In file named (Book 1) I have a lots of tabs named e.g. pd1 pd2 pd3 etc.
In another file (Book 2) I need to link cell A1 (on Sheet 1) to cell A1 on pd1 (in Book1)
Which I can do fine.
In Book 1 I want to autofill the formula i have that refers to A1 on Pd1 but when I drag it I want the formula to go up in a series to refer to Pd2, Pd3.
So the final formula looks at $A$1 on Pd1 then on Pd2 Pd3.
I need help with a macro for copying and pasting of cells. I believe this should not be a problem for the Excel VBA experts, but for someone who can only record macro, I'm really at a loss.
Attached is a sample file, where sheet 'Source' is an example of the sheet from which data are to be copied. The other sheet, sheet 'Final' is an example of the final format that I need. The reason I'm doing this is I'm planning to upload my data into Access and so I need to convert them into a list format.
List of target columns in sheet 'Final' and source cells in sheet 'Source':
Column A: Biz ID - not sure if I really need this, by right it should be listed automatically once I paste the data
Column B: B2 of 'Source'
Column C: B2 of 'Source'
Column D: B1 of 'Source'
Column E: row 6, relevant column
column F: column K
column G: row 5, relevant column
column H: the specific amount
So basically I'm creating an entry for every amount in the table.
I have the following simplified example:
Table with three columns with a growing number of rows. The user enters data into each row, once user enters the last value and hits "Enter" on the final cell (column c) I want a script to evaluate the row and copy the entire contents of the row onto an existing different worksheet. The first column (A) contains the attribute that will be the condition that determines which sheet to paste in
For example, in my attached file, the first row contains the value "Square".
I want that row be copied and pasted into the 2nd tab of the worksheet (reserved for "Square" data) on the next free line. Simiarly, Triangles should be pasted on the thrid tab. Note however that i think the data should be copied line-by-line as the user enters it, which obviously isnt the case for the example dummy data, its just there to simulate my setup
is it possible to copy various cells from one worksheet to another. I have a cover sheet holding various jobs for different individuals, data validation has been used to set up various drop downs for the peoples name etc. On selection of an individuals name i was wondering could various cells on that row be copied into a seperate worksheet with that individuals name being the tab name? I have tried using the " Lookup" function but im not getting too far.
View 8 Replies View RelatedI have 2 sheets in a workbook where i would like cell G8 on sheet 1 to equal the value on A11 sheet 2 & G9 to equal A12 and so on down the sheet. The problem is that G8 are 3 merged cell so every time I try to use autofill the reference number jumps by 3. The formula in cell G8 is
View 3 Replies View RelatedI have a spreadsheet which has a source worksheet, containing 2 columns with thousands of client numbers and account numbers. I have a destination worksheet which contains certain account numbers which are featured in the source sheet.
What I need to do is pull the matching client numbers across from the source sheet into the destination sheet. An example is attached.
http://www.excelforum.com/excel-programming/651452-copy-rows-of-data-into-a-different-format.html
Here is the problem:
I have a list of activities (each activity is one row of data). These will be input manually into Sheet2. (see attached file)
The activities then need to be automatically copied and pasted into Sheet1. However, the data is displayed in a different order than in sheet1. So I need some code which will run through a loop for each row of data and then copy and paste it into sheet1 until it reaches an empty row.
The cell positioning of each data set in sheet1 is equally spaced. VLOOKUP will not work for me here as I do not want any formulae or VBA script in sheet1. I cannot change the format of sheet1 as it is a company form.
I'm trying to "export" data from a static ws "order" (Sheet2) to a selected (active) worksheet. This will happen with 15 different (random) cells.
I got this far but the copying isn't happening from the correct sheet or going to the active sheet. The data in "G5" on "order" should go to the first unused row on the active sheet. What I got was backwards.
Once I get the first one to work I can finish the code for the other 14 cells. I appreciate getting pointed in the right direction
I have a worksheet that gets autofiltered by the user. I need take the unhidden data and copy it to a new worksheet.
Range("H18").Select
Dim sh As Worksheet
Dim Cell As Range
Dim Txt As String
For Each Cell In Sheets("Panel Check List").Range("H18:H5000")
If Cell.EntireRow.Offset(1, 0).Hidden = False Then
Cell.Copy
Sheets("Query Results").Range("A6").Select
If IsEmpty(ActiveCell.Offset(1, 0)) = True Then
ActiveCell.Offset(1, 0).PasteSpecial
End If
End If
Next Cell
I have created one-dimensional array and now I try to copy the data from array to some specific Cells in worksheet. But it seems impossible all the time!
