Autofill Cells On One Sheet When Cells On Another Are Inputted
Mar 21, 2007
I have got the task of doing the results for a local athletics mid-distance event once again and im fed up of doing it the present way. Basically i have a sheet which i input the race registrations which has the following collums: Number, Name,School,
and i have another sheet for results which have: Position,Number,Time. I then have to merge the two in a magical way and i get the results. However what i want to do is have the first sheet the same but the results sheet would be different reading: Postion,Number,Name,School, Time
But when i input the number, it will check with the other sheet and automatically fill the rest of the boxes (bar position and time) hopefully. Using my knowlegde i gathered at college(fairly average knowledge of vb) i still cant get it to work the way i planned. Is it actually possible to do, or should i go to my pet hate access?
way of protecting an array of cells on the condition that information is entered in another array of cells or vice versa. So, put simply, if data goes into a1 then a2 becomes protected (or vice versa).
I have a workbook with two sheets. The first one, let's call it the Main sheet, will be used to keep track of the touring artists of a record label. The second sheet contains a list of show venues with their respective contact info. Here's what the two sheets look like :
Main sheet mainsheet.jpg
List of contacts listofcontacts.jpg
What I would like is row D of the Main sheet to autofill, according to the contact information contained in row B of the List of contacts, when I enter a venue name in row C of the Main Sheet.
I have a workbook that uses the values that a user had entered into 3 cells to calculate multiple other charts/diagrams on multiple sheets within the workbook. Each sheet would show what the user had entered in the 3 cells to allow them to see what is being used to calculate each table. Is it possible to link these cells so that the user can change the 3 values without having to go back to where he originally entered the 3 values?
For example, a user has entered in 3 values in Sheet 1. A formula in Sheet 2 displays what is entered by the user and uses these calls in Sheet 2 for calculations. When the user wants to change the three values, he would have to navigate to Sheet 1 and enter in the new values to have the workbook recalculate all the tables. Is there a way to link the three cells from Sheet 1 and Sheet 2 so when the user is on Sheet 2, he has the opportunity to change the values on the current Sheet without having to navigate to Sheet 1 to do so?
I have a column of names with some spaces e.g. A1: BROWN, A2:empty, A3:empty, A4:SMITH, A5: empty, A6:JONES etc. All the empty cells have the same name as the one above i.e. A2 and A3 should also read "BROWN". A5 should read "SMITH" and so on down the column. Is there away to create a formula that does this automatically. I've tried a simple if command in a duplicate column which looks at the first column and tests for a blank - if it finds one it enters the name from the cell above - but this only works once and some of the empty spaces need to be filled more than once e.g. A2 & A3 above.
how to find the next empty cell and then copy the data down, however; I am trying to do almost the opposite. I need to be able to click on a cell and have that cell's data copied above it until there isn't another empty cell. I will attach a small portion of my worksheet for viewing. Column A has account numbers and Column B has the brand of product. Unfortunately when I imported this data into excel from our software program it lists all the brands and then the account number is listed on the last row of brands.
i am trying to use a small piece of code to find the last row in an excel sheet, to copy/paste formulas and data.
Dim LastRow As Long If WorksheetFunction. CountA( Cells) > 0 Then 'Search for any entry, by searching backwards by Rows. LastRow = Cells.Find(What:="*", After:=[A1], _ SearchOrder:=xlByRows, _ SearchDirection:=xlPrevious).Row End If
i am using this code like this:........................
if i filter only the DD the formula will find the last row being row 5, and the formula will fill all the cells untill that row, including 3 and 4. Is there any chance i can autofill only the active cells or filtered cells.. i don't know.
Is it possible to change the Autofill setting from 'fill series' to 'copy cells' in Excel 2003? Otherwise I have to keep changing it after each autofill, which is an additional two mouse clicks ...
Attached is a workbook with some sample data. All cells in column A have a unique value that should be applied towards all values in column B corresponding to that cell in column A. For instance, A1 should apply towards all data in B1.
