Changing Sheet Number Automatically While Dragging
Mar 8, 2007
I have worksheets named 1 to 100. In a different worksheet "Summary" I have a summary of data of those worksheets. I want to change the worksheet number automatically in a row by dragging.
For example, in worksheet "Summary" ....
appending excel sheet number in a formula. Here is the example.
In an excel book, I have sheets 1 to 50. In each sheet i have a standard format to enter the details. And in one sheet I want to keep some summary with required cells. I made a table by applying formula, for example in cell A1 i kept formula ='9'!$D$9. In this '9' refers sheet9. In the similar way i want to capture the data from all sheets.
In the following sheet I'm tracking daily numbers against a monthly total. In the cell E4 for example I have a minimum per day number needed which is based on the monthly goal divided by the number of days availble to work. What I would like to be able to do is have the number auto-adjust if a letter (i.e. V=Vacation, S=Sick, etc...) is used in place of a number on any given day.
In my sheet called summary I have the names of the rest of the tabs in the book in cells B5 to B34. We want to be able to change the names of the tabs by changing their respective cell on the summary tab. So “sheet1” corresponds to B5, “sheet2” to B6, “sheet3” to B7, etc.. So if I change the name in B5 to say “APPLE” I want the tab for sheet1 to change to APPLE. When I change B10 from “sheet6” to “Lemon” I want sheet6 to be titled “Lemon”.
The full formula is quite long as this pick up the data off over 300 work sheets. (there's probably an easier way to do this aswell) When I copy or drag this to another cell with on the same worksheet it gives me the correct formular with the correct cells changes as I want. However this formular does not work. I have auto calculate on and I manually press enter on the cells and still nothing. If I change the following for the entire formula (about 8min to do each cell) it works
I need help with creating a macro that runs when a user enters a value in the 'Numbers' column, copies and pastes data in the corresponding worksheet 'Worksheet' column by the value of 'Numbers' column data. An excel file is attached.
I'm trying to copy data from one sheet to another sheet automatically based on a number selected in a drop down control.
I have used OFFSET to pull some information successfully from a list. This is easy for me to do with single entries and a list and has worked well. I want to do similar but with a dataset not just single cells.
But, I can't seem to make OFFSET work to show a set of data easily.
Perhaps I will need VB code to do so? Or there is another control I'm not aware of? I've done very little with VB.
I'll attach a sample file to try to show better what I'm trying to do.
I have been using the following to change the year in the Header
Code: Sub Change_Format() ' Ctrl-y will change the year per individual sheet ActiveSheet.PageSetup.RightHeader = Format(Now(), "YYYY") End Sub
Is there a way to have this done automatically? There are absout 6 sheets in the workbook that have the year in the header and right now the code is in Module 3 and I have to press ctrl+y for every sheet.
How do I stop my sum formula from adding to it's range every time I type a number in? I have 12 columns of numbers by date and 4 quarter columns at the end totaling each of the 4 quarters. If I start typing directly across, the 1st quarter sum formula updates to include every number in the first 12 columns. The other quarter column sum totals stay the same.
I have 2 Excel Files. In the main file I have a macro that copy/pastes data from the secondary file. The secondary file is a daily file that gets its file name changed every day (eg. 14OCT09.xls).
The last piece of the Macro goes back to the secondary file and ends with:
Windows("14OCT09.xls").activate Range ("A1").Select
Now tomorrow, I have to manually edit the Macro and change the code to 15OCT09.xls before I run the Macro. Is there a way to automatically change this date without having to manually edit it on a daily basis?
I have a workbook, with 2 sheets. first page has graphs, second has data. in my charts I refer to a named range on the second one as follows: Data!Named_Range, where "Data" is the name of the second sheet. However when i save this, it changes the range of the chart to: '101044.xlsm'!Named_Range, where 101044 is the name of the workbook. This is a problem for me as this workbook will often be loaded into a document handling system where the file will change name, throwing out all sorts of errors because the chart path is invalid, and i have to change the range of all the charts manually. why does it have to use the file name when reffering inside the same workbook? and how do i force this to not change?
I'm designing a spreadsheet currently. I want to input a number into cell A1 - for example 13. Now the number 13 has a percentage value of 67.3%. When I enter the value into A1 I want excel to automatically fill cell A5 with the percentage value of 67.3%.
I need to have the numbers from 1-20 all with varying percentage values.
1 = 100% 2 = 97.8% 3 = 94.3% etc..
So essentially I would like to enter 13 into cell A1 and for cell A5 to automatically fill in the value of 67.3%, if I was to change the value in A1 to 10 it would also automatically change the percentage from 67.3% to 74.7%..
