I have a ComboBox on a UserForm which is populated with data from a spreadsheet. When I run the program I always get a blank line at the top. Once I select an item from the drop down list the blank line goes away. Is there any way to get the ComboBox to initially display the first item of my list, i.e. no blank line.
View 2 Replies
Creating a macro that will identify the last blank line in column J and insert a line in it? The macro will need to look from the "bottom" as there is blanks cells above the last line.
View 5 Replies View RelatedAm currently working on a sheet (Attached), which is attempting to take data input in a sheet (PnL tab), and work them into manageable data on the Frontsheet, via the seperate F&O and Equities tabs.
Now, in the Equities section of the frontsheet, my array formula to pull through the data from the Equities sheet is bringing up an erroneous blank line, despite the forumal being told to ignore blanks.
As far as I can tell, this is referencing formulated tabs, and how to stop this from happening.
I am trying to stack the values of a chart into a single column.So my data looks like this:
-------A--------B
1 Value1 Value2
2 Value3
3 Value4
4 Value5 Value6
5 Value7
If cell 1B does not = 0 I want to add a line between line 1 and 2 (I'll call that line "11") and take Value2 and paste it into 11A If cell 1B is blank I want it to do nothing
So I want my data to look like this:
---------A
1....Value1
11..Value2
2....Value3
3....Value4
4....Value5
41..Value6
5....Value7
I want to automate this as much as possible but if it's not easy to do I at least want to at least automatically add a blank row below if value does not = 0 and then I can manually move the values as needed.
I have the following code that works just fine half of what I need it to do. The line that adds the text in column A functions correctly but the code for column B fails because column B is empty by default. The goal is to have the information in column B on the same row as column A. As well as adding two more cells on the same row as column A. The two new columns would be E and G and should be in the same row as the information from Column A. with formulas copied from e2 and g2.
View 3 Replies View RelatedCol AB has numbers from xero to 110 in descending order. I need a macro that will open a blank line between the numbers 29 and 30.
View 9 Replies View RelatedI have a spreadsheet with the following (example) :
Column A :
alabama
alabama
alabama
arizona
arizona
arizona
arkansas
arkansas
I want to insert a blank line (row) wherever the state name changes.....
I have created a message box and I want leave two blank lines in the middle of the text. Is this possible?
At the moment my code for the message box line looks like:
Msg = "This process will print each site for " & UserSlection & ". Before continuing please ensure you have the right printer selected. (I.E. a colour printer where available). The process may take several minutes to complete. Do you wish to continue?"
I just want to move the "Do you wish to continue?" down two lines so that it is easier to read.
I need to do two things in my Excel spreadsheet: 1) I want it to insert a blank row everytime a value in the 1st column changes. 2) In the blank lines, I want to do a COUNTA for each of columns G through N. If I can get the program to insert the blank rows...they will not be a set # of records apart...some will have 3 records & some might have 17 records. Is there a way to automatically cause #2 to happen instead of having to choose the function icon and then tell Excel the first and last cells in each range?
View 1 Replies View Relatedi have a spreadsheet with 21,000 part numbers. I am trying to group the like part numbers, then leave a space between the unlike part numbers. right now my spreadsheet has a space between each part number and i want to eliminate that. but also keeping the part's qty, date, etc. with it.
View 14 Replies View RelatedI have a 97-2003 spreadsheet with approximately 22,000 lines of seperate companies. I need to know how to insert a blank line between the company names. I have been using the "Right Click - Insert" method but soon realized there must be 2000 different companies. The Company Name column is A.
View 7 Replies View RelatedRather than having to give it a range, I'd like to have a generic range giving me room to add or subtract values in the column without changing this statement.
Code:
Worksheets("Sheet1").Shapes("Combobox2").ControlFormat.ListFillRange = _
"O2:O14"
I have a workbook that usually looks something like this
Category Product No description Price
Balloons 12345 Red Disney balloon .50
Balloons 12567 Blue Princess balloon .86
Balloons 76521 Angry Birds Balloon .80
Kites 23456 A Big red Kite .27
Kites 22222 A small blue kite .06
Banners 10000 Party banner .33
etc..
