I've written some VBA which creates worksheets to temporarily store data in. At the end of the code I delete the worksheets. However, for some reason I am getting a message box which asks for confirmation. How can I avoid the user of my report having to click OK for each of the worksheets which need to be deleted?
View 3 Replies1. I can't remember it, but I know there is a command so that the view hold and that the selected tabs and cells does not show and the same view remains until the "unhold" is called in the macro. THEN the view is updated. What is this command again? Could not find it...
2. The macro needs to delete tabs at the click of a button (easy part) but for each deletion, a message appear:
Data may exist in the sheet selected for deletion. To permanently delete this data, press Delete. Is there a way to prevent the message from popping out when the macro is executed?
I am using the before double click event on a protected sheet. When the event fires the first thing the procedure does is unprotect the sheet, does stuff and then it applies protection again at the very end.
Regardless I still get the 'Function is not available on a protected worksheet' message. How can I stop the message? Any ideas? If no standard approach is available does anyone know how I can hook this using API?
I've used the code below and it's worked to stop Update Links message, but i still need one tip to avoid continue message that shows up after Update Links massage:
Private Sub Workbook_Open()
Application.AskToUpdateLinks = False
Sheets("Feb").Activate
Range("A200:I400").Select
Selection.QueryTable.Refresh BackgroundQuery:=True
End Sub
What is the code to enable macros upon opening a workbook and avoid receiving the message "Security Warning-Macros have been disabled" in Excel 2007?
View 3 Replies View RelatedHow do I stop a text box called "Text Box 4" from being deleted. It was created from the drawing toolbar. I don't want to protect the worksheet if possible.
View 9 Replies View RelatedOn some of my worksheets, the slider bar on the right has become a small square rather than a long rectangle. This causes this slightest shift downward to jump through large amounts of rows. Excel seems to think there must be data down there I need. How do I get rid of empty cells at the bottom of a worksheet so that this no longer happens?
View 2 Replies View RelatedWhen I click a button on a Sheet, Certain data is copied from another sheet and paste in active sheet. While this action is taken place, whole sheet is refreshed and the image and a data is blinking for a second.
Do we have an option to avoid that blinking ?
I have a workbook where everything is controlled from a single worksheet that I named "Start".
In the "Start" worksheet I have instructions and one command button. When this button is clicked, it will start the VBA code. The code will basically show a couple of userforms where the user will input some information and after the user clicks on a button on the last userform, the code will generate new worksheet and present the results in that new worksheet.
The user could do this as many times as he wants, each time creating a new worksheet or overwriting in an existing worksheet (except the "Start" worksheet). The user is able to delete any worksheets he want.
I need to write a code so that if the user tries to delete the "Start" worksheet, it will not let him/her because then there is no worksheet where I have the button to click to start the VBA code.
I tried protecting the workbook, but then it does not allow to add new worksheets either.
I have a code where column K is not responding to a value being deleted out of column J. I've highlighted the portion of the code dealing with this. Deletion should trigger the worksheet_change event to clear out column K as it's supposed to. how to get deletion to take effect?
View 4 Replies View RelatedThis is part of a macro in a worksheet_change event. When a cell in column J gets deleted by a user, the corresponding cell in column K should also clear. But it's not responding to the delete.
It DOES clear when the other 2 criteria are met (.cells(1,10) = 0 and .cells(i,5) <> "Annuity"). The worksheet_change event should pick up on the cell deletion, but it's not. And column J is already a trigger for the macro to run, so I'm not sure what's going on. Either the trigger is still wrong, the isempty(.cells(i,10)) is not correct syntax, or this event just doesn't respond to cell deletion.
Is there a way to prevent formulae from losing their references when the references get replaced.
I have formula which refer to a worksheet that is dynamic, meaning that the worksheet holding the data (CONTROL_1) differs from one query to the next is imported from another source. The datasource contents and format are identical.
How I can confirm whether a particular value exists in a range. i.e.
ABCD11Yes/No22
Does the Number 4 exist in the range
A1:A8?334455667788
I have to do a project, but I'm not really sure how to go about it. Here's my problem: I have about 200 stock ticker symbols already given(ie. AAPL, MSFT, NEE, etc...), and i have to create an excel file where i would copy/paste or enter in another set of stock ticker symbols and would give me back the answer if any of the newly entered symbols match the ones i already have(either in form of 1 or 0, YES or NO etc...).
View 4 Replies View RelatedWhenever updating an Excel file and saving it as a new file, a "Confirm Save As" window appears. The default is "NO" (No is Highlighted). Conversely, in MS Word, the default is "Yes" (and, YES is highlighted). I would like to change the default from NO to YES in Excel.
View 1 Replies View RelatedI'm trying to prompt user when he tries to delete a value from a cell so he can confirm is action but not the same way to all cells.
Let's say that I have cells A1:F10 with values, and user should be able to change this values but not to delete them (can't be a blank cell) and I want to prompt him that info (something like "Cell can't be blank!").
