I'm looking for a formula that will paste an entire row from sheet 2 into sheet 1 of the same workbook when only 1 cell is typed.
I am trying to come up with a property access log for my guards so when they enter a tag number from(sheet 2 column B) into (sheet1 column D) , it will auto fill sheet1 column C and E with the entries from sheet 2 column A and C.
I remember years ago that I made a couple formulas that on sheet one would transfer to another sheet when I enter in sheet one.
View 5 Replies View RelatedI get this monthly report that has 5 tabs in it. The last tab, ALL_FAILURES_1mon, is a list of part and serial numbers that have failed that month. From that tab I copy the information into a master workbook that houses all the failures broken up by part number, each part number is a separate tab. I am wondering if there is a way to search in the "Monthly_Report" document for all rows containing the part number, 07X-000-ZZZ" and copy the entire row into the master fails list. I have attached a couple examples with sensitive information blocked out.
What I need is for when the macro is run, it will search "Monthly_Report.xlsx" ALL_FAILURES_1mon tab, for "07X-000-ZZZ" and copy all rows containing the part number and paste them in the next blank row of "Master_Fails_List" in appropriate tab.
*NOTE*I have attached both examples however my "Monthly_Report" document was too large so I had to upload it as a .xlsb but the original is .xlsx
I currently have 4 sheets in a workbook. They are... "Main", "Safety", "1 Week Response" and "Routine" I would like to enter data into the "Main" and have it automatically send that data to the corresponding sheet name. Example: On the "Main" sheet I enter in row 1 column "A" the number 520; column "B" I enter Safety. Then I want to push a macro button that sends this data to sheet "Safety" in the next available row.
View 2 Replies View RelatedIn this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
i have a sheet called 'sample database'. it consists of 56 columns, each with a specific title in row 1. i.e. name, surname, mobile_number, and so on.
from row 2 onwards the data has been populated for roughly 200 rows.
i have another 'Capture Sheet' which has the same titles as 'Sample database' except it's in a different format. its a printable form that is given to new employees when they start. once they have completed it it gets captured into the 'Sample Database' sheet.
my wifes boss now wants 1 new sheet for each row in the 'sample database' sheet based on the format/layout of the 'capture form'.
how can i get the 'capture form' to auto populate the data from the 'sample database' sheet and create a new sheet for each row?
i know this is possible i just dont know how to do it.
The two sheets are...
1. Sheet1.xlsx (regular excel sheet as the extension is .xlsx)
2. Consolidated.xlsm (macro enabled sheet as its extension is .xlsm)
1. Copy both the files on your system under a particular folder.
2. Now make 9 replica's of Sheet1.xlsx and name them as Sheet2, Sheet3, Sheet4, .......... Sheet10
3. Open the sheet Consolidated.xlsm and see the button i have added called "Pull Data".
Now write down the code by adding a Module in that excel sheet from the code window.
4. Write a code that will open each of these sheets (Sheet1, Sheet2, Sheet3, Sheet4, .......... so on) one at a time and will copy the data from these sheets to the Consolidated.xlsm sheet.
5. Make sure that the data is appended(and not overwritten) from the multiple sheets (Sheet1, Sheet2, Sheet3). that is once you paste the data from sheet1 to Consolidated.xlsm then the Sheet2 data will be pasted at the end and after that sheet3 data will be pasted and so on..
6. In this way at the end we will have all the data from Sheet1, Sheet2, Sheet3...in the consolidated sheet.
7. The Division column in the Consolidated sheet will have the value of first row in these multiple sheets. So after making the replicas of Sheet1, please change the value in first row (Range A1) to any other value to avoid the confusion.
8. I have highlighted the data for two sheets in yellow and grey color in the consolidated sheet.
I have a number of worksheets and need to move data from the same cells of each work sheet to a summary worksheet. I manually entered the cell id's for the first sheet.
Example =Jan!M6, =Jan!N7, =Jan!O9 etc.
I know I should be able to automatically enter these same cells for the remainder of my worksheets with out manually going in and typing each one (there are a lot of entries.) I just can not remember how to do it. The next sheet is named "Feb" and "Mar" etc.
i'm trying to get data added in one sheet of a workbook to automatically be entered into another sheet. such as a monthly, Quarterly and Annual balance sheet.
View 3 Replies View RelatedHow to get an automatic macro to run from my first sheet (sheet 1 of 10).
However, on my first page, users must enter 36 numbers in exact order and then those numbers need to automatically be copied to start at A3 on my following 9 sheets.
Can I set up my workbook so that the formula Auto Calculation works on one of the sheets, but the other two sheets only calculate on saves.
I have three sheets in a workbook. 1 of the sheets is used for data entry and there are quick small visual formulas on that sheet that make data entry easier and produce mistake double checks. But the other two sheets are formula intensive and take a few minutes to calculate which is fine considering it only calculates on save. But I need to be able to have the one sheet calculate automatically while these other two are only on save.