I need to find a way to copy the category below an empty row from column A and paste it in the blank row in column B . If possible to bolden the text but I could probably work that bit out myself. I'm new to this but have used VBA before to run macros.
I need to remove a blank first line from a cell, attached two cells photo. Something with replace "chr(13)" or "chr(10)".
View 6 Replies View RelatedI have the data to import / read in a pdf, in a doc, or in an Excel worksheet whichever is easier to use. I need to import the data, parse it into the correct cells for that row and then repeat the import until the end of the file. Not all the cells are in each group of data to import, so those cells will be null for that row. Some of the data for one cell may be in up to 14 lines in the data file. I have be concatenating these data rows into one cell. There are 48,000 lines in the file to import or I would do this manually. I am assuming that doing this in VBA would be the most efficient method.
View 11 Replies View RelatedOur small family business has a mailing campaign that we track with excel. However, we're very concerned about users opening the macro-filled master spreadsheet. Instead, we'd like a macro to do everything for them.
When a letter comes back in the mail with a bad address, the user types the Street number and street name such as "1234 Main St" into $A2 of c:dropbox eturned.xlsm, presses the macro button, and it should do the following:
Opens and Searches "Sheet1", "column S", in the file c:dropboxmaster1.xlsm, and finds the LAST instance of the address typed.Selects that entire rowCopies the entire row.Pastes the contents into the row of the active cell in the destination spreadsheet, overwriting what was there before. Such as $2:$2 if the address was typed in $A2.In the master1.xlsm spreadsheet, sets the entire copied row color to "gray".closes master1.xlsm and saves changes.
The end result is that the user now has an identical row of information in their spreadsheet, and the master spreadsheet's row is colored gray indicating it has been completed.
Other notes:I'm open to more efficient steps than this if you have them.There are approx 5,000 records to search through in master1.xlsx at any given time.
I have about 180 workbooks which I need to compile into a Master Schedule.
All the tab 1's are different, these feed into tab 2, which the data has the same formatting throughout. The 2nd tab has the same data for A:F 1 but cells A:2 - F:2 down to row 9 are populated from tab 1, therefore different in each. I am trying to get a Master schedule that lifts the data in the fed cells into a line by line spreadsheet?
Is there a way I can get excel to look at a folder, then every workbook in it, the at the 2nd tab in every workbook, then list the cells as described above? I am not after a consolidation of this data, but a full list?
I'm trying to combine 2 cells that both have text on multiple lines separated by line breaks. I want to keep the formatting so that when both cells are combined, line one from cell 1 and line 1 from cell 2 are on the same line in the new combined cell. This is easy to do when there is only 1 line in each cell but how do you do this for cells with multiple lines? Here is an example of what I am trying to do:
A
B
C
1
First Name:
Last Name:
Address:
John
Smith
123 Harold Street
First Name: John
Last Name: Smith
Address: 123 Harold Street
I need to read or clear all the line in specific range which will be increasing dynamically. Problem is "Selected File List" table range is not specified. New file chosen with browse will be added to "Selected File List" dynamically. Number of file can't be predicted.
vbaStk.JPG
What I've tried so far is, keep track of the browse button click and add the file path to arraylist. After that, (Row number 9 which is start line + arraylist size) to get the number of line of end of the table. But due to some requirement, I want to read the file from excel file. Something like -Read until found blank line or border bottom or something.
I'm new to VBA and I'm not so sure what I'm doing with vba codes
I have this function that works on line 3 and if the conditions are met, the result is 1
=SUMPRODUCT(--(IfColor(B3,$A$76)*(SUMPRODUCT(--(D3D4)))))
Here how it works, if B3 is the same color as the reference cell $A$76 and D3 is different than D4 then the result is 1
I would like this function to work from line 3 to line 60 and return the total of lines where the conditions are met. I'm thinking of a =COUNTIF function but can't get something to work. If there is a simpler way, it's even better. The IfColor is a function I wrote in VBA,
I need the Service Order tab to populate with data from the CPR tab based on the IO#. Since there is more than 1 occurrence of an IO# I need a formula to list the 1st, 2nd, 3rd, etc result of the vlookup in the cell under the 1st.
