Dynamic Average With Different Dropdown Selections
May 6, 2014
I have a worksheet that is computing the average price for an apartment rental, and I want the average to change when I de-select or select different qualities from my drop down list. For example, I want to look at buildings that allow pets and Utilities included in rent, which hides all but 4 buildings, yet the average remains the same that was calculated with the whole data table.
I know it's relatively easy to just then average that out, but I would really like to have it be dynamic for future additions and comparing many variances quickly compared to other data sheets of buildings in other areas.
View 4 Replies
ADVERTISEMENT
Mar 26, 2009
how to track selections from a dropdown menu, I have 8 selections under the dropdown that are being selected from a list. Next to the list I want to have the total of the number of times it was selected on the dropdown. I've tried the data>subtotals, but It only seems to create 0's under the dropdown box.
I dont want the totals in the dropdown box I want it next to the list of 8.
View 3 Replies
View Related
Apr 16, 2009
Below is an IF CASE VB code i was using yesterday. I am coming to a dilemma. There can be multiple columns on this one particular spreadsheet that will have different selections from the dropdown that was created. For example in column B "VIRTUAL" could be selected which will hide the rows specified in the code below, but in column C "PHYSICAL" might be selected which requires other rows to be displayed but the rows for the selection in column B need to stay displayed. I am thinking the best way to do this might be to color code cels within each column based upon selections but how can a cel be color coded based upon a specific selection from the dropdown?
View 10 Replies
View Related
Apr 13, 2007
I have been trying to put this together but am confused since I am new and this seems complex to me.
This is what I am trying to accomplish:
IE.
$F6 = 100
If $I6 is >1 AND $I7 is = 1 AND $I8 is =1 AND $I9 is =1 then $J6 =$F6
If $I6 is >1 AND $I7 >1 AND $I8 is =1 AND $I9 is =1 then $J6 =.5*$F6
If $I6 is >1 AND $I7 >1 AND $I8 >1 AND $I9 is =1 then $J6 =.33*$F6
If $I6 is >1 AND $I7 >1 AND $I8 >1 AND $I9 >1 then $J6 =.25*$F6
I am trying to divide a dollar amount equally between "Officers" if they were part of a transaction. By selecting the officers it would divide the total amount equally.
Is this even possible?
View 9 Replies
View Related
Jun 29, 2014
sample.xlsmI am trying to create a sheet with dynamic lookup based on selections.
So if a user selects planning or costing and then the state then click on search then it cell B13 it should lookup from data sheet and give full state name and in cell C13 give the document name and in D13 give the print rule.
If in the data sheet the document type says planning/costing and there is no corresponding state to that document then it should be incliuded in all searches.
When I click clear then it resets the search. So if i select Planning and state as AL then the display should be
Alabama ABC DEF
A12 AA1 (aligned to previous row)
C12 AA3 (aligned to previous row)
E12 AA5 (aligned to previous row)
Also is it a better option to do planning and costing as a radio button or drop down list. Is there a way in the state selections to show the drop down list arrow at all times. Currently when the cell is not selected it disappears.
View 10 Replies
View Related
Aug 19, 2014
I'm creating a new spreadsheet for different fines we have as a football club.
I have a table frozen at the top which looks like this:
Fine 1 Fine 2 Fine 3
Player 1
Player 2
Player 3
Then also I have a list below this with the date and specific fines:
Date Player Fine Amount
(drop down (drop down Entered manually
list of players) list of fines)
I am wanting the amount of the fine to be entered into the table at the top of the spreadsheet automatically based on the 2 drop down list entries. I would also need the table to keep adding the fines together once new entries are made.
View 1 Replies
View Related
Dec 17, 2009
Hey everyone, I'm new to the boards and only moderately familiar with Excel, so I'm looking for a little help. My question might not be completely clear, so I'll try to give you a visualization.
I want to give users the ability to choose different kinds of expenses from a drop down menu (i.e., Salary, Postage, Supplies). However, some of the expenses have general costs associated with them on top of other costs, and I want it to be made clear by having the proper costs come up with the proper expense. For example: ...
View 14 Replies
View Related
May 29, 2013
I'm trying to create a dynamic msgbox that will display what data has been updated based on checkbox selections in the userform. I've named my checkboxes as Carey, Keith, and Juliet.
Ideally if only Carey's data has been updated, I'd like the msgbox to say
' Data has been Updated for:
- Carey '
If Carey and Keith's data has been updated, I'd like the msgbox to say
'Data has been Updated for:
- Carey
- Keith '
etc.
