I need a before save event macro in excel that will check if sheet1 cell ref A25 = zero. If it isnt zero I want a msgbox to say "Does Not Equal Zero" to pop up, if it is zero then I do not want a msgbox displayed. In both instances I still want the file to be saved.
View 5 Replies
I need my macro to run when the spreadsheet is Saved. Is that process written in the macro code or is there an existing event control in Excel to accomplish this?
Running Excel 2007. I tried searching the forum & found one post that ran the macro on open, but couldn't set that up to work on save.
I want to execute as the user saves the workbook. I want to unhide the rows that may have been hidden during use, on the save. I would prefer it to just happen with no interaction with the user. They save the the book and without them even knowing the rows are unhidden and the file saves. The code it self works as I want it to, I added to a command button with no problems as soon as I add it to the before save in the Thisworkbook it will not even work even if I just try to step in.
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
Application.ScreenUpdating = False
Application.EnableEvents = False
Application.Calculation = xlCalculationManual
Worksheets("Prelims").Range("A11:A511").EntireRow.Hidden = False
Worksheets("Elecs").Range("A11:A1261").EntireRow.Hidden = False
Worksheets("Civils").Range("A11:A5011").EntireRow.Hidden = False
Application.EnableEvents = True
Application.ScreenUpdating = True
Application.Calculation = xlCalculationAutomatic
Worksheets("Civils").Select
End Sub
Here is my existing code...
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
Application. ScreenUpdating=False
' Cancel user prompted save procedure
Cancel = True
' Code removed... changes some values and settings before saving
ThisWorkbook.Save
' Code removed... return the original values and settings
Application.ScreenUpdating=True
End Sub
For some reason, the workbook is not being saved when the above code is executed. It seems the problem lies with "ThisWorkbook.Save"... in that it just isn't saving! If I delete "Cancel=True", the workbook will save (obviously!).
I have spent an hour trying to work this out and have come to the conclusion that it is something other than my code... has anyone experienced this problem before?
I need to use the BeforeClose event to save the workbook with the same name when a user closes it. (82 users and they all seem to want to give it their own name.) I have the following code in the BeforeClose event but would like to eliminate the prompt "this file already exists, do you want to replace it" I have tried using the Application.DisplayAlerts = False but this seems to stop the workbook from saving.
I have a public demention called wbName and is set to the workbook name in an outo open macro
Public wbName
Public Sub auto_open()
wbName = ActiveWorkbook.Name
UserForm2.Show
MsgBox "PLEASE do Not insert rows/columns or enter calculations" _
& Chr(10) & " " _
& Chr(10) & "Enter Only Account Name, Date, and Corresponding_ Calls/Details", vbCritical, "Caution"
End Sub
I have a command button code on a sheet that checks if all the cells in a table have been completed before saving the worksheet. If they're not all complete a userform message box pops up with a reminder then returns to the sheet without saving. I want to be able to call this from the 'BeforeClose' event as well however, even though it still does what it's supposed to do, after the userform message box has displayed and been unloaded then it still pops up the Save Dialog box.
I'm struggling to suppress the Save Dialog box and return to the sheet.
I have many worksheets in a workbook that need to be saved if a user changesanything on them.
These sheet names all end in "....SD" and the code needs to only run on those sheets. I have learned alot from the forum but not enough, just yet . . This is what I have so far:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim sht As Object
For Each sht In ThisWorkbook.Sheets
If LCase(Right(ws.Name, 2)) = "sd" Then
MsgBox(Prompt:="You must save changes. Save now?", Buttons:=vbYesNo) = vbYes Then ThisWorkbook.Save
End Sub
It doesn't like the 2 "Then's". (Don't laugh - I'm trying.)
In the situation where I shut down my model (i.e. not just press Ctrl+S, but shut it down), the following code saves the model twice. I only want it to save once. I really can't see why it saves a second time.
NB: I know if you set Cancel to True in the BeforeSave event, it should prevent the model from saving after the event, but even when set to true in the below code, it still saves...
Private Sub Workbook_BeforeClose(Cancel As Boolean)
bIsClosing = True 'Given we shut model, this public bIsClosing is set to true...
