I have a vlookup formula I would like to add another If statement to.
=IF(ISNA(VLOOKUP($O2,Table!$A$2:$I$72,9,0))=TRUE,"Not In Table",VLOOKUP($O2,Table!$A$2:$I$72,9,0))
This works fine, but if the field that it is returning (9 in the case above) is blank, I get a zero in the destination cell.
Can I add another check in this formula to see if the destination cell is zero, but display a blank?
I am creating a tracking spreadsheet where i can toggle between months (attached). It returns data properly when I select January or February from the yellow highlighted dropdown list. However, when i choose March, it returns 1/0/1900 because no data has been entered for March (table array) on the AAAG tab. How do I write the formula to return a blank cell on the summary sheet when no information has been entered into the table array yet?
View 2 Replies View Relatedin one column of my spreadsheet and it is returning the correct concatenation for the appropriate lines. However, I wish to have the column's cells return an answer of blank (" ") if B15, B16... etc is blank. In other words, at the moment, a correct answer would read something like '1810sd0000' C10 and B15 used, while an incorrect answer would still display '1810', but I want it to be a blank cell.
View 8 Replies View Related=IF(D$21="SOUTH FLORIDA 6","6 MONTH FENCE RENTAL",
IF(AND(D$21="SOUTH FLORIDA 12",S15=24),"24 MONTH FENCE RENTAL",
IF(AND(D$21="SOUTH FLORIDA 12",S17=12),"12 MONTH FENCE RENEWAL",
IF(AND(D$21="SOUTH FLORIDA 6",S16=6),"6 MONTH FENCE RENEWAL",
IF(AND(D$21="SOUTH FLORIDA 12",S14=18),"18 MONTH FENCE RENTAL",
IF(D$21="SOUTH FLORIDA 12","12 MONTH FENCE RENTAL",
"BIKE BARRICADES ARE ALSO AVAILABLE"))))))
I having trouble getting this IF statement to function properly. The Bold section is the part that will not function properly. I have checked all the spelling, spaces, but for some reason it wont display properly.
Based on the above is there a way to make this a type of lookup?
Im at wits end with all the ifs.
Can you make the first part (the logical test) be anything other than a numerical value? I want a value to display only if a check mark (using the wingding font for the check mark) appears next to certain items in a list. For example: =If(A1=checkmark,B1+C1,""). If I am not clear maybe I can explain it another way.
View 4 Replies View RelatedI have a number of rows that contains data (normally numeric):
0 | 0 | 0 | 0 | ... |True
1 | 0 | 0 | 0 | ... |False
0 | 1 | 0 | 1 | ... |False
What's the formula that gives the True/False answers? I could go IF(AND(A1=0,B1=0,etc...),TRUE,FALSE) that gets the results, but can it be done in a smarter method or can it done via array method?
code to get to know about the sheet in a worksheet is blank and then delete that.
View 5 Replies View RelatedI'm trying to scan a column of data, example column H, for empty cells, if it's empty then skip it. This doesn't work, because cell.Value = " ":
If cell.Value 0 Then
'Extra coding
Else
End If
when I use the =sum command of a certain cell and that cell contains no data I am getting a $0.00. I understand why, but can I display just a blank cell if no data is found in the cell?
View 3 Replies View RelatedWhen a file is open, if cell A1 has a text "Hello there", then I want to make this cell add a blank space as "Hello there ". Let's save this file and close. So now if I re-open it, I want cell A1 to remove the added blank space and revert to be "Hello there". This take turns to change back and forward.
View 8 Replies View RelatedHow can I write code to test if a cell is blank? My code is using "isempty" but I keep type mismatch error because my cells are filled with formulas that make the cells blank. It only works if the cells are truly empty with no formulas.
View 8 Replies View Relatedi attach my sample excel file here, book1.xls. sheet1, "input". it check the column "C" row by row and if it detect the different content data in next column, it will auto insert a new row. it will ignore the space. below is my coding:
View 3 Replies View RelatedSee attached spreadsheet for example of the sheet I am using.
Problem 1.
Columns C and D show me figures when the number in col A is > 2500 or < 550 when these criteria are not met a 0 is displayed in the cell, is it possible to alter my formula so that nothing (a blank cell) is displayed rather than a 0 - I am wondering if there is something like null which I can use?
=IF(A4>2500,A4,)
=IF(A4<550,A4,)
Problem 2.
In column E (normal days) I want to display the value of A if it is > 550 but < 2500 - is there a way of doing this in a single formula? Again I would just like a blank to be displayed if the value of A does not meet the above criteria.
I have X amount of cells (formulasheet) , these are used to input data, which is then summarized into a sheet on the same file. I'm trying to find a code that forces the user to fill out all the fields. If the user do not, the "submit button" will not proceed, at least not work. Almost like a forum registrating, where it is required to fill it all some mandatory fields in order to proceed.
The cells datatypes are mixed, some are Integer and some are String.
Is there anyway that are code can be written "if the cell(s) is FALSE (nothing in the cell) then display message.
The two formulas below are used for splitting a cell reference in two after the "-"
Formula:
I need to be able to add an extra formula to the above which will only display if the source cell of the reference is NOT "0000 - Extra Core Hours".
Does excel have a formula to check to see if every row in a specific column is blank and if it is then set the value?
View 10 Replies View RelatedI am building a table for staffing purposes, and I basically only need to controls to "validate"/approve the table.
1. The number of staff put in must equal the required amount of staff (E column)
2. The same staff cannot be put on twice for the same time period (which I have done by the OR(F7=G7,F7=H7,G7=H7) as part of the validation)
My problem is that sometimes I need 0 staff (when its closed), but when I leave it blank obviously it wont approve the table because of rule #2 above, since it thinks the blanks are the same staff member.
