I want to count the nos of cells after selecting some specific parameter in autofilter. I thought this is a simple problem & searched here in various thread but nowhere I found good solution which works nicely. I have attached a excel file where I applied autofilter in the column C & I need to count the nos of cells when I select specific parameter in filter in Column C.
View 5 RepliesI have a spreadsheet that contains dates in column A, the number of rows between each date can vary. Selecting a cell with a date in will activate a checklist in the form of a UserForm.
I am trying to create a macro that will count the number of rows from one cell with a date, to the next cell with a date, and then resize the selection for printing.
So far I have this;
Code:
Sub test()
Application.ScreenUpdating = False
Set InitialCell = ActiveCell
[Code]....
My problem with this code is that when it reselects the InitialCell, the UserForm is reactivated. Is there a way to achieve the same results without having to reselect the InitialCell, and therefore the UserForm wont pop up? I tried adding the Unload UserForm1 line but it doesnt have any affect, the form still pops up.
I want to count the number of cells in column C with one forumla that answers the question, "How many of the cells in column C contain the words, APM, BPPM, CAPM, and NMS while exluding any results that have "OUTLOOK" in Column K?
View 2 Replies View RelatedI have a macro that adds a row with predefined formulas and formating. The macro is launched by clicking on a button. However, I would like to make it possible to add more than one row at a time. My plan to do this was to use the number of selected row as input to the current macro. If the user selects row 1,2,3 and 4 (or 15, 16, 17 and 18, and so on) four new rows should be added. I would just add;
View 3 Replies View RelatedI though I could do this with a nested IF statement but it is too cunfusing for me. What I am trying to accomplish is this:
Experiment
Is Steward
EU ID
Location
Data Quality
GE
Entry Order
[Code] ........
I want to have a screen pop-up asking me what my limit < would be for column "ESTCNT" so if I put in 25 or any other number that it would highlight all the rows that are less than 25, then look at the row above and below and if it matches the same number (that is in the cell "Range" of the highlighted column) in column "Range" then copy that row to a new sheet. Meaning all tha rows that match the "Range" would be in the same new sheet.
The rows might be different lengths and that there will not always be a number in cell "ESTCNT". Column headers will always be the same but might not be in the same column each time. And if it is not to hard once it is completed to find column "SPPLOT" in the new sheet created and asking what I want to autofil the column with.
I am trying to create a macro that will run autofilter on another sheet when I select a number from a drop down menu, with that number being the autofilter criteria. I have tried the following code but it changes sheets before I can select the entry from the drop down menu.
View 2 Replies View RelatedI am using the following code to re-name filtered data in column 4 of my worksheet, but I am running into an issue when the Autofilter returns only one row of data. The End(xlDown) is selecting a range that extends to the last row of the worksheet (1,048,576).
Code:
rfiltered.Cells(1, 3).Select
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "Receivables"
Selection.Copy
Range(Selection, Selection.End(xlDown)).Select
ActiveSheet.Paste
How can I write the code so that in the event there is only one row of data, it selects just that row for the paste (and yes it would be redundant to paste over the same value) and then continues on? I would usually use a Cells(Rows.Count, x).End(xlUp).Row to find the last row of data, but I don't think that will work in Autofilter mode.
Sample Chart.xlsx
I need to enter data every month for the following month (i.e. month end close, for previous month). For this example, let's say I just entered (in May) data for April. Current year is 2014. The attached above is what I have currently, and what I want to achieve. All of the cells have formulas, but I basically don't want data and variances shown for time periods not yet uploaded, so in my example, I should only see filled-in cells for January-April, and not May-December (keep in mind that 2013 data should remain, as these are time periods in the past). I've thought about many scenarios including: modifying the formula but not changing what it is currently doing (essentially gathering and adding data from a different worksheet), conditional formatting to "white out" all cells for months where 2014 data is not available using NOW or similar function. how to do it most efficiently without disrupting what's currently in place. T
I would like to count the number of time I have a string in column C it is on an autofilter. In mine example I would like to
RHAM 3
1006 1
RHAG 7
ColA ColB ColC
Prog1Tranab-
RA2ODWRADWRHAM
RA2OFIRAFIRHAM
RA2OGVRAGVRHAM
RA2SALRAAL1006
RA2SIARAIARHAG
RA2SIARAIARHAG
RA2SIARAIARHAG
RA2SIARAIARHAG
RA2SIARAIARHAG
RA2SIARAIARHAG
RA2SIARAIARHAG
I have a two massive spread sheets in which I am comparing items from one with the other and changing in one if the other doesn't match the first. I already have reduced the processing time from 6 hours to about 2 minutes by rewriting the macro to use autofilter to make the changes. The problem I have now is that I need to keep some metrics on the changes i.e. when I apply an autofilter, I need to be able to assign a variable to the number of items actually shown after autofiltering so I can add it to a variable that is keeping track of total number of changes. I know that outside of VBA, in regular excel use, the status bar displays # of total# found during autofilter, so is there a way to tap into the program and pull that number during execution of a macro?
View 9 Replies View RelatedI have records entered in sheet 1 named "Data". The "Data " Sheet contains Model wise records with serial nos and having status as either ZERO or ONE. Zero indicated that the particular model is out of stock while One indicates it is in stock.
When I filter the data using Auto Filter for records having Status 1, a list of records are displayed. I want to create a summary report in sheet 2 wherein it displays the no of occurence of a particular Model.