MsgBox ("Data has been Updated for:" & vbnewline & _
If CAREY.Value =true then "- Carey" End if & vbnewline & _
If KEITH.Value =true then "- KEITH" End if & vbnewline & _
If JULIET.Value =true then "- Juliet" End if & ")
View 3 Replies
View Related
Jul 7, 2013
I am trying to take two random Mouse click selections and swap a set of ranges associated with the cells that are selected. For example if the user clicks on A1 it will resize(3,22) and store the selection as a variable to be swapped with another selection. Here is what I have so far but I keep getting a object required error on rngEmp1.
VB:
Sub SwapGroup()
If Selection.Cells.Count < 8 Then
MsgBox "Please Select two Groups to swap. Press and hold 'Ctrl' in between your selections", , "Swap Groups"
[Code] .....
View 4 Replies
View Related
Aug 22, 2013
I have a successful dropdown menu that removes items that have already been selected through the dropdown list, however, I need it to be able to handle IDENTICAL items. At the moment, it can only handle unique items.
I'm trying to create a Rota Planner. I have a selection of shifts that need to be selected for each day. Some shifts are repeated (meaning that there may be 4 members of staff on the same shift). As ONE of each of the 4 shifts are selected, I then want only 3 to be displayed in the dropdown menu to be selected, until all of them have been selected.
I've tried to break apart the code that provides dynamic dropdown list for UNIQUE values but I'm tearing my hair out and getting nowhere.
View 4 Replies
View Related
Aug 20, 2013
I have successfully used dynamic lists that remove items that have been selected from a dropdown menu already, however, is there any way dynamic lists can be set up to handle multiple identical items and then if there are say 3 identical items in the dynamic list, once 1 has been select only 2 remain in the list...?
View 1 Replies
View Related
Jul 14, 2009
Im creating a spreadsheet at work, which has a drop down box with the options of open and closed in it.
I also have a column for length of time of the claim, what i need to do, is now find a way of getting a average length of a claim, but only to see the closed option from the drop down box.
for example,
row 1
open date - 02/06, closed date - 01/07, dropdown box - closed, life - 29
row 2
open date - 10/06, closed date - n/a, dropdown box - open, life - -39400
as you can see from the example above, i cant simply do a average of the whole column, as would read the open ones as well. so is there a way of doing the formula, but telling it to only see the open, or closed ones?
View 12 Replies
View Related
Jun 25, 2014
Create a dynamic chart which is based on multiple dropdown menus. I'm trying to design a chart which shows figures per city. In the first dropdown menu you can choose a city.
The other two dropdown menus will determine the date range of the chart.
How to create this chart ....
View 2 Replies
View Related
Apr 1, 2014
I need to create a 2-stage dependent drop down list.
Stage 1:
In cell G7 (on a tab called 'Data'), I have created a drop down list based on a range name called 'Region' .
Stage 2:
In cell G8, I need to create a drop down list which is dependent on the value chosen in G7.
Problem is, I will need to create a dynamic range name here which needs to vlookup or match the value from G7 in a dynamic list of data (the data is on different tab called 'RCA Data' and is spread over columns A:E with row A for headings - the data will go down an undetermined number of rows)
Every time the value in G7 matches a value in the 'RCA data' (the potential matches are stored in column
D) I need the corresponding cell value in column C to be added to the dynamic list. This list then needs to be available to choose from a drop down list in G8.
View 1 Replies
View Related
Apr 24, 2014
I am trying to set up a spreadsheet with linked dynamic drop down lists, based on a table.Using the OFFSET function, I have managed to get this to work if the table is on the SAME sheet at the drop down lists. But I want to be able to put the drop down lists onto a different sheet, so that I can lock and hide the table.
I don't want to use the 'name based on the previous column' idea, as the table is large and will change weekly. the drop downs show all values, even duplicates, which I would like to get rid of.
View 2 Replies
View Related
Mar 11, 2013
I need the drop down menu to update when the user adds a new entry. For example, if the user decides to add companies to the financial table, no matter how many new rows they add, our drop down menu at the top will update to include the new the entries. I want this to be the case in every table. How do I do this?
View 5 Replies
View Related
Jun 5, 2014
I'm trying to incorporate multiple conditional (Dynamic?) drop down boxes to enable me to get an appropriate code at the end of the process. This will be used to product data entry and the code will tell Amazon where to post the product. I have many thousands of codes that i need to access and the easiest and most accurate way is to break down everything in to category and sub categories until I eventually get the code I want for that specific product.
for Example:
1730708031Clothing/Baby/Baby Girls 0-24m/Hoodies & Tracksuits/Tracksuit Bottoms
To return this code I would want to select Clothing, which returns a list which includes baby which in turn will give me a list that includes baby girls and so on and so on until I can select Tracksuit bottoms that will return the code.
Each list is dependent on the previous choice
As I have thousand and thousand of potential codes creating range list for each potential category and sub categories is not really feasible and would be very difficult to maintain when changes occur.