Sheet2.Cells(56, 3 + m) = LossLocationInt(m)
NB: LossLocationInt(m) is an array containing value in it. But, this doesn't copy to the Sheet2.Cells(56,3+m). For clearness: the array has type variant
I am using Windows 7, with Excel 2010.
I have one Worksheet Short Course - PB's Which contains all swimmer information and searches through all previous swims and reports back the swimmers current Personal best times (PB)
I am creating a work sheet to calculate percentage increases over a set date period. I have managed the calculations but can not get the autofill to function as I was hoping.
In my short course sheet 1 Row = a Swimmer and there details
In my new sheet, I have 3 rows for the same swimmer
Row 1= Swimmer and PB's before a set date
Row 2 = Swimmer and PB's After set date and upto Todays date
Row 3 = Percentage calculation of difference between the two rows to enable track performance increase
I have all of this working and in place and want to copy the formula's down now to cover all swimmers in the club.
When I copy the 3 lines down, Autofill adds 3 to the row reference for the first line and I just want it to add 1.
ROW3) =IF('Short Course - PB''S'!A3="","",'Short Course - PB''S'!A3)
ROW4) =A3
ROW5) = A3
[Code].....
I am trying to autofill cells across a column that sum a range but move over 5 columns from another worksheet. for example, i want to take this range:
Schedule!AG6:AK6 and when I autofill, the next adjacent column will fill with Schedule!AL6:AP6, the next with Schedule!AQ6:AU6, and so on.
I have tried offset, but am not sure if that's the right formula.
I have a workbook named Br2012. I would like a macro to copy the range names to BR12013.
View 2 Replies View RelatedI have an excel worksheet with TableNames and ColumnNames. I would like to copy the different TableNames to it own sheet with the corresponding ColumnNames. I also would like the sheet to be renamed to the tablename. I have the workbook but I don't know how to attach it.
View 4 Replies View RelatedHow to autofill "1" on the other worksheet, the situation as follow,
Sheet 1 is data input sheet.
Name
Start date
End Date
Ann
2-1-2013
5-1-2013
Billy
7-1-2013
9-1-2013
[Code] ..........
Sheet 2 is the Calendar and the autofill result should be like this.
Date
Ann
Billy
1/1/2013
[Code] .........
If I have a list in Collumn A such as:
1
1
2
2
3
4
5
5
6
6
Is there a simply excel function I can use so that in collumn B I return only the unique results. That is, collumn B will look like this
1
2
3
4
5
6
????
I am fairly new to macros and have trouble with VBA. I have a file with multiple worksheets. Each worksheet contains the name of a specific location in cell A8. I want this name in cell A8 to be the name on the worksheet tab for each worksheet in my file but do not know how to accomplish this. Is that even possible?
View 3 Replies View RelatedI have two workbooks I am using. Essentially I am copying values out of one workbook, opening a second workbook, manipulating data and pasting it. Everything is working great but one issue! The first workbook has named ranges in it that I don't want in the second workbook (just values). I don't want them because when I try this operation the second time it asks if I want to use the same name or choose a different name. For some reason it is still copying over all the named ranges (all 343 of them!). Is there a way to not allow it to do that or simply just delete the names before I close the second workbook?
Win 7 64, Office 2010
Sub CopytoDB()
Application.ScreenUpdating = False
Worksheets("Setup").Select
Range("A2:A766").Select
Selection.Copy
Workbooks.Open Filename:="D:Server MirrorDatabaseSetup Database.xlsm"
Worksheets("Database").Select
Columns("E:E").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
[code].....
I have a lot of files with data that i need to copy into a master file.
I could open each file copy the data i need and paste it into the file. But I know there must be a way to do a loop macro.
All the files are labled "Sauce Data "Date"". all the data is in the same place in each file. I can easy have a list of all these file names in a tab in a main file "Main Data".
I what to be able to open each file copy from tab "Sauce info" A1:B65, and paste into "Main Data", tab "main" and then create a long list of data.
There is an autofilter applied to worksheet A, I would like to transfer only the autofiltered range from worksheet A to worksheet B, a clear worksheet B statement would also help.
