I have a workbook where everything is controlled from a single worksheet that I named "Start".
In the "Start" worksheet I have instructions and one command button. When this button is clicked, it will start the VBA code. The code will basically show a couple of userforms where the user will input some information and after the user clicks on a button on the last userform, the code will generate new worksheet and present the results in that new worksheet.
The user could do this as many times as he wants, each time creating a new worksheet or overwriting in an existing worksheet (except the "Start" worksheet). The user is able to delete any worksheets he want.
I need to write a code so that if the user tries to delete the "Start" worksheet, it will not let him/her because then there is no worksheet where I have the button to click to start the VBA code.
I tried protecting the workbook, but then it does not allow to add new worksheets either.
i need to create a macro that will delete entire rows based on certain criteria. here is an example of some of the worksheet:
US0017651060AMR_CORP CM 12C US0017658669AMR_CORP PR 8C
US00211H1077ATC_ONLANE_INC CM 92M US00211H2067ATC_ONLANE_INC PR 100N
US0038813079ACACIA_RESH CM 12C US0038812089ACACIA_RESH CM 16C
CA00440P2017ACE_AVIATION CM 7C CA00440P1027ACE_AVIATION CM 7C US00440P3001ACE_AVIATION CM 100S
CA00756J1049ADVANTEX_MARK CM 43C CA00756J3029ADVANTEX_MARK PR 100N
i want to create a macro that, when searching the third column of data (containing "CM" and "PR"), if a group of rows (between blank rows) do not contain at least one "PR", delete entire group of rows.
Therefore, the rows with "ACACIA_RESH" and "ACE_AVIATION" would be deleted from the worksheet.
whenever you want to delete a sheet, excel would prompt you to ask you if you are sure you want to delete the sheet. im making a vba so that the sheets will delete upon workbook close, but i dont want to be prompted everytime to be sure to delete it when running the vba macro. Also, i would like to avoid being asked to save any changes to my workbook
I have a macro which is copying data from several worksheets into one consolidation worksheet. When determining where to paste the data into the consolidation sheet, the macro includes some logic to find the last row that has data in it (using e.Range("A65536").End(xlUp).Row, where "e" is a variable holding the name of the consolidation worksheet).
Once all the data is on the consolidation worksheet, I have a second worksheet with formulas that link to the consolidation sheet. The issue I have is that the first step of my consolidation macro deletes all data on the consolidation sheet to ensure that no data is double-counted). I am deleting the data with logic that simply deletes all rows from 3 to 65536. Once these rows are deleted, Excel returns a #REF! error on my second worksheet which is linking back to this data.
Rather than deleting the rows on the consolidation sheet, I have tried using the Clear and/or ClearContents commands instead. This works (i.e., my formulas no longer error out), but results in the consolidation macro running very slowly (~15 minutes, compared to
When I click a button on a Sheet, Certain data is copied from another sheet and paste in active sheet. While this action is taken place, whole sheet is refreshed and the image and a data is blinking for a second.
Is there a way to prevent formulae from losing their references when the references get replaced.
I have formula which refer to a worksheet that is dynamic, meaning that the worksheet holding the data (CONTROL_1) differs from one query to the next is imported from another source. The datasource contents and format are identical.
I am using the before double click event on a protected sheet. When the event fires the first thing the procedure does is unprotect the sheet, does stuff and then it applies protection again at the very end.
Regardless I still get the 'Function is not available on a protected worksheet' message. How can I stop the message? Any ideas? If no standard approach is available does anyone know how I can hook this using API?
I've written some VBA which creates worksheets to temporarily store data in. At the end of the code I delete the worksheets. However, for some reason I am getting a message box which asks for confirmation. How can I avoid the user of my report having to click OK for each of the worksheets which need to be deleted?
I have created a worksheet (through an import into MS Excel 2007) which contains 287,281 rows. However, the data I need is located in rows: 4, 67, 130, ... (or n+63) rows.
I've been tasked with developing a macro that will generate schedules. For background, we're taking a QuickBooks Customer file and exporting it to be picked up by the macro. I've got that part working, but now I need to delete various rows based on certain criteria.
The spreadsheet has a field for Job Status which we use to define whether an account is under contract (2 in QuickBooks), or some other status. Basically what I need to do is delete the entire row of data where JobStatus (Column R) is anything but 2.
I want to delete some rows that are identical. Aside from creating a macros to do this, is there a way to find a row with a specific criteria and delete it if value returns TRUE?
I was wondering if there is a formula or command to find and delet specific rows. I want to remove people from an excel email list.
On Sheet 1, I have 500 rows with columns for first name, last name, and email. On Sheet 2, I have 30 rows with columns for first name, last name, and email that appear on Sheet 1 but need to be removed.
