Color Cells Based On Multiple Conditions Of Different Cells
Jan 15, 2008
I’m trying to change color in cell B9 according to different conditions in Cell C9 (than on b10 according to c10 and so long until necessary - probably will be around 2000 lines). Since there are more than 3 conditions and in two cases condition depends on the color of the C Column, I can not use conditional formatting. I’ve searched and found similar forums here, but since I’m ignorant in VBA code, I couldn’t manage to make adjustments. So if you can help me with the code, I would really appreciate it!
Condition and Results required would be:
IF column C = “S” than on Column B = color cell light blue with white border
IF column C = “P” than on Column B = color cell Green with white border
IF column C = “A” than on Column B = color cell Yellow with white border
IF column C = “L” than on Column B = color cell Red with white border
IF column C = “C” than on Column B = color cell Dark Blue with white border
IF column C = “ ” than on Column B = color cell white
IF column C = “V” and has white background than on Column B = color cell white
IF column C = “V” and has a Dark Grey background than on Column B = color cell Dark Grey
I don’t know if the last two are feasible.
View 6 Replies
ADVERTISEMENT
Nov 21, 2006
I was hoping there was an alternative to having to use so many named ranges for each sublist (there would many sublists in the actual workbook). Anyway, I'm a little uncertain about the code you posted - do the LIST and SUBLIST codes go in Source in Data Validation, or in Source in Dependent Validation Lists Based On Header Values? Can you give me a bit more instruction on this? Also, I'm trying to use the following code to color cells upon a change in value in V1 or V2, but can't get it to work. Can you kindly tell me what's wrong with it?
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address <> "V1" Or "V2" Then Exit Sub
Select Case [V1].Value
Case "A"
Target.Interior.ColorIndex = 40
Case "B"
Target.Interior.ColorIndex = 35
Case "C"
Target.Interior.ColorIndex = 36
Case "D"
Target.Interior.ColorIndex = 34
Case "E"
Target.Interior.ColorIndex = 19
Case "F"
Target.Interior.ColorIndex = 24
End Select
End Sub
View 7 Replies
View Related
Jun 5, 2008
In 'MAIN REPORT' there are thousands of columns of data, of which the important columns are 'Factory No.' and 'Row No' and 'Quantity'.
Each factory has its own worksheet as well.
In each of those factory sheets there is a 15x65 grid for each of the 65 rows that are mentioned in MAIN REPORT.
I have created and IF statement that checks if there is any data in 'Quantity row' and if there is it enters a "1" in the that cell of the virtual Factory grid.
This is the formula:
=IF('MAIN REPORT'!I2="","",1)
However, this simply checks that data while there is only 1 quantity for each row of each house.
Sometimes there will be different quantities (for diff. products), and I need a formula/macro that checks the line no. column and then,
If there are 5 items in row 7 for example then it will place five "1"'s in the first five cells of row seven in the corresponding factory sheet.
View 3 Replies
View Related
Nov 22, 2012
I want to highlight the cell of Column 'A' of excel only when it does not contain the text like "Verify", "Validate" or "Evaluate" in its content if, the value in corresponding cell of Column 'B' holds the value 'Y'. Secondly, the column 'A' can't contains the words like 'Verify', 'Validate' and 'Evaluate' if the corresponding cell in Column 'B' holds value 'N'. So just need to highlight those discrepancies if its there.
Column A
Column B
Expected Action
Press F3
N
Its Fine
Verify this..
Y
Its Fine
this....
Y
Need to Highlight Cell of Column A as Value in Column B is Y but the column A does not contain any value like "Verify", Validate" or "Evaluate"
Verify This.
N
Need to Highlight Cell of Column B as the Value of Column A contains words like "verify", "validate", "evaluate" but corresponding cell value in column B does not hold value "Y".
View 3 Replies
View Related
Jul 16, 2013
I'm trying to remove cells that contain certain suffixs. Here is the code I'm trying to use:
Code:
For i = 7 To 2000
If Cells(i, 7) = "IV," Or Cells(i, 7) = "Jr," Or Cells(i, 7) = "III,"
Then Cells(i, 7).DELETE Shift:=xlToLeftEnd IfNext i
but it does absolutely nothing. I've used this for similar macros in the past and it worked just fine.
View 4 Replies
View Related
Sep 19, 2013
I am trying to count the number of unique entries in a sheet, that also satisfy 2 other conditions.
I've attached an example sheet : Example email report.xlsx
The result I need is: The number of unique values in column E, that also have NULL in column G and NULL in column I.
