Assigning/Retrieving Arrays Of Values To/from Listobjects
Jul 7, 2009How can I add an array of values to a listobject, preferably in one big chunk? How can I read a chunk of values from a listobject into an array?
For the latter, I've tried:
ADVERTISEMENT
Retrieving Values Based On Matching Values On Separate Worksheets
Feb 17, 2010Is it possible to have a formula where it will retrieve a specific value on one sheet based on matching values? Unfortunately, hlookup wont work as there are several values in the table where the 'lookup_value' is the same.
Example:
On sheet 1 (titled BSRC), I have a table which has a list of values in column 1. On column two I have the 'lookup value' which needs to be matched and all values underneath it to be retrieved from sheet 2 (titled CSRD). The 'lookup_value' range is on row 9 of sheet 2.
I have attached a sample spreadsheet for clarification.
Retrieving Values From Name Tag?
Apr 14, 2014I have created multiple nametags. I want to use a button which when pressed will run a loop to extract each individual element from the nametag and assigns a value to cell based on that. I have coded for the other functionality that happens when the cell value is changed but can't figure out a way to run the loop.
View 2 Replies View RelatedRetrieving Values From Last Row In Colums
Jan 20, 2009I'm using this code to input values into the next available row of columns of A and B.
Range("A65536").End(xlUp).Offset(1).Select
ActiveCell.FormulaR1C1 = Textbox1
Range("B65536").End(xlUp).Offset(1).Select
ActiveCell.FormulaR1C1 = Textbox2
I have this piece of code right under it:
Range("E65536").End(xlUp).Offset(1).Select
ActiveCell.FormulaR1C1 = Range("B65536").End(xlUp).Offset(1) - Range("A65536").End(xlUp).Offset(1)
The value being returned is 0.
What I want that last part to do is take the last row of column B and subtract the last row in column A.
Retrieving From A Database Using Listbox Values
Aug 9, 2007I have a two dimensional database from which I need to pull information based on multiple listbox values (these listboxes are located in a userform). The user selects one or more cars and then chooses from various parameters for that car. The output has to show the results - for example, if Jeep Cherokee and mpg are chosen, the output will be 23 mpg. I need to be able to do this for multiple cars and multiple parameters.
I need for the outputs to be located in a worksheet. I already have the code for setting up the list of cars and parameters selected (this gives me a row and column header), but now I need to be able to cross reference this information to pull the output from the master database. I was wondering if I can use a vlookup function to do this, but I've never used it with 2 dimensional data.
Lookup Retrieving Multiple Values
Jun 26, 2012I am trying to use a lookup to find the quantity of a certain fabric. However, more than one style uses the same type of fabric. Is there a way to do a lookup that retrieves multiple values?
View 1 Replies View RelatedRetrieving And Listing Values From Series Of Tabs
Jul 31, 2012I have a series of tabs in my sheet, the first one is called 'START', the last one 'END', and between them a series of other identical sheets ('Division 1', 'Division 2'... etc). In each of the 'Division' tabs, cell A1 (say) contains a string that I need to retrieve and order into a list on a summary sheet. The order doesn't really matter (i.e. it doesn't have to be alphabetical or anything), though it would be useful if there were no gaps in the list.
View 1 Replies View RelatedDynamic Worksheets And Retrieving Values For Non Blank Cells
Feb 4, 2010I am setting up a questionnaire which needs to be dynamic. The questions in the questionnaire are pulled from a 'baseline sheet' using check boxes and an if statement, i.e. each question in the baseline sheet has a tickbox next to it, and if it is checked then the question is populated into the questionnaire sheet.
Im wondering if there anyway for the worksheet to populate the input cell with the next cell value from the baseline sheet if the first is blank? So if a box is not ticked, it will intelligently seek out the next box that has been ticked and retrieve that value. Essentially, my goal is to not have any blank spaces in the questionnaire which is what is happening now.
Assigning Values To Value Ranges?
Jan 4, 2013Essentially, I'm arranging an excel spreadsheet to organise my ongoing sales and keep record. I would love to have a formula to calculate the appropriate comission for each sale.
The ranges are:
0-199 = 0 Comission
200-499 = 10 Comission
500-999 = 25 Comission
1000+ = 50 Comission
I managed to get the 0, 10 Comission to be processed correctly but sadly I've hit a brick wall as to how to include the 25, 50.
