hey everyone
i'm using a table like this one :
A B C D
1 Main | value | value | value
2 Extra | value | value | value
3 Main | value | value | value
.
.
n Extra | value | value | value
i want to delete every cell in column "D" only when cell in column "A" contains "Extra" value.
Here's my problem. I have the following table:
View 5 Replies View RelatedI have created a worksheet (through an import into MS Excel 2007) which contains 287,281 rows. However, the data I need is located in rows: 4, 67, 130, ... (or n+63) rows.
View 10 Replies View RelatedI have Column A with 380 cells filled in with numbers (A1-A380) i.e. numbers like..456758, 567848 etc etc
Column B has a subset of those numbers, maybe 80-90 or so (B1-B90).
What I want to do is either highlight the numbers in Column A that also appear in Column B in yellow, OR delete them from Column A altogether
I've been tasked with developing a macro that will generate schedules. For background, we're taking a QuickBooks Customer file and exporting it to be picked up by the macro. I've got that part working, but now I need to delete various rows based on certain criteria.
The spreadsheet has a field for Job Status which we use to define whether an account is under contract (2 in QuickBooks), or some other status. Basically what I need to do is delete the entire row of data where JobStatus (Column R) is anything but 2.
I want to delete some rows that are identical. Aside from creating a macros to do this, is there a way to find a row with a specific criteria and delete it if value returns TRUE?
View 1 Replies View RelatedI was wondering if there is a formula or command to find and delet specific rows. I want to remove people from an excel email list.
On Sheet 1, I have 500 rows with columns for first name, last name, and email.
On Sheet 2, I have 30 rows with columns for first name, last name, and email that appear on Sheet 1 but need to be removed.
Is there a way to do this without manually searching for each email and then deleting the row?
macro that would keep all lines containing a number greater than zero in column D and delete all of the other lines?
View 9 Replies View Relatedi need to create a macro that will delete entire rows based on certain criteria. here is an example of some of the worksheet:
US0017651060AMR_CORP CM 12C
US0017658669AMR_CORP PR 8C
US00211H1077ATC_ONLANE_INC CM 92M
US00211H2067ATC_ONLANE_INC PR 100N
US0038813079ACACIA_RESH CM 12C
US0038812089ACACIA_RESH CM 16C
CA00440P2017ACE_AVIATION CM 7C
CA00440P1027ACE_AVIATION CM 7C
US00440P3001ACE_AVIATION CM 100S
CA00756J1049ADVANTEX_MARK CM 43C
CA00756J3029ADVANTEX_MARK PR 100N
i want to create a macro that, when searching the third column of data (containing "CM" and "PR"), if a group of rows (between blank rows) do not contain at least one "PR", delete entire group of rows.
Therefore, the rows with "ACACIA_RESH" and "ACE_AVIATION" would be deleted from the worksheet.
I have a workbook where everything is controlled from a single worksheet that I named "Start".
In the "Start" worksheet I have instructions and one command button. When this button is clicked, it will start the VBA code. The code will basically show a couple of userforms where the user will input some information and after the user clicks on a button on the last userform, the code will generate new worksheet and present the results in that new worksheet.
The user could do this as many times as he wants, each time creating a new worksheet or overwriting in an existing worksheet (except the "Start" worksheet). The user is able to delete any worksheets he want.
I need to write a code so that if the user tries to delete the "Start" worksheet, it will not let him/her because then there is no worksheet where I have the button to click to start the VBA code.
I tried protecting the workbook, but then it does not allow to add new worksheets either.
I have a excel file with more then 10 sheets..Some of the sheets contains this word in some random cells" #DIV/0! " I want a macro which can find it in every sheet except parent sheet and can remove it.
View 5 Replies View RelatedI am trying to write a VBA code in excel to delete any columns when a cell in that particular column = 0 (zero). That cell would start at B19 and subsequently follow to C19, D19 and so on.
View 9 Replies View RelatedI have a complex report with thousands of lines I am trying to clean up. In order to do this, I need VBA that recognizes specific text data starting after row 9. When it sees this, it will need to select and delete the 2 rows above it, the row it is in, and the 6 rows below it. 9 rows in total, some of which are blank. The text will repeat every 47-50 rows, but I cannot say exactly when it will repeat again. When it is repeated, I need the 9 rows deleted. At this time, there is only 1 column in the report because I need to split out the data in the cell into adjoining cells. Since I have not solved that yet, I need to just delete the entire row.
The text is written with spaces between each letter and a double space between words. It reads, "B I L L I N G M A S T E R I N V O I C E S E T U P L I S T I N G"
I have number in cell (A1) = 100. when I enter number in any cell of column(B) for example (B1)=10. then in cell (C1) the result of (A1) - (B1) = (90) and if I add in cell (B2)=10 then in cell (C1) the result of (A1) - (B1+B2) = 80 .accumulatively in cell (C1). and any number in column (B), the result will be (A1) minus any number in column(B) accumulated in (C1)
second question
I have number in cell (A1) = 100. when I enter number at cell (B1) = 10 then the result would be in the adjacent cell (C1) = (A1) - ( B1) = 90 and If I enter a new number in cell (B2) = 10 then the result would be in the adjacent cell (C2) = (A1) - (B1+B2) = 80 and If I enter a new number in cell (B3) = 10 then the result would be in the adjacent cell (C3) = (A1) - (B1+B2+B3) = 70 and so on. I want the result to be add automatically to adjacent cell in column (C)
I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code:
Sub Results2()
' Results2 Macro
' copy table filter power by greater than and less than
Sheets("Finalizing Results 2").Select
Cells.Select
[Code] .......