So, in the example, the result would be 7.
I know I can do this by conditional formatting and filtering, but would prefer a formula, and perhaps also a macro that I could apply as the number of rows in each sheet is up to 20000, and each month's sheet will be a different size.
View 8 Replies
View Related
Jun 12, 2009
A1:A6 have numeric values 1 to 6.
I want the conditional format values to change Based on the value in Cell B2.
If the value in B2 is "old", then I want these conditional format conditions for A1:A6. Numbers between 1-2=green text, 3-4=orange text and 5-6=red text.
IF the value in B2 is "new" then I want the conditional format conditions in A1:A6 to change so 1=black text, 2-3=green text, 4-5=orange text and 6=red text.
I know how to do multiple conditional formats but i have no clue how to change multiple conditions based on another cells value.
View 6 Replies
View Related
Jun 18, 2014
I have a worksheet ("ALL JOBS") with huge row data and the row data will vary every day. My problem is there will be a lot of blank cells which I need to fill manually and its tacking lot of time of mine.
Code to fill these blank cells automatically with some specific texts based on the attached conditions.
I have attached the workbook for more details. FillCellsTest.xlsm‎
View 10 Replies
View Related
Aug 6, 2008
My Excel skills are basic at best, with no knowledge of VBA other than finding the VB Editor. What I'm trying to do: Attached is the file I'm working with, to give you a better idea. When a name is selected in column B, the cells in the non corresponding columns E to N should have a black background color. For example, when you select Mike in column B, the cells in that row in columns I to N, named Dave and Dean, should become black. If you select the name Dave, columns E to H (Mike) and M to N (Dean) should become black. In addition, the background color of the non-black cells should change depending on the status.
OK : green
FAIL: red
N/A: orange
Exceptions: blue
The attached file shows a few possible results, manually entered.
View 7 Replies
View Related
Sep 13, 2007
I am getting a "Run-time error:'13' Type Mismatch" when we try to paste a value (in this case "Y" or "N") in multiple cells at once. I did look up this error on the microsoft site and found this. http://support.microsoft.com/kb/821292. which didn't seem to be the exact issue I was having because I am not using a macro.
Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
Call ChangeRowColor
If Not Intersect(Target, Range("$A:$E")) Is Nothing Then
Select Case Target
Case "y", "Y"
icolor = 4
Case "n", "N"
icolor = 3
Case "?"
icolor = 6
Case "n/a", "N/A"
icolor = 13................
View 2 Replies
View Related
Jan 7, 2013
I am trying to find a way to write a Macro that will auto color multiple cells based on what data is displayed in one cell. The cell I want to reference is a vlookup cell.
Basically this is a part label. And depending what part is selected from the list my vlookup will display its position on a vehicle(i.e.. FR, FL, RR, RL, Etc..). So if vlookup comes back with FR I want the various cells on the label to be orange, etc..
ALSO: if there is a way to embed it so it does this automatically (rather than run the macro each time).
View 7 Replies
View Related
Sep 26, 2007
I am trying to add a third if statement to my existing code looking to see if a cell in a column is blank and the corresponding cell in another column contains a number that is greater than or equal to 1. I can't figure out how to write that part of my IF statement.
If Cells(r, 4) = " " And Cells(r, 3) >= 1 Then
Cells(r, 1).Resize(1, 5).Interior.ColorIndex = 35
Set rng = Union(Cells(r, 1), Cells(r, 3), Cells(r, 4))
rng.Copy
Worksheets("Sheet1").Range("G40:I40").End(xlUp).Offset(1, 0).PasteSpecial (xlPasteValues)
Application.CutCopyMode = False
Cells(r, 5) = "NEW"
End If
Next r
View 4 Replies
View Related
Apr 2, 2008
I’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!).
What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out.
I have posted a link to an image which shows what I want. I hope I've explained it well enough!
http://img530.imageshack.us/img530/6239/excelspfk0.jpg
View 9 Replies
View Related
Jan 27, 2005
how can I automatically fill cells with certain colors based on the value of the cell. (i.e. I want to search an entire workbook and fill cells with values between 80 and 99 green, 60 to 79 yellow and 0 to 59 red.)
View 9 Replies
View Related
Oct 27, 2009
I have attached the relevant spreadsheet for which I need to alter the color of the columns based on Site number ( Sheet 1). % Mortality will be represented in the Y-Axis, and the Site numbers would be on the X-Axis. All columns (% Mortality) except one will be of the same color, and the one of a different color will indicate a specific site. As an example, site 86 is colored differently. The way I require the chart to look is shown on Sheet 1.