End Sub
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
Dim wsArray() As Variant
Dim iCnt As Integer
Dim wsSht As Worksheet
Application. ScreenUpdating = 0
Splash.Visible = True 'Splash is codename for warning spreadsheet, this is left
'visible while all other sheets are to be hidden.......................
I'm trying to make a macro check if a file has been saved (ever). If so I want the macro to do a regular save (with already esatablished filename and location) before it proceeds with the rest of the macro. If the file hasnt been saved (if it runs from a new workbook) then I want it to pop up the save.as dialog, so that the user can choose the name and location of the file before the macro continues .
The macro itself is saved in personal.xlsx.
I'm trying to have a macro that opens the save as window, places the name in cell f5 and then allows you to save the workbook with cell f5 as the filename. I have managed to get the save as window to come up and the cell f5 as the name, but when I press save is doesn't. Here is what I have (also, is there a way to direct this to a specific folder).
View 4 Replies View RelatedI have a macro that copy one sheet of the Active workbook and sends it via email.
I need to add a code in this sheet so when one opens it from the email, with a command button to be able to save the file to specific, fixed folder on the local network with it’s original file name.
My spreadsheet has 32 worksheets, I've recorded a macro to do the job "save, save as with specific name", but what I want is, when save as, I wanted the file name increase in one number, and the date in a specific range "H8:J8" the date should be the next saturday.
here is part of the code.
Range("D11:J65").Select
Selection.ClearContents
Range("J44").Select
Sheets("NsFri").Select
ActiveWindow.SmallScroll Down:=-12
Range("A12:A21,D12:I21").Select
on this example I want the file saved as "PrA4W05.xls", being the next week "PrA4W06.xls", and so on.
and on "H8:J8" the next saturday.
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies View RelatedI am trying to create a macro to run from a form button, within a report, to save a file to a variable file path and name depending on the date value in cell B5.
The format of B5 looks like - 13/08/2014 16:39
The file path has folders for each year in format "yyyy" with each year having sub folders for each month in format "mm".
The file name is just the date only and is formatted "dd.mm.yy" e.g. 13.08.14
I have tried the code below in various permutations but always end up with an error - Method 'SaveAs' of object '_Workbook' failed.
[Code] ......
I have a situation where I have a macro that sorts on sheet1. I would like it to run when a cell changes on sheet2 in E9:N21. Since the cells on sheet1 are linked to data on sheet2, I cannot trigger the macro from sheet1 due to the cells being formulas instead of values.
Here is what I have tried and it is not working. I must be doing something wrong with the syntax.
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range(Sheets("Games")("E9:N21"))) Is Nothing Then
Exit Sub
Else
ActiveWindow.SmallScroll Down:=33
Rows("6:55").Select
Range("A55").Activate
Selection.Sort Key1:=Range("A55"), Order1:=xlDescending, Header:=xlGuess _
, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Range("A3").Select
End If
End Sub
The macro below works great as a conditional format routine on the Input sheet of the workbook, however I would like it to run on the Data sheet as well, but with a different range (E3:CE117). Can this be done?
Private Sub Worksheet_Calculate()
Dim dcell As Range
Dim icolour As Integer
For Each dcell In Range("c15:g27")
Select Case dcell.Value
Case "GA"
icolor = 43
Case "GAC"
icolor = 4
Case "LA"
icolor = 45.....................
i currently have a workbbok that i have a very simple worksheet event macro that will filter a seperate sheets contents to the corresponding entry number. is there any way to make a dynamic event macro that will filter my second sheet depending on what cell is selceted on the first.
for example record 1 on sheet 1. if cell L1 is selected it will filter sheet 2 to to record 1, record 2 on sheet 1, if cell L2 is selected it will filter sheet 2 record 2 and so on. this list of records will continue to grow and i cant think of any way other than what i currently have, which is to make each filter macro for every cell.
is ther a better way example of CODE HERE
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
If Target.Address = "$L$5" Then
Call Filter1
[Code]....
with an event macro. Basically I have a workbook with 11 worksheets and have created a macro that increases the value of cell J3 by 1 in Sheet1. However at present it only works from Sheet5, but I now need it to run from Sheet6 and Sheet11 as well and not from any other worksheets. The code I have is as follows
Private Sub Workbook_BeforePrint(Cancel As Boolean)
If ActiveSheet.CodeName = "Sheet5" Then
With Sheet1
.Range("J3").Value = .Range("J3").Value + 1
End With
End If
End Sub
Does anyone no a way to trigger a macro by just using the enter key in a difined rage ("A1:A100") Not worksheetchange
View 9 Replies View RelatedI have a worksheet called "Roster" with a list of names from D7:D17 each person on the list has a separate sheet that is called by their name. the sheets are not linked up. the names were just manually typed into the list and into each sheet name.