Is it possible to have a code that will hide a specific sheet everytime I will close the workbook?
View 3 Replies View RelatedI have a work sheet with the datas as below
A B C D
E ------- so on.
1 P.O.# STYLE# ORD.QTY PRICE VALUE ............ etc...
2 P-150 ABT-5 500 $2.50
$1250.00.............etc
3
4
5
6
....
....
.....
goes on....
I have more than 1000 entries in an year
Now I need the following to be worked out in the next sheet
A B
1 P.O.# Here I have to select the P.O Nos what is entered
in the data sheet
2 INVOICE NO Here the relevant Invoice No. for what I selected as above
should apper
3 VALUE Same as above
6 AMT RECD
8 BALANCE TO RECEIVE
I've created a chart in sheet 1 in a workbook. I want to copy and paste that chart into another sheet (lets take sheet 2) of the same workbook. I am using Excel 2010 version.
Whenever, I try to copy a graph and want to do "Paste Special as Link picture". The problem I am facing as "Paste Link" option is inactive.
I am attaching the Excel for your reference.
I want to end up with is when I type text in any row of the Master sheet, I would like the entire contents of each row to automatically be repeated on the worksheet of the same name (as per column O). For example row 5's contents from the Master sheet would duplicate into the sheet named Accommodation. In addition, should the details ever change in the Master, this would need to be reflected in the individual sheets also. My only concern is that I'd like the individual sheets to fill from the top rather than match the exact row number position from the Master, ie row 5's contents to be placed into row 2 of the Accommodation sheet seeing as it's the first occurrence, and row 6's would go into row 3 etc.
View 2 Replies View RelatedI want to end up with is when I type text in any row of the 'Master' sheet, I would like the entire contents of each row to automatically be repeated on the worksheet of the same name (referred to by text entered in column O). For example row 5's contents from the Master sheet would duplicate into the sheet named 'Accommodation' as O5 contains the word Accommodation.
In addition, should the details ever change in the Master, this would also need to be reflected in the individual sheets. My only concern is that I'd like the individual sheets to fill from the top rather than match the exact row number position from the Master, ie if row 5 had the first occurrence of the word Accommodation in column O, the contents of that row would be placed into the next available first blank row of the Accommodation sheet, which in this case would be row 2 as the headings are on row 1.
I want to do the following -
Whenever I enter a value say "X" in Sheet1, ColumnA I want the value to be autofilled into sheet 2, ColumnA if and only if value does not exist in sheet2, Column A.
How to achieve this in Excel 2007 ?
So im setting up a big list of stuff, and basically i have multiple sheets.
One of them is a "master sheet" so to speak, and the rest are sub-sets of data.
Is it possible to have the Master sheet updated automatically every time data is entered on one of the sub sheets?
Basically its an alphabetical list of names, and my sheets are "Master sheet" "sheet A, Sheet B" etc .... so If I enter a name on Sheet B, or format the cells on sheet B, is it possible to have that automatically copied to the master sheet?
its becoming a pain to have to enter the same name on two sheets manually.
I have workbook having around 25 sheets and i want macro to merge all sheets except first (summary) in to last sheet ( mergedata ) inpute data will be start from cell A17 in all sheet. also sheets may be add or delete as per requirement. after merge data from sheet name should add after each entry .
attached sample file for your reference.
[URL]
I am trying to auto-populate a table with data looked up from another sheet. The functions I have used are: Data Validation, vlookup, ISerror and if functions.
Cell B4 in sheet2 uses Data Validation to pick data from sheet1 (in this case "tax") and auto populate the table with the information- Job type, Name, employee type and Job title. If i change from Tax to HR, the table should get auto-populated with the correct information.
I have setup vlookups but I am unable to get it working. I am a novice at using vlookups (I learn it just 2 days ago) and am struggling to get it work. I am not even sure if vlookup is the right tool to get this job done.
I'm trying to create a rental data base. The Items in question have 2 details, a Pokemon and a Gender. Each item also has a location but this changes.
So far the search formula works nicely, but there needs to be some way to know what items have been removed from their locations.
There needs to be some way to change the location on the 'database' sheet layer to "OUT" from the 'search' sheet layer.
E.g. (on the example file attached)
In a perfect world I would like to be able to search for a couple of pokemon, then to click on "pokeball GO!!!" and for this to change the location to "out" on the 'database' sheet layer.