After reading through some great posts on Ozgrid, I managed to do this using conditional formatting (Sheet 2), but that sort of falls short because I am required to add a data table to the chart, and the parameter that is indicated by the column bars happens to appear twice in the data table.
I was wondering if this can be automated maybe using VBA, but with the possibility of simply matching the color of columns with the font color of respective entry in the data series.
View 9 Replies
View Related
Jun 3, 2008
I have a 2 lists of manually entered values where the values in each row are related. They are related in the sense that if the difference between them is equal to or less than, a given amount then the cell containing one value is colored Blue. e.g.
COl A holds Value x while COl B holds value y. I need to check which value is entered in columns A and B and if a given difference or greater exists colour the cell in COl B. For example the relationship relevant to a COL A value of 21.0 is 11.0.
So, I enter the following;
A1 B1
21.0 13.0 <----------------No color Blue
I enter new values
21.0 9.5 <----------------B1 is blue.........................
View 2 Replies
View Related
Nov 18, 2007
I am looking for a very simple script that will achieve the following:
On the clicking of a button, Select and shade in a cell yellow, delete the yellow shading of the previous cell. The shading & selection should move up a column of cells, 1 at a time, in the following order:
From B10 to B9, then B9 to B8, B8 to B7 etc until the selection and shading is at B2. Once it is at B2 subsequent clicks will simply keep it at B2 (the top). Thus after 8 clicks the shading & selection should travel from B10 to B2, with only 1 cell being shaded yellow and selected at any one time.
View 5 Replies
View Related
Jun 18, 2008
I have a spreadsheet that i download from the net daily, which is seperated into columns of information.
I want to be able to look down a column and mark a cell in a seperate column if the cell font text is red.
For example looking down column A ... if the font text of a1 is red then mark the cell background colour of T1 red - if a2 text colour is red then mark the cell T2 red .... etc etc.
If the font colour in a1 or a2 ... etc etc is any other colour then do nothing.
I have 5 columns I wish to look down and mark in 5 seperate columns - I have tried to do this by conditional formating but don't know the fomula for checking font colour.
View 9 Replies
View Related
Dec 10, 2006
I have an if statement and if it's true I would like to have the cell turn black as well as mark it with an "x"
View 7 Replies
View Related
Jun 27, 2014
So I need highlighting certain cells. I have a sheet that keeps track of people's points over a series of races to determine who will make the "team". The team is selected one at a time based on the most points, starting with the leftmost column and working right. What I would like to do is highlight the highest score in each column (which I know how to do) but then tell the sheet to ignore all the other numbers in that same row. That way if the person with the most points in column one (M in my sheet) also has the most in column two (N in my sheet) Excel will ignore that number in the second column and highlight the next highest number.
I'll attach my file so there is a visual reference : ODN Points.xlsx‎
View 3 Replies
View Related
Jul 1, 2008
I have 3 sets of data - Process, Step, and Time Range. I am trying to generate schedules based on Process, with Step being the vertical axis, and Time Range being the horizontal axis. Hence, I'll have schedules showing that for each Process, the number of cases that each Step that has taken, for example, "0-7 Days", "8-14 Days", etc.
I have four Processes in total - A,B,C, and D; 15 Steps from 1 to 15; and 7 Time Ranges. I have attached a sample .xls showing the schedules that I would like to popuple the counting onto. A little more details, not all Processhas all 15 Steps, i.e. Process A has Step 1 thru Step 9 only, Process D has Step 1 thru Step 15 excluding Step 11 & 12I am actually creating a template where data will keep on expanding and updatingwould prefer excel formula rather than VBA code as I am not very familiar with what to do with VBA codes
View 4 Replies
View Related
Aug 14, 2008
I have a large list of items and I want to be able to count and sum up the cells based on multiple conditions. Lets just say for example I have a list like this, also the list updates and adds more rows for more information, so its not confined.
xxx Open
xxx Complete
yyy Complete
yyy Open
xxx Complete
xxx Open
I want to be able to count how many xxx are Open. I assume it involves either CountA, CountIF, If, And but I keep getting errors when It searches for text. I can use CountA and have it search for text of a single columb just fine, but I cant do contitions based on multiple columbs with just a cell formula.
