I want to do is set up a macro to autofill into a new column every month. My data is linked to another excel document so that is where it is pulling the data from. Currently I have data in columns monthly from Dec 2001 until June 2008. I just want a macro that will automatically add in the next month, so in this case July then August the following month ect.
View 10 RepliesI am trying to get a function (sum) of several cells to be automated in a monthly spreadsheet. I can get the function to work, but how do I get it to Autofil? The syntex seems to call for a range, which will be different every month. I can't figure out how to loop it, so I thought autofill would work.
View 3 Replies View RelatedI have a table of yearly totals for the amount spent by x. I also have a growth rate for each month so for example in 2001 in jan the growth rate might have been 0.3% and feb 0.5% What I want to do is for each month based on the growth rate and the total produce a value for each month which sum to the total amount. It's also important to note that it restarts each year.
Link for excel file is here: [URL] ...........
I’m currently pulling data into two columns labeled “Monthly” & “Non-Monthly” respectively. They indicate work orders with a frequency of “Monthly” or “Non-Monthly”
The Monthly data is obtained using the following formula:....
I have the following situation. I work off-site most of the time in another office. I would like to have a macro on my main office PC to run on a monthly basis at a set time.
For instance on the 15th of every month at 9:00 am the macro would go into a shared drive and pull an updated copy of a report, redo the report and send it out to various offices. I have VB code that performs all the tasks except for setting a timer to tell it too run on the 15th of every month at 9:00 am.
I have this macro that I am using but want to automate the file it uses. This file has the last 5 text/digits change each month, e.g.
Internet_GB_Report_Feb07
Internet_GB_Report_Mar07
Clearly the next file would be Apr07. I would like the macro to identify this automatically and use the correct file without having to go into the macro every month and change the last 5 text/digits. If you have any ideas I would be very grateful to hear from you. The Macro is below:
[/code]strPath = "c:Internet"
strFilename = "INTERNET_GB_FEB07"
strThisWkb = ActiveWorkbook.Name
intReports = Workbooks(strThisWkb).Sheets("Lookups").Cells(1, 2)
Code:
I am working on automating our truck payment system. When the macro copies the data over to the output printout sheet, it will only copy the information once, even though there are 15 lines that it should be copied to. When I originally recorded the macro, I used the auto fill option to fill the information for all 15 lines. However, when I run the macro the auto fill doesn't work for me.
View 8 Replies View RelatedI currently have a worksheet that, using a Form Button, generates a new worksheet that formats column widths, titles and also creates a file list of all files on my hard-drive along with date created and the full file path.
Each file has all of its information in one row.
From the original button that initiates the whole process I need the code to create a delete button for each file in the list using, I presume, the kill function.
The delete button would need to sit in column 'L' starting in cell '5' and autofill down. The kill function would pull the file path of the file to kill from the full file path displayed in column 'K', again starting in cell '5'.
I already have the code to genereate the file information (path, date created etc). I literally just need the code for the creating the multiple form buttons and assigning the macro to each button.
code?
View 9 Replies View RelatedThe following code works fine for what I want to do. I want to have a range a5:g5 copied and pasted on down to g200 - as you would do if you selected and draged the selection box on down to paste it. The problem is I want to avoid the ".select".
What solution whould I use?
Worksheets("GTopLists").Range("A5:G5").Select
Selection.AutoFill Destination:=Range("A5:G200"), Type:=xlFillDefault
i have a workbook that is doing a copy and paste between 2 workbooks.
the trouble i am having is every month workbook a changes to be the name of the current month and year workbook b never changes. so when a change in month happens the macro stops working due to new workbook name.
how could i have the macro reed the name of the work book and input that name into the necessary locations withing the macro.
Problem: The following code autofills columns O:P beyond the last row of data in column H.
Range("O3:P3").AutoFill Destination:=Range("O3:P3" & Range("H" & Rows.Count).End(xlUp).Row)
I have recorded a macro and it is working fine
My query is while the macro is running a column is inserted and numbers are autofilled
I need with the below statement. I need the statement to autofill columns b6:y6 down as long as there is data in column A6 down.
