Auto Calculation On Sheet But Not Workbook
Feb 11, 2013
Can I set up my workbook so that the formula Auto Calculation works on one of the sheets, but the other two sheets only calculate on saves.
I have three sheets in a workbook. 1 of the sheets is used for data entry and there are quick small visual formulas on that sheet that make data entry easier and produce mistake double checks. But the other two sheets are formula intensive and take a few minutes to calculate which is fine considering it only calculates on save. But I need to be able to have the one sheet calculate automatically while these other two are only on save.
View 1 Replies
ADVERTISEMENT
Jun 30, 2013
I'm looking for a formula that will paste an entire row from sheet 2 into sheet 1 of the same workbook when only 1 cell is typed.
I am trying to come up with a property access log for my guards so when they enter a tag number from(sheet 2 column B) into (sheet1 column D) , it will auto fill sheet1 column C and E with the entries from sheet 2 column A and C.
View 8 Replies
View Related
Feb 15, 2014
How to get an automatic macro to run from my first sheet (sheet 1 of 10).
However, on my first page, users must enter 36 numbers in exact order and then those numbers need to automatically be copied to start at A3 on my following 9 sheets.
View 3 Replies
View Related
Oct 19, 2012
Is it possible to have a code that will hide a specific sheet everytime I will close the workbook?
View 3 Replies
View Related
Mar 26, 2014
I get this monthly report that has 5 tabs in it. The last tab, ALL_FAILURES_1mon, is a list of part and serial numbers that have failed that month. From that tab I copy the information into a master workbook that houses all the failures broken up by part number, each part number is a separate tab. I am wondering if there is a way to search in the "Monthly_Report" document for all rows containing the part number, 07X-000-ZZZ" and copy the entire row into the master fails list. I have attached a couple examples with sensitive information blocked out.
What I need is for when the macro is run, it will search "Monthly_Report.xlsx" ALL_FAILURES_1mon tab, for "07X-000-ZZZ" and copy all rows containing the part number and paste them in the next blank row of "Master_Fails_List" in appropriate tab.
*NOTE*I have attached both examples however my "Monthly_Report" document was too large so I had to upload it as a .xlsb but the original is .xlsx
View 9 Replies
View Related
Jul 1, 2008
i have a workbook with about ten sheets. These ten sheets have an estimated 500+ formulas each - the feed (calculate) from data on two data sheets. I now have a total of twelve related sheets that work together. I also have one additional sheet for various work named MiscWork - this sheet is NOT affiliated with the other twelve sheets.
my issue is whenever data is added, calculated, or even moved, excel recalculates ALL formulas; even on the unaffiliated twelve sheets. how do i force excel to only calculate the formulas and related data that has changed?
View 9 Replies
View Related
May 20, 2008
How to use macro to build a calculation in excel using macro, so every time I type a number another cell it has value calculated without click "run" macro.
For example, I want to sum value in Range from F8 to FinalRow automatically, For example, I fill in 3 in D8, 4 in E8 and F8 show value 7; I fill in 4 in D9, 9 in E9 and F9 show value 13.
What is code for this?
View 9 Replies
View Related
Mar 5, 2012
I don't want my sheet to auto calculate every time I change a cell that has nothing to do with the range I want to calculate. What would be the code to only have auto calculate run in range("A13:L17") when a worksheet_change happens in range("A13:L17").
View 9 Replies
View Related
Jan 16, 2003
i have 100 rows of data. when i use the autofilter my data changes to 15 rows. how can i write the median formula in cell B16 to find the median of the 15 rows of filtered data?? i am currently using this formula to find the average, =subtotal(1,B1:B100), but i cant figure out a way to do it for the median.
View 9 Replies
View Related
Apr 21, 2014
What I want to do is place a lap time into 2 columns (representing each lap), then excel chooses the lowest number in the two columns on the same row, paste it into another column, and then automatically sort, while keeping the first column static for 1, 2, 3, 4, 5 etc
So what I want is
Column A | Column B | Column C | Column D | Column E
1 | Driver Name | 14.004 | 14.102 | 14.004
I want Column A to remain in tact, never changing, 1-50. I want Column E to hold the fastest lap time calculated from C and D. Then I want excel to automatically sort Column E from lowest to highest, while keeping Column B with a specific driver name in line with their respective lap times. Column A is not a 100% solid requirement, but auto sorting Column E after it's calculated the minimum value of C and D is.
View 11 Replies
View Related
Jul 20, 2014
I've created a chart in sheet 1 in a workbook. I want to copy and paste that chart into another sheet (lets take sheet 2) of the same workbook. I am using Excel 2010 version.
Whenever, I try to copy a graph and want to do "Paste Special as Link picture". The problem I am facing as "Paste Link" option is inactive.
I am attaching the Excel for your reference.
View 2 Replies
View Related
Aug 2, 2006
I have this workbook that has around 12-15 worksheets. At present there is a formula that takes a arugument called "Calc". now it is set to automatic recalculate in the prefereneces. so whenever i change a sheet i have to then go to another sheet to where the calc field resides and just change the number to any number other then zero and immediately it calculates all the sheets in the workbook.