The formula I have so far is as follow: =IF(COUNT(D22),IF(D22
Assigning Values To Letters
Jan 24, 2014I have to assign 3 values to 3 letters, I have been using the LOOKUP function,
P=20, C=35, W=100
I have input the following:-
=LOOKUP(A1,{"P","C","W"},{20,35,100})
But for some reason it is inputting 35 for the value of P.
Assigning Values To An Array
Apr 30, 2007I am trying to assign a range of values with different types( date,time,integer) to an array. I am using the following command which works fine.
Dim vArr() As Variant
vArr=range("A1"). currentregion.value
However when I try to print the "time formatted" values in the second column of the range I can't. I can't use timevalue function as well cause it doesn't treat the values as string but integers. Why is this happening even when I declare the array as variant?
Assigning Values To Array
May 2, 2007I am trying to assign a range of values with different types( date, time,integer) to an array. I am using the following command which works fine.
Dim vArr() As Variant
vArr=range("A1"). currentregion.value
However when I try to print the "time formatted" values in the second column of the range I can't. I can't use timevalue function as well cause it doesn't treat the values as string but integers. Why is this happening even when I declare the array as variant?
Retrieving Cell Values Based On User Defined Number Range?
Mar 31, 2014So I have 2 sheets from a much larger worksheet where I wish for the first sheet to extract a row of values, one at a time from the second sheet using a range of numbers I enter as reference for where to look for the data. Sheet 1 can be thought of as a summary page and Sheet 2 is where data is stored.
I need to first check if any data under Sheet 2 column B fall within a specified range of numbers and if any of those numbers are found I want it to grab the largest and latest number from that range and pull all the data from certain columns in that same row and place it into Sheet 1, one column value at a time.
Sheet 1 A1 = A range of numbers as text. 10-15, 16-20 etc Only one range is entered. This also tells me what results I'm looking at.
Sheet 1 B4:B14 = Destination cells for the individual data I'm wanting to pull from Sheet 2 columns H:P. B4 wants H, B5 wants I, B6 wants J etc
Sheet 2 column A = A3:A102 are numbered 1:100.
Sheet 2 column B = A series of numbers anywhere from 10-70. Always in sequence and they can repeat. 10,10,11,12,13,14,15,15,15,16 etc. Ranges from B3:B102. Only one number per cell.
Sheet 2 columns H:P = Data in H3:P102 I want to extract to Sheet 1 B4:B14.
Now lets say I want a formula for Sheet 1 B4 which wants a value in Sheet 2 H. If Sheet 1 A1 = 10-15, I want to check whether Sheet 2 column B has any values equaling those and then tell me which row that last number appeared in.
Example: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5. (B6 is outside range and B4 isn't the last time the 14 appears.)
Then, knowing B5 is the value I want, find which row it is in (row 5 in this example) or use the number in A5 (3) and then find my way to column H (H5) where the value I want to pull is.
Example 2: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5.
Sheet 2 H4=10, Sheet 2 H5=32, Sheet 2 H6=42. Place "32" from H5 into Sheet 1 B4.
I'd like to also have some error control so I'm not trying to pull data from blank cells if it's relevant. Maybe check if Sheet 2 X3=0 and if it is, do nothing as no data appears if the cell is 0.
I have put a lot of time into trying to solve this myself but I feel way out of my depth. I've tried going step by step but I can't seem to figure out which functions are relevant and also things like how to return the range that the A1 values appear in or if using MAX, not having it return values outside of A1's range also.
Assigning Numerical Values To Words
Mar 9, 2013I'm making a spreadsheet for the homes I'm looking at purchasing and wanted a way to calculate automatically which one has the most things we're looking for.
So for example, if a home has a walk in closet, it would say "yes". If it doesn't it obviously would say "no".
Is there a way to assign a number value in a totals column where "yes"=1 and "no"=2?
Or a way to make colors equal a certain value?
Where I'd make all the "yes" items green and then a green cell = 1, a yellow cell = 2, and a red cell = 3.
