Blank Values In Control / Check Table
Nov 18, 2013
I am building a table for staffing purposes, and I basically only need to controls to "validate"/approve the table.
1. The number of staff put in must equal the required amount of staff (E column)
2. The same staff cannot be put on twice for the same time period (which I have done by the OR(F7=G7,F7=H7,G7=H7) as part of the validation)
My problem is that sometimes I need 0 staff (when its closed), but when I leave it blank obviously it wont approve the table because of rule #2 above, since it thinks the blanks are the same staff member.
I have tried with some ISBLANK statements, but it wont work.
View 4 Replies
ADVERTISEMENT
Jul 20, 2012
I am trying to automate creation of pivot table, where the first three fields will go into the RowLabel field, and the rest of them will go into the values as "Sum of ____".
Is it possible? Because I could do it one by one; however, those fields are different every time (there are different number of those fields, and their values are also different).
View 1 Replies
View Related
Apr 30, 2013
I have searched and found a lot of references to the web browser control for a user form. I have tried and tried but all I get is a blank webbrowser control.
I have tried the navigate and navigate2 methods and other stuff that you can see that I have commented out. Also, I tried placing the line with the navigate method both before and after the userform.show method. But all I get is a blank web browser on the form.
Here is what (sort of) I have tried:
VB:
Sub ShowTheForm()
'Dim myPerm As Office.Permission
'Set myPerm = ThisWorkbook.Permission
[Code]....
So, what's the trick. All the stuff I found searching the web implies that what I have above should work.
View 6 Replies
View Related
Mar 27, 2014
I am creating a tracking spreadsheet where i can toggle between months (attached). It returns data properly when I select January or February from the yellow highlighted dropdown list. However, when i choose March, it returns 1/0/1900 because no data has been entered for March (table array) on the AAAG tab. How do I write the formula to return a blank cell on the summary sheet when no information has been entered into the table array yet?
View 2 Replies
View Related
Apr 21, 2014
I have a number of rows that contains data (normally numeric):
0 | 0 | 0 | 0 | ... |True
1 | 0 | 0 | 0 | ... |False
0 | 1 | 0 | 1 | ... |False
What's the formula that gives the True/False answers? I could go IF(AND(A1=0,B1=0,etc...),TRUE,FALSE) that gets the results, but can it be done in a smarter method or can it done via array method?
View 4 Replies
View Related
Sep 11, 2012
code to get to know about the sheet in a worksheet is blank and then delete that.
View 5 Replies
View Related
Jun 4, 2008
I'm trying to scan a column of data, example column H, for empty cells, if it's empty then skip it. This doesn't work, because cell.Value = " ":
If cell.Value 0 Then
'Extra coding
Else
End If
View 9 Replies
View Related
Oct 8, 2013
Table1 (TeamA)
Table 2 (TeamB)
Name
Date
Name
Date
Table 3 (TeamC)
Table 4 (TeamD)
Name
Date
Name
Date
Given above is a single Sheet in excel with Four Different Tables for each team. I would like to scroll and enter data separately in each Table.
Say for Example Table 1 Team A
Scroll through the rows (1-100)
Enter Data (in any row)
Freeze panes at header
Likewise for all the tables separately. I had tried using split panes, but that is not what i am looking for.
View 1 Replies
View Related
Feb 4, 2013
When a file is open, if cell A1 has a text "Hello there", then I want to make this cell add a blank space as "Hello there ". Let's save this file and close. So now if I re-open it, I want cell A1 to remove the added blank space and revert to be "Hello there". This take turns to change back and forward.
View 8 Replies
View Related
Jun 9, 2014
How can I write code to test if a cell is blank? My code is using "isempty" but I keep type mismatch error because my cells are filled with formulas that make the cells blank. It only works if the cells are truly empty with no formulas.
View 8 Replies
View Related
Nov 24, 2008
i attach my sample excel file here, book1.xls. sheet1, "input". it check the column "C" row by row and if it detect the different content data in next column, it will auto insert a new row. it will ignore the space. below is my coding:
View 3 Replies
View Related
Aug 27, 2009
I have a vlookup formula I would like to add another If statement to.
