I am having an issue with automatically transferring data from several worksheets into a single summary and analysis worksheet. I receive single worksheet Excel files with data from a hundred people and need to move it to a summary sheet to produce totals, averages, etc., without manually selecting the data and doing copy/paste a hundred times.
View 9 Replies
We want to transfer row data based on criteria in that row to another sheet. We only want to transfer certain cells in the row. We have a column that is named status that we want to trigger and identify the row for transfer and then its location in the new sheet. We tried vlookup but it would only take the first instance of a specific status in the column and not take subsequent instances. We then tried the index function but could not get it to work correctly. I hope this makes sense. There will be a high volume of data being inputted continuously so I don't think that copy and pasting is a viable solution....
View 9 Replies View Relatedhow to Transfer data between worksheets using multiple criteria?
View 1 Replies View RelatedI want to transfer the data of one worksheet (to be added everyday) to multiple sheets.
View 4 Replies View Related1) I have a Master worksheet that combines/appends data from 5 worksheets. The data in the 5 worksheets is cleared on a daily basis once data has been transferred (using a macro) to the Maser sheet.
2) I use the Match and Index formula for the 5 sheets. Column A "Symbol" being the primary value
Problem:
I have Matching column headings " Date" in 2 worksheets, I can only use date data from one of the sheets that contain the date column data. Here is the formula I use in the master to accept data from the worksheet
=If(Sheet1!C2=0,"",Sheet1!C2)
Sheet1 has the column heading "Date" that is linked to Master Worksheet column Heading "Date". Is there a possible way to re-write the formula where It can accept data from either sheets instead of only 1 sheet?
Going back to the fact that I have 2 date columns in 2 worksheets
Lets say for example;
I have Symbol AAA in Sheet1
I have Symbol ZZZ in Sheet2
I have Symbol GGG in both sheets......................
I have a main worksheet with several hundred different categories. I need to separate them into individual worksheets. Instead of inserting a new worksheet and naming it manually, is there any way to automatically create and name each new worksheet with a cell reference from the main sheet - something to the affect of Name of WorksheetABC=WorksheetMain cell A4.
View 6 Replies View RelatedI'm looking to build a macro which will automatically transfer a line of text from one worksheet to another within the same workbook. Once the macro has been run, the text in the original sheet should disappear and re-appear in the other worksheet. It should appear in the same column, but different line from the original.
I have two worksheets (Sheet1 and Sheet2).
For example I have three columns named Name, City and Telephone.
UserForm1 has three textbox(TextBox1, TextBox2 and TextBox3).
All three textboxes data populated from sheet1 (Name, City and Telephone) by selecting a comboBox.
The code is below... and which is working fine.. The problem is in my next code. I am trying to amend data in all worksheets but it is not working.
Private Sub ComboBox1_Change()
Dim strNamedRange As String
Dim lRelativeRow As Long
With ComboBox1
If .ListIndex > -1 Then
strNamedRange = .RowSource
'ListIndex starts at zero
Using Excel 2003,
I'm trying to come up with a formula that will take the students Total Pct. (column G, G12 is first cell & G41 is the last) from the worksheet called Juniors and find their Total grade (Column H, H12 is first & H41 is last) from the worksheet called Total Days. The % column on the Total Days worksheet is A (cells A10:A22) and the Grade column is B (cells B10:B22)
Juniors worksheet
Tot. Pct.
Tot.Grade
119.5%68.3%90.2%80.6%78.0%70.7%95.1%165.2%95.1%200.0%
Total Days worksheet:
%Grade99A+93A91A-89B+83B81B-79C+73C71C-69D+63D61D-60F
I am trying to quickly transfer all worksheets in a directory into one worksheet listing all worksheet names in the tabs in number order.
The formula have so far is below. But it does not name the individual tabs as the worksheet names in no order.
Sub GetSheets ()
Path = "Y:
Filename = Dir(Path & "*.xls")
Do While filename ""
Workbooks.Open Filename:=Path & Filename, ReadOnly:=True
Sheet.Copy After:=ThisWorkbook.Sheets (1)
Next Sheet
Workbooks (Filename) . Close
Filename = Dir ()
Loop
End Sub
The worksheets appear as follows 1982-001, 1982-003 up to 1982-250 ( I want them in single workbook but as multiple tabs in number order)
Need Macro to automatically printout my worksheets daily at a specifi time?