Assigning Text Numerical Values
Jul 9, 2006Is it possible once you have assigned text a numerical value (example: Adam = 12) to add them together? (example: adam =12 and bob = 8, therefore adam + bob = 20)
Slicing And Dicing CSV Files - Involves Arrays And Jagged Arrays
May 8, 2013I am retrieving a CSV file from the net. In this file there are 'x' amount of row data and 7 columns. I only care about the values in the 7th column for each row. I also don't care about the entire first row. A graphical version would be represented something like this, with the values I want colored in orange:
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
.
. extending until the end of the data set
.
I've managed to dice this thing into a jagged array by first splitting it using vbLf as a delimiter, and therefore adding those to an array called Lines(). Then I split Lines() up using commas as the delimiter and threw those into a jagged array, let's call it Breadcrumbs()(). I want to throw all the values from Breadcrumbs(i)(6) into an array of its own. Here's my code so far:
Code:
Public Sub CSVparser(file As String)
Dim Lines As Variant
Dim j As Integer
Lines = Split(file, vbLf)
ReDim breadCrumbs(UBound(Lines)) As Variant
For i = 1 to UBound(Lines) - 1
breadCrumbs(i) = Split(Lines(i), ",")
Next i
End Sub
Make Values Add To A Certain Sum By Assigning A Digit Or Chipher To It
Apr 23, 2009I have a column of numerical values: fields a1 to a10. Then, I have four fields – c1 to c4 – in which I want sums of some chosen values from column a to be summed up. Eg., c1 is to be a2+a3+a9, c2 is to be a4, c3 is void, c4 is a1+a8. The other a fields are ignored, and no a field will be counted twice. Now, I want to put something –*a letter or a number or so –*into the fields b1 to b10, that makes the aforestanding value sum up to a certain field in column c. Like, I put a "1", or maybe an "a", into b2 and b3 and b9, and that makes a2, a3, and a9 sum up to c1. So I'd need something that says: if this cell is "1", add the value in the cell to your left to the sum that makes the value in c1. As you can tell by my writing, I'm no geek in these matters.
View 4 Replies View RelatedAssigning Variable Values To Letters In A Table
Jul 20, 2007I have a formula which assigns a points score to letters in a range and adds them up. In the example below F=0, P=6, M=12 & D=18. =IF( COUNTIF(AT5:BE5,"="""),"",SUM(COUNTIF(AT5:BE5,"=F")*0,COUNTIF(AT5:BE5,"=P")*6,COUNTIF(AT5:BE5,"=M")*12,COUNTIF(AT5:BE5,"=D")*18)). Thus if F, P, M & D were in cells A1:D1 the result would be 0+6+12+18=36.
My aim is to be able to customise the values of F, P, M & D, using a table and a cell value. See the table below, where the first number in each row represents a cell value which the user enters into BH1, the second, third, fourth and fifth numbers represents the values assigned to the letters F, P, M & D.
10 0 1 2 3
30 0 3 6 9
60 0 6 12 18
90 0 9 18 27
120 0 12 24 36
Some examples of expected output: user enters 10 into BH1 and then enters F, P, M & D in cells A1:D1 the result would be 0+1+2+3=6. user enters 90 into BH1 and then enters F, P, M & D in cells A1:D1 the result would be 0+9+18+27=54.
Count When Values Occur In Different Arrays
Feb 26, 2009My difficulty is this. I have 2 columns, A and B. A contains only 0's and 1's. B contains any number from 1 to 100. I want to count all the instances of any given number in Col B that are matched with a 1 in the corresponding cell in Col A.
View 6 Replies View RelatedAdd Values To 2 Arrays Depending On What Is In Worksheet Table
Jan 4, 2012I have some arrays to loop through some code which generates some graphs:
Code:
Sub demo()
Dim aServer
Dim aType
Dim i
aServer = Array("a", "b", "c")
aType = Array("1", "2", "3")
[code]....
I am now trying to populate the arrays dynamically and thought I could work that out myself, but this is my first ever time with VBA and it's not as easy as I thought (Or maybe I'm not as clever as I thought!)
I have a table in a worksheet with column headings and row headings which are the values to be added to the array.
Lets say I have the following:
Column headings = "x", "y", "z" (these are the potential aType values)
Row headings= "1", "2", "3" (these are the potential aServer values)
_,x, y, z
1
2
3
The values in the table are either TRUE or FALSE (Or blank which should be interpreted as FALSE). Where there is a TRUE the column heading should be added to the aServer array and the Row heading should be added to the aType array.