In other range a want a different thing: let's say cells H1:K20. In this cells user should be able to change cells values and also delete them but I want to ask him for a confirmation (something like "are you sure").
pop up form within userform to confirm choice. I have a button within a userform that clears the form:
View 5 Replies View Relatedi have a macro button designed to wipe all user entered data into a workbook. I want it so you cant accidently press (as you cannot undo the operation). Anyway for making a dialog box appear asking if you are sure to wipe date, with a yes or not option.. no will obviously abort the macro.
if possible, another box to come up asking if you want to save the file first with a different file name (comes up with a save as box).
this is the code so far:
Sub MonthCleaner()
'
' MonthCleaner Macro
' Macro recorded 17/10/2005
'
Application.ScreenUpdating = False
Range("A10:G10").Select
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlDown)).Select
Selection.ClearContents
Range("H10").Select .........
I have a button. When pressed, it runs a macro. Instead, after pressing the button, I would like the user to confirm to run the macro and display some info about it. This is to make sure the user does not accidentally run the wrong macro (button). I just need a prompt box, with a line info, and the two choices YES and NO. If NO is selected, nothing happens. If YES is selected, macro continues.
View 6 Replies View RelatedI have an excel form where users can input modifications by selecting a range and then pressing a command button to input a value in the selection.
My goal is: to restrict the location where a user can select a range of cell and then execute the macro . The cells where the user can use the macro are merged and in my code, I used the address as show in the address bar in excel for their location. If the user select a cell that is not permitted, a message box is displays and exits the code.
If (Selection.Address <> Range("AE7").Address) _
Or (Selection.Address <> Range("BM7").Address) Then
Msgbox ("Wrong location") Else
For some reason it doesn't work since the message box appears even if I am within the permitted locations.
Note: AE7 is the first cell of a merge, same as with BM7
get a message box pop up upon opening of workbook no matter that tab its saved at.
View 3 Replies View RelatedI'm trying to use the following formula to verify if the "," is within a cell. Something is not right, because even for True conditions, I'm getting a False return. I think my True logical test is not written right.
View 3 Replies View RelatedI'm using Excel 2002 on and XP machine. I am creating a spreadsheet to track a work plan.
Column A: Name
Column B: Date
Column C: Time
Column D: YES
Column E: No
Column F: New Date
Column G: New Time
What I'm looking to do is input click able buttons in Columns D: Yes and Column E: No.
When a user clicks on YES, a pop up window should appear with the data in columns A,B,C.
The p0p-up should contain CONFIRM and CANCEL buttons.
Asking the user if they want to confirm the date and Time.
If CONFIRM is clicked Excel should then send an email to me and the user to say that the work schedule has been confirmed.
If CANCEL is clicked the pop-up window closes.
Secondly if the user clicks NO, a pop-up window should open with two free text boxes. One for Proposed date and One for Proposed time. And again 2 buttons for Confirm and Cancel.
If Confirm is clicked then Excel should record the data entered in the free text boxes into Column G and Column H and send emails to me and the user with the Proposed date and Time Data.
If CANCEL is clicked the pop-up window closes.
I have been browsing the web trying to find a worksheet event that will automatically open a message box if the user tries to delete the sheet. Is this possible??
PS I do not want them to delete the sheet, so perhaps a message box with a a cancel button
How do you generate an error message that states "You are not authorized to delete this worksheet" any time a user attempts to delete the specified worksheet? This message also has to block the user for deleting the worksheet.
View 6 Replies View RelatedI wish to send a message when a worksheet is manually opened, but not when it is activated from within VBA.
The following code does not work, and I am open to suggestions
Private Sub Worksheet_Open() ....
I'm trying to add a message box that will appear when you activate a worksheet in a workbook. This is what I have, but it's not working.
Private Sub Workbook_SheetActivate(ByVal Sh As Object)
If Sh. Name = "P2 Forecast" Then
MsgBox "Ensure you have locked your forecast on the Sales Forecast Tab prior to working your P2s"
Else
End If
End Sub
I am trying to do a macro that looks to see if the date is different from one cell to another going down in rows. I got it to work until the cell is empty then it says the date dont match but I just want it to stop the loop. so it should go down a list check to see if the date is the same all the way down the list, stopping if cell is blank, if not give a message box, if it is the same stop.
Is As follows
Dim rowNum As Integer, colNum As Integer, currCell As Range
rowNum = ActiveCell.Row
colNum = ActiveCell.Column
rowNum = rowNum + 1
'get first cell
Set currCell = ActiveSheet.Cells(2, 3)
'loop while cell not empty
Do Until currCell.Value = " "
If currCell.Value = ActiveSheet.Cells(2, 3) Then
If currCell.Value = "" Then
End If
How to show via a message box the difference between rows 2 and 3 on a worksheet (row 1 is headers).
In the message box per the attached workbook, i should only see something like the following....
Drawing Rev was A is now B
Planner was Joe is now Fred
The attached example is abbreviated, the actual data will span multiple columns (approx. 30 - 40)
I'm using the code below to form part of staff resource spreadsheet, but I'm having a little difficulty with a piece of the script.
Code:
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rInt As Range, res As Variant
Dim cell As Range
Sheets("Input").Protect "password", UserInterFaceOnly:=True, AllowFiltering:=True
[Code] ....
The piece of the script which I'm having difficulty with is this:
Code:
For Each cell In Range("B7:B400")
If cell.Value = "No" Then
MsgBox "If " & cell.Offset(0, 1).Value & " has left R&D, please remember to delete any future resource forecasts"
End If
Next
When the cell value has changed to 'No' the pop up message appears, but for some strange reason the message is shown 5 times, despite their being only one record.The other problem I have is if I add another record and change the value to 'No' in column B, the message is shown twice, once for the previous record and the second for the new.