Autofilter With Color Cells
Jun 24, 2009
I know there's no way of autofiltering colors with Excel 2003 but it can use function in VBA to identify the colors like 3 for red, 6 for yellow and so on.
I want to be able to insert a button on the "Summary" sheet to asign with macro that canautofilter the numbers in color cells in the same column. Also with the codes I've put in VBA gave out strange numbers on blank cell which I don't want these awkard numbers to appear after typing in =GetInteriorColorIndex(whatever the cell I type in).
View 2 Replies
ADVERTISEMENT
Jan 9, 2008
Is it possible to change those AutoFilter drop-down arrows that are active? As it is now they are hard to spot which is in use.
View 5 Replies
View Related
Feb 10, 2010
When using the autofilter, the drop-down arrow turns blue in color, i.e., when some filter citerion is being used, the small down-arrow turns a different color as a way of informing the user that a filter is in place. Is there a way to control the color of this? Currently, mine turns blue, but it would be more useful if I could change it to a brilliant color in order to make it contrast more with the default black. Blue is too difficult to be distinguished by my eyes. The autofilter is turned on via a macro. If there a line of code that controls the color.
View 2 Replies
View Related
Oct 27, 2009
I have attached the relevant spreadsheet for which I need to alter the color of the columns based on Site number ( Sheet 1). % Mortality will be represented in the Y-Axis, and the Site numbers would be on the X-Axis. All columns (% Mortality) except one will be of the same color, and the one of a different color will indicate a specific site. As an example, site 86 is colored differently. The way I require the chart to look is shown on Sheet 1.
After reading through some great posts on Ozgrid, I managed to do this using conditional formatting (Sheet 2), but that sort of falls short because I am required to add a data table to the chart, and the parameter that is indicated by the column bars happens to appear twice in the data table.
I was wondering if this can be automated maybe using VBA, but with the possibility of simply matching the color of columns with the font color of respective entry in the data series.
View 9 Replies
View Related
Nov 18, 2007
I am looking for a very simple script that will achieve the following:
On the clicking of a button, Select and shade in a cell yellow, delete the yellow shading of the previous cell. The shading & selection should move up a column of cells, 1 at a time, in the following order:
From B10 to B9, then B9 to B8, B8 to B7 etc until the selection and shading is at B2. Once it is at B2 subsequent clicks will simply keep it at B2 (the top). Thus after 8 clicks the shading & selection should travel from B10 to B2, with only 1 cell being shaded yellow and selected at any one time.
View 5 Replies
View Related
Jun 18, 2008
I have a spreadsheet that i download from the net daily, which is seperated into columns of information.
I want to be able to look down a column and mark a cell in a seperate column if the cell font text is red.
For example looking down column A ... if the font text of a1 is red then mark the cell background colour of T1 red - if a2 text colour is red then mark the cell T2 red .... etc etc.
If the font colour in a1 or a2 ... etc etc is any other colour then do nothing.
I have 5 columns I wish to look down and mark in 5 seperate columns - I have tried to do this by conditional formating but don't know the fomula for checking font colour.
View 9 Replies
View Related
Feb 13, 2008
I've got an AUTOFILTER and would like to add only the visible cells in a particular column (column E). As the user changes the filter, the total would change - but I'm not sure where to even start with this one. I've attached a sample file.
View 2 Replies
View Related
May 23, 2014
I know how to filter based on cell value, and how to auto filter "does not contain", but is it possible to combine these? i.e. Filter OUT the value of a cell from a range?
View 3 Replies
View Related
Sep 25, 2009
Im sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies
View Related
Jul 12, 2006
how to scroll through visible cells after I have autofiltered a list, the same way you do when you use the arrows on your keyboard. When I try the offset method, Excel selects the following row, regardless its visibility.
View 4 Replies
View Related
Jul 30, 2008
I'm working on a VB code where I use an autofilter. I want to clear a selection in a couple of columns, where the value in the autofilter = 1.
This is the
Dim lRow1 As Long
lRow1 = WorksheetFunction.Max( Range("A65536").End(xlUp).Row)
Rows("1:1").Select
Selection.AutoFilter
Selection.AutoFilter Field:=9, Criteria1:="1"
Range("F2:H" & lRow1,"J2:J" & lRow1).SpecialCells(xlCellTypeVisible).Select
Selection.ClearContents
Sometimes there is no value = 1, which results in clearing row no.1 because this row was still selected for the autofilter.