So now,I want to recalculate only one sheet at a time instead of all the sheets and also dont want to depend on the calc field of another sheet. So i made the preferences to manual and checked the box that says 'recalculte on save'. and also in the function gets () im replacling the calc to '6'. And for each sheet in vba- i wrote:
Private Sub Worksheet_Change(ByVal Target As Excel. Range)
ActiveSheet.Calculate
End Sub
But when i do alt+s to save it just saves but does not recalculate. how do i make it recalculate when it saves..
View 2 Replies
View Related
Dec 1, 2006
I have a report whose calculation time I've reduced greatly by turning off automatic calculation and including in the worksheet code directions to only calculate the impacted range. BUT, it still takes a lot of time to calculate on close, when I turn automatic calculation back on. I'm afraid my users will think their machines have crashed. Does anyone know of a way so that on close, the workbook does not calculate, even though Calculation is turned back on to automatic?
Private Sub Workbook_Activate()
With Application
.Calculation = xlManual
.MaxChange = 0.001
.CalculateBeforeSave = False
End With
End Sub
Private Sub Workbook_Deactivate()
With Application
.Calculation = xlAutomatic
.MaxChange = 0.001
End With
End Sub
View 2 Replies
View Related
Sep 29, 2011
I have a range of cells ( C2, C5, C8:N1007, P8:P1007 ....) on a worksheet that I want to be able to clear the contents of through a macro - worksheet is entitled Database
I have 3 additional worksheets all of which have summary information on and some of the formulas are huge.
I've inserted a module and produced this code;
Sub ClearContents()
Application.Calculation = xlCalculationManual
Range("C2, C5, C8:N1007, P8:P1007, ....").ClearContents
Application.Calculation = xlCalculationAutomatic
End Sub
Because of all the 3 summary page formulas the code is taking a few seconds to run.
I'm new to VBA and just wondered whether I could switch the calculation setting for the entire workbook onto manual at the beginning of the code and then switch it back to automatic at the end of the code? Think this might speed things up.
View 5 Replies
View Related
Jul 1, 2014
The two sheets are...
1. Sheet1.xlsx (regular excel sheet as the extension is .xlsx)
2. Consolidated.xlsm (macro enabled sheet as its extension is .xlsm)
1. Copy both the files on your system under a particular folder.
2. Now make 9 replica's of Sheet1.xlsx and name them as Sheet2, Sheet3, Sheet4, .......... Sheet10
3. Open the sheet Consolidated.xlsm and see the button i have added called "Pull Data".
Now write down the code by adding a Module in that excel sheet from the code window.
4. Write a code that will open each of these sheets (Sheet1, Sheet2, Sheet3, Sheet4, .......... so on) one at a time and will copy the data from these sheets to the Consolidated.xlsm sheet.
5. Make sure that the data is appended(and not overwritten) from the multiple sheets (Sheet1, Sheet2, Sheet3). that is once you paste the data from sheet1 to Consolidated.xlsm then the Sheet2 data will be pasted at the end and after that sheet3 data will be pasted and so on..
6. In this way at the end we will have all the data from Sheet1, Sheet2, Sheet3...in the consolidated sheet.
7. The Division column in the Consolidated sheet will have the value of first row in these multiple sheets. So after making the replicas of Sheet1, please change the value in first row (Range A1) to any other value to avoid the confusion.
8. I have highlighted the data for two sheets in yellow and grey color in the consolidated sheet.
View 8 Replies
View Related
Dec 30, 2007
This is about the attached sheet where I have a command button and I would like to have the below results.
When the command button "Calculate" is pressed then
Using the amount from col "G" and the reduction from col "H" in the amount in col "A" and the reduction in col "B" for all the lines.
Identfy the lowest value in col "A" -greater than zero- along with the related duration to be placed in the corrosponding columns "I" and "J"
View 9 Replies
View Related
May 1, 2009
I have 40000 rows filling with data from column a to g, autofilter is alway on on said columns , the problem is that when I select any column to filter data as per my query , it takes long time to display result and sometimes it hangs with the msg xyz workbook is not responding.
View 9 Replies
View Related
Feb 5, 2013
I have a workbook (Book B) I want to take information from and Auto populate into another (Book A) if the Type e OR Type f are marked. But only need certain column information from Book B. Let me know if there are any questions I am unsure how better to exlain.
Book B.xlsxBook A.xlsx
View 1 Replies
View Related
Mar 24, 2014
I want a specific workbook to be always on manual but when I open other workbooks I want them to remain on automatic even though the first workbook is set on manual through vba code. Is that possible to be done?
This is the code I run:
Private Sub Workbook_Activate()
With Application
.Calculation = xlManual
.MaxChange = 0.001
.CalculateBeforeSave = False
[Code] .....
I know that Application. Calculation refers to all open workbooks but I don't know the code to specify the manual calculation to this workbook only while others are open.
