- each cell in the 3rd column has an equation in it as such:
=h4+f5-g5 which means that the current cell in column 3 is adding the value of the cell just above it + and - the values of the cells on the left to it. This works fine, the only problem is that even though nothing is entered in row 40 for example, there still is a value based on the last calculation in row 5 for example - this value shows all the way down to row 100. Anyways,
How can I hide those values in column 3 all the way down to row 100 if nothing is entered in the other 2 rows?
the support this board has given me as I learn VBA. I have three columns - Q, R, and S. I only need to see columns R and S if the cell values don't equal those in column Q or each other. So if I have cell values like the ones listed in the example below, then I don't need to see columns R and S.
I am working on creating a spreadsheet that can be updated by those unfamiliar to excel. I have a master list on one sheet and three separate lists for business, individual, and general. Each list has three columns giving name, address and postal code. There are numerous repeats on these lists and I wanted to hide any duplicates while keeping my cells aligned. So far I have been able to highlight any duplicates, but was interested in some function that would save at least one duplicate while hiding any additional ones.
I'm trying to hide all but one duplicate value in a list; I have a report that can give multiple results for each record, but to make it cleaner to read I want to hide the duplicate values, such as customer names etc. after they have first appeared. I'm aware this may not be a very clear explanation so have attached an example spreadsheet.
The left-hand list is similar to what I would start with and the right-hand list is what I am looking to achieve. Conditional formatting will format duplicates but will obviously all to all and can't use the remove duplicates function as it will take away the unique values alongside them in the row. Preferably I'm after a solution that works in both '03 and '07 but it's not a disaster if I can only do it in '07.
I'm using the following code to hide rows with zero values in my workbook. I have 10 sheets for potential data/products and a "summary" sheet that is set up to pull all the information from the 10 sheets. I often don't use all 10 sheets so there are a lot of blank cells. I set up the code below to hide zero values to make the "summary" sheet easier to work with. I am encountering a problem with cells that are formatted as dates. a zero value/empty cell shows up as 1/0/1900 and is therefore not auto hidden.
Either any adjustment to my formatting or code to automatically hide these blank date cells on the "summary" sheet?
Code: Private Sub Worksheet_Change(ByVal Target As Range)Dim c As Range For Each c In Range("C3:C8778") If c.Value = "0" Then c.EntireRow.Hidden = True
I'm using the below macros to hide or unhide rows based off of a value in column A. Column A contains an If statement that looks for a value in column F, and depending on whether the corresponding cell in column F contains a value the if statement returns either True or NO-IF(F>0,True,"No).
It currently takes quite a bit of time to run this macro. Given the specs on this machine, I'm convinced that there is probably some loop or inefficiency in my code.
Sub Button1_Click() Dim cell As Range For Each cell In Range("a59:A1472")
What I need to do is hide the value in an individual cell, dependent on whether a value (any value) has been entered in another cell. I know this must be possible somewhere in conditional formatting but I can't seem to figure it out no matter how much I try!
The table below should hopefully explain exactly what I'm after. I want to hide the value in the balance column (automatically calculated)when no transaction has taken place (ie, there is no date entered in the date column). At the moment this value appears all the time.
I've tried several approaches on how to code this, but can't figure out how to work it. I have a large spreadsheet; which dynamically changes in both column and row counts. So, I have an array of values. If any cell has a negative value, that cell text needs to be changed to red AND that row needs to remain displayed. If ALL values in that row are >=0 then the row can be hidden.
The array is actually a pivot table named QTD
For Example: If cell D5 = 5 and F5 = -3 then Row 5 should remain displayed.
If Cell D6 = 5 and F6=0 then row 6 should be hidden because all values are > 0
Then I was thinking of using the case statement to hide the rows but can't figure the syntax. I'm open to any other means of performing the taks as long as the initial array dynamically to encompass all the data.
I am currently building a tool that works with an undefined range of input variables, e.g. I now have a range of 200 values but it could just as easily be 400 or 100. I am using these values for further calculations and have thus 'dragged down' to cells that in some instances are empty, resulting in values that are 0. I'm also building a chart based on these values, but it shows the values that are 0 as well!
Is there any way to just plot the non-zero values without changing the data range?
I have a sheet with cells that will vary and change in value. The far right column (in this case G) is calculating a percentage from cells in columns D and F. At the moment only 9 rows are being used but I have made provision for the list to extend down to row 100 for future use. Cells in columns D and F are receiving their values from sumif formulas on another sheet, therefore a lot of cells are showing a 0 value for the moment (which I have formatted to show blank).
My problem is that I have cells in column G (percent formula) which are of course showing #DIV/0! due to the fact that they are calculating cells with 0 value. How can I format the cells in column G to show blank until they receive a real calculation!
Does Excel have the ability to automatically hide rows without values in certain cells?