If any name is changed on the list on "Roster!D7:D17" i would like the sheet that has that name to change as well.
This is the code that i was sent, but i do not know enough about VBA code to understand exactly what is happening, thus i cannot diagnose the problem. I placed the following code into the page "Roster" (by right-clicking and then pasting the code) then i closed, but nothing happens. I can mess with the code and get an error message. but that is about it. error messages usually say something about the debugger, or runtime error or something.
there is the
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
OldVal(0) = OldVal(1)
OldVal(1) = Target(1).Value
End Sub
how to make a code so that it captures the event of pressing any key of the keyboard and triggers a macro.
I tried using OnKey method but the problem with this is I am getting stick to any particular button whichever i specify in the onkey method wheareas I want to keep it general for any button in the keyboard.
Also if anyone can suggest how can I use OnKey method to use the "S" key to launch a macro.
I'm using a macro that picks up on changes in a active cell.. This is the code
HTML Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If Not Application.Intersect(Target, Range("A:A")) Is Nothing Then
If Target.Value <> "" Then
ThisWorkbook.Sheets("Log").Cells(Target.Row, 2).Formula = "=Today()"
End If
End If
End Sub
There's a problem with this code, when select from a range and hit delete, i get a error mismatch. I want to have the macro ignore when i select active cell range of greater then 1.
I have not used an event macro before and am trying to one update a cell when changing a cell. I am basically copying a number to another cell that is an input for a calculation and then returning the calculated value back. How do I reference r69 in the code to start the event macro?
View 2 Replies View RelatedIn Col D of my spreadsheet, I have a list of security codes, in this list there is a security code "all", i need a macro that will add 1 to the code, so it reads "all1", now i need the macro to run as soon as new data is pasted to sheet "Lending", the ranges in Col D do change on a daily basis therefore cell reference for security codes is not fixed.
Can this be achieved? ............
I'd like to know if there is a change event that only occurs when a target cell is changed by the user, but does not occur when i'ts changed by a macro. nfortunately, the Worksheet_Change event occurs in both cases.
View 2 Replies View RelatedI have a real simple question about what command to enter in order to stop a macro. All the macro does is "press the F9 key" every second. I use a button to start the loop but I am unable to find a way to use another button to stop the process. Ive copied my macro below:
Sub Go()
Calculate
Application .OnTime Now + TimeValue("00:00:01"), "Go"
End Sub
Private Sub CommandButton1_Click() "Go Button"
Application.OnTime Now + TimeValue("00:00:01"), "Go"
End Sub
Private Sub CommandButton2_Click() "Stop Button"
'????????????????????????
End Sub
One of the things it does throughout the course of the run is unprotect the worksheet, do what it needs to and then reprotects the sheet (using a password). On the second run, the sheet protection input box is shown and I am required to input the password before the code will execute.
The code that I have written uses an Add-in that pulls data from a database. As part of that retrieval, the other add-in protects the sheet without a password. Would that be causing my error?
I have looked at a series of Change Event topics and code but can't see what I need. I simply want a macro to run automatically when a cell ....which contains the Maximum time from a range.... changes. I assume I use .... Private Sub Worksheet_Change(ByVal Target As Excel.Range) ...but I have no idea what code to use...
View 4 Replies View RelatedI have the following code, which works perfectly:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim TotalDays As Integer
TotalDays = Range("C65536").End(xlUp).Row + 1
The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.
However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.
How do I add the following, to my previous code?
Range("E8").Value = Cells(7, 6) * 2.5
how I would create an event macro that will synchronise the zoom % of 2 sheets?
E.g. if I change the zoom on sheet1 to 80% then sheet2 automatically change to the same? And the same the other way round...?