View 9 Replies View RelatedI am trying to make the cells Iam am copying paste hidden cells with all formats - seems to work fine other than the security part of them, Iam makeing a sheet for work and just trying to make it were it will not get destroyed by other users-
View 12 Replies View RelatedI use a web query to import into an excel workbook. As data is changed on the web that the query runs against, I would like the name of the sheet that is being imported into to change to one of the cells that is being imported.
View 9 Replies View RelatedI have got the task of doing the results for a local athletics mid-distance event once again and im fed up of doing it the present way. Basically i have a sheet which i input the race registrations which has the following collums: Number, Name,School,
and i have another sheet for results which have: Position,Number,Time. I then have to merge the two in a magical way and i get the results. However what i want to do is have the first sheet the same but the results sheet would be different reading: Postion,Number,Name,School, Time
But when i input the number, it will check with the other sheet and automatically fill the rest of the boxes (bar position and time) hopefully. Using my knowlegde i gathered at college(fairly average knowledge of vb) i still cant get it to work the way i planned. Is it actually possible to do, or should i go to my pet hate access?
I have this code present, however the autofill part needs to work by looking at the cells to the right & i dont know how to do this
Sub Merge()
Application.ScreenUpdating = False
Columns("A:A").Select
Application.CutCopyMode = False
Selection.Insert Shift:=xlToRight
Range("A10").Select
ActiveCell.FormulaR1C1 = "=IF(ISBLANK(RC[1])=TRUE,"""",RC[1]&RC[2])"
Selection.AutoFill Destination:=Range(Selection, Selection.Offset(0, -1).End(xlDown).Offset(0, 1))
Columns("A:A").Select
Columns("A:A").EntireColumn.AutoFit
Application.ScreenUpdating = True
End Sub
I'm trying to find a formula that increase a cell by 1/3 that will work with auto fill.
For Example if auto-filling a column:
3
3
3
4
4
4
5
5
5
Or if auto-filling a row:
3 3 3 4 4 4 5 5 5
I have a column of names with some spaces e.g. A1: BROWN, A2:empty, A3:empty, A4:SMITH, A5: empty, A6:JONES etc. All the empty cells have the same name as the one above i.e. A2 and A3 should also read "BROWN". A5 should read "SMITH" and so on down the column. Is there away to create a formula that does this automatically. I've tried a simple if command in a duplicate column which looks at the first column and tests for a blank - if it finds one it enters the name from the cell above - but this only works once and some of the empty spaces need to be filled more than once e.g. A2 & A3 above.
View 2 Replies View Relatedhow to find the next empty cell and then copy the data down, however; I am trying to do almost the opposite. I need to be able to click on a cell and have that cell's data copied above it until there isn't another empty cell. I will attach a small portion of my worksheet for viewing. Column A has account numbers and Column B has the brand of product. Unfortunately when I imported this data into excel from our software program it lists all the brands and then the account number is listed on the last row of brands.
View 3 Replies View Relatedi am trying to use a small piece of code to find the last row in an excel sheet, to copy/paste formulas and data.
Dim LastRow As Long
If WorksheetFunction. CountA( Cells) > 0 Then
'Search for any entry, by searching backwards by Rows.
LastRow = Cells.Find(What:="*", After:=[A1], _
SearchOrder:=xlByRows, _
SearchDirection:=xlPrevious).Row
End If
i am using this code like this:........................
if i filter only the DD the formula will find the last row being row 5, and the formula will fill all the cells untill that row, including 3 and 4. Is there any chance i can autofill only the active cells or filtered cells.. i don't know.
Is it possible to change the Autofill setting from 'fill series' to 'copy cells' in Excel 2003? Otherwise I have to keep changing it after each autofill, which is an additional two mouse clicks ...
View 7 Replies View RelatedAttached is a workbook with some sample data. All cells in column A have a unique value that should be applied towards all values in column B corresponding to that cell in column A. For instance, A1 should apply towards all data in B1.
What I initially did is took all the values in column B and put them into a separate worksheet (this information is on sheet 2 of attached workbook) and used the text to columns to separate them into individual cells, but still horizontally.
What I need is for the macro to take all data in one row, copy paste special values transpose (to vertical) into column B of sheet 3. THEN (here's where I can't seem to get it...) I need that corresponding unique value from sheet 1, column A, to be copied and pasted into sheet 3 and autofilled down for the number of values it corresponds with.