I'd like to be able to check if there are any visible cells, before I proceed with the clearing of the selection.
I tried this:
If Selection.RowHeight <> 0 Then Range("J2:J" & lRow1).SpecialCells(xlCellTypeVisible).Select
Selection.ClearContents
But this doesnt work, because row no.1 is still selected.
Can I use an If then statement to check If there are any visible cells, then clear these, if not, resume next.
View 3 Replies
View Related
Jul 9, 2014
I am working on a file with different users entering information on different sheets (tracking the status of individual projects and activities). Using the macro below (which I found in the forums), the individual data will be combined on a master sheet. My problem is that some of the users will be using autofilters to filter their own data (for example--filtering to show only the "Open" projects). When I do the copy of the individual data, I want ALL of the data, not just the data that is being shown by the individual filter settings.
At first, I just turned the individual filters off before copying the data. The other users have asked if there is a way around this or alternatively, restore the filter values after the copy.
A key point, there are currently 8 user sheets. Each user is allowed to set their own filters and change them at will-e.g. one day, a user may filter on projects due in Q3, another day she may be looking at all projects closed in 2013.
VB:
Sheets("Combined").Select
ActiveWindow.SelectedSheets.Delete
Dim J As Integer
On Error Resume Next
[Code] .....
View 2 Replies
View Related
Apr 4, 2013
I have renamed some cells to custom names eg. renamed cell A1 to FLIGHT and B1 to FLIGHT2.
When I apply a filter to the columns and autofilter, the renamed cell now refers to a different cell! ie. FLIGHT no longer has the same text value in it
This also only happens when I autofilter by alphabetically or highest/lowest values
View 1 Replies
View Related
Aug 2, 2014
I am looking for an Excel macro that will Autofilter a worksheet to display all rows with a empty value in one column (e.g. column B) as well as display the entire row above the aforementioned row with a blank cell in column B. I need it to be "reversible" so that I can click the Autofilter button (or advanced filter button) to show all rows again.
View 2 Replies
View Related
Apr 23, 2009
I want to count the nos of cells after selecting some specific parameter in autofilter. I thought this is a simple problem & searched here in various thread but nowhere I found good solution which works nicely. I have attached a excel file where I applied autofilter in the column C & I need to count the nos of cells when I select specific parameter in filter in Column C.
View 5 Replies
View Related
Feb 3, 2012
I have the following line in a macro:
Range("b22:L" & Range("J" & Rows.Count).End(xlUp).Row).AutoFilter
This selects rows based on whether they contain data and creates an autofilter of the range.
The data Im using this on will have blank cells as the bottom rows but they will contain formulas that blank the cells based on ISNA() conditions,
How do I get the above code to only select cells with visible data and ignore those that are blank but contain formulas.
View 9 Replies
View Related
Jul 16, 2012
Thats the best I could describe that What I face today is the means to run a VBA Autofilter from an Activecell. The Activecell is a search result. I have a table that spans from A1 to E5000. The Activecell will always be in Column A. What I need to happen in when the Activecell is found an Autofilter is placed in the block of data from Column B to E. The rows will change after every search hence my dilemma. Each block of data has its own header as well
So if my Activecell is A2 then I need B1:E4 Autofiltered then Column E sorted Smallest value to Largest. The Activecell needs to remain static. The size of the blocks of data are exactly the same.
Here is a photo example of the desired result. Untitled.jpg
There are hundreds of blocks of data like this.
View 7 Replies
View Related
Feb 5, 2009
I have a formula to search a sheet for certain criteria and sum up the total, data is entered into this sheet by week number, where I then filter it for whichever week I need. I following formula works fine, but adds all the cells including hidden ones, how can i get it to ignore hidden cells??
=SUM(IF('FT Line 1-RX'!$C$2:$C$2100='FT costs 1-Rx'!B$1,IF('FT Line 1-RX'!$E$1:$GT$1='FT costs 1-Rx'!$A11,'FT Line 1-RX'!$E$2:$GT$2100)))
There is raw data in the 'FT Line 1-RX' sheet which is summed up in the 'FT costs 1-RX' sheet.
View 9 Replies
View Related
Jun 22, 2007
I need a macro that can change the text in Field 46 from Criteria1 to something else, ie from "To be capped" to "Capitalised". This is my current
Selection. AutoFilter Field:=39, Criteria1:="OPEN" 'STATUS
Selection.AutoFilter Field:=46, Criteria1:="To be capped" 'TYPE
Range("AT1").Select
how to change the text only on the selection found by AutoFilter?
