Auto Hiding Rows With Zero Values

Apr 6, 2014

I'm using the following code to hide rows with zero values in my workbook. I have 10 sheets for potential data/products and a "summary" sheet that is set up to pull all the information from the 10 sheets. I often don't use all 10 sheets so there are a lot of blank cells. I set up the code below to hide zero values to make the "summary" sheet easier to work with. I am encountering a problem with cells that are formatted as dates. a zero value/empty cell shows up as 1/0/1900 and is therefore not auto hidden.

Either any adjustment to my formatting or code to automatically hide these blank date cells on the "summary" sheet?

Code:
Private Sub Worksheet_Change(ByVal Target As Range)Dim c As Range
For Each c In Range("C3:C8778")
If c.Value = "0" Then
c.EntireRow.Hidden = True

[Code] ...........

View 4 Replies


ADVERTISEMENT

Hiding Rows Based On Multiple Values

Aug 7, 2012

I've tried several approaches on how to code this, but can't figure out how to work it. I have a large spreadsheet; which dynamically changes in both column and row counts. So, I have an array of values. If any cell has a negative value, that cell text needs to be changed to red AND that row needs to remain displayed. If ALL values in that row are >=0 then the row can be hidden.

The array is actually a pivot table named QTD

For Example: If cell D5 = 5 and F5 = -3 then Row 5 should remain displayed.

If Cell D6 = 5 and F6=0 then row 6 should be hidden because all values are > 0

Then I was thinking of using the case statement to hide the rows but can't figure the syntax. I'm open to any other means of performing the taks as long as the initial array dynamically to encompass all the data.

View 7 Replies View Related

Hiding Particular Rows By Comparing Values In Array?

Mar 25, 2013

I need to hide the rows in an excel whose value is equal to the array list that has been already hardcoded...How to do this...

View 1 Replies View Related

Automatically Hiding Rows Without Values In Certain Cells?

Mar 23, 2012

Does Excel have the ability to automatically hide rows without values in certain cells?

For example:

Sheet1

ABC1Route NumberTechnicianNumber of Units Cleaned25Tony237Don749 511Ray12613James16715Chuck21817

In this example, Rows 4 and 8 would automatically be hidden, leaving the other rows displaying. Of course, somehow I'd have to "Unhide" these rows at some point to add data if needed.

This is for a spreadsheet that is about 500 rows. Conceptually, I would automatically hide the rows w/o data in column B, analyze (or print) the worksheet, then "Unhide" the columns to enter data the next day.

View 2 Replies View Related

Hiding Rows In VLOOKUP Sheet Based On Null Values

Dec 30, 2013

I have created a spreadsheet from a master using vlookup. I want to be able to hide rows which contain a null value (NA) in column B (sample attached). Is there a formula I can use which won't interfere with the vlookup or do I need to hide the rows individually? I tried filtering but that only filtered the cell and not the whole row.

test sheet.xlsx

View 3 Replies View Related

Auto-filter Hiding Totals Row?

Dec 6, 2009

My data is as follows:

- Column Titles on row 9, columns A - CQ
- Data from Rows 10 - 46
- Totals on Row 47

I have set an Advanced Filter range of A9:CQ46. However, when I use the autofilter, it hides my totals row, row 47. That row is supposed to show the totals for the visible cells above it.

View 3 Replies View Related

How To Create A Macro To Auto Group Rows That Has No Numerical Values

Apr 17, 2014

creating a Macro to automatically group rows that has no numerical value, for example:

1. 13.4
2. 0
3. 0
4. 33.3
5. 0
and so on...

So for this exercise I need excel to automatically group row 2, 3 5 with one click, and leave other rows with actual numbers visible on the sheet.

View 2 Replies View Related

Auto Hiding Zero Date For Graphs And Charts

Feb 16, 2009

I've got 100's of different graphs the problem is i'm currently manually updating them all, a simple example of the data is: ....

View 9 Replies View Related

Hiding Redundant Values From Multiple Sets Along With Adjacent Values

Aug 2, 2013

I am working on creating a spreadsheet that can be updated by those unfamiliar to excel. I have a master list on one sheet and three separate lists for business, individual, and general. Each list has three columns giving name, address and postal code. There are numerous repeats on these lists and I wanted to hide any duplicates while keeping my cells aligned. So far I have been able to highlight any duplicates, but was interested in some function that would save at least one duplicate while hiding any additional ones.

View 2 Replies View Related

Code For Deleting Rows Verses Hiding Rows

May 25, 2013

The first code hides everything just fine based on the date in A1. When I change it to the second code to delete instead of hide it is leaving a bunch of rows that the 1st code hides. Both codes have the same search criteria.

