Dynamic Worksheets And Retrieving Values For Non Blank Cells
Feb 4, 2010
I am setting up a questionnaire which needs to be dynamic. The questions in the questionnaire are pulled from a 'baseline sheet' using check boxes and an if statement, i.e. each question in the baseline sheet has a tickbox next to it, and if it is checked then the question is populated into the questionnaire sheet.
Im wondering if there anyway for the worksheet to populate the input cell with the next cell value from the baseline sheet if the first is blank? So if a box is not ticked, it will intelligently seek out the next box that has been ticked and retrieve that value. Essentially, my goal is to not have any blank spaces in the questionnaire which is what is happening now.
View 4 Replies
ADVERTISEMENT
Feb 17, 2010
Is it possible to have a formula where it will retrieve a specific value on one sheet based on matching values? Unfortunately, hlookup wont work as there are several values in the table where the 'lookup_value' is the same.
Example:
On sheet 1 (titled BSRC), I have a table which has a list of values in column 1. On column two I have the 'lookup value' which needs to be matched and all values underneath it to be retrieved from sheet 2 (titled CSRD). The 'lookup_value' range is on row 9 of sheet 2.
I have attached a sample spreadsheet for clarification.
View 7 Replies
View Related
Sep 27, 2011
I have a query on retrieving the result from a set of range from other sheet.
Query: In the Sheet1 Column B has to take first two words from the
Column A & lookup the matching results from Sheet 2.
(The search range should be the first two words of each cell)
Result: The complete sentance in the Cells (First Two words) should get placed in the Sheet1 Column B
Example: The Expected result should be as mentioned below. (Blue in color should be the results)
Sheet1A BC1NameResults2abc def fkfeabc def words3ghi jkl kikgN/A4mno pqr stu lkasmno pqr must work5
Don't give my book don't give up6vwx yzyvwx yzy not7xwv uts rqpxwv uts yes8omn lkjN/A9ihg fed cbaN/A
Sheet2A BC1Lookup Data2abc def words3xxxghi jkl4yes you have to5don't give up6no you will not7mno pqr must work8vwx yzy not9Excel work10xwv uts yes11omn mre lkj12ihg not fed 13not work14
This is my query
View 7 Replies
View Related
Jun 19, 2014
I want to be able to choose a country from a drop-down list, and then have the spreadsheet retrieve/return values from that country, whose input data is located in a different worksheet. E.g. I want to be able to change the input according to what country I am looking at. I was able to do this with simple IF functions,but I'm realizing that this is not good enough. I want to eventually expand the number of countries that I want to return data from, and then the formula is not dynamic enough.
Example spreadsheet attached.
To make it simple: I want to be able to return the correct values for "page views" and "high" and "low" according to what country I choose from the drop-down menu in cell C3 on the "value calculator" sheet.
Also; in cell N15 and N16 I want the alternatives to be yes and no, and they cannot be yes at the same time. H
View 6 Replies
View Related
Aug 27, 2009
I have two lists. One is a database (Worksheet 2) with a lot of information, and another is the list (worksheet 1) I need to fill up the data for. What I want to do is to search for the names that are in worksheet 1 in worksheet 2, and if there is a match, retrieve the missing data in those rows, and paste it back into worksheet 1. For example:
Worksheet 1: Joe
Tim 23
Matt
Worksheet 2: Alex 45
Joe 23
Mark 47
Tim 44
Matt 24
I basically want it to be able to search for the corresponding name, and then pull the number associated with it.
View 2 Replies
View Related
Aug 11, 2008
I am having the same problem as this thread Dynamic Ranges with blank cells.
I've recently been pointed in the direction of dynamic ranges (named ranges that use OFFSET and COUNTA to expand to cover the whole of a list, even if the number of rows used is frequently changed).
They seem to have a big drawback, in that the range will not go to the bottom of the list if the list has blank cells in (because the COUNTA for the column of interest does not equal the number of rows in the list).
A typical named range might look like this:
=OFFSET(Sheet1!$A$2,0,0,COUNTA(Sheet1!$A$2:$A$25),1)
I tried to post in it but it's too old.