=IF(ISNA(VLOOKUP($O2,Table!$A$2:$I$72,9,0))=TRUE,"Not In Table",VLOOKUP($O2,Table!$A$2:$I$72,9,0))
This works fine, but if the field that it is returning (9 in the case above) is blank, I get a zero in the destination cell.
Can I add another check in this formula to see if the destination cell is zero, but display a blank?
View 2 Replies
View Related
Apr 23, 2007
See attached spreadsheet for example of the sheet I am using.
Problem 1.
Columns C and D show me figures when the number in col A is > 2500 or < 550 when these criteria are not met a 0 is displayed in the cell, is it possible to alter my formula so that nothing (a blank cell) is displayed rather than a 0 - I am wondering if there is something like null which I can use?
=IF(A4>2500,A4,)
=IF(A4<550,A4,)
Problem 2.
In column E (normal days) I want to display the value of A if it is > 550 but < 2500 - is there a way of doing this in a single formula? Again I would just like a blank to be displayed if the value of A does not meet the above criteria.
View 4 Replies
View Related
Aug 25, 2007
I have X amount of cells (formulasheet) , these are used to input data, which is then summarized into a sheet on the same file. I'm trying to find a code that forces the user to fill out all the fields. If the user do not, the "submit button" will not proceed, at least not work. Almost like a forum registrating, where it is required to fill it all some mandatory fields in order to proceed.
The cells datatypes are mixed, some are Integer and some are String.
Is there anyway that are code can be written "if the cell(s) is FALSE (nothing in the cell) then display message.
View 5 Replies
View Related
Aug 22, 2014
I need to make a vlookup which returns values for many 1000 material numbers. The values is located several other files. My problem is that i dont want to update all vlookups every time the other files (with my values) are getting updated.
e.g.
i want to have en cell A1: FileNameVersion1 and when someone updates the file the only thing i have to do is to change the name in cell A1 to FileNameVersion2.
View 3 Replies
View Related
Aug 22, 2008
Does excel have a formula to check to see if every row in a specific column is blank and if it is then set the value?
View 10 Replies
View Related
Oct 27, 2008
Got a table where I've placed Data validation - List on them.
Placed a macro on a button so that the data on the table where the validation list is placed is transfered to another sheet (same workbook).
What I need is a to modify the macro assigned to the button so that when the button is clicked to activate the macro:
a.) Can identify if there are any blanks on specified cells with validation list
b.) Stops the macro from copying the fields to the other sheet
c.) Alert the user of the blanks (an alert stating there is a blank would suffice)
d.) Alert should preferably be similar to a Stop alert from Data Validation.
Can anyone help? Been reading through several threads but don't seem to find anything that could help me - tried reading a Visual basic thread and now i've got a headache....
View 15 Replies
View Related
Apr 16, 2012
with some basic code. I want to check the activecell, if it's blank then copy the contents from the cell above, if it's not blank, leave it & go down to the next cell & repeat until last row.
View 7 Replies
View Related
Aug 3, 2012
I am using a Uderform in order to check if some cells in several columns are higher or lower than values I set in my textboxes.
However, I think I am having a mistake in my code (it runs but doesnt return the correct informations) as I have blank cells in certain columns.
Concretely I am giving 1 point if the criteria is valid (if for example the value in the cell is <= 1) but some of these criteria are 1 when they should be 0.
As I said it runs but I need to add a fix for empty cells / blank cells and if possible N/A error cells in this so that the code gives 0 to the criteria and moves to the next column (next select case)..
View 2 Replies
View Related
Dec 19, 2012
I have attempted to alter this example to simply check if the cells are not blank by replacing the "X" with "<>", but I get errors in the SMALL function--it looks like the IF statement is just returning an array with all of the values set to FALSE, and none of the values in the array call out a location of the next filled cell.
How could you alter your fixed XLSX file to check for non-blank cells instead of "X" specifically?