With this in mind I have created a code list that breaks the above example so that each category is now in it's own cell and there can be upto 8 (as I've seen so far) potential conditional categories before you return the code and ideally I would like to use this as it very easy to create and update. (see attached)
I might be able to use filters to return the appropriate list each time but don't know where to begin.
ClothingCodes.xlsx
View 4 Replies
View Related
Sep 29, 2011
I have a table in cells A1:B11. I have two drop down menus in cells G3 and H3. When I select red in G3 I need Bob, Sam and Sarah appear in the drop down menu in cell H3. Instead, with my current formula, only Sarah appears in the drop down in cell H3. When I select green in G3 I need Tommy, Bob, Sandy, Carl and Phil appear in the drop down menu in Cell H3. Instead with my current formula only Phil appears in the drop down in cell H3.
I linked cell H3 to the defined name Names which equals
OFFSET(INDEX(Sheet4!$B:$B, MATCH(Sheet4!$G$3, Sheet4!$A:$A,0),0),COUNTIF(Sheet4!$A:$A, Sheet4!$G$3)-1,0).
What should I add to this formula to make it work correctly?
ABCDEFGH
1RedBobRed2RedSamGreen3RedSarahBlueRedSarah4GreenTommy5GreenBob
6GreenSandy7GreenCarl8GreenPhil9BlueCarl10BlueSam11BluePhil
View 9 Replies
View Related
Nov 28, 2012
I have a workbook that has a 50 years worth of daily values for ~30 data streams. Each data stream is a tab, days are in rows with each year a new column. I want to plot selected date ranges of selected data streams from selected years on one page. So I have a tab, "QuickCharts" that has a spinner to change the year and based on that change it pulls in two dozen different data streams (reservoir information, so we're talking Inflow, Outflow, Stage, Temperature, etc at different sites). I have static plot of the entire year's data for each site. This much works fine.
I want to be able to dynamically change the plot ranges, though, with spinners. I created 12 named ranges using this type of syntax:
Code:
=OFFSET(QuickCharts!$Y$3:$AP$367,PlotStart,9,PlotStart+PlotOffset,1)
where PlotStart and PlotOffset are named cells containing a single value.
Things that work:
- I can perform operations on the named range (e.g. =Average(PR_XAxis) works fine)
- I can go to the named range dropdown in the upper left and type the range names in, and the range is selected as expected.
- The named ranges are offered as autocomplete options when typing in cell formulas.
Things that don't work:
- These named ranges don't appear in the named range dropdown list at the top left - I can type them in, but they aren't there by themselves.
- I cannot use those named ranges as series for a chart.
I tried replacing PlotStart PlotOffset with the absoilute cell references. That didn't work.
I tried scoping to worksheet instead of workbook - didn't work.
This seems to be related to this question, but the solution there isn't working for me. Selecting Chart Data Sources Using Named Ranges...
View 6 Replies
View Related
Jan 28, 2012
How do you calculate the average of the last 20 values in a dynamic list? The list is in column A and updates every day by adding a new value in column A.
View 3 Replies
View Related
Oct 13, 2009
Need formula to calculate the average %age in the attached spreadsheet. I would like to enter a score between 1 and 4, but with 1 = 10%, 2 = 25%, 3 = 80% and 4 = 100%. The score in the cell must still show as between 1 and 4 but the total must be an average of the relevant %ages. i.e. if scores are recorded as 1, 2, 3, 4, then the total average % will be (10%+25%+80%+100%)/4 = 53.75%. I'm not sure whether this should be in the Validation or in the Total cell.
View 2 Replies
View Related
May 23, 2014
I am using excel 2013
I want a data validation drop down list, the list may expand or contract.
I created the list in cells on one sheet and control T to make them into a table
In data validation I selected the range of cells in that table
When I add to the list it does not show in the drop down list.
View 6 Replies
View Related
Aug 9, 2013
I'm trying to create a set of three dynamic/dependent drop down lists of date values, based on a set of imported data. Depending on whether the preferred choice is to list all dates in a range or just dates on the 15th, the available start and end drop down lists will change.
In addition, if possible I would then like to display a list of valid dates (not sure if this needs to be VBA).
The attached sheet shows/explains what I am attempting but here it is as well:
If B3 is set to show all dates in the month then:
the first dropdown option for C3 will be the first date of IMPORT (D2)
the first dropdown option for C4 will be the C3 value, to the last date in IMPORT (D) column
If B3 is set to show 15th of the month then:
the dropdown for C3 will be the first date of IMPORT (D) column with a date of 15th the dropdown for C4 will be in the range of C3 to the last date of IMPORT (D) column with a date of 15th only dates of 15th will be listed in both C3 and C4 dropdownlists
General
the dates in IMPORT column D are taken from IMPORT column A, B & C, which will be imported and will always be date sequential the number of rows of date entries will change with every import but there will never be any blank rows between dates the values in IMPORT columns A, B & C will always be numerical, and can be referenced if required [ideally] the LIST OF DATES will be populated with the date range, based on the option selected in B3
I'm fairly familiar with Excel (2010) and I have also done some VBA but I'm new to dynamic, nested dropdown lists and I'm unsure what the most practical way is to achieve this.