What I initially did is took all the values in column B and put them into a separate worksheet (this information is on sheet 2 of attached workbook) and used the text to columns to separate them into individual cells, but still horizontally.
What I need is for the macro to take all data in one row, copy paste special values transpose (to vertical) into column B of sheet 3. THEN (here's where I can't seem to get it...) I need that corresponding unique value from sheet 1, column A, to be copied and pasted into sheet 3 and autofilled down for the number of values it corresponds with.
To be more specific, I work with highway signs, and they all have codes. the codes are priced according to their size, sheeting, and aluminum structure.
so codes can be something like : GS-4, IB-12, RB-21, and their sheeting could be: 231, 241, 245S, 420P, and their price is dependent with the size, materials, and quantity ordered. So a quantity of 3 or less of a flat sheet of aluminum, with HIP reflectivity sign would be a 231, where 4 or more of that same sign would be 241.
A workbook has the contracted price, the cells are in order. The order sheet I use is separate from this. But I have to look for each sign for all the info. How can I get the one cell to recognize the Code, along with the Quantity ordered?
What I'd like to do is fill specific cells with specific information drawn from other pages based on a combo box selection.
For example, if I were to pick 10131 in the combo box, I'd like it to fill out cells X, Y and Z with information from the three cells to the right of 10131. Assume X, Y and Z are not touching.
In file named (Book 1) I have a lots of tabs named e.g. pd1 pd2 pd3 etc.
In another file (Book 2) I need to link cell A1 (on Sheet 1) to cell A1 on pd1 (in Book1)
Which I can do fine.
In Book 1 I want to autofill the formula i have that refers to A1 on Pd1 but when I drag it I want the formula to go up in a series to refer to Pd2, Pd3.
So the final formula looks at $A$1 on Pd1 then on Pd2 Pd3.
I would like to enter a long line of data (text & numbers) into a single cell and have the single cell data populate successive horizontal data fields with automatically. The single cell data would have properties that would correspond to specific properties in the successive fields. The single cell data would remain unchanged. The successive horizontal cells would be looking for a specific piece of the single cell data.
1. I need a macro to find a unique number, say a 10 digit number starting with 4100.. and move it 1 row down and 3 rows to the left. It needs to look only in one column (E) for this number. This row contains several unique numbers, variable number of blank cells between them, all having 10 digits and starting with 4100.. - So the macro needs to repeat this for every unique number.
2)Once it does this, I need it to autofill the unique number in all the cells in column A until the next unique number is reached.
I'm looking to create a macro which displays a user entry box where the user can input a starting number and then input an ending number. The macro will then cycle through that range inputting each value into a specific cell and perform a print function. It will continue doing this until the last number in the range.
E.g. Min. Number inputted = 1 Max. Number inputted = 80 Macro will not cycle through that range: Input 1 into Sheet1 Range A1 Print Page Input 2 into Sheet1 Range A1 Print Page .....Continue doing this until it reaches 80
I am trying to get a function (sum) of several cells to be automated in a monthly spreadsheet. I can get the function to work, but how do I get it to Autofil? The syntex seems to call for a range, which will be different every month. I can't figure out how to loop it, so I thought autofill would work.
In earlier versions if I used the double clicked the autofill handle it would only fill down to the next adjacent cell containing data. Now it fills down to the bottom of all the data regardless of whether there is a blank cell or not e.g
X X X Z X X X Z X X X Z X X X X X
Now this happens
X X X Z X X X Z X X X Z X X ...Z X X X Z
How can I stop this as I need to enter different data in the next section?
I've created a User Form in VBA. When this is filled out, and they hit the enter button, I want the info they entered to automatically be entered into a new worksheet within the document.
Here's the code I currently have:
Private Sub CommandButton1_Click()
Dim iRow As Long Dim ws As Worksheet Set ws = Worksheet("Sheet1")
I am currently trying to make a digital time card for my place of employment. I has an odd set up and odd date ranges. The pay period starts on the 21st of each month and ends on the 20th of the next month.