For example:
Sheet1
ABC1Route NumberTechnicianNumber of Units Cleaned25Tony237Don749 511Ray12613James16715Chuck21817
In this example, Rows 4 and 8 would automatically be hidden, leaving the other rows displaying. Of course, somehow I'd have to "Unhide" these rows at some point to add data if needed.
This is for a spreadsheet that is about 500 rows. Conceptually, I would automatically hide the rows w/o data in column B, analyze (or print) the worksheet, then "Unhide" the columns to enter data the next day.
I have an activeX combo-box that selects from different pieces of equipment that we supply. Based on that selection, I require ranges from the same page that the combo-box is on to either hide or unhide. Also, I require different tabs to become visible or hidden based on that same selection. So far so good - I have code that does this, and it appears to work without glitch.
Where the problem arises, is in one of the ranges that is unhidden when a particular piece of equipment is selected there is another combo-box that I would like to use (the number of said pieces of equipment to supply) to further hide/unhide additional ranges on the same page, and also hide/unhide certain tabs as well.
When I make a selection from combo-box 1, all works as planned, but when I change the state of combo-box 2, even with no associated coding referring to it, I cannot change combo-box 1 again without getting Error 1004 "Unable to get the Hidden property of the range class".
None of the sheets in the workbook are protected.
I would sincerely appreciate any help/code that could circumvent this error.
I've got the following formula in a column: =IF(C10/B10>=1,20,IF(ISERR(C10/B10),0,0)). The purpose is to ensure that only one of two values (20 or 0) is displayed, regardless of circumstances that regularly generate the # DIV/0 error. The if(iserr(...)) part works fine when tested on its own, but when nested, it's still allowing the error to display.
I'm trying to hide all columns which have the word "hide" in row 6. I have done a similar thing whereby I hide all rows which have the word "hide" in column 3 using the following
Sub HURows() BeginRow = 9 EndRow = 40 ChkCol = 3 For RowCnt = BeginRow To EndRow If Cells(RowCnt, ChkCol).Value = "hide" Then Cells(RowCnt, ChkCol).EntireRow.Hidden = True Else Cells(RowCnt, ChkCol).EntireRow.Hidden = False End If Next RowCnt End Sub
Alas changing the number and every Col for Row and vice versa doesn't work!! Really I only need to search colums G to U inclusive. The code must also unhide colums if the values in the cells of row 6 change to anything other than "hide".
I have created a spreadsheet from a master using vlookup. I want to be able to hide rows which contain a null value (NA) in column B (sample attached). Is there a formula I can use which won't interfere with the vlookup or do I need to hide the rows individually? I tried filtering but that only filtered the cell and not the whole row.
I'm trying to create a code that when run hides a selection of columns and defines the minimum and interval value for a chart on the active worksheet. My attempt is assigned to the 'update skills' button at the top of the "GRAPH" worksheet of the attached workbook.
how to hide formulas from cells without having to protect the sheet. When I tried to hide some formulas the end-user was unable to input numbers into the model because the whole sheet was protectedl.
I want to be able to hide a selection of cells, including the border formatting, when another cell has a particular value (in this case I want the cells visible only if the value in the cell is above 0). I've looked around and can't seem to find anything relevant.
I am trying to search the cells in Column A around rows 54 to 77. And if the cell says "Yes" it should hide the row. I think I'm on the right track, but can't seem to get it work.
I am trying to hide columns where the Value in the cells on row 9 is "", that cell being populated with a formula where the result is "". However I am getting the Compile Error Message 'Next without For'. Any clues?
Here is what I have so far (debugger highlights my CheckBoxLD.Visable arguments)
Yes, this is an activeX checkbox
Code:
Private Sub Workbook_SheetCalculate(ByVal Sh As Object) If Worksheets("Dosing").Range("BM21").Value = 0 Then CheckBoxLD.visable = False Else: CheckBoxLD.visable = True End If End Sub
I have numerous tabs in this file, but all of the tabs all summarize to the first tab called "Annual Record".
So after "Annual Record", tabs follow as "WO1", "WO2", etc...
On the tab called "WO1", I have cell AJ5, which can have 3 status selected (Data Validation List), which is either Inactive, Open, or Completed. If cell AJ5 on "WO1" says "Inactive", then I want a named range on "Annual Record" to be hidden. Right now I have the range named "WorkOrder1". This named range is essentially rows 4-7. So if it's easier to hide rows vs. a named range, then so be it. I also would like it to happen automatically (perhaps what you would refer to as a change event). When cell AJ5 is change to either "Open" or "Completed", then the rows would unhide. I'm thinking that this would be repeated for tab "WO2". If cell AJ5 says "Inactive", then rows 8-11 on the tab "Annual Record" or the named range "WorkOrder2" would be hidden. And again, if the cell AJ5 is change to anything other than "Inactive", then the rows or range would unhide.
I need to hide 8 rows (30-37) based on a value in cell B28.
If the value is 2 then only show rows 30 and 31 If the value is 3 then only show rows 30, 31 and 32 Then continue this up to the user puts in the value of 8 and no rows are hidden.