In this 9 cell example (Not counting the row and column headings), if the first 2 rows had all the values as TRUE (See example table below) it would therefore result in the following arrays:
_,x, y, z
1,TRUE,TRUE,TRUE
2,TRUE,TRUE,TRUE
3,FALSE,FALSE,FALSE
Code:
aServer = Array("1", "1", "1", "2", "2", "2")
aType = Array("x", "y", "z", "x", "y", "z")
If the table was as follows:
_,x, y, z
1,TRUE,FALSE,FALSE
2,FALSE,FALSE,FALSE
3,FALSE,TRUE,TRUE
It should result in the following arrays:
Code:
aServer = Array("1", "3", "3")
aType = Array("x", "y", "z")
this would work out how many rows and columns there were based on how many column headings and row headings there were (So I wouldn't have to change the hardcoded VBA when the table grows, therefore making it easier to share the spreadsheet with others)
Search Arrays For Specific Values And Copy "associated" Values To A New Location
May 26, 2006Given the following data located in Sheet1 of a Workbook -
•I have seven columns (assume header row names are “A, B, C, D, E, F, G”) each containing numeric data in random order.
•All columns are of the same length (equal number of rows), followed by a blank cell, but the number of rows is unknown.
•Columns with header row names A-E will only contain numbers from 0 to 100, while F and G may contain numbers from -127 to +128.
Here is what I would like to do –
I would like to be able to analyze the data in columns A-D to locate rows that contain specific combinations of values (ex. row 41 contains the values 50, 0, 0, 0 and row 239 contains values 100, 0, 0, 0 in columns A – D, respectively, etc.).
For each row that is found to contain one of these combinations (there are many different combinations required), I would like to copy the associated values from columns E, F, & G for that row, and paste them into their respective (E, F, & G) columns located on Sheet2 of the same workbook. However, I would like to paste the E, F, & G values into a specific row order on Sheet2, DETERMINED by the value of the A – D combination identified on Sheet1.
Continuing with the ex. above, let’s say I would like to have the EFG values from row 239 in Sheet1 copied to row 10 in Sheet2, while the EFG values from row 41, Sheet1, are to be copied to row 11 in Sheet2.
In effect, I would like to create a table of this subset of data, in a specific order, from which I could work later.
I can do this manually using “ AutoFilter” to locate the data I need and then write formulas to copy the data from Sheet1 to Sheet2 in the order that I need, but every time the order of the original data on Sheet1 changes I have to start all over.
Assigning Label Names Based On A Range Of Cell Values
Feb 20, 2007I searched and found that to assign a name to a label based on a cell value requires the following
Label1.Caption = Worksheets("Sheet1").Range("A1").Value
which would assign the value in cell A1 as the caption for Label1. I've got a range of values in cells:
C4:N4
and I'd like to assign them as names to labels 1 through 12. How would I do that using VBA?
Complex Printing Of Values Of Unique Strings Between 2 Arrays?
Jul 11, 2014I have the following arrays.
A1=Array("A","D","F")
A2 = Array(Array(0, 1, 4, 5), Array(2, 0, 1, 1), Array(2, 3, 11, 3))
B1=Array("D","X","F","J")
B2 = Array(Array(6, 0, 2, 1), Array(1, 1, 6, 1), Array(7, 9, 1, 0),Array(0, 3, 2, 2))
I would like to print in column A all the unique/common values between Array A1 and Array B1. The common values are A,D,F,X,J. And I'd like to print in Columns D:G the A2(i) values and print in columns I:L the values B2(i) in the corresponding row of values of arrays A1 and B1. If some string only appears in array A1 (i.e. "A"), this means that string "A" have values associated in array A2, but not in B2, then print zeros from I:L and if the string only appears in array B1 (i.e. "X" and "J"), this means that strings "X" and "J" have values associated in array B2, but don't have valus in A2, then print zeros from D:G for the same row of X and J.
Excel VBA Plotting Of Bar And Line Graphs Given Arrays Of X And Y Values
Jul 14, 2014Plotting of bar and line graphs given an arrays of x and y values in VBA? I want to plot the rDateRange and rOEERange.