The time cards have 5 columns for each week starting on Mondays going to Sunday (also weird its not Saturday to Sunday) What I was hoping to accomplish was being able to select the starting month of your choice for pay period and have multiple cells update the week date range.
Date Date Date Date Date
**Here would be the drop down month select.
Sept 21 - Sept 22 Sept 23 - Sept 29 Sept 30 - Oct 6 Oct 7 - Oct 13 Oct 14 -Oct 20
Need to autohide cells in sheet 2 and 3 based on sheet 1 cells that are hidden. (Example if i hide 150 switchgear on SOV tab it will hide 150 switchgear in Customer and Foreman sheets as well).
I have a sheet (sheet1) of around 900 rows with data in columns A-K. Column B contains a unique value.
Sheet2 contains data which needs to be highlighted in sheet1 and each row in identified by a unique value in Column B.
sheet1.PNG sheet2.png
In sheet 1, I only want to highlight the cell which exists in sheet 2 for the matching reference number in column B. For example, in sheet2, the value 'PM328491CN' exists and the value 'CN' is present in cell c2. I want the cell that contains this value in sheet 1 to be highlighted (cell C6).
So, find the matching reference, the highlight the cell in the row which is present in both sheets.
I am trying to get two cells to be used to adjust other cells on the same sheet repeated times.
In a inventory sheet I have 5 columns as such , A1 previous balance, B1 Qty received, C1 qty on hand, D1 last cost, E1 current avg cost What I want, is to be able to enter my weekly received items in the B1 Qty received and the new cost in D1 Last cost cells and have them calculate my current average E1 and update my qty on hand C1 total. This in itself is not the biggest challenge. I was asking if there is a way that after the E1 current average cost and C1 qty on hand are updated by that formula, that the next time I enter a new B1 qty received and new cost in D1 Last cost cell they will update again basically without changing the earlier calculations achieved .
Example: Today I have item X with a A1 previous balance of 10 , with a D1 last cost of $1, and E1 current avg cost $1
I want to receive B1 10 more today at $.50 D1 last cost, which ideally would end up showing
A1 previous 10 (or 20 if adding) , C1 Qty on hand 20, D1 Last cost .5, E1 current avg $.75
Next week I want to receive B1 10 more at $.25 D1 last cost , which then would update showing
A1 previous balance 10 (or 30 if adding), Qty on hand 30, Last cost $.25 and E1 current avg $.58
Tried to write a Macro to Range Cells in a sheet, setting the range values from a another cell. I have encounted a Run-Time error as select method of Range class failed. Below is the Macro.
Sub Macro1() Dim r1 As Range, r2 As Range, myMultiAreaRange As Range Worksheets("Pre").Activate Set r1 = Range("J4") Set r2 = Range("K4") Set myMultiAreaRange = Union(r1, r2) myMultiAreaRange.Select Worksheets("Data").Select Range(r1, r2).Select Selection.Copy Sheets("1").Select Range("B5").Select ActiveSheet.Paste End Sub
We have a simple holidays workbook, with seperate sheet tabs for each member of staff in the department to note down there holidays in a calendar.
The 1st row (from B1 and onwards) contains the day numbers of the month, ie. 1 - 31 The 1st column (A2 downwards) shows the 12 months of the year. The holidays are then marked in the relevant cell matching the dates required. The codes we use are F (full day), A (morning), and P (afternoon). A countif adds up all the occurences of the various codes and totals the ammount of used/remaining days. Hopefully that drew a picture.
The problem is, each sheet only shows the holidays marked down for that person. There is no way of checking for a "clash" (ie. 1 member of staff off on the same day as another) without flicking to the other sheets and checking yourself.
how can I get a cell shading to automatically show up on the sheets, if there is a holiday noted down (ie a value, A, P or F) in one of the other sheets?