Code:
For Each cell In Range("B8:B5000") If cell.Value Range("A1").Value Then cell.EntireRow.Hidden = True
Next cell

Code:
For Each cell In Range("B8:B5000") If cell.Value Range("A1").Value Then cell.EntireRow.Delete
Next cell

View 4 Replies View Related

Hiding Rows...

Jul 1, 2009

I have two command buttons, and need one macro that would hide all blank rows between columns "E" and "O" and from row 9 to 42, and then another macro that would unhide all these rows again.

View 2 Replies View Related

VBA For Hiding Rows?

Oct 29, 2012

I am building a real estate model. What I am trying to do is the following:

If I enter the number of tenants in a cell (let's say the number of tenants is 6 and the cell I enter this number in is cell J11), I would like 6 of 15 rows to be shown below (rows 46-60). Therefore, the 9 unused rows (rows 52-60) would be hidden from sight. Furthermore, if I entered the number 3 for the tenant count, excel would hide 12 rows (rows 49-60). I am sure that this is a VBA code.

View 1 Replies View Related

Hiding Rows With A Cell Containing 0

Oct 25, 2006

a bit of code so that when I open a sheet (which takes data from another sheet) it hides rows which contain a zero in a certain cell?

View 10 Replies View Related

Hiding/Unhiding Rows

Feb 8, 2010

I have a problem with hiding and unhiding columns. Is there a way wherein I can automatically hide the row(s) if the cell = "N/A" and will unhide if it's not equal to "NA". see the attachment Im using excel 2003 btw. You can see in Sheet2 to that it contains the table for the student grades. "N/A" means that they are not enrolled on that subject. While in sheet1, What I want to happen is that you will select a student name and below, it will automatically display the grades of the student on their enrolled subjects only. So, those fields with "N/A" will hide and when I update the value of N/A it will unhide.

View 5 Replies View Related

Hiding Rows Based On Value

Apr 22, 2014

The attached sheet takes information from another sheet in my work book (I am only providing the sheet I was to work with). I want all rows where the value in F is 0 to hide automatically.

Attached File : Book2.xlsx‎

View 3 Replies View Related

Hiding Blank Rows

Feb 1, 2010

I have had great success using this code to hide and unhide unused space, but for some reason this morning it broke. Most likely it is my error so I am looking for another solution to resolve the issue. What i would like to be able to do it hide an entire row based on a specific cell being blank. maybe that is what this code is supposed to do but like i said it broke this morning. the cell in ref in the code is unchanged, but i did add formulas to some other cells in the same row. this is why i am looking for a way to do the same thing but based on a specific cell being blank vs what is occuring now.

View 4 Replies View Related

Error 424 When Hiding Rows

Feb 2, 2010

I have some vba code that is used to hide any rows with the cell value of "Finished". The code is below. When I run this code I get a run time error 424 - Object Required. Can you please explain or help as to why I am getting this?

As a side point the data is loaded from an oracle database rather than from the sheet but every other function/code works fine.

View 12 Replies View Related

VBA Hiding Rows With Asterisks

Jan 1, 2012

I have a worksheet with 4000 rows and only 4 columns.

In quite a lot of the rows in column 2 there are asterisks (**'s).

I have to print out the report without these rows.

First i would like to hide the rows and print the report

Second i then need to delete the rows if there is no data in column 4

View 4 Replies View Related

Hiding Rows Based On Value?

Mar 27, 2012

Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address(False, False) = Sheets("Sheet2").Range("A3") Then 'A3 is the cell where your Yes/no choice is
Select Case Target.Value
Case "Yes": Sheets("Sheet1").Range("A7:A22").EntireRow.Hidden = True
Case "No": Sheets("Sheet1").Rows("A7:A22").EntireRow.Hidden = False
End Select
End If
End Sub

View 5 Replies View Related

Hiding Only Specific Rows Using VBA

Jun 15, 2012

I have a spreadsheet where I have a simple formula. The formula is IF($A2=$B$2,1,0), and then I drag down to the bottom of the spreadsheet, so whenever it matches it shows a 1.

Now, what I need to do using VBA is hide all the rows that do not have 1's on them. I know how to start the VBA, but not how to finish

Code:
Dim LR as Long
LR = Range("A2").End(xlDown).Row

Because that will allow me to only select the row field that I want to do the Macro on. So, how do I go about hiding rows that only have 0's in them.