Code:
Dim rInitialDate As Range, rFinalDate As Range, rDateRange As Range, Calculation As Worksheet
With Worksheets("Calculation")
Set rInitialDate = .UsedRange.Find(What:=DateValue(InitialDate), After:=.Cells(1, 4), LookIn:=xlFormulas, LookAt:=xlWhole, SearchDirection:=xlNext, SearchFormat:=False)
[Code] .........
Retrieving Data
Dec 31, 2008I have a spreadsheet with several tabs. I am wanting to lookup data in tab "A" based on data in a list. For example:
I may have:
Tab A
Tab B
Tab C
Tab D
Tab E
I have created a validation list containing A, B C, D, E I would like to use Hlookup to look up data imported into the table in Date order.
Retrieving The Information
Dec 1, 2009i have workbook in which I have two sheets, one of them cotains colums with information and in the other sheet I have to create a Search box to retrieve all from any Contact number, of course it has to be based on contact numbers culumn.
example:
CONTACT_NUMBEROPPORTUNITY_TYPEQUARTERCON_TYPECONTRACT_TYPE_DESCRIPTION_LINECURR_CODE
379159OUTSOURCE201002C4PSMARTnet Onsite Premium 2x7x4USD
389859OUTSOURCE201002SNTSMARTnet 85xNBDUSD
379159OUTSOURCE201002C4PSMARTnet Osite Premium 4x7x4USD
388859OUTSOURCE201002SNTSMARTnet 85xNBDUSD
388459OUTSOURCE201002SNTSMARTnet 85xNBDUSD
388459OUTSOURCE201002SNTSMARTnet 85xNBDUSD
and in the other sheet I have to create a search box template that based on the contact number it will retrieve all other information.
Retrieving User Name
Nov 14, 2008When I run it it returns in A1, Jeffrey.Brown2. I would like to turn this into Brown, Jeffrey but because another user may have a shorter or longer name the Left & Right function does not work for every scenario?
Sub who()
Range("A1").Value = Environ("username")
End Sub
Retrieving Data From A Website
Jul 31, 2013retrieving data from financial website databases like yahoofinance.com and bloomberg.com. I'm trying to make an automatic stock analysis model to read from the website database and retrieve the data into excel sheets. For example, when opening the excel model the user gets a popup to enter the stock ticker, the user enters the ticker and gets a set of data. Is this do-able in excel?
View 2 Replies View RelatedRetrieving Data From Text?
Sep 22, 2013i have a long list of what were once file names in excel that i need to retrieve data from. i have attached an example file with 2 file names which i recomend to view while reading this request.the file has 2 spreadsheets. the first one is just the file name in the format in which i recieve it. the second one is a table that i need to fill out from the data in those file names.
i have a problem with the following columns in spreadsheet 2:
1. column C: i have the command to copy the site name as it is to this column, but what i need is for the program to read if the site name is ZANUAH or ADORA and then write only Z or A. note that these two site names have a different number of charecters in them.
2. columnd D: similar problem. i need it to read the lab name and write AL if its MAGAMA, BA if its Ben-Ari and SH if its shafir. i have the command for excel to simply copy the word, but how do i make it write the letters that represent the lab name rather than the lab name itself?
3. column E: the report number is the 6 digit number in the file name. i have the command which retrieves it, but it has trouble when the length of the number changes. its important to note that sometimes the number might contain non-numerical characters like 219641-1.
4. column O:i have the command to get the data from the parentheses next to PSD in the file name into a box. what i need is to get it to copy just the letters C or NC from the file name into this column, without the number.
5. column P: same as column O, but here i need just the number, without the C or NC.
6. column T: all i need is for it to copy the last 2 letters from the file name, which i know how to do. the problem is that since the file names come with a .pdf at the end, all i get is df. so in fact i need it to copy th 6th and the 5th letters from the end of the file name, which is above my abilities.
Retrieving Data Of Certain Cell
Jan 28, 2009I am trying to get the data out of a cell and put it in a textbox in my userform.
What I have is a Worksheet that has autofilter on. After the user clicks certain objectbuttons, there is only one row, that has data in it, displayed. The cell I'm after will always be in column A and be the second visible row.