=VLOOKUP($E$2,CPR!$L$4:$AA$12,2,FALSE),
When I drag this down I get the 1st occurrence of the IO# 777 I need all of them.
B C D
Atex ID#(unique id) Campaign name Site
Row 7 1st occurrence of IO# 777
Row 8 2nd occurrence of IO# 777
Row 9 3rd occurrence of IO# 777
I have a worksheet that I need to be able to easily copy and paste the formula/formatting from the row above, but not the Values entered, (if any). I am using columns A to DG.
I just really need to be able to copy all the formula in these cells down - nothing exciting or fancy.
I've tried formatting as a table as per some searches and that was difficult! My column headings changed, and when I inserted a row, two of the formula's wouldn't copy down - plus the shading and borders went wonky in places.
Currently I am using Excel 2000. I did a search and couldn't seem to find the answer I was looking for. Hopefully someone can help. It would be greatly appreciated since I have been trying to figure out how to do this for days.
I am trying to create a worksheet that will pull info from a row on one sheet to another sheet based on the name; then continue to list the info on each line afterward until there is no more of the that particular criteria. See below (this is just an example to simplify the data but would need the same process):
This would be the data on sheet 1:
Name Bonus Commision
Tom $45 $50
Mary $25 $75
Mary $30 $80
Tom $60 $50
Tom $90 $25
What I would like to do is have 2 more sheets. One would be Tom's sheet and the other would be Mary's sheet and it would look like this:
Tom's Sheet:
Tom $45 $50
Tom $60 $50
Tom $90 $25
Mary's Sheet:
Mary $25 $75
Mary $30 $80
I am not completely familiar with all of the functions in Excel and compared to you guys I am a complete novice.
Is this possible to do in Excel without using a macro?
i hv following code
(i use generate macro)
my question is how to arrange the code from one line to multiple like :-
following code show in excel macro environment is one striaght line.
' Create new var on yr , and replace 2006 to CY06.
ActiveCell.FormulaR1C1 = _
I have a spread sheet with product codes on and 5 different prices types but they have only pulled through 4 times so need to insert a 5th line for each product code
View 2 Replies View RelatedWith the attached spreadsheet i cannot workout how with the line graph not to continue the line if there is nothing in row 10 of the table.
for eaxmple if there is no value in cell M10, i would like the actual addtion line to stop at the last value on the graph that was in L10.
I have a multiple line texts I want to convert it in single line like for Example:
The following contents is to be converted in a single line
contents:
[aaaaaaaa] [bbbbbbb]......so on
[cccccccc] [ddddddd]......so on
[eeeeeeee] [fffffffffff]......so on
Result:
[aaaaaaaa] [bbbbbbb] [cccccccc] [ddddddd] [eeeeeeee] [fffffffffff]....so on
I have a spreadsheet where on a weekly basis data is copied in to various tabs. I then have a "formula" tab where I have a single line of formulas which look up the various data tabs and extract the results I want to show.
Currently each week, before I import the new data into the various tabs, I copy the last row in the "formula" tab and paste to the line below it. This contains all the working formulas. I then paste values only on the line that I copied, thus "locking in" the values it calculated with that weeks data. This means that each row then contains the results with that week's data, and this will grow week by week.
What I am looking for is a formula that automates this process. So let's say that row 30 is the final row of data on my formula tab, it contains the formulas I want to use. I would need a macros that does the following:
1. Looks up last row (row 30)
2. Copies last row (row 30)
3. Pastes to next empty row (row 31)
4. Pastes values only to second last row (row 30)
I'm not too great with writing macros, I've found plenty that can find the last row, but I can't get them to work to highlight that row.
I have a chart sheet with a line graph that contains two series: I want to change their thickness, but I am not able to format it with VBA.
View 6 Replies View RelatedI'm working with matrix in vba and i'm trying to put all values of a specific line in that matrix in a line in excel. For example:
Matrix =
1 2
3 4
and i want Range("B1:B2") = 3 | 4 (the second line of that matrix).
Is there any way of doing this without perfoming a loop?
[something like Range("B1:B2").value = 'range'(matrix(0,0) , matrix(0,1)) ]