Is there a way to do this without manually searching for each email and then deleting the row?
I have a excel file with more then 10 sheets..Some of the sheets contains this word in some random cells" #DIV/0! " I want a macro which can find it in every sheet except parent sheet and can remove it.
I am trying to write a VBA code in excel to delete any columns when a cell in that particular column = 0 (zero). That cell would start at B19 and subsequently follow to C19, D19 and so on.
I have a complex report with thousands of lines I am trying to clean up. In order to do this, I need VBA that recognizes specific text data starting after row 9. When it sees this, it will need to select and delete the 2 rows above it, the row it is in, and the 6 rows below it. 9 rows in total, some of which are blank. The text will repeat every 47-50 rows, but I cannot say exactly when it will repeat again. When it is repeated, I need the 9 rows deleted. At this time, there is only 1 column in the report because I need to split out the data in the cell into adjoining cells. Since I have not solved that yet, I need to just delete the entire row.
The text is written with spaces between each letter and a double space between words. It reads, "B I L L I N G M A S T E R I N V O I C E S E T U P L I S T I N G"
I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code: Sub Results2() ' Results2 Macro ' copy table filter power by greater than and less than Sheets("Finalizing Results 2").Select Cells.Select
code: Public Ctl As CommandBarControl Sub DelSht() Set Ctl = Application.CommandBars.FindControl(ID:=847) Ctl.OnAction = "MyDelSht" End Sub Sub ResSht() Set Ctl = Application.CommandBars.FindControl(ID:=847) Ctl.OnAction = "" End Sub
I have a macro that imports a text file. I then have summary sheets that reference to the sheets with the imported text file details. This is a task I complete every month.
The next month I delete the sheets with the imported text file details before importing current month's details. But when I do that it screws up my references.
Here's an example of a reference with previous months' imported text file details:
= SUM('X'!$I$1:$I$3000)/2+SUM('Y'!$I$1:$I$3000)/2
When I delete the sheets with the imported text file details and import current month's details, my reference suddenly looks like this:
I have been browsing the web trying to find a worksheet event that will automatically open a message box if the user tries to delete the sheet. Is this possible??
PS I do not want them to delete the sheet, so perhaps a message box with a a cancel button
How do you generate an error message that states "You are not authorized to delete this worksheet" any time a user attempts to delete the specified worksheet? This message also has to block the user for deleting the worksheet.
How can i delete a range of cell in another worksheet 2? for example, i have a data in B1:F1 in sheet 2 and i want to put a button in sheet 1 which will delete the data in B1:F1 in sheet 2.
I am trying to create two macros. The first macro will add a button, and the second macro will delete the button. I am noticing that when I add the button in the first macro, Excel is automatically naming the button (i.e. Button 26), and then when I try to delete the button with the second macro, this button name is not recognized. How can I name or set the button as a variable so that I can successfully run these two macros?
how to find a certain criteria and delete the entire row that the criteria is in. I am more interested in finding certain criteria with vba, in my case any text/non numerical values and clear contents from that cell for the entire worksheet while retaining the rest of the cells that have numerical values in them. My data has --- in cells that represents missing data which would be easier if it was completely blank.
we have a recorded to delete a sheet, then how to make sure the interactive box doesnt come up asking you to "delete" or "cancel"? And the sheets still get deleted?
Here's my Sheets("regress").Select ActiveSheet.Delete
How to make sure that the "Delete/Cancel" box doesnt appear?
What I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. ‘Description of Project’, ‘WBS Code’, ‘Rate’, ‘Employee Name’, ‘Premium’, ‘Invoice’, ‘Status’, ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ from Worksheet (from Sheet 1 to Sheet 2)
The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.
In additional the columns ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ are total columns so when they are copied from ‘Sheet 1’ to ‘Sheet 2’ their values should be copied as opposed to the formulas
I have a Productivity Report that contains very basic formulas that provide totals for 4 columns (B6:E6) and an average for one column (F). I have included two command buttons, one to add a new row and the other to delete a row.
I need to be able to add or delete rows depending on how many employees' productivity I will be tracking on any given week; each row represents a separate employee. I need the following functionality out of my form:
1) formula in column F needs to copy and paste with each new line 2) when a new line is copied and pasted I need the contents to be cleared 3) I need the user to be blocked from deleting the first row (3 on this form) in the table
The code I'm using for my "Add" button is:
[Code].....
The code I'm using for my "Delete" button is:
[Code] ..... The buttons add and delete rows as I'd like them to but content is not clearing, with each row added the contents provide a sub total. I've tried various lines of code (some more complicated and some less) before I recorded my own macro (see above).
