Auto Population
Oct 22, 2009
Ok, so this is my first attempt at an excel macro. I'm trying to develop a macro that will assist me in auto-populating a column in a new worksheet based on another worksheet. Recently I ran a new report at work that is 4000 lines long that I really do not want to have to edit by hand, since I already had to do it with the older one.
I can't post my data but i'll try to explain it the best I can, but basically it's set up as a part number, next column is the steps in completing that part, and then a workcenter number. I'm trying to populate that workcenter column in the new worksheet. I've put this macro together with the best of my ability along with excel help and the internet but I just can't seem to get it to work.
View 14 Replies
ADVERTISEMENT
May 5, 2014
I would like to Know which formulas to use for the attached example.
I need to create a form that auto populates all other information to the right of the ref number.
So if I add a ref number i.e. 101 then the the adjacent three columns should take info from the second sheet.
and also how to copy the formula to other rows so that the info relates to each line and relevant ref number.
I can do dropdown for the ref number but need to know the rest!
View 1 Replies
View Related
Oct 23, 2009
I'll insert the code below. Basically I'm taking the sheet titled Old and based on part number then op number, automatically populating the new work center in the new sheet. It runs but seems to be caught in an infinte loop.
Sub DataPopulate()
Dim varOperNo As Variant
Dim varPartNumber As Variant
Dim x As Integer
Dim SFCTimesNew As Worksheet
Dim SFCTimesOld As Worksheet
Dim pnfind As Range
View 9 Replies
View Related
Jan 21, 2014
This is in Excel 2010
I have, what I believe a fairly complex request.
I have 3 fields that will be entered manually per row
Frequency in weeks = FQ Example FQ = 4 weeks
Duration in hours = DUR Example DUR = 3 hours
Start Date in Date Format = SD Example SD = 01/15/14
I have a series of columns starting at December 30, 2013. This represents the week of December 30th 2013.
It continues on until I hit the last week in December of 2015 which is 12/28/15
There are multiple rows with the 3 entries listed above (FQ, DUR & SD).
I need a function or macro that takes the Start Date (SD) for the specific row and finds it's location in the series of columns (for the example of 01/15/14, it would land on week 01/13/14). The program would enter the Duration (DUR) in that Column's Row (if that makes sense).
The program would then add the Frequency (FQ) to the Start Date (SD) and look for the next column (or Week) that it would fit in and once again enter the Duration (DUR) in that cell.
It would do this until it hits the 12/28/15 end date.
View 1 Replies
View Related
Jun 15, 2009
Excel has a QUARTILE function to divide a population into quartiles. I'm trying to do something similar but divide a population into deciles (i.e., every 10%). Is there any easy way to divide a large population into deciles and to assign a decile to each value in the population (i.e., top 10%, 11-20%, 21-30%, . . . bottom 10%)?
View 2 Replies
View Related
Jul 18, 2013
Trying to create a code to automate the population of a simple table of Job Grades against Business Units (BUs) with Job Titles.
The data source will kind of look like this:Job Title
Job Grades
BU
Sales Manager
A
1
[Code].....
View 9 Replies
View Related
May 5, 2014
I'm trying to make a sales chart defining the top 6 most popular items I'm having a problem.
Attachment 316136
View 1 Replies
View Related
Jul 13, 2007
See attached picture. This shows Profit and Growth for the stores in each region.
The percentage total is weighted based on the profit of each store in the region.
What I have is an excel sheet with hundreds of regions (going down), all with a different amount of stores. I need a way to populate each of its Region % Total with the weighted average formula (in my example, cells C8, C12, and C20) while also varying the formula to include only the stores in the region.
For example, C8 calculates the weighted average for %s in rows 2 through 7 (6 stores), but C12 calculates it for rows 9 through 11 (3 stores). I need the formula to vary based on the number of stores.
View 9 Replies
View Related
Nov 17, 2006
I want to calculate the standard deviation of a whole population in my database (total population: 36,458)
I used the STDEV equation however, I went into help and it says that the equation calculates STDEV based on a sample of 30.