I am hitting a wall here
Sub Macro3()
'
' Macro3 Macro
' Macro recorded 10/14/2011 by Oasis Group
'
' Keyboard Shortcut: Ctrl+Shift+B
'
Range("B6:Y6").Select
Selection.Copy
Application.CutCopyMode = False
Selection.AutoFill Destination:=Range("B6:Y" & Lastrow)
Range("B6:Y" & Lastrow).Select
End Sub
I am trying to create a macro to insert monthly P&L figures into a spreadsheet.
I am needing the macro to insert a column to the left of a column titled 'movement' each month and copy&paste my monthly figures in.
I have recorded the below macro but my inserted column is always moving into column E and pushing the prior month to the right, where I need it to always be situated to the immediate left of the movement column, e.g. if the macro is inserting September P&L data I need it to be situated between August data (currently in column E and movement data currently in row F and so on.
Column C D E FItem
July
August
Movement
Fees
26,500
28,000
2,000
Assets Ongoing
150,000
160,000
10,000
Columns("E:E").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
Sheets("P&L Current Month").Select
Range("D11:D127").Select
[Code] ...
The macro should...
1. Autofill dates from the Start Date ("D5") for x amount of years. Autofill begins in Range("C10")
2. Point out the THIRD 'wednesday' of every month with a "1" in column D.
3. Point out the second last 'weekday' of every month with a "1"in column E.
I have searched the forum a few times and haven't seen an exact example of what I am trying to do, so I hope this isn't a duplicate.
I am looking for a macro to copy a cell and autofill it down the column until it gets to a non-blank cell. When it reaches that cell it needs to then copy THAT cell down until it reaches another non-blank cell... this could happen just a couple times, a couple dozen times, or only the very first time.
So for example:
In cell B2 there is text "Data1"
In cell B13 there is text "Data2"
In cell B25 there is text "Data3"
I would like the macro to search column B to find "Data1", and then copy it down the column until it reaches B13, then copy "Data2" down until B25, where it would then copy "Data3" down until the end of the document. The location of the data in column B varies, and the number of cells with data in column B will vary as well.
In a macro - how can you copy a cell and keep a data range absolute?
In the statement below, the range denoted by: DATA!RC[-52]:R[829]C[-52] is D2:D829. When I use the macro to Autofill using the following:
(Selection.AutoFill Destination:=Range("BG2:BG220"), Type:=xlFillDefault)
the range progresses. I need to have the range as an absolute.
Sheets("Report").Select
Range("BG2").Select
Selection.FormulaArray = _
"=SUM((DATA!RC[-52]:R[829]C[-52]=""APPOINTMENT"")*(DATA!RC[-55]:R[829]C[-55]>=Report!RC[-1])*(DATA!RC[-55]:R[829]C[-55]
I need a macro that can autofill irrespective of where the source cells are. Like, this is what I want to do:
Select two cells containing a descending order such as 50, 40. Hit the hotkey and the macro should autofill the same way as double clicking the bottom right corner of the selection.
The problem is that the two source cells can be anywhere in the sheet, and autofill range isn't fixed. Essentially, I just want a keyboard shortcut for Excel's own Autofill function.
I want this macro to be rid of the mouse when I'm working on excel (it really slows me down to use the mouse every time I want to autofill).
Trying to write a macro so that my summary worksheet will auto populate when new sheets are added and filled out. I want the PO#, Quanity, Date ordered, Vendor, Subtotal, Tax and Total all to transfer from worksheets like F001 to the summary sheet. Yes there is only one F001 sheet filled out but that number will rise into the hundreds as the project progresses. No idea where to begin when writing this macro.
View 1 Replies View RelatedI am putting together a macro to import a CSV file onto excel. I will be manipulating columns of data (concatinating some, dividing by 100 etc.)
What I am having trouble with is that each file imported will have different number of rows.
I tried, in recording a macro, to use autofill (entered formula and double-click fill handle to drop the fourmula into each cell) hoping this would show me how to do it but alas, it just coded the range as the starting and stopping cells (didn't show a count formula or some such.