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select
Is there a way to format cells to where - when you type in a certain person's first name, it will insert something entirely different?
This has seemed to have happened on a computer at work.
In Excel, when I type in "Martha" then tab, or otherwise leave that cell, Martha changes to "Cool"
If I type in anyone elses name - it stays that name. But if I type in "Martha" .. it changes to "Cool" with the bullet and the word Cool.
Looking to have a macro call a subroutine every time it finds a cell meeting specific criteria.
Code in plain english would look like this:
For EACH cell in range A1:BZ500 meeting the following criteria:
Cell value is a date
AND
Cell's date is at least a week or more in the future
AND
Cell background (Fill) = RGB color code: (R:191 G:191 B:191)
DO the following:
Call repeatingsub
I'm trying to search through multiple worksheets (that are closed) to see if a value in cell B12 (of every worksheet) matches a value in a seperate worksheet (which is in a seperate workbook)
View 14 Replies View RelatedI have a sheet that I fill out with customer data then print and start over with the next customer. This requires me to tab and delete through the sheet before starting the next entry and I am wondering if there is some way to auto clear the unlocked cells based on a single entry IE when we entered new data in the 1st field this would clear the unlocked cells and make them ready for new data?
View 14 Replies View RelatedIn Excel 2007, when I delete a row/cell, text is associated with deleting row/cell but some lines, polygon ... can not associate with deleting row/cell . So the lines, polygon ... in mistake location.
View 12 Replies View RelatedI am using this code to populate column J with a date when yes is selected in colum I.
Private Sub Worksheet_Change(ByVal Target As Range)
With Target
If .Column = Columns("I").Column Then
If .Value = "Yes" And IsEmpty(.Offset(, 1)) Then .Offset(, 1) = Date
End If
End With
End Sub
However i also want any value entered in J to be deleted when No is selected.
My original datasheet had two separate columns, First Name & Last Name. I've combined the two columns into one so it appears Last Name, First Name. Some of the names have middle names. Is there anyway to delete the middle name.
Example: Cope, David Simon
Trying to get: Cope, David
I am using Excel on a work computer that someone else may have changed the settings on.
I want to simply delete a cell, without deleting the entire row the cell belongs to. Yet when I highlight the cell, and go to Edit -> Delete, the program asks me if I want to delete the entire row, and only gives me two options: OK or Cancel. So I can't delete just one cell (and have all of the lower cells shift up one).
When I right click, the 'delete' option is not present either. I tried changing the menu properties to add the 'delete' function, but it will not delete a cell without taking out the whole row.
I have a lot of calculations going on so I thought I would name some of the cells where factors come from to make it easier to follow.
I made a typo and named a cell wrong, is there a way to delete it? Right now I have a correct and incorrect name attached to the cell.
I want to delete columns that contain a 0 value in row 2 of the column.
In my case, I have headers in row 1 and values in rows 2 and below. I eventually want to filter out the columns that contain no values below the headers.
Let me know if you need any more information for clarification.
I was wondering if ther is a way to delete what is in one cell, once something has been enterted in another?
Example A1 has In-progress written in the cell.
Once B1 has Completed.
So once B1 has been entered, the info in cell A1 will be deleted.
Creating macros in excel. I am looking for a way to delete a row at the active cell. So far this code does the job for me:
Code:
Sub slet()
ActiveSheet.Unprotect
ActiveCell.EntireRow.Delete
ActiveSheet.Protect DrawingObjects:=True, Contents:=True, Scenarios:=True _
, AllowFormattingCells:=True
End Sub
But I want to make it impossible to use this code on the first 4 rows.
I'm looking to do a search and delete in Excel 2007 and I'm having a great deal of difficulty trying to do this. I've attempted to modify some code I found on the internet and not having very good luck with it. Here is the scenario, I've got a spreadsheet with 5 columns (A to E). In column C, there is a product name with certain identifiers that set it apart. An example of this product name with identifier is "product XXX_type 2_attribute ". I want to search for "type 2" in Column C of each row and then delete the row.
Here is what I have written so far and I'm not having any luck.
Sub RowDel()
Dim cell As Range
For Each cell In Range(Range("c4"), _
Range("c65536").End(xlUp))
If cell = "_GPnl_" Then
Range(cell, _
Cells(Rows.Count, 1)).EntireRow.Delete
Exit For
End If
Next cell
End Sub
I want to delete part of a cell in Excel. For example if a cell had the data "BlueGreen" how would I delete the "Blue" bit just to leave the "Green" bit behind? Surely there is an easier way then physically deleting the first part in each cell? I have about 4000 cells to work on!
View 9 Replies View Related