I don't want to calculate a standard deviation based on a sample. I want a standard deviation based on the whole population. Is it still okay to use the equation?
The reason I want to calculate the standard deviation is so that I can use that number to calculate the sample size needed for my population so I can create a histogram.
View 6 Replies
View Related
Apr 16, 2009
How you do use excel to calculate a sample size using the population, error limit, confidence level and upper error limit rates?
View 9 Replies
View Related
Feb 28, 2014
I am trying to create a filterable To-Do List. My goal is to enter each item with a userform, which I have created and pops up upon clicking the "Insert" textbox. making the following macros happen:
1) I would like to insert the new item in a row at top of existing info, below the headers, with the populated information from the userform when you click the "Add" Commandbutton on the Userform.
2) I want to make sure any filtering is reset whenever a new item is entered so the list reverts to original appearance.
Attached File : To Do List.xlsm
View 2 Replies
View Related
Sep 26, 2013
I want to be able to create a log of incoming orders and requests with a column containing initials of the person who will be responsible for handling the item entered. From this sheet, I want to populate other worksheets in the workbook with the data base on the initials placed in the first column. Each initial set would have its own dedicated sheet in the workbook.
Is it possible to create and IF "ST" in column A of main log THEN copy all data to designated fields on the ST worksheet?
View 9 Replies
View Related
Jul 21, 2008
I currently written the following formula, but always have issues when adding additional depending on selection.
D8 is the selection ( Validation ) on PERF EXP FORM Tab, Once you enter the selection... you then go to the Accounts per hour Worksheet
=IF('Perf Exp Form'!$D$8="Test1 14-18 station",IF(('10220DBHE'!B9=A6),IF('10220DBHE'!C9 > 11000,11000,'10220DBHE'!C9),"N/A"),"N/A")
Perf Exp Form
Perf Exp Form *ABCDEFGHIJKLMNOPQ4 *1. GENERAL INFORMATION****************5Customer***Date / Name(s)*6ApplicationSheet Size1UP/2UPOrientationSOG/EOGFold TypeFold Plate# CH***78 1/2 x 142 UPPortraitSOGLetter/ZHeavy1***8Machine / model**Enduro 4-6 station9ConfigurationCHANNEL 1CHANNEL 2CHANNEL 310590-4720-4910 Dual DeckNONENONE11Date / Name(s)*** Excel tables to the web >> Excel Jeanie HTML 4 ......
View 9 Replies
View Related
Sep 14, 2005
The following are a few of generally accepted values: ...
View 8 Replies
View Related
Jul 14, 2012
I have created a population pyramid and want to add another chart on the secondary axis which I can do. The part which I seem not to be able to complete is getting the line chart secondary axis to read from the primary y axis. It seems to add a new axis, even when I delete this the line chart does not read correctly.
View 1 Replies
View Related
Apr 30, 2014
I am an undergraduate biology major working on a geometric morphometrics project. It is focusing on wing asymmetry, so I have data for the left and the right wings for a sample population of 30 individuals. The data from the software is exported as a spreadsheet with two rows of data for each individual, since each wing was calculated separately, and my mentor has asked me to average the data for subsequent analyses in another program.
I'd like to do this easily with an Excel formula, but when I try to do the averages I'm having a little trouble getting the formula to carry on correctly. I need it to average, say, E2:E3 then the next cell average E4:E5, but instead the only thing I can get it to do is average E2:E3 then the next cell do E3:E4. Which obviously doesn't work for me, since E3:E4 is data from two different individuals.
Is there a way I can do this for my data? One of my spreadsheets is a 60x32 matrix of landmark coordinates, so I'd really rather not try to do all the cells individually.
View 1 Replies
View Related
May 14, 2014
Basically, what I'm dealing with is an inventory system. When a cell value reaches below a certain quantity, we have a cell light up with the word "YES" (under the "re-order" column). What I'd like to do is have a macro that checks to see if that cell is populated with "YES" and if it is, to run another macro (which I already have written) that sends out an email notifying us of the need to re-order.
How it would work: The person pulling out the inventory would fill out this form and click "Submit"
submitbutton.jpg
I would then have a "call" code tied to the "Submit" button that when clicked, would run the macro to check cell population and send out the email. The email code is already written and works flawlessly on it's own. I just cant seem to figure out how to write a macro that checks for cell value and then runs it (or not) based on that.
View 14 Replies
View Related
May 27, 2014
I have the following code:
[Code] ....
When I run the macro, some columns are already hidden. The macro doesn't seem to autosize cells correctly. For instance, one cell in a row appears to have some contents hidden (or below the reading area of the cell). In other instances, the rows are auto-size to huge heights and widths.
View 7 Replies
View Related
Jul 29, 2014
I need the tabs of a project action log to auto-populate and auto-delete in a master log. (So when something is added or deleted in a tab it is added or deleted on the master) I use excel a little bit for work and personal finance purposes but I have zero experience with macros or VBA.
View 1 Replies
View Related
Jun 19, 2009
Making a mission tracker that requires less upkeep than my units previous methods. I am using Excel 2007 and have some things in mind that I would like it to do.
On the down side, I have only basic experience with excel and have never used macros or VBA.
Even if what I am after could be solved with functions (which I prefer), I simply do not quite know how to make what I want without assistance. Ok, now on to the description.
The mission tracker aside from showing a list of the missions we have done during our program, it needs to also generate metrics automatically. In my worksheet, I am using columns A-G and rows 1-501.
The mission scheduling type in Column E are listed below. The letters on the left are what I am using in the sheet, the part to the right is what it really means:
Column D has the day of the week listed as: Mon, Tues, Wed, Thurs, Fri, Sat, Sun.
now the metrics I need to be generated are the number of different types of each mission compared, how many of each type of mission was flown per day of the week, how many of each type of mission was flown per month.
Basically what I need is a way to automatically count the number of rows that meet a specific criteria throughout the range. This would require being able to check the value/text of multiple cells at a time and count the number of rows that meet that criteria.
[SOLVED] 1. The first part would be to have the worksheet be able to count the number of each type of the 9 mission scheduling codes throughout the range. I would be storing the count in new cells that would then be connected to pie charts.
[SOLVED] 2. The second part would be to count the number of each type of mission that was flown per day of the week. That would require searching both mission type and day of the week. All I would need is a working formula for 1 set, then I could switch mission codes and weekdays to match all the 63 possible outcomes.
3. Knowing the number of each type of mission flown per month. This would be checking the date and the mission type. The trickier part that comes up in my mind is that our programs span multiple calendar years, so it would have to track it by month and year, that way there is a difference between Jan 2009 and Jan 2010. The counted numbers would be used to make histograms. It would be nice if the chart titles could be automatic based on the dates inputed in the mission tracker. If I needed to choose a maximum time length for it to cover, I would pick 3 years.
4. I would like to figure out how to make an inputted line of data on the main tracker sheet to create a copy in the corresponding worksheets based on schedule type, that way a person could look at/print a specific type without having to sort the main list.
The actual goal is to make it where a person can enter the 1 line of data per mission (cells A-G) and the mission metrics update automatically after each mission is inputed allowing upper level supervision to have current information quickly whenever it is needed. Currently we need about a weeks lead time to get the information asked for on our current progress.
View 10 Replies
View Related
Jan 7, 2008
Within a data validation selection, are you able to do both Auto Complete and Auto Delete? I have this posted at another forum [url]but have not been able to find a solution (a copy of the file, test. zip is there as well). I am not sure it is possible, or, at least I have been unable to get it working. I can do each, but not both.
I have also been utilizing:
[url]
[url]
View 5 Replies
View Related
Jun 27, 2014
I have one worksheet that contains a large table. I'm using VLOOKUP to spread each row of the table to separate worksheets.
When VLOOKUP refers to an empty cell, is there a way to set that row to be hidden?