I'll do what I can to explain this mess I want to clear up...I have a series of excel reports I have to download and work thru daily and I need to see if there is a code to autofill down thru a column, based on multiple statements throughout the column..here goes:
f1 msp
f2 msp
f3 blank **
f4 mct
f5 mct
f6 mct
f7 blank **
f8 cci
f9 blank **
Regardless of the actual f cell, I always will need to fill the Blank ** cell w/ the values from the previous cell....Hope this makes sense...& thanks in advance....
have_a_cup@cox.net
I recorded one for an autofill series which basically came out as
View 4 Replies View Related1. I need a macro to find a unique number, say a 10 digit number starting with 4100.. and move it 1 row down and 3 rows to the left. It needs to look only in one column (E) for this number. This row contains several unique numbers, variable number of blank cells between them, all having 10 digits and starting with 4100.. - So the macro needs to repeat this for every unique number.
2)Once it does this, I need it to autofill the unique number in all the cells in column A until the next unique number is reached.
I have an Excel file for work that has the following:
Column 1 is Agent
Column 2 is Interval (in 15 minute intervals from a report that I pulled)
Column 3 is Agent Calls (has a number anywhere from 1 - the highest currently is 19, which tells me how many calls that Agent had on that 15 minute interval.)
What I have currently is that if it says:
John Doe 15:00 5
It will automatically insert rows after the number based on a # -1, so it will add 4 empty rows after this row.
I have another step that will automatically copy Column 1 and Column 2 to the blank rows directly beneath them until it reaches a cell with data.
Now, what I need is a macro that will take Column C and where it says 5 automatically know to change that to '5a' then proceed to go down the list with 5b, 5c, 5d, & 5e. If it sees 4 it will know to change that to '4a' then proceed to go down the list with 4b, 4c, & 4d. I currently have numbers ranging from 2 - 19.
I have built custom list with this information so if I change all the numbers from 4 to 4a or 19 to 19a and double click on the black box it will autofill exactly like I want but it only goes down to the next cell with data, and I have 100+ lines per agent, and up to 21 agents a day, so this gets time consuming.
Here's how it looks when I'm ready to start the macro:
JohnDoe - Doe, John15:00 x
JohnDoe - Doe, John15:15 4a
JohnDoe - Doe, John15:15
JohnDoe - Doe, John15:15
JohnDoe - Doe, John15:15
JohnDoe - Doe, John15:45 4a
[Code] ......
And I need it to look like this:
JohnDoe - Doe, John15:00 x
JohnDoe - Doe, John15:15 4a
JohnDoe - Doe, John15:15 4b
JohnDoe - Doe, John15:15 4c
JohnDoe - Doe, John15:15 4d
[Code] ........
Each sheet has the same basic formatting. A1 contains a name. B1, C1, D1 are column headers. B2:B is data. C2:C is data and always stops at the same row B2:B range does. The only differences between the sheets is that they might not stop at the same row. I want a macro that merges A1 vertically as shown in my spread sheet to the end of column B and C. I want a border around the merged data, as well as around the B data and the C data individually.
View 3 Replies View RelatedCurrently my Macro should: Turn off any filtersNumber column A from 1 to 1000 (starting in A14)Drags formula from K14-O14 down to last row of data shown in column Athen puts cursor in last empty cell in column B ready for user to enter data
On point 3 - I want the range to be K14-O14 if active worksheet equals "EXCHANGES" but if its on the "VALUATIONS" tab the autofill range should be L14-P14
I have found bits and pieces of macros on the internet and put them together so if my macro below is not the most effective for my needs but here it is in it's current state:
Here is my macro:
Sub AddNewEntry()
'TURNS OFF FILTER IF FINDS ONE ON
Dim wks As Worksheet
[Code]....
I am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.
The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?
I have a two column A and B at Sheet1. Col A is a Date wise column and Col B is of the Values. I need formula for getting sum monthwise in sheet2. i.e the sum of jan, feb, mar etc
View 9 Replies View RelatedI wish to create a Vlookup & summing qty by month.
In sheet1 is date
Column A = Date
Column B = Code
Column C = Qty
In Sheet2 I wish to create Vlookup.
I have the code in Column A4 going down AND wish to create Vlookup in column C4 for month Apr-09(c3) display total qty.
In sort look up code - for the month and sum qty .
code Apr-09 May-09 Jun-09 etc
SW L 60 15 55
SW M 10 35 45
DD L 30 30 25.