Open A Blank Line Between The Numbers
Apr 1, 2007Col AB has numbers from xero to 110 in descending order. I need a macro that will open a blank line between the numbers 29 and 30.
View 9 RepliesCol AB has numbers from xero to 110 in descending order. I need a macro that will open a blank line between the numbers 29 and 30.
View 9 Repliesi have a spreadsheet with 21,000 part numbers. I am trying to group the like part numbers, then leave a space between the unlike part numbers. right now my spreadsheet has a space between each part number and i want to eliminate that. but also keeping the part's qty, date, etc. with it.
View 14 Replies View RelatedCreating a macro that will identify the last blank line in column J and insert a line in it? The macro will need to look from the "bottom" as there is blanks cells above the last line.
View 5 Replies View RelatedAm currently working on a sheet (Attached), which is attempting to take data input in a sheet (PnL tab), and work them into manageable data on the Frontsheet, via the seperate F&O and Equities tabs.
Now, in the Equities section of the frontsheet, my array formula to pull through the data from the Equities sheet is bringing up an erroneous blank line, despite the forumal being told to ignore blanks.
As far as I can tell, this is referencing formulated tabs, and how to stop this from happening.
I am trying to stack the values of a chart into a single column.So my data looks like this:
-------A--------B
1 Value1 Value2
2 Value3
3 Value4
4 Value5 Value6
5 Value7
If cell 1B does not = 0 I want to add a line between line 1 and 2 (I'll call that line "11") and take Value2 and paste it into 11A If cell 1B is blank I want it to do nothing
So I want my data to look like this:
---------A
1....Value1
11..Value2
2....Value3
3....Value4
4....Value5
41..Value6
5....Value7
I want to automate this as much as possible but if it's not easy to do I at least want to at least automatically add a blank row below if value does not = 0 and then I can manually move the values as needed.
I have a ComboBox on a UserForm which is populated with data from a spreadsheet. When I run the program I always get a blank line at the top. Once I select an item from the drop down list the blank line goes away. Is there any way to get the ComboBox to initially display the first item of my list, i.e. no blank line.
View 2 Replies View RelatedI have the following code that works just fine half of what I need it to do. The line that adds the text in column A functions correctly but the code for column B fails because column B is empty by default. The goal is to have the information in column B on the same row as column A. As well as adding two more cells on the same row as column A. The two new columns would be E and G and should be in the same row as the information from Column A. with formulas copied from e2 and g2.
View 3 Replies View RelatedI have a spreadsheet with the following (example) :
Column A :
alabama
alabama
alabama
arizona
arizona
arizona
arkansas
arkansas
I want to insert a blank line (row) wherever the state name changes.....
I have created a message box and I want leave two blank lines in the middle of the text. Is this possible?
At the moment my code for the message box line looks like:
Msg = "This process will print each site for " & UserSlection & ". Before continuing please ensure you have the right printer selected. (I.E. a colour printer where available). The process may take several minutes to complete. Do you wish to continue?"
I just want to move the "Do you wish to continue?" down two lines so that it is easier to read.
I am new to excel and to the bubble chart function and need creating one for a presentation.
I was asked to do a bubble chart to show the open and click to open percentage by subject line
E.g.
Subject line: Win 20% open, 23 % Click to Open, Getaway 20$ Open, 21% CTO etc., to include an industry average for open and CTO in the chart.
X axis: click to open and Y axis: open
I tried the following in the picture and it doesn't look right.
Capture.JPG
I need to do two things in my Excel spreadsheet: 1) I want it to insert a blank row everytime a value in the 1st column changes. 2) In the blank lines, I want to do a COUNTA for each of columns G through N. If I can get the program to insert the blank rows...they will not be a set # of records apart...some will have 3 records & some might have 17 records. Is there a way to automatically cause #2 to happen instead of having to choose the function icon and then tell Excel the first and last cells in each range?
View 1 Replies View RelatedI have a 97-2003 spreadsheet with approximately 22,000 lines of seperate companies. I need to know how to insert a blank line between the company names. I have been using the "Right Click - Insert" method but soon realized there must be 2000 different companies. The Company Name column is A.
View 7 Replies View RelatedIs there an easy way of counting odd or even numbers in a row? I can't figure it out on countif, isodd, odd, count etc.
View 2 Replies View RelatedI have a line of numbers in one cell (B2). They look like this;
1, 21, 21, 94, 64, 2, 213
These numbers are currently in Decimal format (more on that later).
I need to "split" these numbers into individual cells and drop the comma. It would look like this;
B3 B4 B5 B6 B7 B8 B9
1 21 21 94 64 2 213
I know I can use the "text to column" function but I was hoping for a VB script to do this.
The second part is I then need to convert the numbers from decimal to Hex and add a "0" to the front of any single digit numbers.
I can do this part using standard excel formulas with no problems but if it could be added to the script then that would be great.
The final thing needs to look like this;
B3 B4 B5 B6 B7 B8 B9
01 15 15 5E 40 02 D5
1) I work with dozen's of tabs within workbooks, adding rows (that are numbered) etc. When I'm done and want to save the file, I usually go through this routine to make sure I'm at the top of each page before closing the file:
Ctrl-Home, Ctrl-Page Up, Ctrl-Home, Ctrl-Page Up ...through all tabs.
2) I also have to "add" all the extra line numbers (by dragging the last number I had in "row A", and filling down). I need to add the newly added rows to the "print area". Any easy way to do that?
Incrementing line numbers is a simple task.
If line Identification starts with
AA
AB
AC, why doesn't the same rules apply?
Highlight the cells then click and drag the corner down.