View 2 Replies View Related

Hiding Rows Through A Macro

Dec 4, 2006

i'm having trouble hiding rows through a macro. In this case, i'd rather use a macro than use autofilter....

i would like a macro that does the followings...

1. for each row in worksheet (up until row 2000), if the value in the first cell = YES, then hide row, otherwise, leave row as is...

View 9 Replies View Related

Automatically Hiding Rows

Jan 11, 2007

in worksheet "sheet1" I have my inputs... in "sheet2" I have my outputs... my inputs could be anything from 1 to 1000 therefore my outputs would be 1000... on the output sheet, below the last line, i have a whole bunch of text and calcs that I will always need at the bottom... what i would like to happen is if I put in "sheet1" b2 a number, say 5, then "sheet 2" would hide rows 10 to 1005 or if i put in "sheet2" b2 say 925, it hides 930 to 1005...

I created a macro, but it doesn't work at all... and i want it to work automatically without me pushing run macro...

View 9 Replies View Related

Hiding Rows When Blank

Sep 25, 2007

how to hide rows that are blank as a result of formulas in that row returning "".

I have rows between A10 and A80 that I need to test for blank as above an automatically hide them if they are "". I need to redo this each time I view the sheet

Be gentle, I am just a VBA newbie and havent quite finished reading Bill Jelens excellent VBA book purchased on this site.

View 9 Replies View Related

VBA For Hiding/unhiding Rows

Sep 27, 2007

For data validation lists B27 to B30, if any of them is equal to "EBS via ULL" then unhide rows 31 to 42.
If any of the data validation list not equal to "EBS via ULL" then unhide row 44 and hide rows 31 to 42.
If "EBS via ULL" and any other product in the lists is selected, unhide rows 31 to 44.
If validation lists B27 to B30 are all equal to "Select Product..", then hide rows 31 to 44.
I would like to use the worksheets_change event.

View 9 Replies View Related

Hiding Sheets And Rows

Aug 8, 2008

Why this doesn't error but yet it doesn't work either.

Sheets("2 plans, 3 plans, 4 plans").Visible = False

Sheets("1 plan").Range("a26:a416").EntireRow.Hidden = True

View 9 Replies View Related

Hiding Zero Rows Lines

Jun 16, 2009

In the above format (Excel file) i have to hide all the Zero rows one by one.

Please provide me any formula or a macro through which i can hide all the Zero rows instantaly in one go.

View 9 Replies View Related

Hiding Of Empty Rows

Apr 26, 2006

How do I go about hiding empty rows in a separate linked sheet? To be more precise, I'm working on 2 sheets now. Sheet 1 would be the input sheet and sheet 2, the output sheet. For instance, there are 10 rows of data in Sheet 1, but out of this 10 rows, I planted data only into 4 rows. How do I ensure that Sheet 2 hides the empty rows (5th - 10th)?

View 2 Replies View Related

Hiding Rows Using A Combo Box And VBA

Aug 18, 2006

I have inserted a combo box on Sheet 1 with two options in the dropdown ('A' and 'B'). I would like to write a macro to assign to the combo box so that if the user selects 'A' from the dropdown, rows 1-3 are hidden on Sheet 2, and if 'B' is selected, rows 4-6 are hidden (with rows 1-3 unhidden). I have tried unsuccessfully to write any script that even comes close!

View 6 Replies View Related

Hiding The Duplicates Values..

Sep 4, 2009

I'm trying to hide all but one duplicate value in a list; I have a report that can give multiple results for each record, but to make it cleaner to read I want to hide the duplicate values, such as customer names etc. after they have first appeared. I'm aware this may not be a very clear explanation so have attached an example spreadsheet.

The left-hand list is similar to what I would start with and the right-hand list is what I am looking to achieve. Conditional formatting will format duplicates but will obviously all to all and can't use the remove duplicates function as it will take away the unique values alongside them in the row. Preferably I'm after a solution that works in both '03 and '07 but it's not a disaster if I can only do it in '07.

View 5 Replies View Related

Hiding Values In A Cell

Jan 10, 2010

I have 3 columns on my spreadsheet with 100 rows:

- each cell in the 3rd column has an equation in it as such:
=h4+f5-g5 which means that the current cell in column 3 is adding the value of the cell just above it + and - the values of the cells on the left to it. This works fine, the only problem is that even though nothing is entered in row 40 for example, there still is a value based on the last calculation in row 5 for example - this value shows all the way down to row 100. Anyways,

How can I hide those values in column 3 all the way down to row 100 if nothing is entered in the other 2 rows?

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved