I currently have a worksheet that, using a Form Button, generates a new worksheet that formats column widths, titles and also creates a file list of all files on my hard-drive along with date created and the full file path.
Each file has all of its information in one row.
From the original button that initiates the whole process I need the code to create a delete button for each file in the list using, I presume, the kill function.
The delete button would need to sit in column 'L' starting in cell '5' and autofill down. The kill function would pull the file path of the file to kill from the full file path displayed in column 'K', again starting in cell '5'.
I already have the code to genereate the file information (path, date created etc). I literally just need the code for the creating the multiple form buttons and assigning the macro to each button.
I am working on automating our truck payment system. When the macro copies the data over to the output printout sheet, it will only copy the information once, even though there are 15 lines that it should be copied to. When I originally recorded the macro, I used the auto fill option to fill the information for all 15 lines. However, when I run the macro the auto fill doesn't work for me.
The following code works fine for what I want to do. I want to have a range a5:g5 copied and pasted on down to g200 - as you would do if you selected and draged the selection box on down to paste it. The problem is I want to avoid the ".select".
I want to do is set up a macro to autofill into a new column every month. My data is linked to another excel document so that is where it is pulling the data from. Currently I have data in columns monthly from Dec 2001 until June 2008. I just want a macro that will automatically add in the next month, so in this case July then August the following month ect.
1. Autofill dates from the Start Date ("D5") for x amount of years. Autofill begins in Range("C10") 2. Point out the THIRD 'wednesday' of every month with a "1" in column D. 3. Point out the second last 'weekday' of every month with a "1"in column E.
I have searched the forum a few times and haven't seen an exact example of what I am trying to do, so I hope this isn't a duplicate.
I am looking for a macro to copy a cell and autofill it down the column until it gets to a non-blank cell. When it reaches that cell it needs to then copy THAT cell down until it reaches another non-blank cell... this could happen just a couple times, a couple dozen times, or only the very first time.
So for example:
In cell B2 there is text "Data1" In cell B13 there is text "Data2" In cell B25 there is text "Data3"
I would like the macro to search column B to find "Data1", and then copy it down the column until it reaches B13, then copy "Data2" down until B25, where it would then copy "Data3" down until the end of the document. The location of the data in column B varies, and the number of cells with data in column B will vary as well.
I need a macro that can autofill irrespective of where the source cells are. Like, this is what I want to do:
Select two cells containing a descending order such as 50, 40. Hit the hotkey and the macro should autofill the same way as double clicking the bottom right corner of the selection.
The problem is that the two source cells can be anywhere in the sheet, and autofill range isn't fixed. Essentially, I just want a keyboard shortcut for Excel's own Autofill function.
I want this macro to be rid of the mouse when I'm working on excel (it really slows me down to use the mouse every time I want to autofill).
Trying to write a macro so that my summary worksheet will auto populate when new sheets are added and filled out. I want the PO#, Quanity, Date ordered, Vendor, Subtotal, Tax and Total all to transfer from worksheets like F001 to the summary sheet. Yes there is only one F001 sheet filled out but that number will rise into the hundreds as the project progresses. No idea where to begin when writing this macro.
I am putting together a macro to import a CSV file onto excel. I will be manipulating columns of data (concatinating some, dividing by 100 etc.)
What I am having trouble with is that each file imported will have different number of rows. I tried, in recording a macro, to use autofill (entered formula and double-click fill handle to drop the fourmula into each cell) hoping this would show me how to do it but alas, it just coded the range as the starting and stopping cells (didn't show a count formula or some such.
I'll do what I can to explain this mess I want to clear up...I have a series of excel reports I have to download and work thru daily and I need to see if there is a code to autofill down thru a column, based on multiple statements throughout the column..here goes:
Regardless of the actual f cell, I always will need to fill the Blank ** cell w/ the values from the previous cell....Hope this makes sense...& thanks in advance.... have_a_cup@cox.net
1. I need a macro to find a unique number, say a 10 digit number starting with 4100.. and move it 1 row down and 3 rows to the left. It needs to look only in one column (E) for this number. This row contains several unique numbers, variable number of blank cells between them, all having 10 digits and starting with 4100.. - So the macro needs to repeat this for every unique number.
2)Once it does this, I need it to autofill the unique number in all the cells in column A until the next unique number is reached.
I am trying to get a function (sum) of several cells to be automated in a monthly spreadsheet. I can get the function to work, but how do I get it to Autofil? The syntex seems to call for a range, which will be different every month. I can't figure out how to loop it, so I thought autofill would work.
I have an Excel file for work that has the following:
Column 1 is Agent Column 2 is Interval (in 15 minute intervals from a report that I pulled) Column 3 is Agent Calls (has a number anywhere from 1 - the highest currently is 19, which tells me how many calls that Agent had on that 15 minute interval.)
What I have currently is that if it says:
John Doe 15:00 5
It will automatically insert rows after the number based on a # -1, so it will add 4 empty rows after this row.
I have another step that will automatically copy Column 1 and Column 2 to the blank rows directly beneath them until it reaches a cell with data.
Now, what I need is a macro that will take Column C and where it says 5 automatically know to change that to '5a' then proceed to go down the list with 5b, 5c, 5d, & 5e. If it sees 4 it will know to change that to '4a' then proceed to go down the list with 4b, 4c, & 4d. I currently have numbers ranging from 2 - 19.
I have built custom list with this information so if I change all the numbers from 4 to 4a or 19 to 19a and double click on the black box it will autofill exactly like I want but it only goes down to the next cell with data, and I have 100+ lines per agent, and up to 21 agents a day, so this gets time consuming.
Here's how it looks when I'm ready to start the macro:
Each sheet has the same basic formatting. A1 contains a name. B1, C1, D1 are column headers. B2:B is data. C2:C is data and always stops at the same row B2:B range does. The only differences between the sheets is that they might not stop at the same row. I want a macro that merges A1 vertically as shown in my spread sheet to the end of column B and C. I want a border around the merged data, as well as around the B data and the C data individually.
Currently my Macro should: Turn off any filtersNumber column A from 1 to 1000 (starting in A14)Drags formula from K14-O14 down to last row of data shown in column Athen puts cursor in last empty cell in column B ready for user to enter data
On point 3 - I want the range to be K14-O14 if active worksheet equals "EXCHANGES" but if its on the "VALUATIONS" tab the autofill range should be L14-P14
I have found bits and pieces of macros on the internet and put them together so if my macro below is not the most effective for my needs but here it is in it's current state:
Here is my macro:
Sub AddNewEntry() 'TURNS OFF FILTER IF FINDS ONE ON Dim wks As Worksheet
I am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.
The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?
I am trying to simplify my data entry and I have this idea that I do not know how to tackle, but it would be nice to have it worked out. I am looking for an autofill macro that will fill column B2 to Bxx with values from 1 to max value specified in cell B1. Lets say I know I have 5 trees I need to enter. I want to enter "5" in a cell as a reference, and everything else will be filled in automatically with press of the button.
To make things even more productive I would like to use value from cell A2 and replicate it through the range specified above in column A2:Axx.
I have this ActiveCell.Offset(0, -1).Range("A1").Select. Selection.AutoFill Destination:=ActiveCell.Range("A1:A6"). However I need to copy the value down, so it is identical to the Range("A1"). At the moment it adds one year to each value when copied down. e.g. A1 = 12.01.09. and it copies it down so I get 12.01.10, 12.01.11 etc... I want them all to be 12.01.09
I am looking for a way for my macro to select cells C4:T4 and then auto fill the formulas down to the last row with data. I have found suggestions when working with one cell to auto fill, but cant seem to find a way to do it with a range of cells
I have a Macro and I need to code it to Autofill a formula in column B with data from A and I need to set it to AutoFill to the last row. Probably basic but I've tried a couple posts previously and I am just not getting it. This is what I currently have. Sorry, I recorded it and have some additional steps in here I don't need.
I have a piece of code that includes the following line:
Selection.AutoFill Destination:=Range("B1:B9414")
I want it to always autofill to the last row that has content in it. I have been changing the value to a large number that I know is always more than the content of the worksheet which changes periodically, but I would rather it always only go to the last row that is not empty so I don't have to go back and delete those extra rows.
I have a spreadsheet with data where the number of rows change daily, in column D. I have formula in column E which I autofill manually by double clicking on the cross thingy of the first cell. However I'm trying to do it using VBA, but it always stops at a certain row and not where the column D data stops.
Below is the macro which stops autofilling at row E7762
Selection.AutoFill Destination:=Range("E3:E7762")
Is there a way to amend the VBA to autofill based where Column D data stops?
I have a piece of code that includes the following line:
Selection.AutoFill Destination:=Range("B1:B9414")
I want it to always autofill to the last row that has content in it. I have been changing the value to a large number that I know is always more than the content of the worksheet which changes periodically, but I would rather it always only go to the last row that is not empty so I don't have to go back and delete those extra rows.
I need to write a code that will autofill down column A until the next value is reached and will continue to fill down using the new value. This will continue until the last row in column B. I have attached a small sample file for clarification.