I have a sheet which is list of prizes. Column B represents the type of auction this could go to Column C represents the type of prize and Column D the name of the person responsible. The other 4 sheets is for the live auction, the silent auction, the raffle and goodies prizes
If on sheet 1 the type of auction is SA, I'd like Column B, C and D to be reflected in the Silent auction sheet (List SA)
If on sheet 1 the type of auction is LA, I'd like Column B, C and D to be reflected in the Live auction sheet (List LA) and same for Raffle (R) and Goodies (GB)
macro which autofilter data & copy to another sheet.
below mention are the steps, i dont knw how to write vb code to autofilter month. Please find sample workbook on
below mention link
[url]
1.Auto Filter Date 2(Column C)
2.Select First Month (eg.May 09)
3.Auto Filter Date 1 (Column B)
4.from, the month, which filter in Date 2 (from May 09 to Dec 09..last month of year)
5.Auto Filter Column A
6.Copy each unique value on output sheet
I just want to check that if it is possible to copy specific cells from one row to another sheet by using macro or any other script.
Attached is a sheet which explains what exectly I want
The sheet one is having Source data
Sheet three is the result sheet
If I put some code numbers (in number form) it should search the data from source sheet and update the same in result sheet in different rows
I am trying to auto populate one spreadsheet from a master sheet
What I am trying to do: I have a master sheet where information on 25 countries is entered. Sheet has multiple columns for data entry I have 25 additional identical spreadsheets that correspond to one of the 25 countries so can drill down to country specifics
From the master - is it possible to select a country from a drop down menu so when I start entering data on the master it auto populates the corresponding sheet by the country selected.
I have a master list. I want to create an excel sheet that will follows when I key in the code number according to the master list all the rest of the value in the master list will automatically populate accordingly into their respective sequence into the created excel sheet.
Eg.
Master list
A B C D
0001 Lucy 8 Walton primary
0002 Rachel 9 Dermouth primary
The created excel sheet
Code 0001
Name Lucy
Age 8
School Walton Primary
I want to key in the code 0001 and the rest of the value will auto populate from the master list into the created excel sheet. The master list data go in accordance row by row. That means the master list is listed in a sequence where all the related value for the particular code into one row only.
I am trying to create a transfer of data from one worksheet to another, where Column G is where new data will be entered. I have a macro to sort the data (works great!!), but it is just getting it from one worksheet to another without having formulas in the cells - which can be deleted by my co-workers - to pull the data from one sheet to another.
I do not know if this can be done automatically or not, or if info is updated on one worksheet vs another - if then it will transfer the text.
Example:
(A2)LAST NAME (B2)1ST NAME (C2)RES# (D2)HOUSE (E2)DOB (F2)JOB (G2)SPECIAL
(A3)DOE (B3)JOHN (C3)112233 (D3)1 A2 L (E3)10/10/75 (F3)YES (G3)DR APPT
There are over 300 entries - one row new record. The CommandButton1 works great that I have for compiling and deleting unused rows.
But now I need something to get the data to the blank worksheet to compile data from Column G without formulas in the cells. This was one I found online, tried to adjust it to fit what I need, but I cannot get it to work.
Sub CopyRow(ByRef Target As Range)
Dim DstEnd As Range
Dim DstRng As Range
[Code].....
I've created an excel workbook to automatically create a report for my work. All you have to do is enter the data into the "DATA" worksheet. Easy. Only problem is that someone can easily ruin it if they try to run it when the "DATA" sheet is empty. I figure that if I can get two columns hide when it's empty and that would solve my problem. I've tried several VBA codes, but they don't work. Also, everything except the "DATA" sheet is protected to prevent accidently changes. This is the latest code I've tried:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "DATA!$P$5" And Target.Value = 0 Then
ActiveSheet.Unprotect ("password")
[Code].....
I have two sheets
1. On one I have sheet named leave with five columns
2. Second sheet has calender
Sample file is attached for reference sample.xlsx
What I want is that as i enter leave dates on sheet "Leave" corresponding rows on calender sheet should highlight and important thing is if i change the name row highlight should change automatically. This i could achieve with following function
[Code] .....
The problem here is that it does it once but for second time it does not show...
I have been tasked with creating a workbook that will take a time log file (excel) from an electronic time clock and import the dates/times into individual employee timesheets. The timesheet layout has already been provided to me and cannot change.
I’m really struggling here and would appreciate any help.
Please reference the attached workbook for the issues described below:
1) Sheet "1_attlog" is the log that is imported from the electronic time clock.
2) Sheet "Sorting & Filtering" is what I have developed so far that manipulates the data from sheet "1_attlog" into something that can be easily understood, it also matches employee #'s to a name, and allows for date ranges to be set that copies over to the individual timesheets. Please do not change any formulas on this page if possible.
3) Sheets "#2 Dan through #10 Blank" are all individual employee timesheets that I need to import the data from "Sorting & Filtering" and populate the "Time In" (column D) and "Time Out" (column G) based on matching the data from "Sorting & Filtering" sheet, "Time Clcok ID" (column D) "Date" (column E), "Time In" (column F), "Time Out" (column G), "Emp Name" (column I).
The dates on the individual timesheets have been linked to the "Date Range" (cels F2 & F3) on the "Sorting & Filtering" sheet, please keep this link intact.
4) The individual timesheets already have formulas inplace to calculate the hours worked after the "Time In" and "Time Out" data has been imported.