If I number my lines of code and an error occurs, the use of Erl in the VBA will then return the exact VBA line number that the error occurred on. Is it possible to automatically capture or record that same effect when the macro process leaves its current sub and goes to another?
Reason: I'm trying to create a Call Stack that can be reported through an Error Handler that will include the exact location and process that the error occurred to better troubleshoot and understand where and why the error occurred.
The best I can come up with so far is manually putting in bookmarks along way so I know how far along the macro went before the error. From all of my searching I believe retrieving the Excel Call Stack is not possible and so one must be manually created.
Enclosed is an example of what I have so far. It goes through several macros and logs the Call Stack. Its a work in progress so it is a little sloppy looking but it is functional. If a Sub finishes it is then taken out of the Call stack.
Several "BookMarks" are placed to give an idea of how far along the Macro has gone within that Sub. The Code for the Erl example is:
Sub SampleErrorWithLineNumbers()
Dim dblNum As Double
10 On Error Goto PROC_ERR
' Errors if table doesn't exist
20 Select Case Rnd()
Case Is < 0.2
30 dblNum = 5 / 0
40 Case Is < 0.4
50 dblNum = 5 / 0
60 Case Is < 0.6
70 dblNum = 5 / 0
80 Case Is < 0.8
90 dblNum = 5 / 0
100 Case Else
End Select
110 Exit Sub
PROC_ERR:
120 MsgBox "Error Line: " & Erl & vbCrLf & vbCrLf & _
"Error: (" & Err.Number & ") " & Err.Description, vbCritical
End Sub
I need to create random numbers with 10 columns and 10 rows.
But for each line can not be the number opposite each decade.
79
22
48
70
04
98
09
41
32
56
[Code] ........
see the first line was generated as the number 79, then this same line, can not generate the number 97.
number 22 in this case is OK.
The first line was generated the number 84, then this is not the same line, you can generate the number 48.
The first line was generated the number 07, then this is not the same line, you can generate the number 70.
and so
97
22
84
07
40
98
90
14
23
65
I have several thousands lines of data....much of the data is the same, 2-5 rows per person, but at the last two columns is different numbers/totals....I'd like to get those all into their own column so that each person has one row with all the data...I USUALLY would sit and sort by each total, shift them over to the right into their own columns, then sit and shift them all up to one line...but thats a carpal tunnel project and i know there must be an easier way....subtotalling brings the numbers down to one line once I have shifted each one over, but not the rest of the data....
Pic Attached: Excel problem pic.JPG
See the code below. It works fine but in the report that gets printed off, it doesn't display grid lines and line numbers .
[Code] .........
I am looking for a time saver macro,pretty easy to make i guess,as the theory is not difficult...but i am too newbie to make it. So i have an xls that has like 20k lines on Column A!And i have to seperate the numbers. I count the first 4 digits and I have to do it by adding a cell between them.
Example :
27289802
27289902
27289915
27289915
(add a null line)
27290202
27290302
27290316..................
i want to hide rows in accordance with the line numbers that have been determined with Macro, on G3 (Start Rows) and H3 (End Rows).
And i have attached my example file on excel (.xls)
I have thousands of lines of data that are of the following form:
Jackson, TN 9623 BCBS TN 98 UnitedHlthCare 2
Jacksonville, FL 3577 Aetna 47 BCBS FL 37
Knoxville, TN 3796 Cariten 44 John Deere 41
Lakeland-Winter Haven, FL 2165 UnitedHlthCare 31 Aetna 29
I need to separate these lines into columns such that, for example, the first line would be in 6 columns: (Jackson, TN) (9623) (BCBS TN) (98) (UnitedHlthCare) (2)
The delimiter does not work because some of there is no one character that always separates the text and the numbers. I've tried going through in word and typing something like '%' where I want to separate, but with thousands of lines of data that is extremely tedious.
Is there any formula I can use that would be capable of solving this?
I currently have a macro that will work if there is a workbook open. However I would like to change it to, once the macro is sected from toolbar, it opens a blank workbook and then does what has been set up. What line(s) of code would I use to do this at the start?
View 5 Replies View RelatedIs there any way I can display line numbers against the code in the Visual Basic Editor?
Or can I see in the current line number in the status bar?
or GoTo Line number?
When I open my workbook, I'd like to go at the first empty row of the worksheet.
View 14 Replies View RelatedThe following code opens Word correctly, but has too many tool bars open. I only want the tool bars to be opened, just like when you click on the Word Icon at the bottom of the screen. I do not want the following 3 tool bars to open . . . Drawing, Reviewing & Microsoft Office Live Add-In.
View 2 Replies View RelatedI want to create a dynamic line graph using week and year numbers stated in another sheet.
e.g.
Start Year - 2012
End Year - 2014
Start Week - 3
End Week - 12
The top 2 rows above my graph data are as below:
Year - 2012 2012 2012
Week - 5 6 7 etc.
This works fine if the start and end year are the same but if it's greater than one year, it doesn't recognise that.
I have a spreadsheet, in which I need to lookup invoice numbers from a raw data file with ~5,000 line items on a daily basis. The lookup is based on two criteria searches (1) search product type (2) search product make. In this example, I have 4 product types:
1 car
2 truck
3 boat
4 motorcycle
For this example I want to search invoices; (1) first search for cars only (2) search for product make. In my attached example, the first item (cell E2) would return invoice number 7147875-FRD from the raw data file. The second item (cell E3) would return invoice number 7147877-NSN.
Actual
Result
london#123;new york#34;
london;
new york;
delhi#145;chennai#54;
delhi;
chennai;
hyderabad#748;
hyderabad;
[code]....
removing the # and numbers from text and add new line after ; symbol. So it would save me a lot of time in preparing status.