is it possible to concatenate the contents of several cell vertically into a single cell? like using (e.g. B47&B48&B49&B50&B51&B52) in a statement but make it vertical? and make some parts blank if it does not contain data.
(CODE)=IF(AND(A45=”1”),*CONCATENATE VERTICAL B47 to B52*, IF(AND(A45=”2”),*CONCATENATE VERTICAL D47 to D52*, IF(AND(A45=”3”),*CONCATENATE VERTICAL F47 to F52*,””)))
(please see attached file for reference)
I have attached a workbook stating my problem.
file1.xlsx‎
I thought this was a pretty simple formula but I am having difficulty creating it. I am attaching a little test spreadsheet. Sheet 1 is where the data will be entered. The Reimbursed column has a drop down choice of yes or no. The next 2 columns are the cost of registration and the cost of accommodations. On sheet 2 is where I would like the formulas. So in cell A4 I would like a formula that says if B3 on sheet 1 is Yes populate this cell with the contents of Cell C3 only, B4 of sheet 2 would then be B3 if A3 on sheet 3 is Yes and so on with the Not reinbursed if sheet 1 the Reimbursed column is no.
View 3 Replies View RelatedI have a list of P/N's that are used in more then one location. and it's sorted by P/N's.
ColA__ColB__ColC
______Loc___PN
______1_____A
______2_____A
______3_____B
______4_____C
______5_____C
I Want to be able to put in Col A the concatenate results of all equal P/N's from any given list. Or at least select the few cells that i know are duplicates and from that copy the Location to a single Column.
ColA ColB__ColC
______Loc__PN
1,2____1___A
_______2___A
_______3___B
4,5____4___C
_______5___C
In row 3 I have values horizontally. (A3 to Z3)
i link C5 to A3.
If I drag it vertically it does not give the correct values.
Is it possible to drag it in a correct way?
I tried =INDEX($A$3:$X$3,ROWS($A$3:$A3))
Sampling table :
one
two
three
four
one
two
three
one
two
one
Desired results obtained via IF =IF(B2>0,A2&" , ",A2)&IF(C2>0,B2&" , ",B2)&IF(D2>0,C2&" , ",C2)&IF(D2>0,D2,"")
one , two , three , four
one , two , three
one , two
one
Is there any smarter, shorter formula via Concatenate and Substitute or other formulas ?
My closest match, but not good enaugh is =SUBSTITUTE(CONCATENATE(A2&", "&B2&", "&C2&", "&D2), ", , ", " ")
[ returna 2 commad ]
one, two, three, four
one, two, three,
one, two
one ,
Basically I want to see more dates, as you can see I've dropped down Cell B1 (31-Mar) to the B28 (27-Apr) Obviously if I wanted to see past 27-Apr I would just continue the drop down but I want to keep it within 28 rows and carry the dates onto cell C1-C28, D1-D28 etc, is there any way to do this using the drop down function or will I have to drop down each column individually then look date in the last row of that column and type the next date myself on the next column and drop it down?
View 1 Replies View RelatedHow can I submit the data from userform in the spreadsheet vertically like A1,A2,.....
View 9 Replies View RelatedI have a formula that i'd like to "click and drag" down but while i do i want it to increment through columns
a
b
c
[Code]....
in cell A1 i'd have the formula
VB: =max(c1:c5)
and it will spit out 15, that's great but when i drag the formula down i want cell A2 to give the value 20
i'd like
VB: =max(c1:c5)
to somehow turn into an equivalent
VB: =max(g1:g5)
by only dragging down, not to the side
I have a spreadsheet with a summary tab and 30 data tabs. The data tabs are named page-1 to page-30. In the summary page I have the following formula in cell C39: 'page-1'!C20
I want to be able to drag horizontally across 30 cells and have it increment to 'page-2'!C20, 'page-3'!C20 etc.,
and also drag it vertically and have it increment to 'page-1'!C21, 'page-2'!C22 etc.