View 9 Replies View RelatedI use excel and would like to know how to copy a large volume of address data but at the same time filtering out irrelevant data placed under each other in a row, in this case, air compressors air conditioning web address etc ( see below for example). I need the first 5 lines only. The rows of unwanted data are irregular i.e some have 10 lines, others 5 , and others 2 or one line which makes using a formula difficult as there is no consistency. The data eventually need to be placed horizontally in columns to be compared to other address lists. To make matters worse, the text data has been merged and wrapped.
BDD LIMITED
3 Telford Place
L*****r QLD 4315
Phone: 07 5777 3622
I have a spread with five tabs. Each tab is a person's job responsibilties for numerous properties. Each person works with a property called Orange Avenue. I want to create a tab for JUST Orange Avenue items but want it to automatically pull any and all info from each tab where that person's Ornage Avenue duties are.
cells(a,b):cells(a+4,b) have 1,9,9,0,5
cells(a,b+3):clells(a+4,b+3) have 1,9,0,emtpy,empty.
how to fill 9,5 to empty cells.
I'm trying to convert this code so it transfers the data without the input box being needed.
Dim response As Long
Dim strLastRow As String
Dim rngC As Range
Dim strToFind As Variant, FirstAddress As String
Dim wSht As Worksheet
Dim rngtest As String
Application.ScreenUpdating = False
Set wSht = Worksheets("Transfer Sheet")
strToFind = Application.InputBox("Enter Your Initials")
If strToFind = False Or strToFind = "" Then Exit Sub
With ActiveSheet.Range("H2:H5000")
Set rngC = .Find(what:=strToFind, LookAt:=xlWhole)
If Not rngC Is Nothing Then
FirstAddress = rngC.Address
Do
strLastRow = Worksheets("Transfer Sheet").Range("A" & Rows.Count).End(xlUp).Row + 1
rngC.EntireRow.Copy wSht.Cells(strLastRow, 1)
Set rngC = .FindNext(rngC)
Loop While Not rngC Is Nothing And rngC.Address <> FirstAddress
End If
End With
I have to workbooks and I want to populate one of them with data from the other. The receiving document has the fields Account and SubAccount which I need to match up with the account and subaccounts in the other workbook.
However, in the other workbook, the line looks like "1000 Wages 000001" (which is account, name, subaccount). I can't find out how to have my receiving document scanning the providing document and when it finds an account and subaccount (in the above string) that matches the account and subaccount in the receiving document, to bring over the data.
From the attached spreadsheet I need to transfer all the rows where the issue status in column T is either ongoing or open. Now I know how to transfer them over if row 1,2,3 etc was going into row 1,2,3 etc into the new spreadsheet but as not all rows from this sheet is going over I need to now how to transfer data so in the new spreadsheet it just follows down rather than have spaces in it. i.e. if on this sheet I need to transfer data from rows 1, 5, 10, 15 on the new one they go into row 1,2,3,etc
View 7 Replies View RelatedThere’s one “master table”. Two columns in master table are titled “Name-1” and “Name-2”, and all columns in front of it carry “Properties” corresponding to these names.
In a “second” table, when we choose/type the Name-1 and Name-2, corresponding properties should automatically be picked up from the master table. Is that possible?
I have a sheet with 1250 data. All are in Column "A" I want to print them out and therefore would like the data also in Column "B" and "D" in order to save printing paper and make it easier to search. Since the data is alphabetical sorted, doing it manually is a big job.
View 6 Replies View RelatedI have a new spreadsheet that I made to give us the break down of each invoice we create. what we want is to see each job that is done (by code), the amount we charge per each, the cost of goods per each, and the profit margin. In this spreadsheet I have two tabs. in tab one it has the form I made that has a place to input the data that will change with each invoice as well as a section that is broken down into columns. In these columns I have it listed this way. CA=Job code, CB=Job Description, CC=how many, CD=Charge ea., CE=rate total, CF=COGS ea., CG= COGS total, CH=profit
I have the formula done for all of the math the get the totals. My idea was to make a second tab. In tab 2 I have everything listed in columns that will go into tab one. It is broken down like this. CA=Job Code list, CB=Job Description list, CC= charge ea. CD= COGS ea.