View 4 Replies
View Related
Feb 7, 2013
I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
View 7 Replies
View Related
Apr 2, 2008
I’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!).
What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out.
I have posted a link to an image which shows what I want. I hope I've explained it well enough!
http://img530.imageshack.us/img530/6239/excelspfk0.jpg
View 9 Replies
View Related
Jan 31, 2013
I have a similar question regarding coloring of empty cells between two cells with specific numbers as posted in below thread : [URL] .....
This is exactly what I want. But here I have some problem with formula.
=COUNTIF(A1:Z1,1)=1
Above formula could pick cell value 1 and color the empty cells in a row between the cells having value=1. But if I want to use the same formatting for other numbers like 2 or 3 it doesn't work.
For example in row(A1:Z1) I have A1=1, D1=1, and F1=2, K1=2, and O1=3, U1=3
I required multiple conditional formatting that could color the cells based on values first from A to D then from F to K and finally from O to U.
I'm using above formatting it works with cells having values 1 but its not working for 2, 3 or any other cells values.
I have already tried replacing 1 in above formula with 2 and 3 but it doesn't work.
View 1 Replies
View Related
Jan 27, 2005
how can I automatically fill cells with certain colors based on the value of the cell. (i.e. I want to search an entire workbook and fill cells with values between 80 and 99 green, 60 to 79 yellow and 0 to 59 red.)
View 9 Replies
View Related
Jan 15, 2008
I’m trying to change color in cell B9 according to different conditions in Cell C9 (than on b10 according to c10 and so long until necessary - probably will be around 2000 lines). Since there are more than 3 conditions and in two cases condition depends on the color of the C Column, I can not use conditional formatting. I’ve searched and found similar forums here, but since I’m ignorant in VBA code, I couldn’t manage to make adjustments. So if you can help me with the code, I would really appreciate it!
Condition and Results required would be:
IF column C = “S” than on Column B = color cell light blue with white border
IF column C = “P” than on Column B = color cell Green with white border
IF column C = “A” than on Column B = color cell Yellow with white border
IF column C = “L” than on Column B = color cell Red with white border
IF column C = “C” than on Column B = color cell Dark Blue with white border
IF column C = “ ” than on Column B = color cell white
IF column C = “V” and has white background than on Column B = color cell white
IF column C = “V” and has a Dark Grey background than on Column B = color cell Dark Grey
I don’t know if the last two are feasible.
View 6 Replies
View Related
Apr 20, 2008
creating this code or fomatting in my excel file. I want to fill color in cells between the two cells that has value of say "1" or anything in it. There will be only 2 numbers at any time in any row that has the value in it. All other cells will have value of "0" or can be changed to empty cells. So, the formula should check from say range "A3 to Z3" in row and for example it gets the first numbered cell in C3 then it start filling color from C3 cell until it reaches the other cell in that range that has the number in it. Say the row "A3 to Z3" has 1 number in C3 and other in cell H3 then it should fill color between this two cells from C3,D3,E3,F3,G3 and H3.
View 7 Replies
View Related
Jun 3, 2008
I have a 2 lists of manually entered values where the values in each row are related. They are related in the sense that if the difference between them is equal to or less than, a given amount then the cell containing one value is colored Blue. e.g.
COl A holds Value x while COl B holds value y. I need to check which value is entered in columns A and B and if a given difference or greater exists colour the cell in COl B. For example the relationship relevant to a COL A value of 21.0 is 11.0.
So, I enter the following;
A1 B1
21.0 13.0 <----------------No color Blue
I enter new values
21.0 9.5 <----------------B1 is blue.........................
View 2 Replies
View Related
Aug 20, 2014
I can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.
E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA
Note: Row 1 contains command buttons and row 2 Headers.
View 4 Replies
View Related
Dec 10, 2006
I have an if statement and if it's true I would like to have the cell turn black as well as mark it with an "x"
View 7 Replies
View Related
Nov 25, 2008
a formula that you can you add cells with a certain color text only?
View 14 Replies
View Related
Jun 2, 2009
I have a table with changing lengths of the rows and columns. At the end of each row/column there is a cell with the sum. I want to put some color to it and make some additional formatting - have some borders around the main table and different colors for the empty and non-empty cells. I have the following
View 14 Replies
View Related