View 1 Replies
View Related
Jun 9, 2014
I have a spread sheet that has three sheets, PROJECTS - TIMES - LISTS Time sheet.xlsx PROJECTS contains a list of 'In Progress' and 'completed' projects for work, with relevant other data, I.e. PROJECT No. / STATUS etc This will grow to 1,000's of rows TIMES will contain the amount of time a person spends on a PROJECT on a daily basis. This will grow to 10,000's of rows LISTS contain basic validation list for the first 2 sheets.
Part A
I would like to have a validation drop down list for the PROJECT NO column in the TIMES sheet that only lists the PROJECT NO from the PROJECTS sheet where STATUS <> COMPLETED. I.e. I only want to display the PROJECT NO's for current projects.
Part B
Even though I only want the PROJECT NO used, can the drop down list also contain other column's data for reference information only before one is selected.
View 2 Replies
View Related
Jul 18, 2012
Is it possible to set the input Range of a dropdown control to be a column from a table?
View 2 Replies
View Related
May 18, 2007
i have 2 worksheets. one with portfolio stock data, and a second that i would like to use for dynamic charting. the chart worksheet has a drop down menu that chages a refernce cell to a number corresponding to the collumn in the portfolio worksheet for the chosen ticker
i would like to make a dynamic chart that updates the data ranges based on something like this: ....
View 9 Replies
View Related
Dec 18, 2012
I have a list of named cells (i.e. Group1, Group2, Group3, etc)
I have a form control that allows the user to select which of the groups they would like to include.
I need to create a series of formulas that average the price of all the chosen groups. So if they just want to average Group1, Group3, Group5 they could do so by simply selecting the checkboxes associated with those names.
I am struggling to be able to create a formula which will look at the list of chosen values and Average only those names. If all groups were chosen this would be easy as I would simply use the:=Average(indirect(a1),indirect(a2)...and so on. However that assumes that I always know which values are being chosen. I have a fixed list of choices but if they don't choose one of the options then the indirect statement will be referencing a null value which than either returns to me a #REF or will factor in a '0' which then throws off the average.
View 3 Replies
View Related
May 12, 2007
I would like to create a shortcut to averaging ranges. The ranges vary in size so I want to be able to click on a cell. Press Ctrl + W and automatically average the cells above it. I know how to get the short cuts, I just can't figure out the proper code to be able to average based on different sizes. Let me know if you need a better explanation./
View 3 Replies
View Related
Feb 26, 2008
I use a SQL query to export a subset of data from our server. After manipulating the received data I need to Average one column that has been sorted into a number of blocks consisting of variable numbers of rows and post the result to the ajacent cell. I have tried the Countif worksheet function but am unable to resove the syntax problem.
Sub SumBlock()
Dim First_Row As Long
Dim Last_Row As Long
Dim iTotalRows As Long
Dim iCount As Long
iTotalRows = Range("A65536").End(xlUp).Row
First_Row = 2
Do While Last_Row < iTotalRows - 1
Last_Row = ActiveSheet.Range("j" & First_Row).End(xlDown).Row
iCount = Application.WorksheetFunction.CountIf(Range("J" & First_Row), ("J " & Last_Row), ">0")
ActiveSheet.Range("K" & Last_Row + 1).Formula = "=Sum(J" & First_Row & ":J" & Last_Row & ")/iCount"
First_Row = Last_Row + 2
Loop
End Sub
View 5 Replies
View Related
Apr 19, 2013
I have data that resembles (I have also attached an example workbook as well if that is easier)
Column A.................Column B................Column C..................Column D.............Column E................Column F
Year.......................Quarter...................Month..................Product-Code...........[data A]................[data B]
2013.........................Q1.........................Jan........................SD-21...................13%......................0.05%
2013.........................Q2..........................Apr........................NV-12...................7%.......................6%
etc
I am hoping to have, on another sheet, a series of dependent drop boxes- Year, Quarter, Month, SKU- which after selecting then displays 'dataA' & 'dataB'.
So you could select- List 1: 2013 ----> List 2: Q1 ----> List 3: Jan ----> SD-21.................and then 13% and 0.05% are displayed.
The data will be continuously added to and so needs to be based on a dynamic data range.
I know that a pivot table is the perfect way to do this, however my bosses have requested that I do not use that format so it is easy for all staff to access.
So I think I need to construct some sort of dashboard sheet, I have experimented with OFFSET from other posts, but so far have had no joy.
View 14 Replies
View Related