I am trying to link from one spreadsheet to another and drag the cells down to copy the forumula, however I want to drag vertically on Sheet 1, and Copy the values horizontally from sheet 2.
For example, in sheet 1 I link cell A1 to equal cell A1 in Sheet 2. If I drag down the formula in sheet 1 A1:A10 then it will copy the values in cells A1:A10 in sheet 2.
Now what I want it to do is for me to drag the formula in cell A1 down to A10 in sheet 1, but for this to return the values of A1:J1.
I know I can freeze panes eithe across a column or row but is it possibleto do both at the same time so that I can have a header row and a few columns on the left of the screen frozen?
View 2 Replies View RelatedI'm trying to lock the cells of my work book both vertically and horizonatlly. There are "header criteria" on both colums and rows that I want to lock so when you scroll down or over the title bars stay. When I've done it in the past it won't let me lock both correctly.
View 7 Replies View RelatedThe default sheets are at the bottom. I would like to move the bottom horizontal sheets to left side vertically.
How to display all sheets name at the left vertically permanently?
I have a list of numbers I want to display horizontally instead of vertically. Is there a simple way to do this other than retyping each number?
My worksheet is attached.
Had a quick browse through the forums for an answer but as it is quite hard to describe i cant quite find the answer.
Basically I need to split some cells but they have stacked text in them i.e
Cell a1 shows:
666666
part 77777 x 20
5x s452563
Cell b1 shows:
1x 254684564
3x 4481211111 & 5 ea g8373
etc.
When i run the text to columns function i only get the first line of the data, i could ideally like to split the data by spaces and/ or line breaks.
How do you freeze horizontally and vertically at the same time?
View 3 Replies View Relatedi want to pick data from every 2 columns and arrange it vertically, one under the other ;
sample data:
A 579751 579800 52151 52175 126721 126750
B 546451 546500
C 608971 609000 508081 508110 548941 548970
E 962701 962750 24851 24875
desired outcome:
A 579751 579800
52151 52175
126721 126750
B 546451 546500
C 608971 609000
508081 508110
548941 548970
E 962701 962750
24851 24875
In the attached spreadsheet, I have the original data display horizontally (sheet2). Col A is Patient #. The header in row 1 are the test codes. Each patient took only 1 test and have result reported either neg, pos, pending or not eval. How do I transpose the header and have the test results consolidated in 1 column accordingly as display in sheet 3.
View 4 Replies View RelatedFor what reason would a table not extend vertically on it's own when an entry is made in the next row directly beneath it? On all of my sheets I could swear the table will automatically extend vertically, but on one workbook that has 10 duplicated and then modified sheets with tables (I mention that for it might have been something from the original that was copied that is the problem), the table easily expands horizontally when a value is placed in a column next in line, but not the same for the next row!
View 7 Replies View RelatedI have many excel sheets with 1000 columns and 100,000 rows. I have to import these sheets into SAS system which wont let me import more than 250 columns per sheet (it misses the remaining columns, though rows it can import all of them). So, one solution is break each such sheets into 4 individual sheets. Ofcourse I can manually take the cursor to 250th column and copy/paste that data into another sheet and so on. But this is cumbersome and also means there is chance of mistake.
Is there a way I can divide the sheets into 4 sheets separately with each sheet having equal number of columns? Another thing I need to do is that on the top row there are company codes -most of them start with a letter which is fine. There are few which start with a number and I have to add a dummy letter x before the number. Now since there are 1000 columns, I have to scan the top row of all 1000 columns to find number codes which are scattered unevenly. So I was wondering if there is a way to tell excel to change all such number codes with extra x behind each number?
We can center horizontally with TextAlign (Left, right or center). Can we center text in a textbox on a userform vertically? I am working with multiple fonts, when a user selects a font I attempt to format a textbox as a display to show what is being created (Best WYSIWYG as I can). I have this particular font that is just ugly but is required. My textbox is set for a 12 point font but the displayed characters partially appear below the lower portion of the textbox. Think of cutting off about 1/3 of the bottom of all text in the textbox.