View 9 Replies
View Related
Feb 27, 2013
I am writing a data validation macro which checks various conditions and highlights cells if they are incorrect.
i.e. If cell in column D = "specific text", then cell in column AH of the same row must = "specific number". If it is not that number, colour the cell red. If another cell in column D = "another specifci text", then cell in column AH of the same row must = "specific number". If it is not that number, colour the cell red.
What I've found is that I can get one condition of this nature to work, but if I run two or more in the one macro, that they supercede eachother (and thus the final one is the only one that works).
See below sample code.
Code:
Dim val As Integer
val = UsedRange.Rows.Count
For i = 2 To val Step 1
[Code]...
View 4 Replies
View Related
Sep 8, 2013
I have this excel file with 5 columns on it and one of the columns is dependent on the four columns. I just want to automatically fill out the 5th column (Completed, In-progress and not yet started) based on the conditions set on the four columns. Although, the four columns have many conditions, it has been categorized with 3 colors. If all of the 4 columns are GREEN, 5th column will show Completed, If all of it are orange- Not yet started and if one of the columns had different color 5th column will reflect -In progress.
View 1 Replies
View Related
May 22, 2006
=AND($AE$2:$AE$10<=$F$2:$F$2000;$AE$2:$AE$10>=$E$2:$E$2000) With this I am checking for conditions to be true or false
Lets say I am checking AND(AE2 <= F2 ; AE2>=E2) this tells me if date in cell
AE2 is smaller or equal to Cell F2, but how can I set this fromula to check if all the cells from F2 to F1000 are equal to AE2 so If I write date into Cell AE2 it checks all dates from F2 to F1000 and check if condition is true or false
(and if I write date in cell AE3 it should check all the dates from F2:F1000, if date in AE3 is in this range)
View 9 Replies
View Related
Mar 5, 2008
I have a spreadsheet of actions/tasks. I have a column with the expected completion dates of each action and another column stating whether the action/task is "open" or "closed". I would like to highlight any actions that have gone past their expected completion date and are marked as still being "open". Obviously i dont want any row that are closed to be highlighted. I know the =TODAY()- B1>0 formula will highlight the dates cell that have expired but how do i extend this formula to what i require.
View 5 Replies
View Related
Jan 28, 2013
I have an issue log containing (separate) columns with dates, numbers and text.
One column (A) has the status (open/in progress/pending/closed/re-opened)
One column (B) has raise dates
One column (C) has close dates
One column (D) has the type of track (this is text, 3 types)
I want to count the amount of cells that have a close date before date x, given they are open (in Column A), and for a specific track (column D).
After creating a new sheet with a date range in one column encompassing all dates that occur in my column B & C, I tried to come up with a formula to count how many cells, and consequently how many issues, were open (or closed) on a particular date per track and as a whole.
So for instance; count cells in column C if Column C is before date 101112 and Column A is open and column D is "Build".
After trying COUNTIF and SUMPRODUCT the conclusion is I can't get it right.
View 3 Replies
View Related
Nov 2, 2009
I'm trying to write a formula where I can add the values found in non-sequential cells in a row based on if the value in the previous cell in the same row meets certain criteria.
View 14 Replies
View Related
Oct 1, 2009
I have a list of people to send drawings out to. I have already made the selections am just trying to work out how to simplify the output so as to use as a field in a data file to go onto a letter.
"| A01 | A02 | A03 | A04 | A05 | A06 | A07 |" are for Joe Bloggs
( | are cells)
In another cell, i would like to merge them together like so
"A01-A07" are for Joe Bloggs
And also as follows
"| A01 | | A03 | A04 | A05 | | A07 |" are for John Smith
would like this to be
"A01, A03-A05,A07" are for John Smith.
So differing conditions depending on what happens in the range. I have had a couple of attempts at this using a VBA concatenate command, I can get them to display like "A01,A02,A03..." with a selected separator, but cannot get it how i want it.
View 4 Replies
View Related
Apr 17, 2012
I have 2 worksheets (X and Y) and am trying to write a macro/vba to copy certain cell values from a row if that row has a marked cell. For example, on sheet X, marked cell is column P and when P = "Y", then values from cells B, D, I, J, L need to be copied to sheet Y.
Sheet Y has multiple rows and the values from X need to be copied into appropriate rows. B from X goes into A from Y, D into B, I and J into C, etc.
Im not sure how to go about this other than have every cell copied and then filtering sheet Y. But Id like to have a macro only copy marked rows and appropriate cell values (some contain formulas) as the data is constantly changing and sheetY has to be printed up.
View 3 Replies
View Related