View 2 Replies
View Related
Sep 19, 2006
I have 12 different sheets named April-06-sales through to march-07-sales. I need is to be able to search all of the sheets and check if the invoiced paid column is blank and if it is copy that row into a new sheet. All of the sheets have a different number of rows.
View 2 Replies
View Related
May 8, 2012
I need a formula that will search the range D8-D100 to confirm that all cells within that range are either 11 characters in length or blank. I will use it inside of an error message that will look something like this:
=IF(****formula that checks to make sure all of the cells in that range are blank or 11 characters****=TRUE, "", "Please make sure that all cells are 11 digits or blank")
View 7 Replies
View Related
Sep 1, 2006
i have made a simple userform in which there are 3 combo boxes. a user chooses options from these boxes and then these options are put into 3 cells in a worksheet. what i need to do is create a macro or vba code so that the contents of these 3 cells are used as the Criteria for the autofilter.
View 4 Replies
View Related
Jan 16, 2008
I have userform1 with commandbutton1 and listbox1. From listbox1 you make a selection and then you click commandbutton1 and it calls up another form (userform2.) On userform2 I have a label that I need to capture the value highlighted in listbox1 form userform1. How do I write this code to have label update to the listbox selection?
View 2 Replies
View Related
Feb 8, 2009
I have a table in excel range B5:M32 with the top two rows containing merged cells (B5:M6). I need to write a macro to copy data from cells B38:C38 into the above table.
I need the macro to first check to see if there is any data already entered i.e. check if the table is empty. If it is empty then paste the cells in the first cell (B7). If the table already has data entered i need to move to the last entry then move down one cell and paste the copied cells.
I have figures out the copying/pasting functions but am struggling with the part to check if the table is empty and moving down the table without using cell references.
View 3 Replies
View Related
Jul 11, 2013
I am familiar how to perform the task of bringing in an access table into excel, then using a data validation filter to control the data set in Excel 2003.
How to replicate this procedure in Excel 2007?
View 1 Replies
View Related
May 27, 2007
Is there a way to make the colours in a chart (pie, column etc) correspond to a value? I'm using Excel 2002, soon to start using 2003.
For example, imagine a normal pie chart showing the population of each country in North, Central and South America. But for each country, colour gradations would be used to show levels of wealth (e.g., GDP per capita) as follows:
saturated red = bottom 20% (poorest)
pink = 21-40th percentile,
white = 41-60%,
gray = 61-80%,
black = 81-100% (richest)
Is this possible? And not to get too greedy, but can you use even finer gradations -- say, with ten categories, as opposed to the five in the example above?
View 9 Replies
View Related
Aug 29, 2006
I have an issue with some unwanted items in a listbox that gets its data from a pivot table, however it only happens with the one pivot field and for three of its pivot items.
I tried following a suggestion from an earlier thread to re-create the pivot table, but it did not work.
I'd like to post the file, but its too large, even in zip format.
View 9 Replies
View Related
Jan 9, 2007
I am using a calendar control 11 in a user form. I would like to create a combobox on a user form that when you click the drop down button it opens the calender then the user can select a date which is then returned to the combobox. I beleive the way to do this is to trap the dropbuttonclick event. Tho it dosent seem to work.
Private Sub ComboBox2_DropButtonClick()
Calender.Show
ComboBox2.Value = Calender.Calendar1.Value
End Sub
View 5 Replies
View Related
Apr 19, 2008
I have been trying to use a multi-select listbox as the argument for a subroutine. For some reason, I keep getting a run time error, type mismatch. I'm baffled because when I define the specific listbox, it works fine, but when I attempt to pass the listbox I get an error.
Public Sub OtherDirectTotal(Expense As ComboBox, CostCat As ComboBox, _
Cost As TextBox, Years As Msforms.listbox)
Dim IDC As Double
Dim IDCt As Double
IDC = Val(UserForm2.txtIDC) / 100
If Years.Selected(0) = True Then
If Expense = "Sponsored" Then
If UserForm2.ChkODC = False Then
Select Case CostCat......................
View 2 Replies
View Related