View 7 Replies
View Related
Mar 1, 2014
In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
View 6 Replies
View Related
Dec 19, 2008
I want to end up with is when I type text in any row of the Master sheet, I would like the entire contents of each row to automatically be repeated on the worksheet of the same name (as per column O). For example row 5's contents from the Master sheet would duplicate into the sheet named Accommodation. In addition, should the details ever change in the Master, this would need to be reflected in the individual sheets also. My only concern is that I'd like the individual sheets to fill from the top rather than match the exact row number position from the Master, ie row 5's contents to be placed into row 2 of the Accommodation sheet seeing as it's the first occurrence, and row 6's would go into row 3 etc.
View 2 Replies
View Related
Dec 19, 2008
I want to end up with is when I type text in any row of the 'Master' sheet, I would like the entire contents of each row to automatically be repeated on the worksheet of the same name (referred to by text entered in column O). For example row 5's contents from the Master sheet would duplicate into the sheet named 'Accommodation' as O5 contains the word Accommodation.
In addition, should the details ever change in the Master, this would also need to be reflected in the individual sheets. My only concern is that I'd like the individual sheets to fill from the top rather than match the exact row number position from the Master, ie if row 5 had the first occurrence of the word Accommodation in column O, the contents of that row would be placed into the next available first blank row of the Accommodation sheet, which in this case would be row 2 as the headings are on row 1.
View 9 Replies
View Related
Nov 14, 2009
What is the best way to name / order worksheets in a workbook to improve load / calculation speed?
View 13 Replies
View Related
Aug 20, 2009
Example: I have Sheet 2 set to autocalculate on activate using vb. So when you click on that tab "Sheet 2" it will autocalculate.
My Question is, I have another macro that is copying information between Sheet 1 and Sheet 2. And I don't want calculation to occur during the macro but since it has to select Sheet 2 it performs the autocalculate. Do I have any options to prevent the calculation from occuring when I run my copy paste macro? I only want it to autocalculate when the user selects sheet 2
View 4 Replies
View Related
May 17, 2014
how to further formulate wages calculation.
I made a time sheet which calculates number of hours worked and so on. Now I would like it to calculate the wages as well. The problem is that there is a higher payment for nights.
- $16 per hour on regular hours
- $24 per hour from 23:00 to 07:00
How can I formulate it that I get the total payment taking into consideration nights?
View 4 Replies
View Related
Oct 10, 2008
Is there any way to automate the calculation of a single sheet? IE to calculate when moving from cell to cell after entering data without calculating the whole workbook and any other open workbooks.
View 9 Replies
View Related
Feb 9, 2012
I want to do the following -
Whenever I enter a value say "X" in Sheet1, ColumnA I want the value to be autofilled into sheet 2, ColumnA if and only if value does not exist in sheet2, Column A.
How to achieve this in Excel 2007 ?
View 1 Replies
View Related
Mar 19, 2008
i have a sheet called 'sample database'. it consists of 56 columns, each with a specific title in row 1. i.e. name, surname, mobile_number, and so on.
from row 2 onwards the data has been populated for roughly 200 rows.
i have another 'Capture Sheet' which has the same titles as 'Sample database' except it's in a different format. its a printable form that is given to new employees when they start. once they have completed it it gets captured into the 'Sample Database' sheet.
my wifes boss now wants 1 new sheet for each row in the 'sample database' sheet based on the format/layout of the 'capture form'.
how can i get the 'capture form' to auto populate the data from the 'sample database' sheet and create a new sheet for each row?
i know this is possible i just dont know how to do it.
View 9 Replies
View Related
Jan 18, 2010
I have a large XLS file will a lot of volatile functions (offsets & sumproducts) and I've recently had to add a sheet, making it even bigger. I have a problem that previously occured occasionally but now it happens consistently. Every time the workbook is recalculated, the Excel window is repainted with partial overlays of every visible worksheet. The result is a visual mess. The window's appearance is fixed by doing anything that forces Excel to repaint again, like clicking to another sheet and back. But it has become next to impossible to enter data with automatic calculation turned on.
ScreenUpdating is turned off when my macros run and besides that, I'm not doing anything with worksheet calculation events. I do have a Workbook_SheetChange event subroutine, but that is run *after* the recalculation so it's not the cause.
The problem occurs only when macros are enabled. If I disable macros, Excel behaves normally.
I have two Excel installations and the problem is happening only in Excel 2007 under Vista. It doesn't happen under my Excel 2003 on XP, though I think it may be happening to others with 2003 & XP.
View 14 Replies
View Related
Feb 22, 2014
I am having trouble copying and pasting the results of a calculation on one sheet to another sheet. I believe my problem is that my destination cell is actually two cells merged so the destination is obviously not the same size as the source. Here is the section of code I am working on:
Code:
Sub CalculateDeviceFailureTimes()
'
' Used to manipulate the UEM data file to find the outage times of different devices in the Astro System
'
Dim Output As Integer
[Code] .......
Like I said the section after the initial 'If' works and 0:00:00 is entered into the cell D15 with no issue. My problem comes when I try to copy the result of the formula in 'G3' to 'D15'. Like I said I believe my problem is that 'G3' is a single cell and 'D15' is two cells merged..
View 3 Replies
View Related