I have been to the link posted in that thread about advanced dynamic named ranges but inserting a row with numbers in it and then hiding it is not suitable for me as i deal with other peoples spreadsheets so need to always be working with the Active Sheet.
View 4 Replies
View Related
Sep 28, 2007
Retrieving the address of the last cell before the FIRST blank in a range.
OK, I have searched the web through six different search engines and explored too many dead end solutions to this problem that I am nearly ready to just scrap the whole sheet.
The problem is very simple.
I need to return the address of the last cell that contains data before the FIRST blank cell.
Heck, I don’t even need to have the address, I can just index the position.
Problem is this question has been posted on nearly every excel help forum from here to pokipsy.
Unfortunately EVERY solution I have seen fails the “FIRST blank” requirement.
I have a column of data that never has blanks until the end of the data. I need to know what that cell address is in order to identify a range.
This data has a table above it and below it so none of the “dynamic range” or “Dynamic range name” solutions will work.
How do you get that address without the function continuing to the last blank cell?
View 14 Replies
View Related
Jul 22, 2014
I've normally just dynamically selected a range using the xldown feature but because this row contains formula it goes always down to the bottom of the formula instead of the last cell which isn't blank.
How would i go about generating this dynamic range that stops at the first cell that contains no value (but has a formula)? Perhaps a do while loop which looped down until it hit the first blank and then assigned the cells it had looped through as the range?
View 3 Replies
View Related
Sep 20, 2013
I am trying to pull data from multiple textboxes on multiple worksheets and compile it into a list on a mastersheet. I have searched multiple forums and I have been unable to piece together anything. I have attached an example workbook of the data that I am trying to compile. I am trying to pull the data for the textbox next to NAME, SS#, and SCHED. I have tried recording a macro for 1 sheet and then modifying the macro to work for on all worksheets but failed miserably.
View 1 Replies
View Related
May 19, 2014
Attached is a spreadsheet I am working on that has a series of graphs with defined dynamic ranges. I am having 2 separate issues on 2 different tabs.
1) Ranges named AirRecBra4 (and Bra10); AirComBra4 (and Bra10); AirRemBra4 (and Bra10) are not pulling in data from the correct data points. Instead of using the last 26 data point, they are currently beginning at the top of the column (currently cells 11 to 36 is their respective columns). The formulas are copy and pasted from working offset ranges in the same tab but are reading differently.
2) On the last 6 tabs beginning with Stn Backlog, I want to have defined formulas beginning in cell B119 and continuing downward to at least F200. However, when I add the formulas, the offset reads the formulas as being data and adjusts for that. I do not know how to adjust the dynamic range to ignore formulas in blank cells.
Global Demand-Capacity Management_working (version 3).xlsm
View 6 Replies
View Related
Apr 22, 2006
i have 2 worksheets. Worksheet A has 100 rows on it with information in the first column. However, there are many blank rows e.g
Column A
1
2 matt
3
4 simon
5 paul
6
7
8 mike
9
10
11
12 john
what i need to do is transfer this to worksheet B without copying accross the blank cells, Now the main problem is i want the cells to be linked so i need a formula that finds the next cell with data in it to go in the next cell down. So worksheet B will look like this:-
Column A
1 Matt
2 Simon
3 Paul
4 Mike
5 John
View 3 Replies
View Related
Apr 14, 2014
I have created multiple nametags. I want to use a button which when pressed will run a loop to extract each individual element from the nametag and assigns a value to cell based on that. I have coded for the other functionality that happens when the cell value is changed but can't figure out a way to run the loop.
View 2 Replies
View Related
Jan 20, 2009
I'm using this code to input values into the next available row of columns of A and B.
Range("A65536").End(xlUp).Offset(1).Select
ActiveCell.FormulaR1C1 = Textbox1
Range("B65536").End(xlUp).Offset(1).Select
ActiveCell.FormulaR1C1 = Textbox2
I have this piece of code right under it:
Range("E65536").End(xlUp).Offset(1).Select
ActiveCell.FormulaR1C1 = Range("B65536").End(xlUp).Offset(1) - Range("A65536").End(xlUp).Offset(1)
The value being returned is 0.
What I want that last part to do is take the last row of column B and subtract the last row in column A.