I have tried with some ISBLANK statements, but it wont work.
I have a table that has 6 columns and 5 rows. I need to check a name (division) against the column heading, then and return a classification from the first column based on the score.
Below is an example of what I am using (I'm not sure how to post a screen shot):
DIV1 DIV2DIV3DIV4DIV5
A91.7689.4198.82100.82102.35
B111.43108.57120.00122.00124.29
C141.82138.18152.73154.73158.18
D195.00190.00210.00212.00217.50
E195.10190.10210.10212.10217.60
DivisionDIV3
Total Score 155.6
ClassificationC
Hi, I desperately need help with a pivot-table and can't find anyone else who's ever had this problem...I have a very large healthcare data table which for simplicity I will describe as follows. In essence the first two columns respectively are (A) location and (B) month. Let's say the third column (C) is the number of cases of the disease kidpox treated in each health centre during that month. The fourth column (D) is the total number of cases of everything treated during that month in each clinic. The fifth column (E) is the proportion of cases of this disease over all consultations for each health centre and month, and the formula in E2 is .....
View 9 Replies View RelatedUsing one spreadsheet with three date columns and two columns counting days.
If there is a value in Resolution date, then Column N is blank
If there is no value in Submit date and Resolution date, then Column N is blank
If there is no value in Resolution date, and there is a value in Submit date, subtract Submit date from todays date to show how many days it has been pending approval
Created on = J4
Submitted on = K4
Resolution Date = L4
Days to Approve = M4 I've got that formula =IF(L4="","",L4-K4)
Days Pending Approval= N4 (cell with formula)
If Resoultion Date L4 has a value, return blank
If Submit on K4 and Resoultion date L4 are blank, return blank
If Resolution date L4 is blank, and Submit on K4 has a value, subtract Todays date from Submit on K4 to show Days Pending Approval
Cell J4______Cell K4______Cell L4__________Cell M4__________Cell N4
Created on___Submit On___Resolution Date___Days to Approve___Days Pending Approval
4/5/13_______blank______Blank____________Blank___________Blank
4/5/13_______4/5/13_____4/7/13___________2_______________Blank
4/5/13_______4/5/13_____Blank____________Blank___________()Today-K4
I am using this formula, but if the referenced cell is blank, it keeps putting a 0 in the cell. I want the cell to be blank if the referenced cell is blank.
=IFERROR(INDIRECT($E$1&"!$C4"),MATCH(INDIRECT($E$1&"!$C4"),""))
I am using concatenate to create a list of bottles based on other data, so that each cell contains a different combination of bottles.
The problem is that the list appears but there is also FALSE for every bottle that doesn't relate to that cell.
Is there a way to create a formula such that nothing appears if it is not true?
And is there a shorter way of writing what I am after, I can't quite finish the formula becaise it is so long.
This is what I am using: .....
I have this formula in a cell:
=IF(AND($D4=H4,$F4=I4),3,IF(SIGN($D4-$F4)=SIGN(H4-I4),1,0))
but i need to somehow incorporate a formula that only shows this if a cell has a value present.
I know as an example its something like:
=IF(C2="","",C3)
but i dont know how that would go in my existing formula as i dont know how to stack IF statements?? (a very kind person on this forum did the original formula btw)
the cell that i need to have as the 'blank or not' is D4.
I am trying to use Index but problem is where there is no Value Index should show Blank instead it is putting 0 or N/A
View 5 Replies View RelatedI've got a spreadsheet where i need the user not be able to save the workbook if there is a blank row in a range of task which run from A4-last cell with data entered.
I would like it to say that "the row will be deleted, please amend"
After the check has been completed or varified it saves
Got a table where I've placed Data validation - List on them.
Placed a macro on a button so that the data on the table where the validation list is placed is transfered to another sheet (same workbook).
What I need is a to modify the macro assigned to the button so that when the button is clicked to activate the macro:
a.) Can identify if there are any blanks on specified cells with validation list
b.) Stops the macro from copying the fields to the other sheet
c.) Alert the user of the blanks (an alert stating there is a blank would suffice)
d.) Alert should preferably be similar to a Stop alert from Data Validation.
Can anyone help? Been reading through several threads but don't seem to find anything that could help me - tried reading a Visual basic thread and now i've got a headache....
with some basic code. I want to check the activecell, if it's blank then copy the contents from the cell above, if it's not blank, leave it & go down to the next cell & repeat until last row.
View 7 Replies View RelatedIs there a good way to check two columns at the same time and return the value in the 3rd?
Example
12 0.07 8
12 0.37 10
12 0.82 12
12 1.30 15
12 3.90 22
12 8.00 28
12 15.00 35
I look for 12 in the first column with vlookup but I need to also look for a figure in the 2nd column which is greater than my figure. So say I want 12 & 6.0 I would want the formula result to be 28 because the nearest larger number in the table column 2 is 8.00.
I would like to check/search if (FileName As String) is still exists in its directory.
--Why as string: because I have a hidden kollom where the links to the files are in txt format.--
I can't write VBA But maybe I can sketch it?
Let's say i got something like this
A B C D Result
200 250 Apple 600 Melon
251 450 Orange 225 Apple
451 700 Melon 325 Orange
751 900 Grape 457 Melon
So based on my example above, I have those data from column A to column D Now, how do I check if the value from column D belong to which category from column C based on the column A and B?
225 -> 200~250 -> Apple
325 -> 251~450 -> Orange
etc.
The result will appear on "Result" Column