Also, if VLOOKUP returns data to a cell, is there a way for Excel to automatically set the row height to display all of the linked data in that cell?
View 13 Replies
View Related
Jun 27, 2014
I have one worksheet that contains a large table. I'm using VLOOKUP to spread each row of the table to separate worksheets.
When VLOOKUP refers to an empty cell, is there a way to set that row to be hidden?
Also, if VLOOKUP returns data to a cell, is there a way for Excel to automatically set the row height to display all of the linked data in that cell? There is only one column of data.
View 1 Replies
View Related
Mar 11, 2014
Possible to auto count and auto sum based on Unique ID.
Download link to the file in question [URL] ..........
So for Example ID 79125 should get a sum 537.39 and count should be 12, also in any given week like 50 , 51 , 52 , week 1 etc.., duplicate entries must be all counted as 1
View 8 Replies
View Related
Jul 31, 2013
I am trying to auto generate a calendar based on two drop down menus - Month and Year.
Once the month and year is selected I want to import all work orders onto the calendar based first on the "Labor Name" found in the list of work tab, then assign each work order for that labor name to the respective date on the calendar for the month.
August PM Schedule Demo.xlsx
View 2 Replies
View Related
Jan 10, 2012
I have dates values in 3 columns.
A1 - Header - "Holidays in XXXX'
B1 - Header - "Holidays in YYYY'
C1 - Header - "Leaves by YOU"
A2:B11 have static dates consisting of 10 dates in each column.
C2:C11 - the user may enter any date at any point of time.
I would like to auto-merge the dates in all the 3 columns (A2:C11) in a single column say D2:D31 and then the system should auto-sort the column based on dates in any one order. So as soon as the user enters a value in say cell C2, all the 10+10+1 dates should get sorted.
Also the constraint here is a user may not apply all 10 leaves at in a year. So many of the cells may have blank values.
View 1 Replies
View Related
Dec 26, 2007
I would like to know if there is a way to Auto number a text.
I have a column with text tags (lets say Column B). These cells look at a specific cell (ex. A1) and see what text is written in it then copy the text into their own cells B1, B2, B3 and so on. So if cell A1 reports AAA then Column B cells become AAA all the way down.
Now what I like to do is for column B cells look at A1, copy the text and add _01 infront of their copied text. so for Column B, B1 reports AAA_01, B2 is AAA_02, B3 is AAA_03 and so on
View 9 Replies
View Related
Dec 1, 2008
I run an online store where all the product details are handled by a .CSV file and naturally all the information has to be exact or it won't work at all especially UPC codes and product codes. However whenever I open the .CSV file to edit anything it auto formats several bit of information including several UPCs and product codes that begin with one or more 0's. This among many other problem I have had are all caused by excel's auto formating "tool" and I find it of absolutely no use. Is there any way at all to disable this "tool" so it will stop messing with my data every time I need to make a product change? (I have tried using the '0 trick but when I save the file and open it again later all the '0s are gone again)
I am running Excel 2007 on Windows Vista SP1
View 7 Replies
View Related
Jan 19, 2009
this will not be easy since I do not know any English terms for Excel operations (only Swedish ones...). But I'll give it a try:
I have a column A, and a column B. I want the numbers in B always to be
=(cell above)+(cell to the left).
Example:
B1=1, A2=1 --> B2=2
B2=2, A3=7 --> B3=9
B3=9, A3=5 --> B4=14
and so on.
Column A is a column for my expenses, column B is my cashbox, you see...
I could do this with a simple "sum"-formula in every B-cell, but I hope there's a solution to tell the spreadsheet that any B cell=(cell above)+(cell to the left).
View 13 Replies
View Related
Feb 1, 2009
There are only 3 columns, A, B, C and only 10 rows but I would like it to sort automaticaly. I enter data on other sheets and it is loaded automaticaly back to sheet 1 after some calculations are made. I would like the data on sheet 1 to sort automaticaly on column C keeping the rows of data intact.
View 14 Replies
View Related