View 9 Replies
View Related
Mar 2, 2014
I'm trying to reference text from one worksheet to another. The data is all in column A on the "Template" worksheet, however the row varies (ie starts at row 5, then 7 the 9 etc). The cell row is always +2 rows on the previous row, and column A.
What can I use to pull across the cells with the information that I want, onto the "Report" worksheet?
View 3 Replies
View Related
Aug 9, 2007
I have a two dimensional database from which I need to pull information based on multiple listbox values (these listboxes are located in a userform). The user selects one or more cars and then chooses from various parameters for that car. The output has to show the results - for example, if Jeep Cherokee and mpg are chosen, the output will be 23 mpg. I need to be able to do this for multiple cars and multiple parameters.
I need for the outputs to be located in a worksheet. I already have the code for setting up the list of cars and parameters selected (this gives me a row and column header), but now I need to be able to cross reference this information to pull the output from the master database. I was wondering if I can use a vlookup function to do this, but I've never used it with 2 dimensional data.
View 14 Replies
View Related
Jun 26, 2012
I am trying to use a lookup to find the quantity of a certain fabric. However, more than one style uses the same type of fabric. Is there a way to do a lookup that retrieves multiple values?
View 1 Replies
View Related
Jul 7, 2009
How can I add an array of values to a listobject, preferably in one big chunk? How can I read a chunk of values from a listobject into an array?
For the latter, I've tried:
View 2 Replies
View Related
Jul 31, 2012
I have a series of tabs in my sheet, the first one is called 'START', the last one 'END', and between them a series of other identical sheets ('Division 1', 'Division 2'... etc). In each of the 'Division' tabs, cell A1 (say) contains a string that I need to retrieve and order into a list on a summary sheet. The order doesn't really matter (i.e. it doesn't have to be alphabetical or anything), though it would be useful if there were no gaps in the list.
View 1 Replies
View Related
May 13, 2013
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
View 5 Replies
View Related
Aug 1, 2013
I need to find average of the values , the count of the cells will be dynamic (may be 5 or even 200).
View 2 Replies
View Related
Feb 28, 2014
I have an excel file and what i want is to sum two different columns to a third one, however there are some important notes:
1. Column A has dates
2. Column B has numbers f.e. 25, 30, 35 etc. , which have to be added to dates of column 1 , so a new date will be created in the new column
3. Colums A and B are not next to each other.
4. Some cells of column A and column B are blank , actually columns are sth like this
A B C
5/2/2014 25
blank blank
8/5/2014 35
10/9/2014 30
blank blank
When a date value occurs in a cell of column A , then always a number will occur in column B
When a cell is blank is column A , then the respective cell of column B will also be blank
What i want is to add values of column A and B to create column C automatically ( each column has 1000 cells ) , however in case of blank cells , i want a blank cell in column C, not something like #####
Apart from this , i want in the future , when i expand column A and B , when values are entered there, i want column C to be created automatically.
View 11 Replies
View Related
Jul 21, 2006
Is anyone aware of some way to use the " dynamic named range approach" to only select the cells with numerical values in a column and name this range?
I've looked at the examples on this site but can't find any solution to this particular problem although I have a feeling that this should be possible.
View 9 Replies
View Related
Jan 26, 2007
How to retrieve value from cells to textboxes, DTPicker, ListBox in a userform ...
View 7 Replies
View Related
Mar 31, 2014
So I have 2 sheets from a much larger worksheet where I wish for the first sheet to extract a row of values, one at a time from the second sheet using a range of numbers I enter as reference for where to look for the data. Sheet 1 can be thought of as a summary page and Sheet 2 is where data is stored.
I need to first check if any data under Sheet 2 column B fall within a specified range of numbers and if any of those numbers are found I want it to grab the largest and latest number from that range and pull all the data from certain columns in that same row and place it into Sheet 1, one column value at a time.
Sheet 1 A1 = A range of numbers as text. 10-15, 16-20 etc Only one range is entered. This also tells me what results I'm looking at.
Sheet 1 B4:B14 = Destination cells for the individual data I'm wanting to pull from Sheet 2 columns H:P. B4 wants H, B5 wants I, B6 wants J etc
Sheet 2 column A = A3:A102 are numbered 1:100.