What I have observed is that whenever I filter for Status 1 & within it for Model A, it displays "3 of 12 records found" in the status bar. Is it possible to capture that "3" from that message displayed. Or is there any way to count the occurence ?
I have a Excel sheet and I have put Autofilter for a particular category I choose I need to count number of items in another column(autofilter) , for eg... there are two columns Category , Items When i choose a particular Category I need to count number of Items in the autofilter for that particular category?
View 9 Replies View RelatedIs there a simple way to count unhidden rows? I saw Counting number of unhidden rows =SUBTOTAL(103,D11:D7180) and, frankly, I'm wondering if there is a way to do it without a formula. I don't need the count in a cell, per se, just a quick count of the unhidden rows of a worksheet for usage elsewhere.
View 5 Replies View RelatedI have a work book.
In column C27 and down, the user can input a date.
In column M27 down, the user chooses pass or fail.
N8, contains a date chosen by user as the "From" date and P8 the "to" date.
Cell o11 is "Passed" and cell 012 is "failed"
The user can choose a date range and input the from and to date in N8 and P8, this will count the number of pass and fails and input the number in O11 and o12.
Formulas are below.
Code:
=COUNTIFS('Aff MFR'!C27:C1663,">="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"
To make things simple, I have a range of A1:A10. Within this range I only need to select cells thats contain "Tax".
View 9 Replies View RelatedI have 2 Cells
Cells( 2,1) and Cells ( i , 1) with "i" a While Counter, and i need to Select All the Cells between that, including both cells.
I'm tring Cells(2,1):Cells(i,1) but obviously this didn't work
I've got an AUTOFILTER and would like to add only the visible cells in a particular column (column E). As the user changes the filter, the total would change - but I'm not sure where to even start with this one. I've attached a sample file.
View 2 Replies View RelatedI know there's no way of autofiltering colors with Excel 2003 but it can use function in VBA to identify the colors like 3 for red, 6 for yellow and so on.
I want to be able to insert a button on the "Summary" sheet to asign with macro that canautofilter the numbers in color cells in the same column. Also with the codes I've put in VBA gave out strange numbers on blank cell which I don't want these awkard numbers to appear after typing in =GetInteriorColorIndex(whatever the cell I type in).
I know how to filter based on cell value, and how to auto filter "does not contain", but is it possible to combine these? i.e. Filter OUT the value of a cell from a range?
View 3 Replies View RelatedIm sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies View RelatedA macro that only selects cells which are coloured light green. I need this so that I can add it to an existing macro that I've written to remove conditional formatting from these cells only.
I am trying to select a range of cells. The range I need to select starts in Cell A1. I need to select every row with data in column 1 up to the first row with no data. I then need to expand the range to all columns up the last column with data, including columns with blank cells.
The problem with my code relates to the selection of columns. It is only selecting up to column F. Column G is empty, Column H has data, Columns I-J are empty, Columns K-R have data.
when run a macro to make the macro select all the cells in a specific column that only contain data i.e. i have a spreadsheet 5 columns wide by 23 rows deep, the macro at the moment selects the 5 columns (this never changes) but the number of rows always changes 123, 56, 1, etc i need to to always select the rows that have data.
View 14 Replies View RelatedI found the code below which randomly selects number and places them into column "I". However, I need the code to search through column "F" and randomly select numbers from column "F" and place the result in column "I".
' Select the indicated number of items from the
' currently selected cells.
Public Sub SelectRandom(ByVal num_to_select As Integer)
Dim num_items As Integer
Dim indexes() As Integer
[Code] ........
I use this code to select highlighted cells within a column
Code:
For Each CELL In Range("A1:A" & Cells(Rows.Count, "A").End(xlUp).Row)
If CELL.Interior.ColorIndex xlNone Then
CELL.Select
End If
Next
the thing is that it is working from bottom to top, is there a way to make it work from top to bottom?
how do I select all cells from say B6 to the one above the active cell, and all the cells below the active cell, ie i want to select all cells in a column except the active cell and the first 5 cells. (in VBA of course).
View 8 Replies View Relatedsomeone the VBA code which only selects visible cells in a sheet.
i.e. if for example, range("a1:d5") contained data BUT
range("a6:d100") contained formulae but NO data
the macro would only highlight range("a1:d5")
However, when say range("a6:d10") contained data, then the macro would highlight range("a1:d10")
and so on.
I want the mcro to do this without me having to manually change the ranges when running the macro.
How do I use SpeciaCells to select cells in a range with a certain value?
In the same manner that you can use SpecialCells to select blank cells and then delete that entire row I want to do the same for a cell containing a specific value/text
I have been using SpecialCells to assign a value in blank cells as a temporary marker. I then need to delete the rows with the temporary markers. I have not been able to use SpecialCells to select the temporary markers .
I have two excel sheets with lots of data in, that i import from a database. Based on these two sheets I make four other sheets that are suppose to get input from this two sheet. To decide what lines I shall copy to the other sheets, I use a filter. But my problem is that there can occur new data too the two main sheet....
View 6 Replies View RelatedUsing VBA, I need to Select A1:C14.
The problem is that A1:C14 contains blank cells, and there is also an adjacent column D that I do not want to copy.
So, UsedRegion and CurrentRegion aren't doing it for me. (It selects Column D too.)
Obviously, this is an example...the real data set is an export and varies in size.