What I want to be able to do is when I type in the job code in the first cell under the column A on tab one, it will bring over all of the info from tab 2 and put it in the right spot for that code. So if I typed in say TT001 in that cell it would bring over the description matching that code and put it in the cell under B, along with the charge in column D, and the COGS under column F. And I want it to be that way for each code I type in and it will be different each time I fill this out. How do I explain this part? Ok so I a new invoice made its # 22. I take this spread sheet and do what I want and get all the totals so I print it out. I then want to be able to clear all the info and or just type in a new set of codes that will be on invoice # 23 and then #24 etc.
So what I am saying is the codes will be different each time I fill it out. that's why I have them listed on a different tab and will just put them in tab one long enough to get the total and print it out. Is that clear as mud? I will stop here and wait and see what questions I get back.
I have a program I built and need to transfer data from a form, from workbook "C" to another workbook "W". The workbooks are open by different users . 90% of what I locate on the Web pertains to worksheets and what don't, does not work. The folders are stored in my Public Documents.
View 4 Replies View RelatedHow to transfer data from one workbook that's open to another in a macro form. I included two sample data workbooks I have. Sample will have the macro inside it and will already be open for the other portion of the macro that will be running. I already have code that will open up the Sample2 file. I'm trying to take specific data from Sample and paste it into a summary sheet in Sample2. In Sample i will be cycling through roughly 30 sheets to find this data but I only included one because I just need to know the basics on how to make this work and then how to modify it.
Sample2.xlsx Sample.xlsx
i need the data from columns D & E on the JOKE sheet to be transferred to columns F & G on the sheet called MY PRODUCTS...
you will see that the products may have slightly different names but the product codes (column C on the joke file and column E on the my products file) are always the same.
i want to just click a button and add the data from sheet 2 tab to the columns on sheet 1 tab.
my products.csv
joke.csv
I'm trying to get my code to search through some information and transfer the data from one sheet to another. Trying to find out why my code isn't working. I keep getting errors...
Here is the code I am having trouble with...
I need to transfer a large amount data (~2,5 million lines of data) from one spreadsheet to another while making sure the destination file is kept in a certain format.
Spreadsheet "oxno" is the file that needs filling out with data provided to me in spreadsheet "ox"
The value that is the matching criteria will be the ITS account number (Field B in "ox" and field A in "oxno") and the currency (Field B in "oxno" and field G in "ox")
So I want a macro to look in "oxno" and use field the values of field "a" & "b" and search for the them in "ox" in fields "B" & "G". Once it finds a match it should copy the value of field "I" in "ox" and paste into field "n" on "oxno".
The next data to be copied should be what goes into field "O" in "oxno" this data is derived from field "L" or "M" but only when its of numerical value with one non numerical field in it (usually a "/"). Last value that I need copied over is Field "T" on "oxno" this is derived from field "J" or "M".
I realise the potential conflict because two sets of queries will be looking to gather values from field "M" on "ox". That is why I am hoping when we look for value for field "O" in "oxno" we only look for numbers with one non numerical field in it (usually a "/") .
After finishing writing this up, I realise how wordy this has become appologies for that, but hopefully someone will be able to understand what I am looking to achieve and will be able to suggest a solution.
on the "all data" sheet, there are two rows that have a Y for file missing - these are to be marked, so that they may be focused on finding their file
currently, i am doing as such and then filtering by that column to print out a list, and would like a simplified solution (populate sheet "missing") with just those rows who have missing files - so that another user may easily view such data without having to fondle around with the master list
I have two worksheets one that has a weekly schedule and sheet2 (daily attendance) where i want to transfer One day at a time but i only need the Job role,employee name and shift for that day, then i need to do the same for each day but i don't want seven sheets. please find attached an example sheet.
View 2 Replies View Relatedi have the following macro which transfers credit control data from an outstanding tab to a paid tab:
View 9 Replies View RelatedI am trying to transpher data between two userform.
The Idear, To store information within a list box on a userform and select what list items "information" is to be copyied to another useform's Textbox.
To have the 1st userform with a Text Box and one Button. When the user click the button the userform containing the listbox " information" is displayed. On this form the user can select an item "Information" that they want to be transphered into the other useform's textbox. (any information that is going into the textbox must only be added to the textbox information as a new line)
i need your help by a code to transfer the data mentioned in ( main ) sheet ( in attached file ) to the ( 8 agents ) sheets which addressed (A,B,C,D,E,F,G,H) ( in same cells for easy using the code ).