In my program I have data coming from an outside workbook. The amount of data coming into my program changes (Additional Rows) could be more or less. What I want is for the macro to recogize the change in data size and copy the new amount automatically. ie Change copy range. I would post the program but it is proprietary.
VBA code that would update a chart automatically as you change the inputs which are located in cells in excel. The inputs are located in cells B5:B9 and i want a code so that as you change these numbers the chart would automatically update.
As I copy and past my lookup formula down the page it is changing the lookup range which I think is what is giving me so many #N/A results. My first Formula is =IFERROR(VLOOKUP(A2,Coors2!A2:D3765,3,FALSE),IFERROR(VLOOKUP(A2,'AB2'!A2:C13944,3,FALSE),(VLOOKUP(A2 ,'WM2'!A2:C4843,3,FALSE))))
Then for instance at line 59 the formula is =IFERROR(VLOOKUP(A59,Coors2!A59:D3822,3,FALSE),IFERROR(VLOOKUP(A59,'AB2'!A59:C14001,3,FALSE),(VLOOKU P(A59,'WM2'!A59:C4900,3,FALSE))))
I have figure A1 column which total amount accounting at cells A31. I need figure 360 as a benchmark calculation perfectly been done. In this calculation 360 well off inside cells A18 although actual number is 363. If we use Conditional Formatting when had enough total in cells the achieve 360, cells colour will be transformed to red. What formula which need I used to change no matter cells on A1 to A30 if sufficient study 360 automatically cells changing colour to red
I have a worksheet with data in columns F,G,H and I. There is a total in column J. (=SUM(F1:I1)
I've written some code that allows a user to insert additional columns. However, I'm finding it difficult to find a way of changing the calculation in the total column automatically when a new column is inserted.
What i intend to do is that : (1) if i enter a value in E3, the filter should only apply using E3 value (currently its applying E3 value but if E4 is kept blank, it takes that as = " " ) . Unfortunately, i need to have the and condition, so i have to find a way in spite of this condition. Any way out ??
(2) If i enter values in A) E3 & F3 B) E3, F3, G3...then it ahould make multiple filtering possible. But when i try to apply such a condition, the same problem as in point (1) occurs, it takes the and empty criteria range as = " "
I have a list (formatted as a table) on one sheet that I want users to be able to change. On another sheet there is a table that needs to have every item from the list in the first column. So far I have achieved this by using "=Table2[[#This Row],[Crop List]]" in every cell of the column where I want the list copied. ("Table2" is the list, "Crop List" is the header on the list.) This basically works, but it has some drawbacks:
1) When I try to sort the table, the items referencing the list are stuck in their original positions and no longer match the other columns.
2) I have to have a large number of cells displaying "#VALUE!" at the bottom of my table because they refer to empty cells in the list which might later be filled.
In case my explanation wasn't clear, I've attached a copy of the workbook. Everything I'm talking about is on the first two sheets, "Lists" and "Pricing."
I would like to automatically color fill a series of rows based on like information from a single column. When the information in the column changes then the rows would either stop filling (this would be best) or fill with a different color until the information changes again.
Summary: series of alternating rows would either be filled or unfilled based on changes from the column information.
Hope this isn't too confusing. Below is an example except I would want the cells filled, not the text or numbers to change. The highlight is changing based on the changing of the numbers.
I have been working on a workbook that uses as a source information on Sheet 1.
Each item reports a number of different details from column A to column BY.
Each row is for a different item.
25 rows of information.
This is my master formula sheet, the one I've been using to create the page that reports and formulates information on a single item. The source for this sheet is taken from the cells in Sheet1!Row2.
Now that I have the sheet pretty much finished, I want to paste the same report on each succeeding page for a total of 25 sheets. I can copy Sheet2 and paste into each successive sheet, but then I need to change every single formula so that where it said AT2 it changes to AT3, where it was H2, H3, etc., from A to BY.
Problem: Can I use something that will automatically take the information for succeeding sheets and take as its source the succeeding row from the source page?
I don't know that I'm describing that sufficiently, so:
Sheet 3 would take as its source Sheet1, row 3. Sheet 4 would take as its source Sheet1, row 4. Sheet 5 would take as its source Sheet1, row 5. Sheet 6 would take as its source Sheet1, row 6.
In the past I used the find/replace function, but this sheet seems way too complicated for that. As an example, one cell alone on my master sheet is
so I would need to change S2 to S3 everywhere it appears, but there are probably more than a hundred places on the sheet that I'd have to manually change 2s to 3s, etc., for 25 sheets, which is why I'm wondering if there isn't a better way than going cell by cell, sheet by sheet.