Sheet 2 column B = A series of numbers anywhere from 10-70. Always in sequence and they can repeat. 10,10,11,12,13,14,15,15,15,16 etc. Ranges from B3:B102. Only one number per cell.
Sheet 2 columns H:P = Data in H3:P102 I want to extract to Sheet 1 B4:B14.
Now lets say I want a formula for Sheet 1 B4 which wants a value in Sheet 2 H. If Sheet 1 A1 = 10-15, I want to check whether Sheet 2 column B has any values equaling those and then tell me which row that last number appeared in.
Example: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5. (B6 is outside range and B4 isn't the last time the 14 appears.)
Then, knowing B5 is the value I want, find which row it is in (row 5 in this example) or use the number in A5 (3) and then find my way to column H (H5) where the value I want to pull is.
Example 2: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5.
Sheet 2 H4=10, Sheet 2 H5=32, Sheet 2 H6=42. Place "32" from H5 into Sheet 1 B4.
I'd like to also have some error control so I'm not trying to pull data from blank cells if it's relevant. Maybe check if Sheet 2 X3=0 and if it is, do nothing as no data appears if the cell is 0.
I have put a lot of time into trying to solve this myself but I feel way out of my depth. I've tried going step by step but I can't seem to figure out which functions are relevant and also things like how to return the range that the A1 values appear in or if using MAX, not having it return values outside of A1's range also.
View 7 Replies
View Related
Jan 25, 2009
s/s is 325501 rows deep. Down one column are values but these are seperated by blank cells.
I need to omit the blank cells so that all the values appear together, but keep them in the same formation (not sorted).
View 6 Replies
View Related
Jan 20, 2014
I have a column which contains unique values and also blank cells between them. These blank cells are associated with the cells having value below them. e.g.
Say we have
COLUMN A
1004Z
blank cell
blank cell
blank cell
blank cell
1031Z
1305Z
1007Z
1046Z
blank cell
blank cell
1400Z
blank cell
1021Z
Suppose these above are 14 cells (A1:A14); I want to merge preceding set of blank cells with the values below them.... in this example I want to merge A2,A3,A4,A5 with value in A6...
Likewise A10,A11 merge with A12 to show value in A12.
I have only one column to merge values like this.
View 2 Replies
View Related
Jan 25, 2009
s/s is 325501 rows deep. Down one column are values but these are seperated by blank cells. I need to omit the blank cells so that all the values appear together, but keep them in the same formation (not sorted).
View 4 Replies
View Related
Jun 19, 2013
I want to show in tab total view the advices for problems which come from a questionnaire. This questionnaire applies to its advices on the basis of given questions of the user. In the advice tab you can see the advice given for each question. Because I have shown in the advice tab in column B if the advice need be in the tab total overview, if this is not the case there is nothing visible there (empty cel). In column C indicated by 1 if the text should be to the overview tab and a 0 if the specified text should not be taken to the tab overview. How can I get in the overview tab only the text from column B which have in column C the value 1 (without the empty cels)? Even when the data in tab advice changes i want that the information in the tab overview also changes.
View 3 Replies
View Related
Apr 1, 2009
A1:A1600 contain either random values or blank cells.
Each time there is a blank, I would like a fresh count placed next to the blank cell in B which counts the populated rows between each blank.
My problem is that I have no idea how to set my count back to zero each time I hit a blank and continue down my column. There is no consistancy between blanks so I need the flexability.
Example
A B
1 14
2 998 2
3
4 3
5 8
6 22 3
7
View 9 Replies
View Related
Jan 13, 2014
I want to be able to pick a word from a drop down list and for related information to appear in the next cell. I just don't know the function to do it.
Here's an example: I have a list of first names and second names in adjacent columns.
Excel question 1.jpg
In the 2nd sheet I have a drop down list of the first names:
Excel question 2.jpg
Is there a function to make the corresponding 2nd name appear in B1 when a first name is selected. I've seen examples where INDIRECT is used to create a dependent drop down list in B1 but I'd like the information to automatically appear.
View 3 Replies
View Related