In my textbox it seems like the text could be moved up (some type of top margin?). All other fonts appear to display in the textbox vertically central, so I believe its the particular font selected causing the as displayed anomaly.
I know how to center text from left to right, but how about from top to bottom?
View 3 Replies View RelatedIs it possible to vertically center the text in a userform label? For example: I have a label that's 22px high, but the text is only 10pt -- at the moment it just hangs out at the top of label looking bad.... I'd like to place it the middle if possible.
View 2 Replies View RelatedSee the below columns: Column A and Column B. I would like to get all the data in column A to become column names and the data assorted under these column names vertically.
Column A Column B
0_country Canada
0_employee_type HE
0_province" AB
[Code] .........
I would like the end result to look like this
0_Country 0_employee type 0_province
Canada HE AB
USA HO CA
UK HL XY
Is there a way to control the vertical size of a textbox, so that we could type in a List of Instructions to our operator, and the textbox would resize depending on the numbers of instructions in the box. Also the items in the cells beneath the textbox would need to move down, to allow for the resized textbox.
View 3 Replies View RelatedI have 6 columns:
A1 = LastName
B1 = FirstName
C1 = LastName2
D1 = FirstName2
I need to concatenate into 1 cell so it looks like this: FirstName LastName;FirstName2 Last Name2. Now the challenge is that there are many instances where C1 and D1 are blank (don't have values).
So here was my attempt at a formula:
=IF(A1>""&B1>"",CONCATENATE(B1," ",A1))& IF(C1>""&D1>"",CONCATENATE(";"&D1,"",C1),"")
Now this works, but it ALWAYS leaves a semi colon at the end (even when there is no C1 and D1 to concatentate. Thus I put in my IF statement the "".
I have 2 columns on sheet 1 as below. I need a code to put all the data in column B vertically on sheet 2 as the result shows. Please note all cells data will be off various lengths all seperated by a comma.
Sheet1 Â AB2BK
1003 CV1173, CV3133BK1004 CV1010, CV1010A, CV13514BK1005 CV1012, CV1257, CV17995BK1006 CV1836, CV506
Result after code has run.
Sheet2 Â AB1
BK1003CV11732BK1003CV3133BK1004CV10104BK1004CV1010A5BK1004CV13516
BK1005CV10127BK1005CV12578BK1005CV17999BK1006CV183610BK1006CV506
I have been sent a very large file of product data from one of my suppliers, They sent all of the details in separate fields (for example, colour, height, width, depth, material etc)
I have processed all these columns to appear how I want them, but now need to join them together so they can all be added to my main description. I want each one to be on a new line when it's displayed on my website, so I'll be adding a <br /> tag (break tag) after each item. This I can do no problem.
This would all be fine, if all the columns contained data, but a lot of the time the columns do not contain data (eg. I have a column for "knife length" but not all of my products are knives, so not all of them require this information"
for example, I have something like:
SKU | Colour | height | width | depth | material
ABC | blue | 50mm | 10mm | 60mm |
BCD | | 80mm | 75mm | 30mm | wood
CDE | red | | | | plastic
I could use something like :
=CONCATENATE($A2, " <br /> ", CHAR(10),$B2, " <br /> ", CHAR(10),$C2, " <br /> ", CHAR(10),)
This however means writing a piece of code for each cell I want to join, My cells go from range "O2" to "DW2", I don't fancy writing that for every single column!! Also, it means that If I have some empty fields, it will still add a break tag, this will look very odd on my site.
I really need a way of writing into the function "include if cell contains data" for each cell. If it doesn't contain anything, skip it and move to the next. (the char(10) in this just gives me a line break in excel so I can see what it'll look like when it's exported)
Using Excel 2007. Can I use IF along with CONCATENATE.
=if(h26<.0099(concatenate(ak26,AK27))if(h26>.010(concatenate(ak26,aQ26,ak27))
Can't seem to get the proper syntax.
