1) and apply a new filter equal to a cell value (C4). If the cell value can't be found I want the filter to equal "No Meeting". I'm trying to recycle the code from another workbook I built a long time ago, I just can't get it to convert to this application.
Code:
Dim County As IntegerDim pvtTable As PivotTable
Dim pvtField As PivotField
Dim pvtItem As PivotItem
[Code]....
I have a list of names and a count column, So it counts how many times the names have appeared from my raw data. Simple.
Using excel 2003 what i would like to do is filter the pivot table so it only shows people with a >1 count.
Now in excel 2007 this is really easy and i can just apply a >1 filter. I can't work out what to do in excel 2003.
I have a huge excel file. This file contains Projects, Project Manager, departments and sales for different quarters. Each department has sales and the quarter the sale was done. Now I want to create a pivot table where I can see the sales for each quarter for each project or each project manager. Attached file may elaborate the problem. ShaA1.xlsx
View 9 Replies View RelatedI am trying to filter a table of dynamic size. My table begins at P3 (first row of data, not column header) and ends somewhere at the bottom of Column AA. I am getting an error "AutoFilter Method of Range Class Failed." Why? How do I fix this?
Here is my code
VB:
If Target.Range.Address = "$B$4" Then
With Sheets("Days Past Due")
LastCell = .Cells(.Rows.Count, "AA").End(xlUp).Row
MsgBox LastCell
ActiveSheet.Range("P3:AA" & LastCell).AutoFilter Field:=17, Criteria1:="MABST"
End With
End If
I've created a PivotTable using VBA that contains hundreds of PivotItems, which would look bad when a PivotChart is made.
I'd like to set the PivotTable to make visible only the first X items (let's say 10). How would I do this in VBA?The macro recorder gives me the name of the PivotItem, but this varies so I'd like to use an index:
VB:
ActiveSheet.PivotTables("PivotTable4").PivotFields("UWI").PivotItems("Item1").Visible = False
ActiveSheet.PivotTables("PivotTable4").PivotFields("UWI").PivotItems("Item2").Visible = False
